[coreboot] Overheating on f2a85-m

[qma ster]

Before investigating the software methods, in this situation I would have
tried to: using some great thermal paste, cleaning the dust, and - most
likely - switching to a manual fan control: there are the hardware fan
control adapters, and if you don't have those - temporarily you could just
wire your fan so that it will always work on the max speed instead of
taking the fan control commands from the motherboard

2017-03-26 22:35 GMT+03:00 Rudolf Marek <r.marek at assembler.cz>:

> Hi again,
>
> Sorry, I pasted wrong dump. Before I installed right /etc/sensors3.conf
>
> radeon-pci-0008
> Adapter: PCI adapter
> temp1:        +35.0°C  (crit = +120.0°C, hyst = +90.0°C)
>
> it8603-isa-0290
> Adapter: ISA adapter
> Vcore:        +1.27 V  (min =  +1.12 V, max =  +2.96 V)  ALARM
> in1:          +1.66 V  (min =  +2.69 V, max =  +0.08 V)  ALARM
> +12V:        +12.38 V  (min = +14.98 V, max =  +0.00 V)  ALARM
> +5V:          +5.07 V  (min =  +3.96 V, max =  +0.12 V)  ALARM
> in4:          +1.20 V  (min =  +1.92 V, max =  +0.12 V)  ALARM
> 3VSB:         +3.31 V  (min =  +0.79 V, max =  +2.88 V)  ALARM
> Vbat:         +3.14 V
> +3.3V:        +3.36 V
> CPU Fan:     2824 RPM  (min =  200 RPM)
> CHA Fan:        0 RPM  (min =  600 RPM)  ALARM
> CPU Temp:     +64.0°C  (low  = +50.0°C, high = -126.0°C)  ALARM  sensor =
> thermistor
> M/B Temp:     +38.0°C  (low  = +100.0°C, high = +122.0°C)  sensor =
> thermistor
> temp3:       -128.0°C  (low  = -24.0°C, high =  +0.0°C)  sensor =
> thermistor
> intrusion0:  OK
>
> k10temp-pci-00c3
> Adapter: PCI adapter
> temp1:        +48.9°C  (high = +70.0°C)
>                        (crit = +70.0°C, hyst = +69.0°C)
>
> Thanks
> Rudolf
>
> --
> coreboot mailing list: coreboot at coreboot.org
> https://www.coreboot.org/mailman/listinfo/coreboot
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20170327/613f208a/attachment.html>