[coreboot] Patch set updated for coreboot: 20251a6 Use broadcast SIPI to startup siblings
Sven Schnelle (svens@stackframe.org)
gerrit at coreboot.org
Wed Jun 27 09:45:52 CEST 2012
Sven Schnelle (svens at stackframe.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1139
-gerrit
commit 20251a657ddab1a696fe4a7c3967b74cda45fb6e
Author: Sven Schnelle <svens at stackframe.org>
Date: Sun Jun 17 10:32:55 2012 +0200
Use broadcast SIPI to startup siblings
Change-Id: Ic48a1ebab6a7c52aa76765f497268af09fa38c25
Signed-off-by: Sven Schnelle <svens at stackframe.org>
---
src/arch/x86/Kconfig | 4 -
src/arch/x86/include/arch/cpu.h | 24 --
src/arch/x86/lib/cpu.c | 36 ++-
src/cpu/amd/model_10xxx/init_cpus.c | 3 +-
src/cpu/amd/model_fxx/init_cpus.c | 3 +-
src/cpu/intel/hyperthreading/Makefile.inc | 1 -
src/cpu/intel/hyperthreading/intel_sibling.c | 73 -----
src/cpu/intel/model_1067x/model_1067x_init.c | 4 -
src/cpu/intel/model_106cx/Kconfig | 1 -
src/cpu/intel/model_106cx/model_106cx_init.c | 4 -
src/cpu/intel/model_206ax/Kconfig | 1 -
src/cpu/intel/model_206ax/acpi.c | 9 +-
src/cpu/intel/model_206ax/model_206ax_init.c | 55 ----
src/cpu/intel/model_6ex/Kconfig | 1 -
src/cpu/intel/model_6ex/model_6ex_init.c | 3 -
src/cpu/intel/model_6fx/Kconfig | 1 -
src/cpu/intel/model_6fx/model_6fx_init.c | 3 -
src/cpu/intel/model_f2x/model_f2x_init.c | 4 -
src/cpu/intel/model_f3x/model_f3x_init.c | 4 -
src/cpu/intel/model_f4x/model_f4x_init.c | 4 -
src/cpu/intel/socket_LGA771/Kconfig | 1 -
src/cpu/x86/lapic/lapic_cpu_init.c | 367 +++++---------------------
src/cpu/x86/lapic/secondary.S | 19 +-
src/cpu/x86/pae/pgtbl.c | 12 +
src/drivers/i2c/w83795/w83795.c | 5 +-
src/include/cpu/cpu.h | 4 +-
src/include/cpu/x86/lapic.h | 15 -
src/include/device/path.h | 1 +
28 files changed, 134 insertions(+), 528 deletions(-)
diff --git a/src/arch/x86/Kconfig b/src/arch/x86/Kconfig
index 6d56ec6..4dfbe70 100644
--- a/src/arch/x86/Kconfig
+++ b/src/arch/x86/Kconfig
@@ -3,10 +3,6 @@ menu "Architecture (x86)"
# This is an SMP option. It relates to starting up APs.
# It is usually set in mainboard/*/Kconfig.
# TODO: Improve description.
-config AP_IN_SIPI_WAIT
- bool
- default n
- depends on ARCH_X86
# Aligns 16bit entry code in bootblock so that hyper-threading CPUs
# can boot AP CPUs to enable their shared caches.
diff --git a/src/arch/x86/include/arch/cpu.h b/src/arch/x86/include/arch/cpu.h
index 0dc92fb..0fe5ea5 100644
--- a/src/arch/x86/include/arch/cpu.h
+++ b/src/arch/x86/include/arch/cpu.h
@@ -158,30 +158,6 @@ struct cpu_driver {
struct device;
struct cpu_driver *find_cpu_driver(struct device *cpu);
-struct cpu_info {
- device_t cpu;
- unsigned long index;
-};
-
-static inline struct cpu_info *cpu_info(void)
-{
- struct cpu_info *ci;
- __asm__("andl %%esp,%0; "
- "orl %2, %0 "
- :"=r" (ci)
- : "0" (~(CONFIG_STACK_SIZE - 1)),
- "r" (CONFIG_STACK_SIZE - sizeof(struct cpu_info))
- );
- return ci;
-}
-
-static inline unsigned long cpu_index(void)
-{
- struct cpu_info *ci;
- ci = cpu_info();
- return ci->index;
-}
-
struct cpuinfo_x86 {
uint8_t x86; /* CPU family */
uint8_t x86_vendor; /* CPU vendor */
diff --git a/src/arch/x86/lib/cpu.c b/src/arch/x86/lib/cpu.c
index 98ede06..520b2c6 100644
--- a/src/arch/x86/lib/cpu.c
+++ b/src/arch/x86/lib/cpu.c
@@ -9,6 +9,7 @@
#include <device/path.h>
#include <device/device.h>
#include <smp/spinlock.h>
+#include <cpu/x86/lapic.h>
/* Standard macro to see if a specific flag is changeable */
static inline int flag_is_changeable_p(uint32_t flag)
@@ -234,7 +235,11 @@ static void set_cpu_ops(struct device *cpu)
cpu->ops = driver ? driver->ops : NULL;
}
-void cpu_initialize(void)
+#if CONFIG_SMP
+static spinlock_t start_cpu_lock = SPIN_LOCK_UNLOCKED;
+#endif
+
+void cpu_initialize(struct bus *cpu_bus)
{
/* Because we busy wait at the printk spinlock.
* It is important to keep the number of printed messages
@@ -242,17 +247,23 @@ void cpu_initialize(void)
* disabled.
