[coreboot] Patch set updated for coreboot: 969e55b Persimmon DSDT: Add secondary bus range to PCI0

Mike Loptien (mike.loptien@se-eng.com) gerrit at coreboot.org
Wed Mar 6 23:42:20 CET 2013


Mike Loptien (mike.loptien at se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2592

-gerrit

commit 969e55b868fd2fcb5e02cde02447a894f158245b
Author: Mike Loptien <mike.loptien at se-eng.com>
Date:   Tue Mar 5 14:21:28 2013 -0700

    Persimmon DSDT: Add secondary bus range to PCI0
    
    Adding the 'WordBusNumber' macro to the PCI0
    CRES ResourceTemplate in the Persimmon DSDT.
    This sets up the bus number for the PCI0 device
    and the secondary bus number for the CRS method.
    This change came in response to a 'dmesg' error
    which states:
    '[FIRMWARE BUG]: ACPI: no secondary bus range in _CRS'
    
    By adding the 'WordBusNumber' macro, ACPI can set
    up a valid range for the PCIe downstream busses,
    thereby relieving the Linux kernel from "guessing"
    the valid range based off _BBN or assuming [0-0xFF].
    The Linux kernel code that checks this bus range is
    in `drivers/acpi/pci_root.c`.
    
    This change will apply to other AMD mainboards and
    will be in a different commit.
    
    Change-Id: I44f22bc03a0dcbcd2594d4291508826cc2146860
    Signed-off-by: Mike Loptien <mike.loptien at se-eng.com>
---
 src/mainboard/amd/persimmon/dsdt.asl | 31 ++++++++++++++++++++++++++-----
 1 file changed, 26 insertions(+), 5 deletions(-)

diff --git a/src/mainboard/amd/persimmon/dsdt.asl b/src/mainboard/amd/persimmon/dsdt.asl
index 582ab7f..06e407d 100644
--- a/src/mainboard/amd/persimmon/dsdt.asl
+++ b/src/mainboard/amd/persimmon/dsdt.asl
@@ -1157,6 +1157,8 @@ DefinitionBlock (
 		Device(PCI0) {
 			External (TOM1)
 			External (TOM2)
+			Name (PSBB, 0x0000)	/* Secondary bus base variable for PCI0 */
+			Name (PSBL, 0x00FF)	/* Secondary bus length variable for PCI0 */
 			Name(_HID, EISAID("PNP0A03"))
 			Name(_ADR, 0x00180000)	/* Dev# = BSP Dev#, Func# = 0 */
 			Method(_BBN, 0) { /* Bus number = 0 */
@@ -1477,14 +1479,23 @@ DefinitionBlock (
 			} /* end Ac97modem */
 
 			Name(CRES, ResourceTemplate() {
+				/* This sets the Bus number and Secondary Bus number for the PCI0 device */
+				WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
+					0x0000,		/* address granularity */
+					0x0000,		/* range minimum */
+					0x007F,		/* range maximum */
+					0x0000,		/* translation */
+					0x0080,		/* length */
+					,, PSB0)	/* ResourceSourceIndex, ResourceSource, DescriptorName */
+
 				IO(Decode16, 0x0CF8, 0x0CF8, 1,	8)
 
 				WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
-					0x0000,			/* address granularity */
-					0x0000,			/* range minimum */
-					0x0CF7,			/* range maximum */
-					0x0000,			/* translation */
-					0x0CF8			/* length */
+					0x0000,         /* address granularity */
+					0x0000,         /* range minimum */
+					0x0CF7,         /* range maximum */
+					0x0000,         /* translation */
+					0x0CF8          /* length */
 				)
 
 				WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
@@ -1581,6 +1592,16 @@ DefinitionBlock (
 					Store(PBLN,EBML)
 				}
 #endif
+				/* This sets up the secondary bus range for PCI0. */
+				CreateWordField (CRES, ^PSB0._MIN, MIN0)
+				CreateWordField (CRES, ^PSB0._MAX, MAX0)
+				CreateWordField (CRES, ^PSB0._LEN, LEN0)
+
+				Store (PSBB, MIN0)	/* Put Secondary Bus Base value into MIN0 memory */
+				Store (PSBL, LEN0)	/* Put Secondary Bus Length value into LEN0 memory */
+				Store (LEN0, Local0)	/* Copy into Local0 for doing math */
+				Add (MIN0, Decrement (Local0), MAX0)	/* Add MIN0 to Local0 and put it into MAX0 memory */
+
 				CreateDWordField(CRES, ^MMIO._BAS, MM1B)
                                 CreateDWordField(CRES, ^MMIO._LEN, MM1L)
                                 /*



More information about the coreboot mailing list