[coreboot] commit 6b330f2a bricked my x60; a296f9e3 was working.

[The Gluglug]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Based on advice from Alexander I did:
git revert 35382a6e

Made my X60 boot, where without the revert I had the same issue as
Andrew Engelbrecht <sudoman at ninthfloor.org> that the machine didn't
boot; not even serial output worked.

I pushed the revert commit to gerrit for others to look at:
http://review.coreboot.org/#/c/7041/

Thanks to Alexander for the bisect!

On 10/10/14 21:08, Alexander Couzens wrote:
> Hi Andrew,
> 
> on my x201t I got the same problems. I bisect it to cbmem console:
> Locate the preram console with a symbol instead of a section. 
> (commit 35382a6e, Change-Id: I3257b981e).
> 
> @Gabe: Do you tested the commit with SeaBios as payload?
> 
> @Andrew: You can also use a raspberry pi or a beaglebone black.
> They are a lot faster than a buspirate (30min -> 5min).
> 
> Best, Alex
> 
> cfg: 
> http://lynxis.crew.c-base.org/coreboot.config.762d53d41_without_cbmem
>
> 
> 
> 
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)

iQEcBAEBAgAGBQJUOEr5AAoJEP9Ft0z50c+U0MsH/jh1preGRFV5QXyeybJcxC+k
xhJAz+NoLdD57PAPP4y858Z4u+yV/ShWw+VlR+gQbf/1K8goCgV7w66eosWCg3OO
6OryX7Eq/gNuLe2Z8Ei0fhduYHUhipwZFRlHJ1AF2qKzqoAoIodcm3UAoj/MK6R6
e7UeHLmgQRe2YsUBD9eDHPxTkYleCoHt9gHGayWZE7tRnCWXglyDUkY96EFdToi8
CxsEr6FmE6sDIskgWAYeHfgpWq/u0TyYasaP+FkWKrAVt9E7U7SK00/PZtFizUqR
GKtFKnAB1faR8Y+3DgtXXq0+KmtQ392Kmp1goN3BaSB87IF2E4zY9jyQLIXdU6w=
=504N
-----END PGP SIGNATURE-----