*/
struct device *cpu;
- struct cpu_info *info;
struct cpuinfo_x86 c;
-
- info = cpu_info();
-
- printk(BIOS_INFO, "Initializing CPU #%ld\n", info->index);
-
- cpu = info->cpu;
- if (!cpu) {
- die("CPU: missing cpu device structure");
- }
+ struct device_path cpu_path;
+ static int cpu_index;
+ unsigned char id = lapicid();
+
+ cpu_path.type = DEVICE_PATH_APIC;
+ cpu_path.apic.apic_id = id;
+
+#if CONFIG_SMP
+ spin_lock(&start_cpu_lock);
+#endif
+ cpu_path.apic.index = cpu_index++;
+ cpu = alloc_find_dev(cpu_bus, &cpu_path);
+#if CONFIG_SMP
+ spin_unlock(&start_cpu_lock);
+#endif
+ printk(BIOS_DEBUG, "Initializing CPU #%d\n", id);
/* Find what type of cpu we are dealing with */
identify_cpu(cpu);
@@ -276,7 +287,6 @@ void cpu_initialize(void)
printk(BIOS_DEBUG, "Using generic cpu ops (good)\n");
}
-
/* Initialize the cpu */
if (cpu->ops && cpu->ops->init) {
cpu->enabled = 1;
@@ -284,7 +294,7 @@ void cpu_initialize(void)
cpu->ops->init(cpu);
}
- printk(BIOS_INFO, "CPU #%ld initialized\n", info->index);
+ printk(BIOS_INFO, "CPU #%d initialized\n", id);
return;
}
diff --git a/src/cpu/amd/model_10xxx/init_cpus.c b/src/cpu/amd/model_10xxx/init_cpus.c
index e2a4a64..0ffce53 100644
--- a/src/cpu/amd/model_10xxx/init_cpus.c
+++ b/src/cpu/amd/model_10xxx/init_cpus.c
@@ -241,7 +241,8 @@ static void STOP_CAR_AND_CPU(void)
disable_cache_as_ram(); // inline
/* stop all cores except node0/core0 the bsp .... */
- stop_this_cpu();
+ for(;;)
+ hlt();
}
#if CONFIG_RAMINIT_SYSINFO
diff --git a/src/cpu/amd/model_fxx/init_cpus.c b/src/cpu/amd/model_fxx/init_cpus.c
index 7121642..d5e5800 100644
--- a/src/cpu/amd/model_fxx/init_cpus.c
+++ b/src/cpu/amd/model_fxx/init_cpus.c
@@ -190,7 +190,8 @@ static void STOP_CAR_AND_CPU(void)
{
disable_cache_as_ram(); // inline
/* stop all cores except node0/core0 the bsp .... */
- stop_this_cpu();
+ for(;;)
+ hlt();
}
#if CONFIG_RAMINIT_SYSINFO
diff --git a/src/cpu/intel/hyperthreading/Makefile.inc b/src/cpu/intel/hyperthreading/Makefile.inc
deleted file mode 100644
index 8adbad9..0000000
--- a/src/cpu/intel/hyperthreading/Makefile.inc
+++ /dev/null
@@ -1 +0,0 @@
-ramstage-y += intel_sibling.c
diff --git a/src/cpu/intel/hyperthreading/intel_sibling.c b/src/cpu/intel/hyperthreading/intel_sibling.c
deleted file mode 100644
index 2d2e105..0000000
--- a/src/cpu/intel/hyperthreading/intel_sibling.c
+++ /dev/null
@@ -1,73 +0,0 @@
-#include <console/console.h>
-#include <cpu/cpu.h>
-#include <cpu/x86/lapic.h>
-#include <cpu/intel/hyperthreading.h>
-#include <device/device.h>
-#include <pc80/mc146818rtc.h>
-#include <smp/spinlock.h>
-#include <assert.h>
-
-#if !CONFIG_SERIAL_CPU_INIT
-#error Intel hyper-threading requires serialized cpu init
-#endif
-
-static int first_time = 1;
-static int disable_siblings = !CONFIG_LOGICAL_CPUS;
-
-void intel_sibling_init(device_t cpu)
-{
- unsigned i, siblings;
- struct cpuid_result result;
-
- /* On the bootstrap processor see if I want sibling cpus enabled */
- if (first_time) {
- first_time = 0;
- get_option(&disable_siblings, "hyper_threading");
- }
- result = cpuid(1);
- /* Is hyperthreading supported */
- if (!(result.edx & (1 << 28))) {
- return;
- }
- /* See how many sibling cpus we have */
- siblings = (result.ebx >> 16) & 0xff;
- if (siblings < 1) {
- siblings = 1;
- }
-
- printk(BIOS_DEBUG, "CPU: %u %d siblings\n",
- cpu->path.apic.apic_id,
- siblings);
-
- /* See if I am a sibling cpu */
- if (cpu->path.apic.apic_id & (siblings -1)) {
- if (disable_siblings) {
- cpu->enabled = 0;
- }
- return;
- }
-
- /* I am the primary cpu start up my siblings */
- for(i = 1; i < siblings; i++) {
- struct device_path cpu_path;
- device_t new;
- /* Build the cpu device path */
- cpu_path.type = DEVICE_PATH_APIC;
- cpu_path.apic.apic_id = cpu->path.apic.apic_id + i;
-
-
- /* Allocate new cpu device structure iff sibling CPU
- * was not in static device tree.
