[coreboot] The GbE is not activated on my Board.
WANG FEI
wangfei.jimei at gmail.com
Mon Jun 20 23:48:01 CEST 2016
YuSeok, how did you attach the descriptor.bin to your coreboot? Did you
follow the previous mail to include descriptor.bin with INCLUDE_ME and
ME_PATH in .config?
On Mon, Jun 20, 2016 at 6:46 AM, 김유석 <poplinux0 at gmail.com> wrote:
> Dear Sir.
>
>
> My ENV
>
> EVB : ADI SG-2440
>
> source : official coreboot
>
> FSP : intel FSP 4.0
>
>
>
> I was successfully build-up the coreboot and successfully boot-up my EVB.
>
>
> But My EVB's GbE is not activated(not running.)
>
>
> So, I was try to boot using the original OEM bios(from ADI). *This image
> is **act**vate the GbE*.
>
>
> Another developer was same quetion to Coreboot communite. And He is
> resolved this issue.
>
> <https://www.coreboot.org/pipermail/coreboot/2015-January/079074.html>
> https://www.coreboot.org/pipermail/coreboot/2015-January/079074.html
>
>
> This guy's said that "Must add the descriptor.bin to coreboot.bin".
>
>
> So, I was extract the descriptor.bin from ADI's coreboot.bin
>
> And successfully attached the descriptor.bin to my coreboot.bin.
>
> *oem_dumped.bin => ADI's default **coreboot.bin, This image are
> activated the GbE.*
>
> *poplinux at raw bins $ >* ./ifdtool -x src/oem_dumped.bin
> File src/oem_dumped.bin is 8388608 bytes
> Flash Region 0 (Flash Descriptor): 00000000 - 0000ffff
> Flash Region 1 (BIOS): 00010000 - 007fffff
> Flash Region 2 (Intel ME): 00fff000 - 00000fff (unused)
> Flash Region 3 (GbE): 00fff000 - 00000fff (unused)
> Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused)
>
> *poplinux at raw bins $ >* ln -s ./flashregion_0_flashdescriptor.bin
> descriptor.bin
> *poplinux at raw bins $ >* ./ifdtool -d ./descriptor.bin
> File ./descriptor.bin is 65536 bytes
> FLMAP0: 0x01040003
> NR: 1
> FRBA: 0x40
> NC: 1
> FCBA: 0x30
> FLMAP1: 0x09100206
> ISL: 0x09
> FPSBA: 0x100
> NM: 2
> FMBA: 0x60
> FLMAP2: 0x00210020
> PSL: 0x2100
> FMSBA: 0x200
> FLUMAP1: 0x000002e0
> Intel ME VSCC Table Length (VTL): 2
> Intel ME VSCC Table Base Address (VTBA): 0x000e00
>
> ME VSCC table:
> JID0: 0x001740ef
> SPI Componend Device ID 1: 0x17
> SPI Componend Device ID 0: 0x40
> SPI Componend Vendor ID: 0xef
> VSCC0: 0x20052005
> Lower Erase Opcode: 0x20
> Lower Write Enable on Write Status: 0x50
> Lower Write Status Required: No
> Lower Write Granularity: 64 bytes
> Lower Block / Sector Erase Size: 4KB
> Upper Erase Opcode: 0x20
> Upper Write Enable on Write Status: 0x50
> Upper Write Status Required: No
> Upper Write Granularity: 64 bytes
> Upper Block / Sector Erase Size: 4KB
>
> OEM Section:
> 00: 31 31 35 32 31 35 30 39 32 30 00 00 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> Found Region Section
> FLREG0: 0x000f0000
> Flash Region 0 (Flash Descriptor): 00000000 - 0000ffff
> FLREG1: 0x07ff0010
> Flash Region 1 (BIOS): 00010000 - 007fffff
> FLREG2: 0x00000fff
> Flash Region 2 (Intel ME): 00fff000 - 00000fff (unused)
> FLREG3: 0x00000fff
> Flash Region 3 (GbE): 00fff000 - 00000fff (unused)
> FLREG4: 0x00000fff
> Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused)
>
> Found Component Section
> FLCOMP 0x09200024
> Dual Output Fast Read Support: not supported
> Read ID/Read Status Clock Frequency: 33MHz
> Write/Erase Clock Frequency: 33MHz
> Fast Read Clock Frequency: 33MHz
> Fast Read Support: not supported
> Read Clock Frequency: 20MHz
> Component 2 Density: 8MB
> Component 1 Density: 8MB
> FLILL 0x00000000
> Invalid Instruction 3: 0x00
> Invalid Instruction 2: 0x00
> Invalid Instruction 1: 0x00
