[coreboot] Coreboot FILO payload build fails when USB support enabled

Vipin Gahlaut gailu96 at gmail.com
Sun Oct 12 20:19:30 CEST 2014


No. I am using qemu (version 2.1.2) with -usbdevice option. I run qemu with
following command

qemu-system-i386 -bios ./coreboot.rom -hda hda.img -usbdevice disk:usb.img
-nographic

On Sun, Oct 12, 2014 at 11:31 PM, Nico Huber <nico.h at gmx.de> wrote:

> On 12.10.2014 18:21, Vipin Gahlaut wrote:
> > Logs for the problem I am getting repeatedly at run time
> > change on port 1
> > fullspeed device
> > first get_descriptor(DT_DEV) failed
> > set_address failed
> That's exactly what I observed on a kontron/986lcd-m (i945) with low-
> speed devices connected to the UHCI. Are you using a similar platform?
>
> Nico
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20141012/2591c7ae/attachment.html>


More information about the coreboot mailing list