[coreboot] ASRock E350M1: Linux dmesg: ACPI: Invalid PBLK length [0]
Paul Menzel
paulepanter at users.sourceforge.net
Mon Jul 2 17:39:50 CEST 2012
Dear coreboot folks,
the image Cristi gave me works fine. Looking through some log files I
notice the following error message in the Linux kernel ring buffer
(`dmesg`).
ACPI: Invalid PBLK length [0]
Please find the full output and the coreboot config attached. Does
someone else have these problems?
Thanks,
Paul
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-3-amd64 (Debian 3.2.21-3) (debian-kernel at lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Thu Jun 28 09:07:26 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64 root=UUID=ae710f86-6af2-4303-a180-93372db1e58f ro init=/bin/systemd quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7fe0000 (usable)
[ 0.000000] BIOS-e820: 00000000c7fe0000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000f9000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000021efffc00 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x21efff max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xc7fe0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fdab0] fdab0
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000c7fe0000
[ 0.000000] init_memory_mapping: 0000000100000000-000000021efff000
[ 0.000000] RAMDISK: 36b80000 - 375b8000
[ 0.000000] ACPI: RSDP 00000000000fda90 00014 (v00 CORE )
[ 0.000000] ACPI: RSDT 00000000c7fe2424 00040 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 00000000c7fe4dd8 000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 00000000c7fe24c8 028CD (v02 ASROCK E350M1 00010001 INTL 20110922)
[ 0.000000] ACPI: FACS 00000000c7fe4d98 00040
[ 0.000000] ACPI: HPET 00000000c7fe4ed0 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 00000000c7fe4f08 0005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HEST 00000000c7fe4f68 00028 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 00000000c7fe4f90 0168E (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: SSDT 00000000c7fe6620 003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000c7fe6a00 00045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000021efff000
[ 0.000000] Initmem setup node 0 0000000000000000-000000021efff000
[ 0.000000] NODE_DATA [000000021effa000 - 000000021effefff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0021efff
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000c7fe0
[ 0.000000] 0: 0x00100000 -> 0x0021efff
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x102282a0 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c7fe0000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000f9000000
[ 0.000000] PM: Registered nosave memory: 00000000f9000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021ec00000 s82816 r8192 d23680 u1048576
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1964193
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64 root=UUID=ae710f86-6af2-4303-a180-93372db1e58f ro init=/bin/systemd quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 7782568k/8896508k available (3409k kernel code, 918084k absent, 195856k reserved, 3324k data, 572k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1599.957 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.91 BogoMIPS (lpj=6399828)
[ 0.004014] pid_max: default: 32768 minimum: 301
[ 0.004102] Security Framework initialized
[ 0.004111] AppArmor: AppArmor disabled by boot time parameter
[ 0.005421] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.013292] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.015941] Mount-cache hash table entries: 256
[ 0.016214] Initializing cgroup subsys cpuacct
[ 0.016224] Initializing cgroup subsys memory
[ 0.016252] Initializing cgroup subsys devices
[ 0.016259] Initializing cgroup subsys freezer
[ 0.016263] Initializing cgroup subsys net_cls
[ 0.016267] Initializing cgroup subsys blkio
[ 0.016281] Initializing cgroup subsys perf_event
[ 0.016370] CPU: Physical Processor ID: 0
[ 0.016373] CPU: Processor Core ID: 0
[ 0.016377] mce: CPU supports 6 MCE banks
[ 0.017261] ACPI: Core revision 20110623
[ 0.022347] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.062048] CPU0: AMD E-350 Processor stepping 00
[ 0.064003] Performance Events: AMD PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 48
[ 0.064003] ... generic registers: 4
[ 0.064003] ... value mask: 0000ffffffffffff
[ 0.064003] ... max period: 00007fffffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000000000f
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] Booting Node 0, Processors #1 Ok.
[ 0.152052] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152096] Brought up 2 CPUs
[ 0.152101] Total of 2 processors activated (6399.88 BogoMIPS).
