[coreboot] GRUB boot menu is not showing GRUB2

[Zoran Stojsavljevic]

> After adding menu entry for fedora OS, I can able to see *boot menu
successfully*.. .

Case closed. Kudos to Mariusz.

Zoran out

On Thu, Jun 8, 2017 at 7:09 AM, Dhanasekar Jaganathan <
jdhanasekarmca at gmail.com> wrote:

> Hi Mariusz / Zoran,
>
> After adding the below lines only in grub.cfg which is suggest by Mariusz,
>
> serial --unit=1 --speed=115200 --word=8 --parity=no --stop=1
> terminal_input serial
> terminal_output serial
>
> I can able to see grub shell.
>
> After adding menu entry for fedora OS, I can able to see *boot menu
> successfully*..
>
> Now I am trying to install other OS (ONIE) through USB
>
> Thanks,
> Dhanasekar
>
> On Thu, Jun 8, 2017 at 10:05 AM, Zoran Stojsavljevic <
> zoran.stojsavljevic at gmail.com> wrote:
>
>> Marius,
>>
>> All Cool, I meant all of this what you wrote in there. In order of
>> appearance. We both lament about the same thing.
>>
>> Dhanasekar,
>>
>> You might add:
>> *GRUB_TERMINAL="serial" (and remove: "serial console")*
>> *GRUB_TERMINAL_INPUT="serial"*
>>
>> *GRUB_TERMINAL_OUTPUT="serial"*
>>
>> I know that you do have: GRUB_TERMINAL="serial console" . Just in case!
>>
>> Zoran
>>
>> On Thu, Jun 8, 2017 at 5:45 AM, Dhanasekar Jaganathan <
>> jdhanasekarmca at gmail.com> wrote:
>>
>>> Hi Zoran / Mariusz,
>>>
>>> Below, I have provided the contents of my /etc/default/grub,
>>>
>>> GRUB_TIMEOUT=-1
>>> GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"
>>> GRUB_DEFAULT=saved
>>> #GRUB_DISABLE_SUBMENU=true
>>> GRUB_SAVEDEFAULT=false
>>> GRUB_TERMINAL="serial console"
>>> GRUB_SERIAL_COMMAND="serial --speed=115200 --unit=1 --word=8 --parity=no
>>> --stop=1"
>>> GRUB_CMDLINE_LINUX="console=tty1 console=ttyS1,115200
>>> vconsole.font=latarcyrheb-sun16 $([ -x /usr/sbin/rhcrashkernel-param ]
>>> && /usr/sbin/rhcr"
>>> #GRUB_DISABLE_RECOVERY="true"
>>> GRUB_FORCE_HIDDEN_MENU="false"
>>> #GRUB_HIDDEN_TIMEOUT = 0
>>>
>>>
>>> Thanks,
>>> Dhanasekar
>>>
>>> On Thu, Jun 8, 2017 at 3:51 AM, Zoran Stojsavljevic <
>>> zoran.stojsavljevic at gmail.com> wrote:
>>>
>>>> Hello Mariusz,
>>>>
>>>> > Try adding below lines on top of your grub.cfg:
>>>>
>>>> Are you talking about this file: /etc/default/grub ?
>>>>
>>>> This is what I have on my Fedora 26 VM (CLI transcript follows):
>>>>
>>>> *[root at localhost grub.d]# cd /etc/default*
>>>> *[root at localhost default]# ls -al*
>>>> *total 28*
>>>> *drwxr-xr-x.   2 root root  4096 Jun  7 06:24 .*
>>>> *drwxr-xr-x. 160 root root 12288 Jun  7 23:52 ..*
>>>> *-rw-rw-r--.   1 root root   262 May 14 19:54 grub*
>>>> *-rw-r--r--.   1 root root  1756 Jun  5 16:10 nss*
>>>> *-rw-r--r--.   1 root root   119 Feb 12 01:42 useradd*
>>>> *[root at localhost default]# cat grub*
>>>> *GRUB_TIMEOUT=5*
>>>> *GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"*
>>>> *GRUB_DEFAULT=saved*
>>>> *GRUB_DISABLE_SUBMENU=true*
>>>> *GRUB_TERMINAL_OUTPUT="console"*
>>>> *GRUB_CMDLINE_LINUX="rd.lvm.lv <http://rd.lvm.lv>=fedora/root rd.lvm.lv
>>>> <http://rd.lvm.lv>=fedora/swap rhgb quiet"*
>>>> *GRUB_DISABLE_RECOVERY="true"*
>>>> *[root at localhost default]# pwd*
>>>> */etc/default*
>>>>
>>>> In such a case, which is, I think, one Politically Correct, the
>>>> following must be done:
>>>> [1] Whenever I modify */etc/defualt/grub*, I run *grub2-mkconfig -o
>>>> /boot/grub2/grub.cfg* ;
>>>> [2] Rebuild Coreboot!
>>>>
>>>> Hello Dhanasekar,
>>>>
>>>> What is the content of your */etc/default/grub ?*
>>>>
>>>> Should be the following (or similar):
>>>>
>>>> *GRUB_TIMEOUT=5*
>>>> *GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"*
>>>> *GRUB_DEFAULT=saved*
>>>> *GRUB_TERMINAL="serial"*
>>>> *GRUB_SERIAL_COMMAND="serial --speed=115200 --unit=1 --word=8
>>>> --parity=no --stop=1"*
>>>> *GRUB_TERMINAL_INPUT="serial"*
>>>> *GRUB_TERMINAL_OUTPUT="serial"*
>>>> *GRUB_CMDLINE_LINUX="rd.lvm.lv <http://rd.lvm.lv>=fedora/root rd.lvm.lv
>>>> <http://rd.lvm.lv>=fedora/swap"*
>>>> *GRUB_DISABLE_RECOVERY="true"*
>>>>
>>>> Zoran
>>>>
>>>> On Wed, Jun 7, 2017 at 5:36 PM, Mariusz via coreboot <
>>>> coreboot at coreboot.org> wrote:
>>>>
>>>>> Hi Dhanasekar,
>>>>>
>>>>> Try adding below lines on top of your grub.cfg:
>>>>>
>>>>> serial --unit=1 --speed=115200 --word=8 --parity=no --stop=1
>>>>> terminal_input serial
>>>>> terminal_output serial
>>>>>
>>>>> Then rebuild coreboot and try.
>>>>> Or try with grub.cfg containing only above three lines (you should get
>>>>> working grub shell)
>>>>>
>>>>> Mariusz
>>>>>
>>>>>
>>>>> W dniu 07.06.2017 o 15:38, Dhanasekar Jaganathan pisze:
>>>>>
>>>>>> Hi Nico,
>>>>>>
>>>>>> Following is my complete Payload setting,
>>>>>>
>>>>>> 1.Add a payload -> (GRUB2)
>>>>>> 2.GRUB2 version -> (HEAD)
>>>>>> 3.Include GRUB2 runtime config file into ROM image = Y
>>>>>> 4.Gave the path of grub.cfg (which I copied from Fedora OS when
>>>>>> booted is booted with other BIOS vendor).
>>>>>>
>>>>>> Based on this, please provide your comments.
>>>>>>
>>>>>> Thanks,
>>>>>> Dhanasekar
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> coreboot mailing list: coreboot at coreboot.org
>>>>> https://mail.coreboot.org/mailman/listinfo/coreboot
>>>>>
>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/coreboot/attachments/20170608/18c1b799/attachment.html>