[coreboot] New patch to review for coreboot: 391b390 lynxpoint: Add power management helper functions
Stefan Reinauer (stefan.reinauer@coreboot.org)
gerrit at coreboot.org
Tue Mar 19 01:59:31 CET 2013
Stefan Reinauer (stefan.reinauer at coreboot.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2813
-gerrit
commit 391b39079fb1830047f2da710c1e54a63095c25e
Author: Duncan Laurie <dlaurie at chromium.org>
Date: Fri Mar 8 16:01:44 2013 -0800
lynxpoint: Add power management helper functions
There are subtle yet significant differences in some of the
registers in the power management region between LynxPoint-H
and LynxPoint-LP.
In order to reduce code that is accessing these registers and
would need special cases this adds a number of helper functions
that can be used in both ramstage and SMM.
This commit just adds the new functions, subsequent commits will
start to use them.
Change-Id: I411da75da519f5b3198a408078cbf3114e426992
Signed-off-by: Duncan Laurie <dlaurie at chromium.org>
---
src/southbridge/intel/lynxpoint/Makefile.inc | 3 +-
src/southbridge/intel/lynxpoint/pch.h | 40 ++
src/southbridge/intel/lynxpoint/pmutil.c | 561 +++++++++++++++++++++++++++
3 files changed, 603 insertions(+), 1 deletion(-)
diff --git a/src/southbridge/intel/lynxpoint/Makefile.inc b/src/southbridge/intel/lynxpoint/Makefile.inc
index 3710135..04fa2f8 100644
--- a/src/southbridge/intel/lynxpoint/Makefile.inc
+++ b/src/southbridge/intel/lynxpoint/Makefile.inc
@@ -44,8 +44,9 @@ ramstage-$(CONFIG_ELOG) += elog.c
ramstage-y += spi.c
smm-$(CONFIG_SPI_FLASH_SMM) += spi.c
-ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smi.c
+ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smi.c pmutil.c
smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c me_9.x.c finalize.c pch.c
+smm-$(CONFIG_HAVE_SMI_HANDLER) += pmutil.c
romstage-y += early_usb.c early_smbus.c early_me.c me_status.c early_pch.c
romstage-$(CONFIG_USBDEBUG) += usb_debug.c
diff --git a/src/southbridge/intel/lynxpoint/pch.h b/src/southbridge/intel/lynxpoint/pch.h
index db9bb77..0f20a83 100644
--- a/src/southbridge/intel/lynxpoint/pch.h
+++ b/src/southbridge/intel/lynxpoint/pch.h
@@ -132,6 +132,32 @@ int pch_silicon_type(void);
int pch_is_lp(void);
u16 get_pmbase(void);
u16 get_gpiobase(void);
+
+/* Power Management register handling in pmutil.c */
+/* PM1_CNT */
+void enable_pm1_control(u32 mask);
+void disable_pm1_control(u32 mask);
+/* PM1 */
+u16 clear_pm1_status(void);
+void enable_pm1(u32 mask);
+u32 clear_smi_status(void);
+/* SMI */
+void enable_smi(u32 mask);
+void disable_smi(u32 mask);