- */
- new = alloc_find_dev(cpu->bus, &cpu_path);
-
- if (!new) {
- continue;
- }
-
- printk(BIOS_DEBUG, "CPU: %u has sibling %u\n",
- cpu->path.apic.apic_id,
- new->path.apic.apic_id);
- }
-}
-
diff --git a/src/cpu/intel/model_1067x/model_1067x_init.c b/src/cpu/intel/model_1067x/model_1067x_init.c
index c6d716d9..ddd1381 100644
--- a/src/cpu/intel/model_1067x/model_1067x_init.c
+++ b/src/cpu/intel/model_1067x/model_1067x_init.c
@@ -29,7 +29,6 @@
#include <cpu/x86/lapic.h>
#include <cpu/intel/microcode.h>
#include <cpu/intel/speedstep.h>
-#include <cpu/intel/hyperthreading.h>
#include <cpu/x86/cache.h>
#include <cpu/x86/name.h>
@@ -221,9 +220,6 @@ static void model_1067x_init(device_t cpu)
/* PIC thermal sensor control */
configure_pic_thermal_sensors();
-
- /* Start up my cpu siblings */
- intel_sibling_init(cpu);
}
static struct device_operations cpu_dev_ops = {
diff --git a/src/cpu/intel/model_106cx/Kconfig b/src/cpu/intel/model_106cx/Kconfig
index 09449cb..fe44024 100644
--- a/src/cpu/intel/model_106cx/Kconfig
+++ b/src/cpu/intel/model_106cx/Kconfig
@@ -3,4 +3,3 @@ config CPU_INTEL_MODEL_106CX
select SMP
select SSE2
select UDELAY_LAPIC
- select AP_IN_SIPI_WAIT
diff --git a/src/cpu/intel/model_106cx/model_106cx_init.c b/src/cpu/intel/model_106cx/model_106cx_init.c
index 4bf2924..8d2ef3d 100644
--- a/src/cpu/intel/model_106cx/model_106cx_init.c
+++ b/src/cpu/intel/model_106cx/model_106cx_init.c
@@ -27,7 +27,6 @@
#include <cpu/x86/lapic.h>
#include <cpu/intel/microcode.h>
#include <cpu/intel/speedstep.h>
-#include <cpu/intel/hyperthreading.h>
#include <cpu/x86/cache.h>
#include <cpu/x86/name.h>
#include <usbdebug.h>
@@ -178,9 +177,6 @@ static void model_106cx_init(device_t cpu)
configure_misc();
/* TODO: PIC thermal sensor control */
-
- /* Start up my cpu siblings */
- intel_sibling_init(cpu);
}
static struct device_operations cpu_dev_ops = {
diff --git a/src/cpu/intel/model_206ax/Kconfig b/src/cpu/intel/model_206ax/Kconfig
index d2d4c73..e3e4360 100644
--- a/src/cpu/intel/model_206ax/Kconfig
+++ b/src/cpu/intel/model_206ax/Kconfig
@@ -12,7 +12,6 @@ config CPU_SPECIFIC_OPTIONS
select SSE2
select UDELAY_LAPIC
select SMM_TSEG
- #select AP_IN_SIPI_WAIT
config BOOTBLOCK_CPU_INIT
string
diff --git a/src/cpu/intel/model_206ax/acpi.c b/src/cpu/intel/model_206ax/acpi.c
index 6153174..dea23e7 100644
--- a/src/cpu/intel/model_206ax/acpi.c
+++ b/src/cpu/intel/model_206ax/acpi.c
@@ -26,6 +26,7 @@
#include <arch/acpigen.h>
#include <arch/cpu.h>
#include <cpu/x86/msr.h>
+#include <cpu/x86/lapic.h>
#include <cpu/intel/acpi.h>
#include <cpu/intel/speedstep.h>
#include <cpu/intel/turbo.h>
@@ -88,8 +89,8 @@ static int generate_cstate_entries(acpi_cstate_t *cstates,
static int generate_C_state_entries(void)
{
- struct cpu_info *info;
struct cpu_driver *cpu;
+ struct device *cpu_dev;
int len, lenif;
device_t lapic;
struct cpu_intel_model_206ax_config *conf = NULL;
@@ -103,10 +104,10 @@ static int generate_C_state_entries(void)
return 0;
/* Find CPU map of supported C-states */
- info = cpu_info();
- if (!info)
+ cpu_dev = dev_find_lapic(lapicid());
+ if (!cpu_dev)
return 0;
- cpu = find_cpu_driver(info->cpu);
+ cpu = find_cpu_driver(cpu_dev);
if (!cpu || !cpu->cstates)
return 0;
diff --git a/src/cpu/intel/model_206ax/model_206ax_init.c b/src/cpu/intel/model_206ax/model_206ax_init.c
index 874ce4d..d60c237 100644
--- a/src/cpu/intel/model_206ax/model_206ax_init.c
+++ b/src/cpu/intel/model_206ax/model_206ax_init.c
@@ -414,58 +414,6 @@ static void configure_mca(void)
static unsigned ehci_debug_addr;
#endif
-/*
- * Initialize any extra cores/threads in this package.
