[coreboot] 答复: questions about Rangerley

[Martin Roth]

Hi Jack,
   Here's the direct link to the pdf:
http://www.intel.com/content/www/us/en/embedded/products/bay-trail/atom-e3800-crb-guide.html
     If you look at section 4.3, it describes the setup of the intel 
directory, and describes how to download and build coreboot.
Obviously things won't be exactly the same since you're trying to build 
mohon peak instead of Bayley Bay, but I believe this should help get you 
started.

Martin

On 12/05/2014 02:04 AM, Jack Zhao wrote:
> Thanks Martin.
> I do not have the experience on Baytrail platform with coreboot + fsp. Could
> you please share me link for file or introduction. That will be great.
> Thanks a lot for support.
>
> Best Regards,
> Jack Zhao
> +86-21-58966996-81122
>
> -----邮件原件-----
> 发件人: Martin Roth [mailto:gaumless at gmail.com]
> 发送时间: 2014年12月5日 12:01
> 收件人: Jack Zhao; coreboot at coreboot.org
> 主题: Re: [coreboot] questions about Rangerley
>
> Hi Jack,
>     The Rangeley processor is supported by coreboot.  The intel/mohonpeak is
> the reference board.
>
> You will need to download the FSP from http://intel.com/fsp
>
> While there isn't a platform guide for rangeley yet, you would follow
> similar steps to setting up coreboot for the baytrail platform, so grab that
> platform guide from the fsp site.  I believe it should answer most of your
> questions.
>
> Please note that the graphics card delivered with the mohon peak board is
> NOT compatible with SeaBIOS.  This is an issue with the video bios on that
> particular graphics card.
>
>
> Also, if this is for a commercial project, you may be interested in Sage's
> Rangeley BSP.
> http://www.se-eng.com/intel-processors-formerly-known-as-rangeleyavoton/
>
> Martin
>
> On 12/04/2014 01:07 AM, Jack Zhao wrote:
>> Hi Mr. Coreboot J
>>
>> I am a software engineer. And I am studying the coreboot with a new
>> project which will use the CPU Intel Rangerley. But from the supported
>> list, I cannot find it. Could you please tell me how I can see that?
>> Or you can share with me some link about it. Thanks very much for
>> support in advance.
>>
>> Best Regards,
>>
>> Jack Zhao
>>
>> +86-21-58966996-81122
>>
>>
>>
>