[coreboot] IMB-A180E H coreboot won't boot
wangsiyuanbuaa at gmail.com
Mon Apr 28 17:30:26 CEST 2014
Have you resolved this issue? Maybe you can uncomment
#define IDSOPT_TRACING_ENABLED TRUE
in src/mainboard/asrock/imb-a180/OptionsIds.h. Then you can get more
debug message in Agesa.
Try to debug into AmdInitMid()
in src/vendorcode/amd/agesa/f16kb/Proc/Common/AmdInitMid.c to see where the
On Sat, Feb 8, 2014 at 2:23 AM, Mark C. Mason <mark at edt.com> wrote:
> I'm new to coreboot, and I'm working to use it with an ASROCK IMB-A180,
> the H version with the LVDS port.
> I've read previous posts regarding the "IMB-A180 won't boot" on this group,
> and tried the .config that was posted, but the result is the same.
> The debugging output shows things progressing until
> is called, then the boot restarts, then stops cold at the same point:
> PCI: 00:18.4
> PCI: 00:18.5
> Done allocating resources.
> BS: BS_DEV_RESOURCES times (us): entry 0 run 1095130 exit 0
> POST: 0x74
> Enabling resources...
> Fam16 - domain_enable_resources: AmdInitMid.
> agesawrapper_amdinitmid ^@^@^@^@佚沈h褕<95><89>蝸捄4.0-5169-g9d1d740 Tue
> Feb 4 16:46:38 PST 2014 starting...
> Any help with this would be greatly appreciated. Full serial debug output
> then .config are attached below.
> Best regards,
> Mark Mason
> Engineering Design Team
> coreboot mailing list: coreboot at coreboot.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the coreboot