[coreboot] Debug builds and memory testing
naveed.ghori at dti.com.au
Tue May 31 06:45:09 CEST 2016
I was using DDR3 instead of the low voltage DDR3L
From: Mayuri Tendulkar [mailto:mayuri.tendulkar at aricent.com]
Sent: Tuesday, 31 May 2016 12:40 PM
To: Naveed Ghori; coreboot
Subject: Re: Debug builds and memory testing
How u resolved memory issue?
From: coreboot [mailto:coreboot-bounces at coreboot.org] On Behalf Of Naveed Ghori
Sent: 31 May 2016 06:52
To: coreboot <coreboot at coreboot.org<mailto:coreboot at coreboot.org>>
Subject: Re: [coreboot] Debug builds and memory testing
To update this: There are option in the menuconfig to enable various debugging options and logs.
From: Naveed Ghori
Sent: Tuesday, 24 May 2016 2:04 PM
Subject: Debug builds and memory testing
Is there a debug build of coreboot or a way to test memory very early on.
My custom board goes through the romstage just fine but stops booting while trying to enumerate the buses.
I am suspecting RAM might be an issue so would like to eliminate that by doing a memory test on it.
Show all devs... Before device enumeration.
Thanks in advance,
"DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus."
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the coreboot