[coreboot] The GbE is not activated on my Board.

WANG FEI wangfei.jimei at gmail.com
Mon Jun 20 23:58:53 CEST 2016


Here is a sample,

Please select INCLUDE_ME to y and set ME_PATH to point to your
descriptor.bin (Path/descriptor.bin, refer to FSP_FILE as a sample).

On Mon, Jun 20, 2016 at 10:48 PM, WANG FEI <wangfei.jimei at gmail.com> wrote:

> YuSeok, how did you attach the descriptor.bin to your coreboot? Did you
> follow the previous mail to include descriptor.bin with INCLUDE_ME and
> ME_PATH in .config?
>
> On Mon, Jun 20, 2016 at 6:46 AM, 김유석 <poplinux0 at gmail.com> wrote:
>
>> Dear Sir.
>>
>>
>> My ENV
>>
>>   EVB : ADI SG-2440
>>
>>   source : official coreboot
>>
>>   FSP : intel FSP 4.0
>>
>>
>>
>> I was successfully build-up the coreboot and successfully boot-up my EVB.
>>
>>
>> But My EVB's GbE is not activated(not running.)
>>
>>
>> So, I was try to boot using the original OEM bios(from ADI). *This image
>> is **act**vate the GbE*.
>>
>>
>> Another developer was same quetion to Coreboot communite. And He is
>> resolved this issue.
>>
>> <https://www.coreboot.org/pipermail/coreboot/2015-January/079074.html>
>> https://www.coreboot.org/pipermail/coreboot/2015-January/079074.html
>>
>>
>> This guy's said that "Must add the descriptor.bin to coreboot.bin".
>>
>>
>> So, I was extract the descriptor.bin from ADI's coreboot.bin
>>
>> And successfully attached the descriptor.bin to my coreboot.bin.
>>
>>   *oem_dumped.bin => ADI's default **coreboot.bin, This image are
>> activated the GbE.*
>>
>>   *poplinux at raw bins $ >* ./ifdtool -x src/oem_dumped.bin
>>   File src/oem_dumped.bin is 8388608 bytes
>>     Flash Region 0 (Flash Descriptor): 00000000 - 0000ffff
>>     Flash Region 1 (BIOS): 00010000 - 007fffff
>>     Flash Region 2 (Intel ME): 00fff000 - 00000fff (unused)
>>     Flash Region 3 (GbE): 00fff000 - 00000fff (unused)
>>     Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused)
>>
>>   *poplinux at raw bins $ >* ln -s ./flashregion_0_flashdescriptor.bin
>> descriptor.bin
>>   *poplinux at raw bins $ >* ./ifdtool -d ./descriptor.bin
>>   File ./descriptor.bin is 65536 bytes
>>   FLMAP0:    0x01040003
>>     NR:      1
>>     FRBA:    0x40
>>     NC:      1
>>     FCBA:    0x30
>>   FLMAP1:    0x09100206
>>     ISL:     0x09
>>     FPSBA:   0x100
>>     NM:      2
>>     FMBA:    0x60
>>   FLMAP2:    0x00210020
>>     PSL:     0x2100
>>     FMSBA:   0x200
>>   FLUMAP1:   0x000002e0
>>     Intel ME VSCC Table Length (VTL):        2
>>     Intel ME VSCC Table Base Address (VTBA): 0x000e00
>>
>>   ME VSCC table:
>>     JID0:  0x001740ef
>>       SPI Componend Device ID 1:          0x17
>>       SPI Componend Device ID 0:          0x40
>>       SPI Componend Vendor ID:            0xef
>>     VSCC0: 0x20052005
>>       Lower Erase Opcode:                 0x20
>>       Lower Write Enable on Write Status: 0x50
>>       Lower Write Status Required:        No
>>       Lower Write Granularity:            64 bytes
>>       Lower Block / Sector Erase Size:    4KB
>>       Upper Erase Opcode:                 0x20
>>       Upper Write Enable on Write Status: 0x50
>>       Upper Write Status Required:        No
>>       Upper Write Granularity:            64 bytes
>>       Upper Block / Sector Erase Size:    4KB
>>
>>   OEM Section:
>>   00: 31 31 35 32 31 35 30 39 32 30 00 00 00 00 00 00
>>   10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>   20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>   30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>
>>   Found Region Section
>>   FLREG0:    0x000f0000
>>     Flash Region 0 (Flash Descriptor): 00000000 - 0000ffff
>>   FLREG1:    0x07ff0010
>>     Flash Region 1 (BIOS): 00010000 - 007fffff
>>   FLREG2:    0x00000fff
>>     Flash Region 2 (Intel ME): 00fff000 - 00000fff (unused)
>>   FLREG3:    0x00000fff
>>     Flash Region 3 (GbE): 00fff000 - 00000fff (unused)
>>   FLREG4:    0x00000fff
>>     Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused)
>>
>>   Found Component Section
>>   FLCOMP     0x09200024
>>     Dual Output Fast Read Support:       not supported
>>     Read ID/Read Status Clock Frequency: 33MHz
>>     Write/Erase Clock Frequency:         33MHz
>>     Fast Read Clock Frequency:           33MHz
>>     Fast Read Support:                   not supported
>>     Read Clock Frequency:                20MHz