+/* ALT_GP_SMI */
+u32 clear_alt_smi_status(void);
+void enable_alt_smi(u32 mask);
+/* TCO */
+u32 clear_tco_status(void);
+void enable_tco_sci(void);
+/* GPE0 */
+u32 clear_gpe_status(void);
+void clear_gpe_enable(void);
+void enable_all_gpe(u32 set1, u32 set2, u32 set3, u32 set4);
+void disable_all_gpe(void);
+void enable_gpe(u32 mask);
+void disable_gpe(u32 mask);
+
#if !defined(__PRE_RAM__) && !defined(__SMM__)
#include <device/device.h>
#include <arch/acpi.h>
@@ -590,10 +616,12 @@ unsigned get_gpios(const int *gpio_num_array);
#define TCOSCI_STS (1 << 6)
#define SWGPE_STS (1 << 2)
#define HOT_PLUG_STS (1 << 1)
+#define GPE0_STS_2 0x24
#define GPE0_EN 0x28
#define PME_B0_EN (1 << 13)
#define PME_EN (1 << 11)
#define TCOSCI_EN (1 << 6)
+#define GPE0_EN_2 0x2c
#define SMI_EN 0x30
#define INTEL_USB2_EN (1 << 18) // Intel-Specific USB2 SMI logic
#define LEGACY_USB2_EN (1 << 17) // Legacy USB2 SMI logic
@@ -618,6 +646,18 @@ unsigned get_gpios(const int *gpio_num_array);
#define TCO1_STS 0x64
#define DMISCI_STS (1 << 9)
#define TCO2_STS 0x66
+#define ALT_GP_SMI_EN2 0x5c
+#define ALT_GP_SMI_STS2 0x5e
+
+/* Lynxpoint LP */
+#define LP_GPE0_STS_1 0x80 /* GPIO 0-31 */
+#define LP_GPE0_STS_2 0x84 /* GPIO 32-63 */
+#define LP_GPE0_STS_3 0x88 /* GPIO 64-94 */
+#define LP_GPE0_STS_4 0x8c /* Standard GPE */
+#define LP_GPE0_EN_1 0x90
+#define LP_GPE0_EN_2 0x94
+#define LP_GPE0_EN_3 0x98
+#define LP_GPE0_EN_4 0x9c
/*
* SPI Opcode Menu setup for SPIBAR lockdown
diff --git a/src/southbridge/intel/lynxpoint/pmutil.c b/src/southbridge/intel/lynxpoint/pmutil.c
new file mode 100644
index 0000000..64fc585
--- /dev/null
+++ b/src/southbridge/intel/lynxpoint/pmutil.c
@@ -0,0 +1,561 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/*
+ * Helper functions for dealing with power management registers
+ * and the differences between LynxPoint-H and LynxPoint-LP.
+ */
+
+#include <arch/io.h>
+#ifdef __SMM__
+#include <arch/romcc_io.h>
+#include <device/pci_def.h>
+#else /* !__SMM__ */
+#include <device/device.h>
+#include <device/pci.h>
+#endif
+
+#include <console/console.h>
+#include "pch.h"
+
+#if CONFIG_INTEL_LYNXPOINT_LP
+#include "lp_gpio.h"
+#endif
+
+/* Print status bits with descriptive names */
+static void print_status_bits(u32 status, const char *bit_names[])
+{
+ int i;
+
+ if (!status)
+ return;
+
+ for (i=31; i>=0; i--) {
+ if (status & (1 << i)) {
+ if (bit_names[i])
+ printk(BIOS_DEBUG, "%s ", bit_names[i]);
+ else
+ printk(BIOS_DEBUG, "BIT%d ", i);
+ }
+ }
+}
+
+/* Print status bits as GPIO numbers */
+static void print_gpio_status(u32 status, int start)