[ 0.152759] devtmpfs: initialized
[ 0.160452] print_constraints: dummy:
[ 0.160629] NET: Registered protocol family 16
[ 0.161000] Extended Config Space enabled on 0 nodes
[ 0.161022] ACPI: bus type pci registered
[ 0.161206] PCI: Using configuration type 1 for base access
[ 0.161209] PCI: Using configuration type 1 for extended access
[ 0.162682] bio: create slab <bio-0> at 0
[ 0.164195] ACPI: Added _OSI(Module Device)
[ 0.164202] ACPI: Added _OSI(Processor Device)
[ 0.164207] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.164211] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.166671] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.174069] ACPI: Interpreter enabled
[ 0.174076] ACPI: (supports S0 S1 S2 S3 S4 S5)
[ 0.174134] ACPI: BIOS offers _BFS
[ 0.174138] ACPI: If "acpi.bfs=1" improves resume, please notify linux-acpi at vger.kernel.org
[ 0.174143] ACPI: Using IOAPIC for interrupt routing
[ 0.192085] ACPI: No dock devices found.
[ 0.192094] HEST: Table parsing has been initialized.
[ 0.192101] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.192219] [Firmware Bug]: ACPI: no secondary bus range in _CRS
[ 0.192242] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.192496] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.192502] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.192507] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.192512] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xffffffff]
[ 0.193072] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.195132] pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.195256] pci 0000:00:15.0: PCI bridge to [bus 02-ff]
[ 0.200161] pci 0000:00:15.1: PCI bridge to [bus 03-ff]
[ 0.201282] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.201289] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.201293] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.214853] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.215093] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.215330] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.215566] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.215802] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.216040] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0
[ 0.216215] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.216452] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.216850] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.216850] vgaarb: loaded
[ 0.216850] vgaarb: bridge control possible 0000:00:01.0
[ 0.216850] PCI: Using ACPI for IRQ routing
[ 0.216850] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.216850] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.218820] Switching to clocksource hpet
[ 0.219900] pnp: PnP ACPI init
[ 0.219945] ACPI: bus type pnp registered
[ 0.221446] pnp: PnP ACPI: found 5 devices
[ 0.221450] ACPI: ACPI bus type pnp unregistered
[ 0.245563] pci 0000:00:15.1: BAR 15: assigned [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.245571] pci 0000:00:15.1: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.245578] pci 0000:00:14.4: PCI bridge to [bus 01-01]
[ 0.245665] pci 0000:00:15.0: PCI bridge to [bus 02-02]
[ 0.245685] pci 0000:03:00.0: BAR 4: assigned [mem 0xf0100000-0xf0103fff 64bit pref]
[ 0.245700] pci 0000:03:00.0: BAR 4: set to [mem 0xf0100000-0xf0103fff 64bit pref] (PCI address [0xf0100000-0xf0103fff])
[ 0.245706] pci 0000:03:00.0: BAR 2: assigned [mem 0xf0104000-0xf0104fff 64bit pref]
[ 0.245720] pci 0000:03:00.0: BAR 2: set to [mem 0xf0104000-0xf0104fff 64bit pref] (PCI address [0xf0104000-0xf0104fff])
[ 0.245726] pci 0000:03:00.0: BAR 0: assigned [io 0x2000-0x20ff]
[ 0.245735] pci 0000:03:00.0: BAR 0: set to [io 0x2000-0x20ff] (PCI address [0x2000-0x20ff])
[ 0.245740] pci 0000:00:15.1: PCI bridge to [bus 03-03]
[ 0.245746] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff]
[ 0.245756] pci 0000:00:15.1: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.245814] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.245834] pci 0000:00:15.1: enabling device (0000 -> 0003)
[ 0.245841] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.246131] NET: Registered protocol family 2
[ 0.246696] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.249803] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.254926] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.255500] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.255506] TCP reno registered
[ 0.255544] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.255662] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.256299] NET: Registered protocol family 1
[ 0.256452] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.256495] pci 0000:00:12.0: PCI INT A disabled
[ 0.256518] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.256590] pci 0000:00:12.2: PCI INT B disabled
[ 0.256604] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.256666] pci 0000:00:13.0: PCI INT A disabled
[ 0.256681] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.256722] pci 0000:00:13.2: PCI INT B disabled
[ 0.256750] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.256813] pci 0000:00:14.5: PCI INT C disabled
[ 0.256973] Unpacking initramfs...
