[coreboot] SMBIOS table enablement in coreboot

[David Hendricks]

Hi Mayuri,
Do you have GENERATE_SMBIOS_TABLES enabled in your config?

On Fri, Jan 13, 2017 at 12:56 AM, Mayuri Tendulkar <
mayuri.tendulkar at aricent.com> wrote:

> Hi
>
> We are using coreboot for our board based on Intel Baytrail 3845.
>
>
>
> When we use *dmidecode –t *to get DDR details, we get empty. It means
> data is missing in SMBIOS.
>
>
>
> Are there any settings in coreboot to enable this?
>
>
>
> Regards
>
> Mayuri
> "DISCLAIMER: This message is proprietary to Aricent and is intended solely
> for the use of the individual to whom it is addressed. It may contain
> privileged or confidential information and should not be circulated or used
> for any purpose other than for what it is intended. If you have received
> this message in error, please notify the originator immediately. If you are
> not the intended recipient, you are notified that you are strictly
> prohibited from using, copying, altering, or disclosing the contents of
> this message. Aricent accepts no responsibility for loss or damage arising
> from the use of the information transmitted by this email including damage
> from virus."
>
> --
> coreboot mailing list: coreboot at coreboot.org
> https://www.coreboot.org/mailman/listinfo/coreboot
>



-- 
David Hendricks (dhendrix)
Systems Software Engineer, Google Inc.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20170113/63e0c6b2/attachment.html>