+{
+ int i;
+
+ if (!status)
+ return;
+
+ for (i=31; i>=0; i--) {
+ if (status & (1 << i))
+ printk(BIOS_DEBUG, "GPIO%d ", start + i);
+ }
+}
+
+
+/*
+ * PM1_CNT
+ */
+
+/* Enable events in PM1 control register */
+void enable_pm1_control(u32 mask)
+{
+ u32 pm1_cnt = inl(get_pmbase() + PM1_CNT);
+ pm1_cnt |= mask;
+ outl(pm1_cnt, get_pmbase() + PM1_CNT);
+}
+
+/* Disable events in PM1 control register */
+void disable_pm1_control(u32 mask)
+{
+ u32 pm1_cnt = inl(get_pmbase() + PM1_CNT);
+ pm1_cnt &= ~mask;
+ outl(pm1_cnt, get_pmbase() + PM1_CNT);
+}
+
+
+/*
+ * PM1
+ */
+
+/* Clear and return PM1 status register */
+static u16 reset_pm1_status(void)
+{
+ u16 pm1_sts = inw(get_pmbase() + PM1_STS);
+ outw(pm1_sts, get_pmbase() + PM1_STS);
+ return pm1_sts;
+}
+
+/* Print PM1 status bits */
+static u16 print_pm1_status(u16 pm1_sts)
+{
+ const char *pm1_sts_bits[] = {
+ [0] = "TMROF",
+ [4] = "BM",
+ [5] = "GBL",
+ [8] = "PWRBTN",
+ [10] = "RTC",
+ [11] = "PRBTNOR",
+ [14] = "PCIEXPWAK",
+ [15] = "WAK",
+ };
+
+ if (!pm1_sts)
+ return 0;
+
+ printk(BIOS_SPEW, "PM1_STS: ");
+ print_status_bits(pm1_sts, pm1_sts_bits);
+ printk(BIOS_SPEW, "\n");
+
+ return pm1_sts;
+}
+
+/* Print, clear, and return PM1 status */
+u16 clear_pm1_status(void)
+{
+ return print_pm1_status(reset_pm1_status());
+}
+
+/* Enable PM1 event */
+void enable_pm1(u32 mask)
+{
+ u32 pm1_en = inl(get_pmbase() + PM1_EN);
+ pm1_en |= mask;
+ outl(pm1_en, get_pmbase() + PM1_EN);
+}
+
+
+/*
+ * SMI
+ */
+
+/* Clear and return SMI status register */
+static u32 reset_smi_status(void)
+{
+ u32 smi_sts = inl(get_pmbase() + SMI_STS);
+ outl(smi_sts, get_pmbase() + SMI_STS);
+ return smi_sts;
+}
+
+/* Print SMI status bits */
+static u32 print_smi_status(u32 smi_sts)
+{
+ const char *smi_sts_bits[] = {
+ [2] = "BIOS",
+ [3] = "LEGACY_USB",
+ [4] = "SLP_SMI",
+ [5] = "APM",
+ [6] = "SWSMI_TMR",
+ [8] = "PM1",
+ [9] = "GPE0",
+ [10] = "GPI",
+ [11] = "MCSMI",
+ [12] = "DEVMON",
+ [13] = "TCO",
+ [14] = "PERIODIC",
+ [15] = "SERIRQ_SMI",
+ [16] = "SMBUS_SMI",
+ [17] = "LEGACY_USB2",
+ [18] = "INTEL_USB2",
+ [20] = "PCI_EXP_SMI",
+ [21] = "MONITOR",
+ [26] = "SPI",
+ [27] = "GPIO_UNLOCK"
+ };
+
+ if (!smi_sts)
+ return 0;
+
+ printk(BIOS_DEBUG, "SMI_STS: ");
+ print_status_bits(smi_sts, smi_sts_bits);
+ printk(BIOS_DEBUG, "\n");
+
+ return smi_sts;
+}
+
+/* Print, clear, and return SMI status */
+u32 clear_smi_status(void)
+{
+ return print_smi_status(reset_smi_status());
+}
+
+/* Enable SMI event */
+void enable_smi(u32 mask)
+{
+ u32 smi_en = inl(get_pmbase() + SMI_EN);
