[coreboot] Wyse S10 Geode GX2

Jamie Lodberg jamie at toasty.dk
Wed Apr 9 22:29:21 CEST 2014


On Apr 8, 2014, at 21:58 , Jamie Lodberg wrote:

> On 8. apr. 2014, at 13:40, jamie at toasty.dk wrote:
> 
>> 
>> I then tested again on another S50: Backed up the factory ROM image, flashed my coreboot.rom, then flashed again with the factory ROM image - that box is still working. When I find my PLCC puller, I will try to revive the bricked S50.
>> 
>> 
> 
> A quick status update here - I found my PLCC puller!
> 
> My Tiny Core Linux flashrom rig is definitely working - I revived the bricked S50 by flashing a factory image to it.
> 
> (Then I bricked it again hehe)

Success!

Haha silly me - I don't think they were bricked at all… as fijam wrote on his blog posting, the power button and LED don't work with coreboot. I had forgotten about this. I connected up a serial cable and saw that it was starting coreboot! Then I watched NanoBSD boot (with NO pcib hangs!!) and was able to ssh into it.

Only problem so far is FreeBSD complaining about an interrupt storm on IRQ 10 when I have the serial port connected. Hm.

Anyway, this is fantastic!!! :D

 -Jamie


More information about the coreboot mailing list