[ 0.685025] Freeing initrd memory: 10464k freed
[ 0.691585] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.691594] Placing 64MB software IO TLB between ffff8800c3fdd000 - ffff8800c7fdd000
[ 0.691599] software IO TLB at phys 0xc3fdd000 - 0xc7fdd000
[ 0.692785] perf: AMD IBS detected (0x000000ff)
[ 0.693678] audit: initializing netlink socket (disabled)
[ 0.693707] type=2000 audit(1341242821.692:1): initialized
[ 0.746837] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.806883] VFS: Disk quotas dquot_6.5.2
[ 0.807020] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.807234] msgmni has been set to 15220
[ 0.808341] alg: No test for stdrng (krng)
[ 0.808565] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.808574] io scheduler noop registered
[ 0.808577] io scheduler deadline registered
[ 0.808715] io scheduler cfq registered (default)
[ 0.809139] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.809201] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.809205] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.809830] ERST: Table is not found!
[ 0.809872] GHES: Failed to enable APEI firmware first mode.
[ 0.810264] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.830934] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.869630] Linux agpgart interface v0.103
[ 0.869889] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.873689] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.873711] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.874423] mousedev: PS/2 mouse device common for all mice
[ 0.874585] rtc_cmos 00:01: RTC can wake from S4
[ 0.874973] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.875087] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.875116] cpuidle: using governor ladder
[ 0.875120] cpuidle: using governor menu
[ 0.875615] TCP cubic registered
[ 0.875859] NET: Registered protocol family 10
[ 0.877082] Mobile IPv6
[ 0.877088] NET: Registered protocol family 17
[ 0.877097] Registering the dns_resolver key type
[ 0.878201] registered taskstats version 1
[ 0.907098] hpet1: lost 1 rtc interrupts
[ 0.907845] rtc_cmos 00:01: setting system clock to 2012-07-02 15:27:02 UTC (1341242822)
[ 0.907916] Initializing network drop monitor service
[ 0.910412] Freeing unused kernel memory: 572k freed
[ 0.910673] Write protecting the kernel read-only data: 6144k
[ 0.916343] Freeing unused kernel memory: 668k freed
[ 0.922157] Freeing unused kernel memory: 684k freed
[ 0.959998] udevd[49]: starting version 175
[ 1.015512] usbcore: registered new interface driver usbfs
[ 1.015561] usbcore: registered new interface driver hub
[ 1.034950] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.035052] r8169 0000:03:00.0: enabling device (0000 -> 0003)
[ 1.035068] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.049382] usbcore: registered new device driver usb
[ 1.050351] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.050472] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.050509] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.050559] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.050644] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.050776] ehci_hcd 0000:00:12.2: debug port 1
[ 1.050821] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf004b400
[ 1.053017] r8169 0000:03:00.0: eth0: RTL8168e/8111e at 0xffffc90000c16000, 00:25:22:f8:1f:c8, XID 0c200000 IRQ 40
[ 1.053026] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.056596] SCSI subsystem initialized
[ 1.060435] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.060509] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.060515] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.060520] usb usb1: Product: EHCI Host Controller
