[coreboot] QEMU version step-by-step

[David Griffith]

Would someone post step-by-step instructions for building coreboot for 
QEMU and then starting QEMU?  I keep getting problems like this:

Multiboot Information structure has been written.
  0. FREE SPACE 07fe9c00 00016400
  1. GDT        07fe0200 00000200
  2. IRQ TABLE  07fe0400 00001000
  3. SMBIOS     07fe1400 00000800
  4. COREBOOT   07fe1c00 00008000
CBFS: Looking for 'fallback/payload'
CBFS: found.
Got a payload
CPU0: stack from 00118000 to 00120000:Lowest stack address 0011fba8
Loading segment from rom address 0xfffc97f8
   code (compression=1)
   New segment dstaddr 0xe5fac memsize 0x1a054 srcaddr 0xfffc9830 filesize 0xd0e2
   (cleaned up) New segment addr 0xe5fac size 0x1a054 offset 0xfffc9830 
filesize 0xd0e2
Loading segment from rom address 0xfffc9814
   Entry Point 0x00000000
Loading Segment: addr: 0x00000000000e5fac memsz: 0x000000000001a054 
filesz: 0x000000000000d0e2
lb: [0x0000000000100000, 0x0000000000124000)
Post relocation: addr: 0x00000000000e5fac memsz: 0x000000000001a054 
filesz: 0x000000000000d0e2
using LZMA
lzma: Decoding error = 1
Boot failed

-- 
David Griffith
dave at 661.org