[coreboot] Baytrail SD card interface

[Julien Snell]

Hi Martin, Wen.

Sorry.. Reading my post I did not make it clear.
SD / USB Boot works well under a full UEFI Bios on Baytrail - I.

As Martin says it's not in Seabios yet for Baytrail - I.

But I am sure an updated patch will be coming very soon.

Regards
Julien Snell
Cocom
www.cc-e.co.uk
Tel :-    +44 (0) 1444 461620
Mob:-  +44 (0) 7834 548755
Skype  julien.cocom

           
Cocom design and manufacture internet connected devices (IoT) Introducing two new brands Mi-ProtoPCB, UK made lightning fast assembled PCB proto-types and Mi-Embedded, your very own customised embedded board.

-----Original Message-----
From: Martin Roth [mailto:martin.roth at se-eng.com] 
Sent: 07 August 2014 16:08
To: Wen Wang; Julien Snell; coreboot at coreboot.org
Subject: Re: [coreboot] Baytrail SD card interface

Wen,
     I'll push a patch for the muxing - I'd been meaning to do this and just got behind.

   I don't believe that SeaBIOS yet supports boot from SD (without a USB translator).  Sage pushed a preliminary patch supporting SD boot on specific platforms to the SeaBIOS mailing list a while back, but I don't believe that worked on Bay Trail, and I don't believe that any additional work has been done on the patches since then.

The thread starts here:
http://www.coreboot.org/pipermail/seabios/2014-June/008105.html

Here's a link to the patch:
http://www.seabios.org/pipermail/seabios/attachments/20140611/32c1a351/attachment-0001.gz

Hi Julien,
   Were those boards using Bay Trail and booting coreboot / SeaBIOS?  
I'm assuming you just meant that SD boot works in general.

Martin


On 08/07/2014 08:16 AM, Wen Wang wrote:
> Julien,
>
> Thanks much for the information!  We must have missed something.  For 
> SD card, we have SD enabled in fsp, and the GPIO mux configured in 
> coreboot. Is there anything else we need to do?  Did you have to do anything in seabios?
>
> Thanks,
>
> Wen
>
>
>
> -----Original Message-----
> From: Julien Snell [mailto:JulienSnell at cc-e.co.uk]
> Sent: Thursday, August 7, 2014 3:34 AM
> To: Wen Wang; coreboot at coreboot.org
> Subject: Re: [coreboot] Baytrail SD card interface
>
> Wen,
>
> SD Card , SD Card Boot work. We have designed several Boards with SD 
> Card Boot.
> Although I would recommend USB3 Boot as it's a magnitude faster.
>
> Regards
> Julien Snell
> Cocom
> www.cc-e.co.uk
>             
> Cocom design and manufacture internet connected devices (IoT) 
> Introducing two new brands Mi-ProtoPCB, UK made lightning fast 
> assembled PCB proto-types and Mi-Embedded, your very own customised embedded board.
>
> -----Original Message-----
> From: coreboot [mailto:coreboot-bounces at coreboot.org] On Behalf Of Wen 
> Wang
> Sent: 06 August 2014 20:45
> To: coreboot at coreboot.org
> Subject: [coreboot] Baytrail SD card interface
>
> Hello all,
>
> Does the current baytrail fsp coreboot code support SD/uSD card interface?
> Is anybody able to get it to work on Bayley Bay CRB? It does not seem 
> to work on our CRB. We checked the SD3_PWREN signal, it always remains 
> high and therefore the SD card doesn't get any power.
>
> Thanks,
>
> Wen
>
>
> --
> coreboot mailing list: coreboot at coreboot.org 
> http://www.coreboot.org/mailman/listinfo/coreboot
>
>
>
>