[coreboot] "FCH SPI: Too much to write" on KGPE-D16

[Iru Cai]

Hello,

I've set up a computer with Asus KGPE-D16 recently. I use an Winbond
W25Q64.V 8M flash chip and tested with this config with only ROM size
changed:

https://review.coreboot.org/gitweb/cgit/board-status.git/tree/asus/kgpe-d16/4.5-759-gab8f7d3/2017-01-04T21_18_55Z/config.short.txt

And it can boot to my OS on disk. However, after I enabled the serial
console, I can only see:
"FCH SPI: Too much to write. Does your SPI chip driver use
spi_crop_chunk()?"

And the machine cannot boot.

Has anyone seen this issue before?

Thanks,
Iru

-- 
Please do not send me Microsoft Office/Apple iWork documents. Send
OpenDocument instead! http://fsf.org/campaigns/opendocument/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20170105/4f5fd1e2/attachment.html>