- */
-static void intel_cores_init(device_t cpu)
-{
- struct cpuid_result result;
- unsigned cores, threads, i;
-
- result = cpuid_ext(0xb, 0); /* Threads per core */
- threads = result.ebx & 0xff;
-
- result = cpuid_ext(0xb, 1); /* Cores per package */
- cores = result.ebx & 0xff;
-
- /* Only initialize extra cores from BSP */
- if (cpu->path.apic.apic_id)
- return;
-
- printk(BIOS_DEBUG, "CPU: %u has %u cores %u threads\n",
- cpu->path.apic.apic_id, cores, threads);
-
- for (i = 1; i < cores; ++i) {
- struct device_path cpu_path;
- device_t new;
-
- /* Build the cpu device path */
- cpu_path.type = DEVICE_PATH_APIC;
- cpu_path.apic.apic_id =
- cpu->path.apic.apic_id + i;
-
- /* Update APIC ID if no hyperthreading */
- if (threads == 1)
- cpu_path.apic.apic_id <<= 1;
-
- /* Allocate the new cpu device structure */
- new = alloc_dev(cpu->bus, &cpu_path);
- if (!new)
- continue;
-
- printk(BIOS_DEBUG, "CPU: %u has core %u\n",
- cpu->path.apic.apic_id,
- new->path.apic.apic_id);
-
- /* Start the new cpu */
- if (!start_cpu(new)) {
- /* Record the error in cpu? */
- printk(BIOS_ERR, "CPU %u would not start!\n",
- new->path.apic.apic_id);
- }
- }
-}
-
static void model_206ax_init(device_t cpu)
{
char processor_name[49];
@@ -528,9 +476,6 @@ static void model_206ax_init(device_t cpu)
/* Enable Turbo */
enable_turbo();
-
- /* Start up extra cores */
- intel_cores_init(cpu);
}
static struct device_operations cpu_dev_ops = {
diff --git a/src/cpu/intel/model_6ex/Kconfig b/src/cpu/intel/model_6ex/Kconfig
index 31d24bd..c3faa39 100644
--- a/src/cpu/intel/model_6ex/Kconfig
+++ b/src/cpu/intel/model_6ex/Kconfig
@@ -3,4 +3,3 @@ config CPU_INTEL_MODEL_6EX
select SMP
select SSE2
select UDELAY_LAPIC
- select AP_IN_SIPI_WAIT
diff --git a/src/cpu/intel/model_6ex/model_6ex_init.c b/src/cpu/intel/model_6ex/model_6ex_init.c
index 1c8c72b..a0afd2e 100644
--- a/src/cpu/intel/model_6ex/model_6ex_init.c
+++ b/src/cpu/intel/model_6ex/model_6ex_init.c
@@ -205,9 +205,6 @@ static void model_6ex_init(device_t cpu)
/* PIC thermal sensor control */
configure_pic_thermal_sensors();
-
- /* Start up my cpu siblings */
- intel_sibling_init(cpu);
}
static struct device_operations cpu_dev_ops = {
diff --git a/src/cpu/intel/model_6fx/Kconfig b/src/cpu/intel/model_6fx/Kconfig
index 851685c..065cdd9 100644
--- a/src/cpu/intel/model_6fx/Kconfig
+++ b/src/cpu/intel/model_6fx/Kconfig
@@ -3,4 +3,3 @@ config CPU_INTEL_MODEL_6FX
select SMP
select SSE2
select UDELAY_LAPIC
- select AP_IN_SIPI_WAIT
diff --git a/src/cpu/intel/model_6fx/model_6fx_init.c b/src/cpu/intel/model_6fx/model_6fx_init.c
index 106719e..c5d7a6b 100644
--- a/src/cpu/intel/model_6fx/model_6fx_init.c
+++ b/src/cpu/intel/model_6fx/model_6fx_init.c
@@ -243,9 +243,6 @@ static void model_6fx_init(device_t cpu)
/* PIC thermal sensor control */
configure_pic_thermal_sensors();
-
- /* Start up my cpu siblings */
- intel_sibling_init(cpu);
}
static struct device_operations cpu_dev_ops = {
diff --git a/src/cpu/intel/model_f2x/model_f2x_init.c b/src/cpu/intel/model_f2x/model_f2x_init.c
index ec78672..51b72a3 100644
--- a/src/cpu/intel/model_f2x/model_f2x_init.c
+++ b/src/cpu/intel/model_f2x/model_f2x_init.c
@@ -7,7 +7,6 @@
#include <cpu/x86/msr.h>
#include <cpu/x86/lapic.h>
#include <cpu/intel/microcode.h>
-#include <cpu/intel/hyperthreading.h>
#include <cpu/x86/cache.h>
/* 512KB cache */
@@ -56,9 +55,6 @@ static void model_f2x_init(device_t cpu)
/* Enable the local cpu apics */
setup_lapic();
-
- /* Start up my cpu siblings */
- intel_sibling_init(cpu);
};
static struct device_operations cpu_dev_ops = {
diff --git a/src/cpu/intel/model_f3x/model_f3x_init.c b/src/cpu/intel/model_f3x/model_f3x_init.c
index 580c98b..ca346da 100644
--- a/src/cpu/intel/model_f3x/model_f3x_init.c
+++ b/src/cpu/intel/model_f3x/model_f3x_init.c
@@ -7,7 +7,6 @@
#include <cpu/x86/msr.h>
#include <cpu/x86/lapic.h>
#include <cpu/intel/microcode.h>
-#include <cpu/intel/hyperthreading.h>
#include <cpu/x86/cache.h>
static uint32_t microcode_updates[] = {
@@ -39,9 +38,6 @@ static void model_f3x_init(device_t cpu)
/* Enable the local cpu apics */
setup_lapic();
-
- /* Start up my cpu siblings */
- intel_sibling_init(cpu);
};
static struct device_operations cpu_dev_ops = {
diff --git a/src/cpu/intel/model_f4x/model_f4x_init.c b/src/cpu/intel/model_f4x/model_f4x_init.c
index 54edf2e..c857cef 100644
--- a/src/cpu/intel/model_f4x/model_f4x_init.c
+++ b/src/cpu/intel/model_f4x/model_f4x_init.c
@@ -7,7 +7,6 @@
#include <cpu/x86/msr.h>
#include <cpu/x86/lapic.h>
#include <cpu/intel/microcode.h>
-#include <cpu/intel/hyperthreading.h>
#include <cpu/x86/cache.h>
static uint32_t microcode_updates[] = {
@@ -47,9 +46,6 @@ static void model_f4x_init(device_t cpu)
/* Enable the local cpu apics */
setup_lapic();
-
- /* Start up my cpu siblings */
- intel_sibling_init(cpu);
};
static struct device_operations cpu_dev_ops = {
diff --git a/src/cpu/intel/socket_LGA771/Kconfig b/src/cpu/intel/socket_LGA771/Kconfig
index 62bd17b..f549210 100644
--- a/src/cpu/intel/socket_LGA771/Kconfig
+++ b/src/cpu/intel/socket_LGA771/Kconfig
@@ -3,4 +3,3 @@ config CPU_INTEL_SOCKET_LGA771
select CPU_INTEL_MODEL_6FX
select SSE2
select MMX
- select AP_IN_SIPI_WAIT
diff --git a/src/cpu/x86/lapic/lapic_cpu_init.c b/src/cpu/x86/lapic/lapic_cpu_init.c
index e491d46..60cacd5 100644
--- a/src/cpu/x86/lapic/lapic_cpu_init.c
+++ b/src/cpu/x86/lapic/lapic_cpu_init.c
@@ -66,31 +66,28 @@ static void copy_secondary_start_to_1m_below(void)
printk(BIOS_DEBUG, "start_eip=0x%08lx, offset=0x%08lx, code_size=0x%08lx\n", start_eip, ((unsigned long)_secondary_start - start_eip), code_size);
}
-static int lapic_start_cpu(unsigned long apicid)
+static struct bus *current_cpu_bus;
+
+static int lapic_start_cpus(struct bus *cpu_bus)
{
int timeout;
unsigned long send_status, accept_status, start_eip;
- int j, num_starts, maxlvt;
+ int maxlvt;
/*
* Starting actual IPI sequence...
