[coreboot] No parallel port set up on Alix 1D board

[Joao Bonina]

Thank you.

I'm analysing the source code for the Winbond W83627HF chip, to see if I can do something about it.

Best regards,
Joao Bonina



________________________________
 From: QingPei Wang <wangqingpei at gmail.com>
To: Joao Bonina <bonina_2001 at yahoo.com> 
Cc: Marc Jones <marcj303 at gmail.com>; "paulepanter at users.sourceforge.net" <paulepanter at users.sourceforge.net>; "coreboot at coreboot.org" <coreboot at coreboot.org> 
Sent: Wednesday, 30 May 2012, 5:34
Subject: Re: [coreboot] No parallel port set up on Alix 1D board
 

you can check your SIO code under coreboot/src/superio/(chip brand)/chip/* .
it seems the parallel port are not configured correctly. 



Best wishes
QingPei Wang
Phone: 86+018930528086



On Wed, May 30, 2012 at 3:04 AM, Joao Bonina <bonina_2001 at yahoo.com> wrote:

Hello Marc,
>
>
>can you give me some pointers on that? Is there a tutorial or information resource for that?
>
>
>
>Where could I check the SIO code for that?
>
>
>Thanks,
>Joao
>
>
>
>________________________________
> From: Marc Jones <marcj303 at gmail.com>
>To: Joao Bonina <bonina_2001 at yahoo.com> 
>Cc: "paulepanter at users.sourceforge.net" <paulepanter at users.sourceforge.net>; "coreboot at coreboot.org" <coreboot at coreboot.org> 
>Sent: Tuesday, 29 May 2012, 19:58
>
>Subject: Re: [coreboot] No parallel port set up on Alix 1D board
> 
>
>On Sun, May 27, 2012 at 5:30 PM, Joao Bonina <bonina_2001 at yahoo.com> wrote:
>>
>>
>> Hello Paul,
>>
>>
>> sorry about that.
>>
>> I'm attaching the serial console debug, as well as the dmesg output.
>>
>> I'm using coreboot v4.0-2408-gad422c0
>>
>> SeaBIOS is version -20120527_232947-debian (as outputted by SeaBIOS build).
>>
>> Distribution is Debian Squeeze, and kernel version is
 2.6.38-bpo.2-486.
>>
>> Thanks in advance!
>>
>>
>>
>>
>> ----- Original Message -----
>> From: Paul Menzel <paulepanter at users.sourceforge.net>
>> To: Joao Bonina <bonina_2001 at yahoo.com>
>> Cc: coreboot at coreboot.org
>> Sent: Sunday, 27 May 2012, 13:34
>> Subject: Re: [coreboot] No parallel port set up on Alix 1D board
>>
>> Dear Joao,
>>
>>
>> at first, could you in the future please just send plain text messages
>> to the list [1][2]? That would be awesome.
>>
>> Am Sonntag, den 27.05.2012, 04:55 -0700 schrieb Joao Bonina:
>>
>>> I just started using coreboot with
 SeaBIOS as payload on an Alix 1D
>>> board and began testing functionality.
>>>
>>> I noticed that the parallel port isn't working (the /dev/parport0
>>> isn't created), and parallel port support is selected in coreboot's
>>> config.
>>>
>>> Anyone have any clues or hints?
>>
>> Unfortunately you do not provide enough information for developers to
>> help you. Please tell them the coreboot version, the SeaBIOS version,
>> the distribution and so and on.
>>
>> Also please attach coreboot’s debugging output and the Linux kernel
>> messages.
>>
>>
>> Thanks,
>>
>> Paul
>>
>>
>> [1] http://en.opensuse.org/openSUSE:Mailing_list_netiquette
>> [2] http://mailformat.dan.info/config/yahoo.html
>>
>> --
>> coreboot mailing list: coreboot at coreboot.org
>> http://www.coreboot.org/mailman/listinfo/coreboot
>> --
>> coreboot mailing list: coreboot at coreboot.org
>> http://www.coreboot.org/mailman/listinfo/coreboot
>
>The error is in your log:
>PNP: 002e.1 60 <- [0x0000000378 - 0x000000037f] size 0x00000008 gran 0x03 io
>PNP: 002e.1 70 <- [0x0000000007 - 0x0000000007] size 0x00000001 gran 0x00 irq
>ERROR: PNP: 002e.1 74 drq size: 0x0000000001 not assigned
>
>You'll need to see what is going on in the SIO code for
 that device.
>The setting is done in the mainboard devicetree.cb.
>
>Marc
>
>
>
>-- 
>http://se-eng.com
>
>
>
>--
>coreboot mailing list: coreboot at coreboot.org
>http://www.coreboot.org/mailman/listinfo/coreboot
>

-- 
coreboot mailing list: coreboot at coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20120530/1d7e11b8/attachment.html>