+ smi_en |= mask;
+ outl(smi_en, get_pmbase() + SMI_EN);
+}
+
+/* Disable SMI event */
+void disable_smi(u32 mask)
+{
+ u32 smi_en = inl(get_pmbase() + SMI_EN);
+ smi_en &= ~mask;
+ outl(smi_en, get_pmbase() + SMI_EN);
+}
+
+
+/*
+ * ALT_GP_SMI
+ */
+
+/* Clear GPIO SMI status and return events that are enabled and active */
+static u32 reset_alt_smi_status(void)
+{
+ u32 alt_sts, alt_en;
+
+ if (pch_is_lp()) {
+ /* LynxPoint-LP moves this to GPIO region as dword */
+ alt_sts = inl(get_gpiobase() + GPIO_ALT_GPI_SMI_STS);
+ outl(alt_sts, get_gpiobase() + GPIO_ALT_GPI_SMI_STS);
+
+ alt_en = inl(get_gpiobase() + GPIO_ALT_GPI_SMI_EN);
+ } else {
+ u16 pmbase = get_pmbase();
+
+ /* LynxPoint-H adds a second enable/status word */
+ alt_sts = inw(pmbase + ALT_GP_SMI_STS2);
+ outw(alt_sts & 0xffff, pmbase + ALT_GP_SMI_STS2);
+
+ alt_sts <<= 16;
+ alt_sts |= inw(pmbase + ALT_GP_SMI_STS);
+ outw(alt_sts & 0xffff, pmbase + ALT_GP_SMI_STS);
+
+ alt_en = inw(pmbase + ALT_GP_SMI_EN2);
+ alt_en <<= 16;
+ alt_en |= inw(pmbase + ALT_GP_SMI_EN);
+ }
+
+ /* Only report enabled events */
+ return alt_sts & alt_en;
+}
+
+/* Print GPIO SMI status bits */
+static u32 print_alt_smi_status(u32 alt_sts)
+{
+ if (!alt_sts)
+ return 0;
+
+ printk(BIOS_DEBUG, "ALT_STS: ");
+
+ if (pch_is_lp()) {
+ /* First 16 events are GPIO 32-47 */
+ print_gpio_status(alt_sts & 0xffff, 32);
+ } else {
+ const char *alt_sts_bits_high[] = {
+ [0] = "GPIO17",
+ [1] = "GPIO19",
+ [2] = "GPIO21",
+ [3] = "GPIO22",
+ [4] = "GPIO43",
+ [5] = "GPIO56",
+ [6] = "GPIO57",
+ [7] = "GPIO60",
+ };
+
+ /* First 16 events are GPIO 0-15 */
+ print_gpio_status(alt_sts & 0xffff, 0);
+ print_status_bits(alt_sts >> 16, alt_sts_bits_high);
+ }
+
+ printk(BIOS_DEBUG, "\n");
+
+ return alt_sts;
+}
+
+/* Print, clear, and return GPIO SMI status */
+u32 clear_alt_smi_status(void)
+{
+ return print_alt_smi_status(reset_alt_smi_status());
+}
+
+/* Enable GPIO SMI events */
+void enable_alt_smi(u32 mask)
+{
+ if (pch_is_lp()) {
+ u32 alt_en;
+
+ alt_en = inl(get_gpiobase() + GPIO_ALT_GPI_SMI_EN);
+ alt_en |= mask;
+ outl(alt_en, get_gpiobase() + GPIO_ALT_GPI_SMI_EN);
+ } else {
+ u16 pmbase = get_pmbase();
+ u16 alt_en;
+
+ /* Lower enable register */
+ alt_en = inw(pmbase + ALT_GP_SMI_EN);
+ alt_en |= mask & 0xffff;
+ outw(alt_en, pmbase + ALT_GP_SMI_EN);
+
+ /* Upper enable register */
+ alt_en = inw(pmbase + ALT_GP_SMI_EN2);
+ alt_en |= (mask >> 16) & 0xffff;
+ outw(alt_en, pmbase + ALT_GP_SMI_EN2);
+ }
+}
+
+
+/*
+ * TCO
+ */
+
+/* Clear TCO status and return events that are enabled and active */
