[coreboot] Intel Baytrail E3845 Coreboot - Not booting after modifying CMOS boot_option

[Mohan Shanmuga Sundaram]

Dear Coreboot Community!
I have modified the following CMOS option table bit using 'nvramtool' utility from Ubuntu:
384          1       e       4        boot_option

Its default value was 'Normal', which I modified to 'Fallback'. After rebooting, the coreboot seems to be not loading the default payload.
In what way I can recover it?
Where does the CMOS modification resides?

I have redone the coreboot.rom flashing completely, yet the coreboot didn't load the default payload. The following is my CBFS:
Performing operation on 'COREBOOT' region...
Name                           Offset     Type         Size
cbfs master header             0x0        cbfs header  32
fallback/romstage              0x80       stage        30868
cpu_microcode_blob.bin         0x7980     microcode    208896
fallback/ramstage              0x3aa00    stage        51629
config                         0x47400    raw          749
revision                       0x47740    raw          575
cmos_layout.bin                0x479c0    cmos_layout  1212
pci8086,0f31.rom               0x47ec0    optionrom    65536
fallback/dsdt.aml              0x57f40    raw          12527
fallback/payload               0x5b080    payload      61165
payload_config                 0x69fc0    raw          1563
payload_revision               0x6a640    raw          243
(empty)                        0x6a780    null         1333016
fsp.bin                        0x1afec0   fsp          294912
(empty)                        0x1f7f00   null         30168
bootblock                      0x1ff500   bootblock    2480

Regards,
Mohan

"DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20161013/8abc677d/attachment.html>