[coreboot] KGPE-D16 and Samsung DDR3L memory sticks

Timothy Pearson tpearson at raptorengineering.com
Wed Feb 15 17:22:59 CET 2017


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 02/15/2017 08:07 AM, Daniel Kulesz via coreboot wrote:
> Hi folks,
> 
> after a lengthy bisection run I was able to nail down the commit which is causing the MC4 errors in the configurations I tested. I reverted the commit on top of current master, and now my KGPE-D16 fully works without MC4 errors in both 1-CPU-package und 2-CPU-package configurations - that is, with all 16 memory slots populated with the 8GB DDR3L Samsung RDIMMs (PC12800 variant) mentioned in my initial post.

Thank you for working on that bisect, and for isolating the exact commit
causing the problem!

However, we are going to need additional input from other owners of the
KGPE-D16 to verify that a simple revert does not break support for the
DIMMs installed in their machines.  In particular, I am interested in
test reports from those with Kingston RDIMMs since they seemed to be
among the most finicky.

> However, the issue with memory clock (being reported at) 667MHz in dmidecode still remains.

Can you please send over a debug log at SPEW level showing the romstage
boot process for 4 DIMMs?  The only log I have right now is for 8.

Thanks!

- -- 
Timothy Pearson
Raptor Engineering
+1 (415) 727-8645 (direct line)
+1 (512) 690-0200 (switchboard)
https://www.raptorengineering.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iQEcBAEBAgAGBQJYpIBjAAoJEK+E3vEXDOFbCkcH/Rq4i+UD+Ow13LKPczZmwUAL
YXSPkCx4dJBRxBxB0BV9ikzsRpLC91hkxqg6T4RN+Bgla8hQF+Gj17PV9D/S9Kif
+O0b7F8NVcx1hY1RPSWztm7fcWCz40yrla0JCSSVNkkWEGQVrCx9KgxIcsS2YmIC
iKGuTxDUSN63WSBNqMxpYcwH88iJZQiPM3/cOp2EZ6dLCWgeGEhWyDlkbvwK+VFr
cyuibAU2zgCLU2wlQ/30uCnoFCbdNCQ4m+YfVCeeU0DlJDO18OOsC5azogG0MASr
7PnUIqqsmKa8TciJPPTsXi/LZmlsZry9Db2GXOvKRb72NXviIKhbxZ0UBZRtnxc=
=YsB1
-----END PGP SIGNATURE-----



More information about the coreboot mailing list