*/
- printk(BIOS_SPEW, "Asserting INIT.\n");
-
- /*
- * Turn INIT on target chip
- */
- lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(apicid));
+ current_cpu_bus = cpu_bus;
- /*
- * Send IPI
- */
+ printk(BIOS_SPEW, "Asserting INIT.\n");
- lapic_write_around(LAPIC_ICR, LAPIC_INT_LEVELTRIG | LAPIC_INT_ASSERT
- | LAPIC_DM_INIT);
+ /* Send INIT SIPI to target chip */
+ lapic_write_around(LAPIC_ICR2, 0);
+ lapic_write_around(LAPIC_ICR, LAPIC_INT_ASSERT
+ | LAPIC_DM_INIT | LAPIC_DEST_ALLBUT);
- printk(BIOS_SPEW, "Waiting for send to finish...\n");
+ printk(BIOS_DEBUG, "Waiting for send to finish...\n");
timeout = 0;
do {
printk(BIOS_SPEW, "+");
@@ -98,108 +95,67 @@ static int lapic_start_cpu(unsigned long apicid)
send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY;
} while (send_status && (timeout++ < 1000));
if (timeout >= 1000) {
- printk(BIOS_ERR, "CPU %ld: First apic write timed out. Disabling\n",
- apicid);
+ printk(BIOS_DEBUG, "First apic write timed out. Disabling\n");
// too bad.
- printk(BIOS_ERR, "ESR is 0x%lx\n", lapic_read(LAPIC_ESR));
+ printk(BIOS_DEBUG, "ESR is 0x%lx\n", lapic_read(LAPIC_ESR));
if (lapic_read(LAPIC_ESR)) {
- printk(BIOS_ERR, "Try to reset ESR\n");
+ printk(BIOS_DEBUG, "Try to reset ESR\n");
lapic_write_around(LAPIC_ESR, 0);
- printk(BIOS_ERR, "ESR is 0x%lx\n", lapic_read(LAPIC_ESR));
+ printk(BIOS_DEBUG, "ESR is 0x%lx\n", lapic_read(LAPIC_ESR));
}
return 0;
}
-#if !CONFIG_CPU_AMD_MODEL_10XXX && !CONFIG_CPU_INTEL_MODEL_206AX
- mdelay(10);
-#endif
+ start_eip = get_valid_start_eip((unsigned long)_secondary_start);
+
+ maxlvt = 4;
+
+ printk(BIOS_SPEW, "Sending STARTUP.\n");
+ lapic_read_around(LAPIC_SPIV);
+ lapic_write(LAPIC_ESR, 0);
+ lapic_read(LAPIC_ESR);
+ printk(BIOS_SPEW, "After apic_write.\n");
- printk(BIOS_SPEW, "Deasserting INIT.\n");
+ /*
+ * STARTUP IPI
+ */
/* Target chip */
- lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(apicid));
+ lapic_write_around(LAPIC_ICR2, 0);
- /* Send IPI */
- lapic_write_around(LAPIC_ICR, LAPIC_INT_LEVELTRIG | LAPIC_DM_INIT);
+ /* Boot on the stack */
+ /* Kick the second */
+ lapic_write_around(LAPIC_ICR, LAPIC_INT_ASSERT | LAPIC_DM_STARTUP | LAPIC_DEST_ALLBUT
+ | (start_eip >> 12));
- printk(BIOS_SPEW, "Waiting for send to finish...\n");
+ /*
+ * Give the other CPU some time to accept the IPI.
+ */
+ udelay(300);
+
+ printk(BIOS_DEBUG, "Startup point 1.\n");
+
+ printk(BIOS_DEBUG, "Waiting for send to finish...\n");
timeout = 0;
do {
- printk(BIOS_SPEW, "+");
+ printk(BIOS_DEBUG, "+");
udelay(100);
send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY;
} while (send_status && (timeout++ < 1000));
- if (timeout >= 1000) {
- printk(BIOS_ERR, "CPU %ld: Second apic write timed out. Disabling\n",
- apicid);
- // too bad.
- return 0;
- }
-
- start_eip = get_valid_start_eip((unsigned long)_secondary_start);
-
-#if !CONFIG_CPU_AMD_MODEL_10XXX
- num_starts = 2;
-#else
- num_starts = 1;
-#endif
/*
- * Run STARTUP IPI loop.
