[coreboot] coreboot on KGPE-D16 "boot-loops"

[ron minnich]

I'd be curious to know if any ram you have works ...

On Mon, Jan 9, 2017 at 10:34 AM Pi Van Den Cirkel <opdecirkel at gmail.com>
wrote:

> Hey Timothy, I provided log for two cases.
> 1) With RAM: HMT42GR7CMR4C-G7 D8 AC - two modules, one module in slot A2
> The log is: https://paste.debian.net/hidden/83d4816c/ and repeats over
> and over again starting at:
>
> coreboot-4.5-771-gf3e2679-dirty Fri Jan  6 20:33:58 UTC 2017 romstage
> starting...
>
> 2) With RAM Module: Nanya 4GB 2Rx8 PC3-10600E-9-10-E0 1333 ECC
> (NT4GC72B8PG0NF-CG)
> The boot process blockes at: ```ERROR: PNP: 002e.b 70 irq size:
> 0x0000000001 not assigned```
> Full log: https://paste.debian.net/hidden/d38ffc04/
>
> Let me know if you want me to enable extra logging.
>
> Thank you for helping!
>
> Another one with:
>
> On Mon, Jan 9, 2017 at 11:42 AM, Timothy Pearson
> <tpearson at raptorengineering.com> wrote:
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA1
> >
> > On 01/09/2017 10:27 AM, Taiidan at gmx.com wrote:
> >> I don't know if this is the same problem as I lack a null modem cable
> >> but mine sometimes takes 30 seconds or so to actually boot and show vga
> >> output.
> >>
> >> If I flip the power switch and turn it back on after a little while I
> >> have to wait much longer, in the meantime the PWM fans are off and it is
> >> dead to the world.
> >>
> >> There is also a problem where loading the kernel too fast results in an
> >> immediate reboot, I must wait at the grub screen for 15 seconds or so if
> >> I don't want this to happen
> >>
> >>
> >> I am curious do you guys have a uniprocessor system without the second
> >> 8pin connection?
> >>
> >
> > Could I get full coreboot serial boot logs from both of these machines?
> >  Without the logs I would just be guessing.
> >
> > Thanks!
> >
> > - --
> > Timothy Pearson
> > Raptor Engineering
> > +1 (415) 727-8645 <(415)%20727-8645> (direct line)
> > +1 (512) 690-0200 <(512)%20690-0200> (switchboard)
> > https://www.raptorengineering.com
> > -----BEGIN PGP SIGNATURE-----
> > Version: GnuPG v1
> > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
> >
> > iQEcBAEBAgAGBQJYc71pAAoJEK+E3vEXDOFby+gH/3fcHF3FdnSYklKTyjURqc8L
> > DXfIMyLQrBmMZKPcTFqBEriWyIon4qXEZJ/1lshO+7gjMLmk+Q2QC/Kjc7hux2Z1
> > gEzfalAUX8L+nhtEQJI3CtyX2GhiIj2oC7uifAlthcI/DAwoK52UQtdfDcJ8pSh4
> > iBLDgS6XK22i+NgUvDare41sAp8Ibg+emOA8CQ2azl/CYIQv9x1MrU8T8e9j/3mt
> > 7bBPRZ1UrlT3rqy6a1kp/cA1CnyW4JkiAaVq7v+sZfc/CTAPdDf3Bb0/Te07//yg
> > n6JbsQsh6IVqFCjlt6eM54xMD/aNCrVd9bbXKjyFBYJtTx0t8UDglXmVPepg8l4=
> > =nxZ6
> > -----END PGP SIGNATURE-----
>
> --
> coreboot mailing list: coreboot at coreboot.org
> https://www.coreboot.org/mailman/listinfo/coreboot
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20170109/70e69cbb/attachment.html>