[coreboot] Blank screen during boot and max CPU fan speed for ASUS KGPE-D16
shambles_09 at hotmail.com
Wed Dec 6 09:07:12 CET 2017
Thanks for the info about the fans Tim, Zoran, and Taiidan.
I haven't tried to use fancontrol yet, so I'm confident that will be the solution to my fan issue.
From: Zoran Stojsavljevic <zoran.stojsavljevic at gmail.com>
Sent: 05 December 2017 23:31
To: Taiidan at gmx.com
Cc: Timothy Pearson; coreboot at coreboot.org; Daniel K
Subject: Re: [coreboot] Blank screen during boot and max CPU fan speed for ASUS KGPE-D16
> Naah as tim said you just have to run fancontrol or use Raptor's OpenBMC port for the KGPE-D16/KCMA-D8 boards.
I got it. Raptor's OpenBMC port for the KGPE-D16/KCMA-D8 boards module should/must be included in Debian distro
as driver addendum. In this case it is not.
On Wed, Dec 6, 2017 at 6:56 AM, Taiidan at gmx.com<mailto:Taiidan at gmx.com> <Taiidan at gmx.com<mailto:Taiidan at gmx.com>> wrote:
On 12/06/2017 12:35 AM, Zoran Stojsavljevic wrote:
The full speed fan is normal. These are server boards and coreboot
*purposefully sets the fans to full speed until the OS boots* and can take
over fan control duties via 'fancontrol'  or a similar application.
Note that the 'w83795' kernel module is required for this to work.
Correct me if I am wrong, but how I understood the topic/problem, the fans
continue to blow full speed indefinitely even after OS boots, don't they?
Naah as tim said you just have to run fancontrol or use Raptor's OpenBMC port for the KGPE-D16/KCMA-D8 boards.
Additionally I added this info to the wiki many months ago, as I too was bothered by the fan speed when I first installed coreboot years ago and assumed something was broken to which tim explained it for me too :D
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the coreboot