[coreboot] What purpose this IC(eeprom)?

[ron minnich]

Given its name (SPD) it sure seems like SPD.

As to your not being able to address it, a lot of times this can happen if
there is an SMBUS mux on the board and it's not set up on POR so you can
see that device.

ron

On Thu, Jun 2, 2016 at 6:53 PM 김유석 <poplinux0 at gmail.com> wrote:

> Dear Sir.
>
> MY EVB is ADI SG-2440.
>
> I was found some eeprom on my evb.
>
>
> This eeprom(CAT24C0EYI-GT3) is store the config of SDRAM. *I gu**ess.*
>
> So, I was search ADDR 0xA0 and procedure of config for sdram from coreboot
> source tree.
>
> But can't found hands on ADDR 0xA0 and found the some structure for config
> of sdram, but not used this strcture.
>
>
> Could you explain to me that "*Role of this eeprom*".
>
> Thank you.
>
>
>
>
>
> --
> coreboot mailing list: coreboot at coreboot.org
> https://www.coreboot.org/mailman/listinfo/coreboot
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20160603/f505209e/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: u25.jpg
Type: image/jpeg
Size: 144741 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20160603/f505209e/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: u25.jpg
Type: image/jpeg
Size: 144741 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20160603/f505209e/attachment-0003.jpg>