+ * Give the other CPU some time to accept the IPI.
*/
- printk(BIOS_SPEW, "#startup loops: %d.\n", num_starts);
-
- maxlvt = 4;
-
- for (j = 1; j <= num_starts; j++) {
- printk(BIOS_SPEW, "Sending STARTUP #%d to %lu.\n", j, apicid);
+ udelay(200);
+ /*
+ * Due to the Pentium erratum 3AP.
+ */
+ if (maxlvt > 3) {
lapic_read_around(LAPIC_SPIV);
lapic_write(LAPIC_ESR, 0);
- lapic_read(LAPIC_ESR);
- printk(BIOS_SPEW, "After apic_write.\n");
-
- /*
- * STARTUP IPI
- */
-
- /* Target chip */
- lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(apicid));
-
- /* Boot on the stack */
- /* Kick the second */
- lapic_write_around(LAPIC_ICR, LAPIC_DM_STARTUP
- | (start_eip >> 12));
-
- /*
- * Give the other CPU some time to accept the IPI.
- */
- udelay(300);
-
- printk(BIOS_SPEW, "Startup point 1.\n");
-
- printk(BIOS_SPEW, "Waiting for send to finish...\n");
- timeout = 0;
- do {
- printk(BIOS_SPEW, "+");
- udelay(100);
- send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY;
- } while (send_status && (timeout++ < 1000));
-
- /*
- * Give the other CPU some time to accept the IPI.
- */
- udelay(200);
- /*
- * Due to the Pentium erratum 3AP.
- */
- if (maxlvt > 3) {
- lapic_read_around(LAPIC_SPIV);
- lapic_write(LAPIC_ESR, 0);
- }
- accept_status = (lapic_read(LAPIC_ESR) & 0xEF);
- if (send_status || accept_status)
- break;
}
- printk(BIOS_SPEW, "After Startup.\n");
+ accept_status = (lapic_read(LAPIC_ESR) & 0xEF);
+
+ printk(BIOS_DEBUG, "After Startup.\n");
if (send_status)
printk(BIOS_WARNING, "APIC never delivered???\n");
if (accept_status)
@@ -209,156 +165,34 @@ static int lapic_start_cpu(unsigned long apicid)
return 1;
}
+
/* Number of cpus that are currently running in coreboot */
static atomic_t active_cpus = ATOMIC_INIT(1);
-/* start_cpu_lock covers last_cpu_index and secondary_stack.
- * Only starting one cpu at a time let's me remove the logic
- * for select the stack from assembly language.
- *
- * In addition communicating by variables to the cpu I
- * am starting allows me to veryify it has started before
- * start_cpu returns.
- */
-
-static spinlock_t start_cpu_lock = SPIN_LOCK_UNLOCKED;
-static unsigned last_cpu_index = 0;
volatile unsigned long secondary_stack;
+extern unsigned char _estack[];
-int start_cpu(device_t cpu)
+static void stop_all_ap_cpus(void)
{
- extern unsigned char _estack[];
- struct cpu_info *info;
- unsigned long stack_end;
- unsigned long apicid;
- unsigned long index;
- unsigned long count;
- int result;
-
- spin_lock(&start_cpu_lock);
-
- /* Get the cpu's apicid */
- apicid = cpu->path.apic.apic_id;
-
- /* Get an index for the new processor */
- index = ++last_cpu_index;
-
- /* Find end of the new processors stack */
- stack_end = ((unsigned long)_estack) - (CONFIG_STACK_SIZE*index) - sizeof(struct cpu_info);
-
- /* Record the index and which cpu structure we are using */
- info = (struct cpu_info *)stack_end;
- info->index = index;
- info->cpu = cpu;
-
- /* Advertise the new stack to start_cpu */
- secondary_stack = stack_end;
-
- /* Until the cpu starts up report the cpu is not enabled */
- cpu->enabled = 0;
- cpu->initialized = 0;
-
- /* Start the cpu */
- result = lapic_start_cpu(apicid);
-
- if (result) {
- result = 0;
- /* Wait 1s or until the new cpu calls in */
- for(count = 0; count < 100000 ; count++) {
- if (secondary_stack == 0) {
- result = 1;
- break;
- }
- udelay(10);
- }
- }
- secondary_stack = 0;
- spin_unlock(&start_cpu_lock);
- return result;
-}
-
-#if CONFIG_AP_IN_SIPI_WAIT
-
-/**
- * Sending INIT IPI to self is equivalent of asserting #INIT with a bit of delay.
- * An undefined number of instruction cycles will complete. All global locks
- * must be released before INIT IPI and no printk is allowed after this.
- * De-asserting INIT IPI is a no-op on later Intel CPUs.
- *
- * If you set DEBUG_HALT_SELF to 1, printk's after INIT IPI are enabled
- * but running thread may halt without releasing the lock and effectively
- * deadlock other CPUs.
- */
-#define DEBUG_HALT_SELF 0
-
-/**
- * Normally this function is defined in lapic.h as an always inline function
- * that just keeps the CPU in a hlt() loop. This does not work on all CPUs.
