[coreboot] i946GZ test

Stefan Reinauer stefan.reinauer at coreboot.org
Sat Oct 29 00:47:53 CEST 2016

* Riko Ho <antonius.riko at gmail.com> [161019 06:29]:
> Hello everyone..
>  I've put W39F040FCPZ on the board...but I can not see any messages on
> serial...
> I can hear tuck tuck on motherboard buzzard....repeatedly
> command : sudo putty /dev/ttyUSB0 -serial -sercfg 115200,8,n,1,N on the host
> What should I do next to debug ?
> Cheers

Use a scope or a bus analyzer to figure out whether you are executing
code, and where you die. Check your SuperIO init code to see if you are
doing the right thing.


More information about the coreboot mailing list