[coreboot] BDX-DE PCI init fail

[David Hendricks]

Hi Hilbert,
Have you had any luck? I have a board with a similar problem. Commenting
out the entry for device 1f.3 in devicetree.cb seemed to help (I copied
src/mainboard/intel/camelbackmountain_fsp for my project).

On Wed, Dec 27, 2017 at 2:17 AM, Hilbert Tu(杜睿哲_Pegatron) <
Hilbert_Tu at pegatroncorp.com> wrote:

> Hi,
>
>
>
> I am porting coreboot on Intel BDX-DE platform and it gets stuck when init
> PCI 00:1f.3. This device should be SMBus, serial management bus. But I
> don’t know why this happened. Does anyone can give me some hint? Attached
> is my boot up log. Thanks in advance.
>
>
>
> -Hilbert
> This e-mail and its attachment may contain information that is
> confidential or privileged, and are solely for the use of the individual to
> whom this e-mail is addressed. If you are not the intended recipient or
> have received it accidentally, please immediately notify the sender by
> reply e-mail and destroy all copies of this email and its attachment.
> Please be advised that any unauthorized use, disclosure, distribution or
> copying of this email or its attachment is strictly prohibited.
> 本電子郵件及其附件可能含有機密或依法受特殊管制之資訊，僅供本電子郵件之受文者使用。台端如非本電子郵件之受文者或誤收本電子
> 郵件，請立即回覆郵件通知寄件人，並銷毀本電子郵件之所有複本及附件。任何未經授權而使用、揭露、散佈或複製本電子郵件或其附件之行為，皆嚴格禁止。
>
> --
> coreboot mailing list: coreboot at coreboot.org
> https://mail.coreboot.org/mailman/listinfo/coreboot
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/coreboot/attachments/20171228/c64f5579/attachment.html>