- * I think all hyperthreading CPUs might need this version, but I could only
- * verify this on the Intel Core Duo
- */
-void stop_this_cpu(void)
-{
- int timeout;
unsigned long send_status;
- unsigned long id;
-
- id = lapic_read(LAPIC_ID) >> 24;
-
- printk(BIOS_DEBUG, "CPU %ld going down...\n", id);
-
- /* send an LAPIC INIT to myself */
- lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(id));
- lapic_write_around(LAPIC_ICR, LAPIC_INT_LEVELTRIG | LAPIC_INT_ASSERT | LAPIC_DM_INIT);
+ int timeout;
+ /* send an LAPIC INIT to all but myself */
+ lapic_write_around(LAPIC_ICR2, 0);
+ lapic_write_around(LAPIC_ICR, LAPIC_INT_ASSERT | LAPIC_DM_INIT | LAPIC_DEST_ALLBUT);
/* wait for the ipi send to finish */
-#if DEBUG_HALT_SELF
printk(BIOS_SPEW, "Waiting for send to finish...\n");
-#endif
timeout = 0;
do {
-#if DEBUG_HALT_SELF
printk(BIOS_SPEW, "+");
-#endif
udelay(100);
send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY;
} while (send_status && (timeout++ < 1000));
if (timeout >= 1000) {
-#if DEBUG_HALT_SELF
printk(BIOS_ERR, "timed out\n");
-#endif
}
mdelay(10);
-
-#if DEBUG_HALT_SELF
- printk(BIOS_SPEW, "Deasserting INIT.\n");
-#endif
- /* Deassert the LAPIC INIT */
- lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(id));
- lapic_write_around(LAPIC_ICR, LAPIC_INT_LEVELTRIG | LAPIC_DM_INIT);
-
-#if DEBUG_HALT_SELF
- printk(BIOS_SPEW, "Waiting for send to finish...\n");
-#endif
- timeout = 0;
- do {
-#if DEBUG_HALT_SELF
- printk(BIOS_SPEW, "+");
-#endif
- udelay(100);
- send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY;
- } while (send_status && (timeout++ < 1000));
- if (timeout >= 1000) {
-#if DEBUG_HALT_SELF
- printk(BIOS_ERR, "timed out\n");
-#endif
- }
-
- while(1) {
- hlt();
- }
}
-#endif
#ifdef __SSE3__
static __inline__ __attribute__((always_inline)) unsigned long readcr4(void)
@@ -383,64 +217,19 @@ static __inline__ __attribute__((always_inline)) void writecr4(unsigned long Dat
/* C entry point of secondary cpus */
void secondary_cpu_init(void)
{
- atomic_inc(&active_cpus);
-#if CONFIG_SERIAL_CPU_INIT
- spin_lock(&start_cpu_lock);
-#endif
-
#ifdef __SSE3__
- /*
- * Seems that CR4 was cleared when AP start via lapic_start_cpu()
- * Turn on CR4.OSFXSR and CR4.OSXMMEXCPT when SSE options enabled
- */
- u32 cr4_val;
- cr4_val = readcr4();
- cr4_val |= (1 << 9 | 1 << 10);
- writecr4(cr4_val);
-#endif
- cpu_initialize();
-#if CONFIG_SERIAL_CPU_INIT
- spin_unlock(&start_cpu_lock);
+ /*
+ * Seems that CR4 was cleared when AP start via lapic_start_cpu()
+ * Turn on CR4.OSFXSR and CR4.OSXMMEXCPT when SSE options enabled
+ */
+ u32 cr4_val;
+ cr4_val = readcr4();
+ cr4_val |= (1 << 9 | 1 << 10);
+ writecr4(cr4_val);
#endif
-
+ atomic_inc(&active_cpus);
+ cpu_initialize(current_cpu_bus);
atomic_dec(&active_cpus);
-
- stop_this_cpu();
-}
-
-static void start_other_cpus(struct bus *cpu_bus, device_t bsp_cpu)
-{
- device_t cpu;
- /* Loop through the cpus once getting them started */
-
- for(cpu = cpu_bus->children; cpu ; cpu = cpu->sibling) {
- if (cpu->path.type != DEVICE_PATH_APIC) {
- continue;
- }
- #if !CONFIG_SERIAL_CPU_INIT
- if(cpu==bsp_cpu) {
- continue;
- }
- #endif
-
- if (!cpu->enabled) {
- continue;
- }
-
- if (cpu->initialized) {
- continue;
- }
-
- if (!start_cpu(cpu)) {
- /* Record the error in cpu? */
- printk(BIOS_ERR, "CPU 0x%02x would not start!\n",
- cpu->path.apic.apic_id);
- }
-#if CONFIG_SERIAL_CPU_INIT
- udelay(10);
-#endif
- }
-
}
static void wait_other_cpus_stop(struct bus *cpu_bus)
@@ -473,6 +262,7 @@ static void wait_other_cpus_stop(struct bus *cpu_bus)
cpu->path.apic.apic_id);
}
}
+ stop_all_ap_cpus();
printk(BIOS_DEBUG, "All AP CPUs stopped (%ld loops)\n", loopcount);
}
@@ -481,10 +271,6 @@ static void wait_other_cpus_stop(struct bus *cpu_bus)
void initialize_cpus(struct bus *cpu_bus)
{
struct device_path cpu_path;
- struct cpu_info *info;
-
- /* Find the info struct for this cpu */
- info = cpu_info();
#if NEED_LAPIC == 1
/* Ensure the local apic is enabled */
@@ -499,9 +285,6 @@ void initialize_cpus(struct bus *cpu_bus)
cpu_path.cpu.id = 0;
#endif
- /* Find the device structure for the boot cpu */
- info->cpu = alloc_find_dev(cpu_bus, &cpu_path);
-
#if CONFIG_SMP
copy_secondary_start_to_1m_below(); // why here? In case some day we can start core1 in amd_sibling_init
#endif
@@ -512,21 +295,11 @@ void initialize_cpus(struct bus *cpu_bus)
cpus_ready_for_init();
-#if CONFIG_SMP
