[coreboot] Serial prints not coming on Minnowboard Turbot

[Mayuri Tendulkar]

Hi

I have built coreboot using Minnowmax config file in coreboot with seabios payload.

I don't see any serial console prints. Can you please confirm what could be the issue?

If I flash Minnowboard Max file given on intel site, everything works fine and I see UEFI shell prompt.

Regards
Mayuri

"DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20160505/2194bb49/attachment.html>