[ 1.060524] usb usb1: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
[ 1.060528] usb usb1: SerialNumber: 0000:00:12.2
[ 1.060815] hub 1-0:1.0: USB hub found
[ 1.060825] hub 1-0:1.0: 5 ports detected
[ 1.061138] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.061268] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.061286] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.061303] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.061346] ehci_hcd 0000:00:13.2: debug port 1
[ 1.061374] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf004b500
[ 1.064829] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.072397] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.072461] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.072467] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.072472] usb usb2: Product: EHCI Host Controller
[ 1.072476] usb usb2: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
[ 1.072479] usb usb2: SerialNumber: 0000:00:13.2
[ 1.072752] hub 2-0:1.0: USB hub found
[ 1.072767] hub 2-0:1.0: 5 ports detected
[ 1.073084] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.073218] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.073241] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.073369] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf0048000
[ 1.132452] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.132461] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.132466] usb usb3: Product: OHCI Host Controller
[ 1.132470] usb usb3: Manufacturer: Linux 3.2.0-3-amd64 ohci_hcd
[ 1.132474] usb usb3: SerialNumber: 0000:00:12.0
[ 1.132901] hub 3-0:1.0: USB hub found
[ 1.132984] hub 3-0:1.0: 5 ports detected
[ 1.133321] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.133639] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.133646] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
[ 1.135899] scsi0 : ahci
[ 1.136267] scsi1 : ahci
[ 1.136437] scsi2 : ahci
[ 1.136632] scsi3 : ahci
[ 1.136882] ata1: SATA max UDMA/133 abar m1024 at 0xf004b000 port 0xf004b100 irq 19
[ 1.136889] ata2: SATA max UDMA/133 abar m1024 at 0xf004b000 port 0xf004b180 irq 19
[ 1.136895] ata3: SATA max UDMA/133 abar m1024 at 0xf004b000 port 0xf004b200 irq 19
[ 1.136901] ata4: SATA max UDMA/133 abar m1024 at 0xf004b000 port 0xf004b280 irq 19
[ 1.137046] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.137163] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.137188] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 1.137229] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0049000
[ 1.196350] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.196359] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.196364] usb usb4: Product: OHCI Host Controller
[ 1.196368] usb usb4: Manufacturer: Linux 3.2.0-3-amd64 ohci_hcd
[ 1.196371] usb usb4: SerialNumber: 0000:00:13.0
[ 1.196865] hub 4-0:1.0: USB hub found
[ 1.196881] hub 4-0:1.0: 5 ports detected
[ 1.197182] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.197232] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.197250] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
[ 1.197288] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf004a000
[ 1.256356] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.256365] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.256370] usb usb5: Product: OHCI Host Controller
[ 1.256374] usb usb5: Manufacturer: Linux 3.2.0-3-amd64 ohci_hcd
[ 1.256377] usb usb5: SerialNumber: 0000:00:14.5
[ 1.256906] hub 5-0:1.0: USB hub found
[ 1.256930] hub 5-0:1.0: 2 ports detected
[ 1.456377] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.456426] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.456466] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.628331] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.629096] ata4.00: ATA-9: M4-CT256M4SSD2, 0309, max UDMA/100
