[coreboot] Asrock IMB-A180 not booting

[Prop 395]

On 11/25/2013 04:20 PM, Dave Frodin wrote:
> I wouldn't think it would be a bad board if the AMI bios works.
>
> When you enabled "Add a VGA BIOS image" and changed the default 
> graphics ID for your VBIOS did you change it from
> 1002,9830 to 1002,9834?
>
>
> On Mon, Nov 25, 2013 at 4:35 PM, Prop 395 <prop395 at gmail.com 
> <mailto:prop395 at gmail.com>> wrote:
>
>     I tried the .config file and adjusted the VBIOS for my dev system,
>     but I am still getting the same results (no video).  The sticker
>     on the motherboard near the power connector says IMB-A180E-H E.
>     Printed on the right edge of the motherboard near the heat sink it
>     says IMB-A180-H REV. G/A 1.02.
>
>     I also tried the stock AMI BIOS to confirm it still works (and it
>     did).
>
>     Do I just have a bad board?
>
>
>
>
>     -- 
>     coreboot mailing list: coreboot at coreboot.org
>     <mailto:coreboot at coreboot.org>
>     http://www.coreboot.org/mailman/listinfo/coreboot
>
>

I saw in your .config the device ID was already set to 9834 and cbfstool 
print confirms it.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20131125/bdaf8e40/attachment-0001.html>