[coreboot] sgabios no console output from Seabios (was: coreboot Digest, Vol 113, Issue 17)

[WANG FEI]

Wang Wen,

I found following message in the coreboot-seabios log,

[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.3.4-5.fc17.x86_64
root=UUID=c4d4a429-d880-4caa-831e-9e95b5595f67 ro rd.md=0 rd.lvm=0 rd.dm=0
SYSFONT=True KEYTABLE=us rd.luks=0 LANG=en_US.UTF-8 console=ttyS1,115200n8

It shows "console=ttyS1,115200n8", it means the Linux kernel is using ttyS1
as the primary serial console, which is I/O port 0x2f8. But the seabios
configure file shows seabios is configured using I/O port 0x3f8. it might
be the problem.

Please run "make menuconfig" in seabios and reconfigure the serial port to
0x2f8, let us know any difference.

-Wang Fei


On Mon, Jul 14, 2014 at 9:53 PM, Paul Menzel <
paulepanter at users.sourceforge.net> wrote:

> Dear Wen,
>
>
> Am Montag, den 14.07.2014, 11:32 -0400 schrieb Wen Wang:
>
> > Thanks for looking into to it!
> >
> > I pulled the seabios tree and built seabios manually (.config shown
> > below). I then loaded seabios/out/bios.bin.elf as coreboot payload and
> > sgabios as option rom. Unfortunately the same result, no output from
> > seabios at all.
>
> If you build and run the utility `cbmem` as shown below, what is the
> output of the last two commands?
>
>         $ cd util/cbmem
>         $ make
>         $ sudo cbmem -l
>         $ sudo cbmem -c
>
>
> Thanks,
>
> Paul
>
> --
> coreboot mailing list: coreboot at coreboot.org
> http://www.coreboot.org/mailman/listinfo/coreboot
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20140715/1821f4f0/attachment.html>