[coreboot] minnowboardmax coreboot intel uefi payload :Failed to find the required acpi table

DM365 1395158558 at qq.com
Tue Jul 7 03:58:46 CEST 2015


Hello!
      I tested intel uefi payload instead of seabios in coreboot minnowboard max .
      It failed with "Failed to find the required acpi table ".
      If I use seabios payload ,the bios runs ok!
      I followed "http://www.elinux.org/Minnowboard:MinnowMaxCoreboot" to build coreboot.
      I used "https://firmware.intel.com/develop/" 2014-WW26-UEFI.coreboot.Payload.zip to builed uefi in coreboot.
      The whole terminal log is :
   POST: 0x4a
POST: 0x4b
POST: 0x4c
POST: 0x4d
POST: 0x4e
POST: 0x4f
POST: 0x39
POST: 0x80
POST: 0x70
POST: 0x71
POST: 0x72
POST: 0x24
POST: 0x25
POST: 0x24
POST: 0x25
POST: 0x55
POST: 0x24
POST: 0x25
POST: 0x55
POST: 0x55
POST: 0x73
APIC: 00 missing read_resources
PCI: 00:00.0 missing set_resources
POST: 0x74
POST: 0x75
POST: 0x75
POST: 0x93
POST: 0x9b
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
Warning: PCI Device 2 does not have an IRQ entry, skipping it
POST: 0x75
POST: 0x75
POST: 0x76
POST: 0x77
find_current_mrc_cache_local: No valid fast boot cache found.
POST: 0x79
POST: 0x9c
POST: 0x9e
POST: 0x9d
POST: 0x7a
POST: 0x7b
POST: 0xf8
PROGRESS CODE: V03020003 I0
Loading PEIM at 0x0000080EC20 EntryPoint=0x0000080EE80 CbSupportPeim.efi
PROGRESS CODE: V03020002 I0
0. 0000000000000000 - 0000000000000FFF [10]
1. 0000000000001000 - 000000000009FFFF [01]
2. 00000000000A0000 - 00000000000FFFFF [02]
3. 0000000000100000 - 000000007ACBCFFF [01]
4. 000000007ACBD000 - 000000007ADFFFFF [10]
5. 000000007AE00000 - 000000007FFFFFFF [02]
6. 00000000E0000000 - 00000000EFFFFFFF [02]
7. 00000000FEB00000 - 00000000FEC00FFF [02]
8. 00000000FED01000 - 00000000FED01FFF [02]
9. 00000000FED03000 - 00000000FED03FFF [02]
10. 00000000FED05000 - 00000000FED05FFF [02]
11. 00000000FED08000 - 00000000FED08FFF [02]
12. 00000000FED0C000 - 00000000FED0FFFF [02]
13. 00000000FED1C000 - 00000000FED1CFFF [02]
14. 00000000FEE00000 - 00000000FEE00FFF [02]
15. 00000000FEF00000 - 00000000FEFFFFFF [02]
16. 00000000FF800000 - 00000000FFFFFFFF [02]
Low memory 0x7ACBD000, High Memory 0x0
LowMemorySize: 0x7ACBD000.
HighMemorySize: 0x0.
PeiMemBase: 0x76CB0000.
PeiMemSize: 0x4000000.
PeiInstallPeiMemory MemoryBegin 0x76CB0000, MemoryLength 0x4000000
Found one valid fv : 0x820000.
Install PPI: 49EDB1C1-BF21-4761-BB12-EB0031AABB39
Notify: PPI Guid: 49EDB1C1-BF21-4761-BB12-EB0031AABB39, Peim notify entry point: 801BC0
The 1th FV start address is 0x00000820000, size is 0x003E0000, handle is 0x820000
Install PPI: 7408D748-FC8C-4EE6-9288-C4BEC092A410
Actual Coreboot header: 0x7ACBD000.
Failed to find the required acpi table


PEI_ASSERT!: d:\myworkspace\CorebootModulePkg\CbSupportPei\CbSupportPei.c (338): ((BOOLEAN)(0==1))
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20150707/71543c86/attachment.html>


More information about the coreboot mailing list