> Invalid Instruction 0: 0x00
> FLPB 0x00000000
> Flash Partition Boundary Address: 0x000000
>
> Found PCH Strap Section
> PCHSTRP0: 0x00080002
> PCHSTRP1: 0x00000000
> PCHSTRP2: 0x00000000
> PCHSTRP3: 0x00000003
> PCHSTRP4: 0x0000007f
> PCHSTRP5: 0x007fffc0
> PCHSTRP6: 0x0001c7c0
> PCHSTRP7: 0x00000624
> PCHSTRP8: 0x00000000
> PCHSTRP9: 0xffffffff
> PCHSTRP10: 0xffffffff
> PCHSTRP11: 0xffffffff
> PCHSTRP12: 0xffffffff
> PCHSTRP13: 0xffffffff
> PCHSTRP14: 0xffffffff
> PCHSTRP15: 0xffffffff
> PCHSTRP16: 0xffffffff
> PCHSTRP17: 0xffffffff
>
> Found Master Section
> FLMSTR1: 0x1f1f0000 (Host CPU/BIOS)
> Platform Data Region Write Access: enabled
> GbE Region Write Access: enabled
> Intel ME Region Write Access: enabled
> Host CPU/BIOS Region Write Access: enabled
> Flash Descriptor Write Access: enabled
> Platform Data Region Read Access: enabled
> GbE Region Read Access: enabled
> Intel ME Region Read Access: enabled
> Host CPU/BIOS Region Read Access: enabled
> Flash Descriptor Read Access: enabled
> Requester ID: 0x0000
>
> FLMSTR2: 0x08090118 (Intel ME)
> Platform Data Region Write Access: disabled
> GbE Region Write Access: enabled
> Intel ME Region Write Access: disabled
> Host CPU/BIOS Region Write Access: disabled
> Flash Descriptor Write Access: disabled
> Platform Data Region Read Access: disabled
> GbE Region Read Access: enabled
> Intel ME Region Read Access: disabled
> Host CPU/BIOS Region Read Access: disabled
> Flash Descriptor Read Access: enabled
> Requester ID: 0x0118
>
> FLMSTR3: 0xffffffff (GbE)
> Platform Data Region Write Access: enabled
> GbE Region Write Access: enabled
> Intel ME Region Write Access: enabled
> Host CPU/BIOS Region Write Access: enabled
> Flash Descriptor Write Access: enabled
> Platform Data Region Read Access: enabled
> GbE Region Read Access: enabled
> Intel ME Region Read Access: enabled
> Host CPU/BIOS Region Read Access: enabled
> Flash Descriptor Read Access: enabled
> Requester ID: 0xffff
>
> Found Processor Strap Section
> ????: 0xffffffff
> ????: 0xffffffff
> ????: 0xffffffff
> ????: 0xffffffff
>
>
> But GbE is still de-activated. boot log is see below.
>
>
> PCI: pci_scan_bus for bus 00
> PCI: 00:00.0 [8086/0000] ops
> PCI: 00:00.0 [8086/1f0e] enabled
> Capability: type 0x10 @ 0x40
> Capability: type 0x01 @ 0x80
> Capability: type 0x0d @ 0x88
> Capability: type 0x05 @ 0x90
> Capability: type 0x10 @ 0x40
> PCI: 00:01.0 subordinate bus PCI Express
> PCI: 00:01.0 [8086/1f10] enabled
> PCI: Static device PCI: 00:02.0 not found, disabling it.
> Capability: type 0x10 @ 0x40
> Capability: type 0x01 @ 0x80
> Capability: type 0x0d @ 0x88
> Capability: type 0x05 @ 0x90
> Capability: type 0x10 @ 0x40
> PCI: 00:03.0 subordinate bus PCI Express
> PCI: 00:03.0 [8086/1f12] enabled
> PCI: Static device PCI: 00:04.0 not found, disabling it.
> PCI: 00:0b.0 [8086/1f18] enabled
> PCI: 00:0e.0 [8086/1f14] enabled
> PCI: 00:0f.0 [8086/1f16] enabled
> PCI: 00:13.0 [8086/1f15] enabled
> * PCI: Static device PCI: 00:14.0 not found, disabling it.*
> * PCI: Static device PCI: 00:14.1 not found, disabling it.*
> * PCI: Static device PCI: 00:14.2 not found, disabling it.*
> * PCI: Static device PCI: 00:14.3 not found, disabling it*.
>
>
> I don't have a any idea for activate the GbE.
>
>
> Please advise to me.
>
> Thank you.
>
>
>
>
>
> --
> coreboot mailing list: coreboot at coreboot.org
> https://www.coreboot.org/mailman/listinfo/coreboot
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20160620/41d2900c/attachment.html>
More information about the coreboot
mailing list