+static u32 reset_tco_status(void)
+{
+ u32 tcobase = get_pmbase() + 0x60;
+ u32 tco_sts = inl(tcobase + 0x04);
+ u32 tco_en = inl(get_pmbase() + 0x68);
+
+ /* Don't clear BOOT_STS before SECOND_TO_STS */
+ outl(tco_sts & ~(1 << 18), tcobase + 0x04);
+
+ /* Clear BOOT_STS */
+ if (tco_sts & (1 << 18))
+ outl(tco_sts & (1 << 18), tcobase + 0x04);
+
+ return tco_sts & tco_en;
+}
+
+/* Print TCO status bits */
+static u32 print_tco_status(u32 tco_sts)
+{
+ const char *tco_sts_bits[] = {
+ [0] = "NMI2SMI",
+ [1] = "SW_TCO",
+ [2] = "TCO_INT",
+ [3] = "TIMEOUT",
+ [7] = "NEWCENTURY",
+ [8] = "BIOSWR",
+ [9] = "DMISCI",
+ [10] = "DMISMI",
+ [12] = "DMISERR",
+ [13] = "SLVSEL",
+ [16] = "INTRD_DET",
+ [17] = "SECOND_TO",
+ [18] = "BOOT",
+ [20] = "SMLINK_SLV"
+ };
+
+ if (!tco_sts)
+ return 0;
+
+ printk(BIOS_DEBUG, "TCO_STS: ");
+ print_status_bits(tco_sts, tco_sts_bits);
+ printk(BIOS_DEBUG, "\n");
+
+ return tco_sts;
+}
+
+/* Print, clear, and return TCO status */
+u32 clear_tco_status(void)
+{
+ return print_tco_status(reset_tco_status());
+}
+
+/* Enable TCO SCI */
+void enable_tco_sci(void)
+{
+ u16 gpe0_sts = pch_is_lp() ? LP_GPE0_STS_4 : GPE0_STS;
+
+ /* Clear pending events */
+ outl(get_pmbase() + gpe0_sts, TCOSCI_STS);
+
+ /* Enable TCO SCI events */
+ enable_gpe(TCOSCI_EN);
+}
+
+
+/*
+ * GPE0
+ */
+
+/* Clear a GPE0 status and return events that are enabled and active */
+static u32 reset_gpe_status(u16 sts_reg, u16 en_reg)
+{
+ u32 gpe0_sts = inl(get_pmbase() + sts_reg);
+ u32 gpe0_en = inl(get_pmbase() + en_reg);
+
+ outl(gpe0_sts, get_pmbase() + sts_reg);
+
+ /* Only report enabled events */
+ return gpe0_sts & gpe0_en;
+}
+
+/* Print GPE0 status bits */
+static u32 print_gpe_status(u32 gpe0_sts, const char *bit_names[])
+{
+ if (!gpe0_sts)
+ return 0;
+
+ printk(BIOS_DEBUG, "GPE0_STS: ");
+ print_status_bits(gpe0_sts, bit_names);
+ printk(BIOS_DEBUG, "\n");
+
+ return gpe0_sts;
+}
+
+/* Print GPE0 GPIO status bits */
+static u32 print_gpe_gpio(u32 gpe0_sts, int start)
+{
+ if (!gpe0_sts)
+ return 0;
+
+ printk(BIOS_DEBUG, "GPE0_STS: ");
+ print_gpio_status(gpe0_sts, start);
+ printk(BIOS_DEBUG, "\n");
+
+ return gpe0_sts;
+}
+
+/* Print, clear, and return LynxPoint-H GPE0 status */
+static u32 clear_lpt_gpe_status(void)
+{
+ const char *gpe0_sts_bits_low[] = {
+ [1] = "HOTPLUG",
+ [2] = "SWGPE",
+ [6] = "TCO_SCI",
+ [7] = "SMB_WAK",
+ [8] = "RI",
+ [9] = "PCI_EXP",
+ [10] = "BATLOW",
+ [11] = "PME",
+ [13] = "PME_B0",
+ [16] = "GPIO0",
+ [17] = "GPIO1",
+ [18] = "GPIO2",
+ [19] = "GPIO3",
+ [20] = "GPIO4",