- #if !CONFIG_SERIAL_CPU_INIT
- /* start all aps at first, so we can init ECC all together */
- start_other_cpus(cpu_bus, info->cpu);
- #endif
-#endif
-
/* Initialize the bootstrap processor */
- cpu_initialize();
+ cpu_initialize(cpu_bus);
#if CONFIG_SMP
- #if CONFIG_SERIAL_CPU_INIT
- start_other_cpus(cpu_bus, info->cpu);
- #endif
-
+ lapic_start_cpus(cpu_bus);
/* Now wait the rest of the cpus stop*/
wait_other_cpus_stop(cpu_bus);
#endif
diff --git a/src/cpu/x86/lapic/secondary.S b/src/cpu/x86/lapic/secondary.S
index dc00b08..0ff68b6 100644
--- a/src/cpu/x86/lapic/secondary.S
+++ b/src/cpu/x86/lapic/secondary.S
@@ -2,7 +2,7 @@
#include <cpu/x86/lapic_def.h>
.text
- .globl _secondary_start, _secondary_start_end
+ .globl _secondary_start, _secondary_start_end, apcount
.balign 4096
_secondary_start:
.code16
@@ -38,10 +38,19 @@ _secondary_start:
/* Load the Interrupt descriptor table */
lidt idtarg
- /* Set the stack pointer, and flag that we are done */
- xorl %eax, %eax
- movl secondary_stack, %esp
- movl %eax, secondary_stack
+apcount:
+ .long 0
+
+ /* increment our cpu index */
+ movl $1, %eax
+ lock xadd %eax, apcount
+ incl %eax
+
+ /* assign stack for this specific cpu */
+ mov _stack, %esp
+ mov $CONFIG_STACK_SIZE, %ebx
+ mul %ebx
+ add %eax, %esp
call secondary_cpu_init
1: hlt
diff --git a/src/cpu/x86/pae/pgtbl.c b/src/cpu/x86/pae/pgtbl.c
index 814c5f1..7aa17c2 100644
--- a/src/cpu/x86/pae/pgtbl.c
+++ b/src/cpu/x86/pae/pgtbl.c
@@ -3,8 +3,10 @@
*/
#include <console/console.h>
+#include <device/device.h>
#include <cpu/cpu.h>
#include <cpu/x86/pae.h>
+#include <cpu/x86/lapic.h>
#include <string.h>
static void paging_off(void)
@@ -43,6 +45,14 @@ static void paging_on(void *pdp)
);
}
+static int cpu_index(void)
+{
+ device_t dev = dev_find_lapic(lapicid());
+ if (!dev)
+ return -1;
+ return dev->path.apic.index;
+}
+
void *map_2M_page(unsigned long page)
{
struct pde {
@@ -60,7 +70,9 @@ void *map_2M_page(unsigned long page)
unsigned long window;
void *result;
int i;
+
index = cpu_index();
+
if ((index < 0) || (index >= CONFIG_MAX_CPUS)) {
return MAPPING_ERROR;
}
diff --git a/src/drivers/i2c/w83795/w83795.c b/src/drivers/i2c/w83795/w83795.c
index 392471a..12be4da 100644
--- a/src/drivers/i2c/w83795/w83795.c
+++ b/src/drivers/i2c/w83795/w83795.c
@@ -22,6 +22,7 @@
#include <console/console.h>
#include <device/device.h>
#include "southbridge/amd/cimx/sb700/smbus.h" /*SMBUS_IO_BASE*/
+#include <cpu/x86/lapic.h>
#include "w83795.h"
static u32 w83795_set_bank(u8 bank)
@@ -224,10 +225,8 @@ static void w83795_init(w83795_fan_mode_t mode, u8 dts_src)
static void w83795_hwm_init(device_t dev)
{
struct device *cpu;
- struct cpu_info *info;
- info = cpu_info();
- cpu = info->cpu;
+ cpu = dev_find_lapic(lapicid());
if (!cpu)
die("CPU: missing cpu device structure");
diff --git a/src/include/cpu/cpu.h b/src/include/cpu/cpu.h
index c2113c1..120e955 100644
--- a/src/include/cpu/cpu.h
+++ b/src/include/cpu/cpu.h
@@ -4,11 +4,13 @@
#include <arch/cpu.h>
#if !defined(__ROMCC__)
-void cpu_initialize(void);
+void cpu_initialize(struct bus *cpu_bus);
struct bus;
void initialize_cpus(struct bus *cpu_bus);
void secondary_cpu_init(void);
+extern unsigned int apcount;
+
#if !CONFIG_WAIT_BEFORE_CPUS_INIT
#define cpus_ready_for_init() do {} while(0)
#else
diff --git a/src/include/cpu/x86/lapic.h b/src/include/cpu/x86/lapic.h
index 078f2a7..ce61ee5 100644
--- a/src/include/cpu/x86/lapic.h
+++ b/src/include/cpu/x86/lapic.h
@@ -52,21 +52,6 @@ static inline __attribute__((always_inline)) unsigned long lapicid(void)
}
#ifndef __ROMCC__
-#if CONFIG_AP_IN_SIPI_WAIT != 1
-/* If we need to go back to sipi wait, we use the long non-inlined version of
- * this function in lapic_cpu_init.c
- */
-static inline __attribute__((always_inline)) void stop_this_cpu(void)
-{
- /* Called by an AP when it is ready to halt and wait for a new task */
- for(;;) {
- hlt();
- }
-}
-#else
-void stop_this_cpu(void);
-#endif
-
#if !defined(__PRE_RAM__)
#define xchg(ptr,v) ((__typeof__(*(ptr)))__xchg((unsigned long)(v),(ptr),sizeof(*(ptr))))
diff --git a/src/include/device/path.h b/src/include/device/path.h
index 63e9538..018fb93 100644
--- a/src/include/device/path.h
+++ b/src/include/device/path.h
@@ -40,6 +40,7 @@ struct apic_path
unsigned apic_id;
unsigned node_id;
unsigned core_id;
+ unsigned index;
};
struct apic_cluster_path
More information about the coreboot
mailing list