[coreboot] git clone coreboot : Error: RPC failed; result=22, HTTP code = 502

Pradish M P, ERS, HCLTech pradishmp at hcl.com
Fri Apr 19 10:27:55 CEST 2013

Dear Ron/Coreboot folks

I have run the command under strace -f , and I have attached the log 
Let me know if any of you have any suggestions.


-----Original Message-----
From: ron minnich [mailto:rminnich at gmail.com] 
Sent: Thursday, April 18, 2013 8:38 PM
To: Pradish M P, ERS, HCLTech
Cc: coreboot at coreboot.org
Subject: Re: [coreboot] git clone coreboot : Error: RPC failed; result=22, HTTP code = 502

run that command under strace -f please and make the output available somewhere



The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted,
lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents
(with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates.
Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the
views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification,
distribution and / or publication of this message without the prior written consent of authorized representative of
HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately.
Before opening any email and/or attachments, please check them for viruses and other defects.

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Coreboot_git_clone_Error_RPC_failed_result_22_HTTP_code_ 502.txt
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20130419/1d7b7e10/attachment-0001.txt>

More information about the coreboot mailing list