+ [21] = "GPIO5",
+ [22] = "GPIO6",
+ [23] = "GPIO7",
+ [24] = "GPIO8",
+ [25] = "GPIO9",
+ [26] = "GPIO10",
+ [27] = "GPIO11",
+ [28] = "GPIO12",
+ [29] = "GPIO13",
+ [30] = "GPIO14",
+ [31] = "GPIO15",
+ };
+ const char *gpe0_sts_bits_high[] = {
+ [3] = "GPIO27",
+ [6] = "WADT",
+ [24] = "GPIO17",
+ [25] = "GPIO19",
+ [26] = "GPIO21",
+ [27] = "GPIO22",
+ [28] = "GPIO43",
+ [29] = "GPIO56",
+ [30] = "GPIO57",
+ [31] = "GPIO60",
+ };
+
+ /* High bits */
+ print_gpe_status(reset_gpe_status(GPE0_STS_2, GPE0_EN_2),
+ gpe0_sts_bits_high);
+
+ /* Standard GPE and GPIO 0-31 */
+ return print_gpe_status(reset_gpe_status(GPE0_STS, GPE0_EN),
+ gpe0_sts_bits_low);
+}
+
+/* Print, clear, and return LynxPoint-LP GPE0 status */
+static u32 clear_lpt_lp_gpe_status(void)
+{
+ const char *gpe0_sts_4_bits[] = {
+ [1] = "HOTPLUG",
+ [2] = "SWGPE",
+ [6] = "TCO_SCI",
+ [7] = "SMB_WAK",
+ [9] = "PCI_EXP",
+ [10] = "BATLOW",
+ [11] = "PME",
+ [12] = "ME",
+ [13] = "PME_B0",
+ [16] = "GPIO27",
+ [18] = "WADT"
+ };
+
+ /* GPIO 0-31 */
+ print_gpe_gpio(reset_gpe_status(LP_GPE0_STS_1, LP_GPE0_EN_1), 0);
+
+ /* GPIO 32-63 */
+ print_gpe_gpio(reset_gpe_status(LP_GPE0_STS_2, LP_GPE0_EN_2), 32);
+
+ /* GPIO 64-94 */
+ print_gpe_gpio(reset_gpe_status(LP_GPE0_STS_3, LP_GPE0_EN_3), 64);
+
+ /* Standard GPE */
+ return print_gpe_status(reset_gpe_status(LP_GPE0_STS_4, LP_GPE0_EN_4),
+ gpe0_sts_4_bits);
+}
+
+/* Clear all GPE status and return "standard" GPE event status */
+u32 clear_gpe_status(void)
+{
+ if (pch_is_lp())
+ return clear_lpt_lp_gpe_status();
+ else
+ return clear_lpt_gpe_status();
+}
+
+/* Enable all requested GPE */
+void enable_all_gpe(u32 set1, u32 set2, u32 set3, u32 set4)
+{
+ u16 pmbase = get_pmbase();
+
+ if (pch_is_lp()) {
+ outl(set1, pmbase + LP_GPE0_EN_1);
+ outl(set2, pmbase + LP_GPE0_EN_2);
+ outl(set3, pmbase + LP_GPE0_EN_3);
+ outl(set4, pmbase + LP_GPE0_EN_4);
+ } else {
+ outl(set1, pmbase + GPE0_EN);
+ outl(set2, pmbase + GPE0_EN_2);
+ }
+}
+
+/* Disable all GPE */
+void disable_all_gpe(void)
+{
+ enable_all_gpe(0, 0, 0, 0);
+}
+
+/* Enable a standard GPE */
+void enable_gpe(u32 mask)
+{
+ u32 gpe0_reg = pch_is_lp() ? LP_GPE0_EN_4 : GPE0_EN;
+ u32 gpe0_en = inl(get_pmbase() + gpe0_reg);
+ gpe0_en |= mask;
+ outl(gpe0_en, get_pmbase() + gpe0_reg);
+}
+
+/* Disable a standard GPE */
+void disable_gpe(u32 mask)
+{
+ u32 gpe0_reg = pch_is_lp() ? LP_GPE0_EN_4 : GPE0_EN;
+ u32 gpe0_en = inl(get_pmbase() + gpe0_reg);
+ gpe0_en &= ~mask;
+ outl(gpe0_en, get_pmbase() + gpe0_reg);
+}
More information about the coreboot
mailing list