[coreboot] Issues building a ROM for Toshiba Chromebook 2 (aka Swanky)

Matt DeVillier matt.devillier at gmail.com
Sat Feb 27 02:43:21 CET 2016

On 2/26/2016 5:48 PM, Julius Werner wrote:
>>>> 2) I've also seen mention of Servo, but I don't seen any such header on
>>>> my board. Looking at a photo of the Acer C720 here, it does look like
>>>> there's an oblong space with pads there, but that would be a hell of a
>>>> surface mounting job:
>>>> https://www.chromium.org/chromium-os/developer-information-for-chrome-os-devices/acer-c720-chromebook
> Yes, you'll likely not get very far without a serial console, and the
> only way to get that is with a soldering iron. The good news is that
> you shouldn't need the full Servo header... just the two AP UART lines
> is enough (should be pin 16 and 17). You can find the whole Servo
> pinout at https://www.chromium.org/chromium-os/servo/chromium_os_yoshi_flex.tar.gz
thanks to Stefan and Aaron I've got a servo en route and arriving 
Monday, hopefully will have some time early next week to get it setup 
and start playing with it.

More information about the coreboot mailing list