[coreboot] UART on Apollo Lake

[Gailu Singh]

I got the info from my .config that UART on this board are 8250 memory
mapped UART instead of typical IO mapped. Looks like grub2 does not support
memory mapped UART.

On Wed, Mar 1, 2017 at 8:51 AM, Gailu Singh <gailu96 at gmail.com> wrote:

> Hi Experts,
>
> Are UARTs available on Apollo Lake different than traditional 8250 UART?
> Or any specific settings (jumper etc) required to use them?
>
> Problem Statement:
> I am using UART available (through micro USB port) on Leafhill CRB. I am
> able to get coreboot logs but grub fails to detect these uart.
>
> I have following in my grub2.cfg
> serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1
>
> Grub output an error
> serial port COM0 not found
>
> If I change --unit=0 to 1 or 2 grub2 reports similar error
>
> serial port COM1 not found
> serial port COM2 not found
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20170301/e1da5fe2/attachment.html>