>>     Component 2 Density:                 8MB
>>     Component 1 Density:                 8MB
>>   FLILL      0x00000000
>>     Invalid Instruction 3: 0x00
>>     Invalid Instruction 2: 0x00
>>     Invalid Instruction 1: 0x00
>>     Invalid Instruction 0: 0x00
>>   FLPB       0x00000000
>>     Flash Partition Boundary Address: 0x000000
>>
>>   Found PCH Strap Section
>>   PCHSTRP0:  0x00080002
>>   PCHSTRP1:  0x00000000
>>   PCHSTRP2:  0x00000000
>>   PCHSTRP3:  0x00000003
>>   PCHSTRP4:  0x0000007f
>>   PCHSTRP5:  0x007fffc0
>>   PCHSTRP6:  0x0001c7c0
>>   PCHSTRP7:  0x00000624
>>   PCHSTRP8:  0x00000000
>>   PCHSTRP9:  0xffffffff
>>   PCHSTRP10: 0xffffffff
>>   PCHSTRP11: 0xffffffff
>>   PCHSTRP12: 0xffffffff
>>   PCHSTRP13: 0xffffffff
>>   PCHSTRP14: 0xffffffff
>>   PCHSTRP15: 0xffffffff
>>   PCHSTRP16: 0xffffffff
>>   PCHSTRP17: 0xffffffff
>>
>>   Found Master Section
>>   FLMSTR1:   0x1f1f0000 (Host CPU/BIOS)
>>     Platform Data Region Write Access: enabled
>>     GbE Region Write Access:           enabled
>>     Intel ME Region Write Access:      enabled
>>     Host CPU/BIOS Region Write Access: enabled
>>     Flash Descriptor Write Access:     enabled
>>     Platform Data Region Read Access:  enabled
>>     GbE Region Read Access:            enabled
>>     Intel ME Region Read Access:       enabled
>>     Host CPU/BIOS Region Read Access:  enabled
>>     Flash Descriptor Read Access:      enabled
>>     Requester ID:                      0x0000
>>
>>   FLMSTR2:   0x08090118 (Intel ME)
>>     Platform Data Region Write Access: disabled
>>     GbE Region Write Access:           enabled
>>     Intel ME Region Write Access:      disabled
>>     Host CPU/BIOS Region Write Access: disabled
>>     Flash Descriptor Write Access:     disabled
>>     Platform Data Region Read Access:  disabled
>>     GbE Region Read Access:            enabled
>>     Intel ME Region Read Access:       disabled
>>     Host CPU/BIOS Region Read Access:  disabled
>>     Flash Descriptor Read Access:      enabled
>>     Requester ID:                      0x0118
>>
>>   FLMSTR3:   0xffffffff (GbE)
>>     Platform Data Region Write Access: enabled
>>     GbE Region Write Access:           enabled
>>     Intel ME Region Write Access:      enabled
>>     Host CPU/BIOS Region Write Access: enabled
>>     Flash Descriptor Write Access:     enabled
>>     Platform Data Region Read Access:  enabled
>>     GbE Region Read Access:            enabled
>>     Intel ME Region Read Access:       enabled
>>     Host CPU/BIOS Region Read Access:  enabled
>>     Flash Descriptor Read Access:      enabled
>>     Requester ID:                      0xffff
>>
>>   Found Processor Strap Section
>>   ????:      0xffffffff
>>   ????:      0xffffffff
>>   ????:      0xffffffff
>>   ????:      0xffffffff
>>
>>
>> But GbE is still de-activated. boot log is see below.
>>
>>
>>   PCI: pci_scan_bus for bus 00
>>   PCI: 00:00.0 [8086/0000] ops
>>   PCI: 00:00.0 [8086/1f0e] enabled
>>   Capability: type 0x10 @ 0x40
>>   Capability: type 0x01 @ 0x80
>>   Capability: type 0x0d @ 0x88
>>   Capability: type 0x05 @ 0x90
>>   Capability: type 0x10 @ 0x40
>>   PCI: 00:01.0 subordinate bus PCI Express
>>   PCI: 00:01.0 [8086/1f10] enabled
>>   PCI: Static device PCI: 00:02.0 not found, disabling it.
>>   Capability: type 0x10 @ 0x40
>>   Capability: type 0x01 @ 0x80
>>   Capability: type 0x0d @ 0x88
>>   Capability: type 0x05 @ 0x90
>>   Capability: type 0x10 @ 0x40
>>   PCI: 00:03.0 subordinate bus PCI Express
>>   PCI: 00:03.0 [8086/1f12] enabled
>>   PCI: Static device PCI: 00:04.0 not found, disabling it.
>>   PCI: 00:0b.0 [8086/1f18] enabled
>>   PCI: 00:0e.0 [8086/1f14] enabled
>>   PCI: 00:0f.0 [8086/1f16] enabled
>>   PCI: 00:13.0 [8086/1f15] enabled
>> *  PCI: Static device PCI: 00:14.0 not found, disabling it.*
>> *  PCI: Static device PCI: 00:14.1 not found, disabling it.*
>> *  PCI: Static device PCI: 00:14.2 not found, disabling it.*
>> *  PCI: Static device PCI: 00:14.3 not found, disabling it*.
>>
>>
>> I don't have a any idea for activate the GbE.
>>
>>
>> Please advise to me.
>>
>> Thank you.
>>
>>
>>
>>
>>
>> --
>> coreboot mailing list: coreboot at coreboot.org
>> https://www.coreboot.org/mailman/listinfo/coreboot
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20160620/1a83a25d/attachment.html>


More information about the coreboot mailing list