[coreboot] ASRock E350M1 start automatically after a electric cut
Paul Menzel
paulepanter at users.sourceforge.net
Tue Apr 15 08:42:36 CEST 2014
Dear HacKurx,
Am Montag, den 14.04.2014, 15:44 +0200 schrieb HacKurx:
> My E350M1 start automatically after a electric cut.
did your coreboot images always behave that way?
> I tested this in the hope but I get the same result:
> http://review.coreboot.org/#/c/5397/
that patch set should be unrelated to your issue.
> I do not have this problem with the manufacturer bios. Does watchdog
> is used by default? Do you have an idea or solution?
If you use a commit from master, please run
$ sh util/board_status/board_status.sh
or
$ bash util/board_status/board_status.sh
from the coreboot directory where you build your image.
The problem is probably that you have `USE_OPTION_TABLE` selected, where
the default is to restart on powerloss. You can configure the values in
NVRAM with nvramtool from `util/nvramtool`.
Thanks,
Paul
PS: If you reply, please do not top post and use interleaved style [1].
[1] http://en.opensuse.org/openSUSE:Mailing_list_netiquette
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: This is a digitally signed message part
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20140415/0a5c802b/attachment.asc>
More information about the coreboot
mailing list