[ 1.629105] ata4.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.629993] ata4.00: configured for UDMA/100
[ 1.630592] scsi 3:0:0:0: Direct-Access ATA M4-CT256M4SSD2 0309 PQ: 0 ANSI: 5
[ 1.642581] sd 3:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.643056] sd 3:0:0:0: [sda] Write Protect is off
[ 1.643121] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.648408] sda: sda1 sda2 sda3
[ 1.649996] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.688158] Refined TSC clocksource calibration: 1599.999 MHz.
[ 1.688171] Switching to clocksource tsc
[ 1.962631] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[ 1.962639] EXT4-fs (sda2): write access will be enabled during recovery
[ 2.031776] EXT4-fs (sda2): recovery complete
[ 2.032760] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.733859] fuse init (API version 7.17)
[ 2.743586] w83627ehf: Found NCT6775F chip at 0x290
[ 2.743902] hwmon_vid: Unknown VRM version of your x86 CPU
[ 2.920496] udevd[235]: starting version 175
[ 3.076819] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 3.076834] ACPI: Power Button [PWRB]
[ 3.076957] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.076963] ACPI: Power Button [PWRF]
[ 3.095118] ACPI: Invalid PBLK length [0]
-------------- next part --------------
# This image was built using git revision bdca15337bc9337f399b43290dc74cb598c5ec4d
CONFIG_LOCALVERSION=""
CONFIG_CBFS_PREFIX="fallback"
CONFIG_COMPILER_GCC=y
CONFIG_USE_OPTION_TABLE=y
CONFIG_COMPRESS_RAMSTAGE=y
CONFIG_INCLUDE_CONFIG_FILE=y
CONFIG_USE_BLOBS=y
CONFIG_VENDOR_ASROCK=y
CONFIG_BOARD_SPECIFIC_OPTIONS=y
CONFIG_MAINBOARD_DIR="asrock/e350m1"
CONFIG_MAINBOARD_PART_NUMBER="E350M1"
CONFIG_IRQ_SLOT_COUNT=11
CONFIG_MAINBOARD_VENDOR="ASROCK"
CONFIG_APIC_ID_OFFSET=0x0
CONFIG_HW_MEM_HOLE_SIZEK=0x200000
CONFIG_MAX_CPUS=2
CONFIG_MAX_PHYSICAL_CPUS=1
CONFIG_MEM_TRAIN_SEQ=2
CONFIG_RAMTOP=0x1000000
CONFIG_HEAP_SIZE=0xc0000
CONFIG_RAMBASE=0x200000
CONFIG_VGA_BIOS_ID="1002,9802"
CONFIG_STACK_SIZE=0x10000
CONFIG_ACPI_SSDTX_NUM=0
CONFIG_SIO_PORT=0x2e
CONFIG_VGA_BIOS=y
CONFIG_PCI_ROM_RUN=y
CONFIG_UDELAY_IO=y
CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x0
CONFIG_SERIAL_CPU_INIT=y
CONFIG_VGA_BIOS_FILE="/home/magherus/devel/coreboot/extract/pci1002,9802.rom"
CONFIG_BOARD_ASROCK_E350M1=y
CONFIG_MMCONF_BASE_ADDRESS=0xf8000000
CONFIG_BOOTBLOCK_SOUTHBRIDGE_INIT="southbridge/amd/cimx/sb800/bootblock.c"
CONFIG_GENERATE_PIRQ_TABLE=y
CONFIG_LOGICAL_CPUS=y
CONFIG_IOAPIC=y
CONFIG_SMP=y
CONFIG_TTYS0_BAUD=115200
CONFIG_TTYS0_BASE=0x3f8
CONFIG_TTYS0_LCS=3
CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
CONFIG_CONSOLE_SERIAL8250=y
CONFIG_VAR_MTRR_HOLE=y
CONFIG_LIFT_BSP_APIC_ID=y
CONFIG_BOARD_ROMSIZE_KB_4096=y
CONFIG_COREBOOT_ROMSIZE_KB_4096=y
CONFIG_COREBOOT_ROMSIZE_KB=4096
CONFIG_ROM_SIZE=0x400000
CONFIG_CACHE_ROM_SIZE=0x400000
CONFIG_ARCH_X86=y
CONFIG_MAX_REBOOT_CNT=3
CONFIG_X86_BOOTBLOCK_SIMPLE=y
CONFIG_BOOTBLOCK_SOURCE="bootblock_simple.c"
CONFIG_PC80_SYSTEM=y
CONFIG_HAVE_ARCH_MEMSET=y
CONFIG_HAVE_ARCH_MEMCPY=y
CONFIG_LITTLE_ENDIAN=y
CONFIG_IOAPIC_INTERRUPTS_ON_FSB=y
CONFIG_CPU_ADDR_BITS=36
CONFIG_CPU_SOCKET_TYPE=0x10
CONFIG_CBB=0x0
CONFIG_CDB=0x18
CONFIG_XIP_ROM_SIZE=0x100000
CONFIG_DIMM_SUPPORT=0x0104
CONFIG_CPU_AMD_AGESA=y
CONFIG_HAVE_INIT_TIMER=y
CONFIG_CPU_AMD_AGESA_FAMILY14=y
CONFIG_HIGH_SCRATCH_MEMORY_SIZE=0x71000
CONFIG_SMM_TSEG_SIZE=0
CONFIG_CACHE_AS_RAM=y
CONFIG_AP_SIPI_VECTOR=0xfffff000
CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=y
CONFIG_VIDEO_MB=0
CONFIG_AMDMCT=y
CONFIG_MMCONF_BUS_NUMBER=16
CONFIG_NORTHBRIDGE_AMD_AGESA=y
CONFIG_NORTHBRIDGE_AMD_AGESA_FAMILY14=y
CONFIG_AMD_SB_CIMX=y
CONFIG_SOUTHBRIDGE_AMD_CIMX_SB800=y
CONFIG_IDE_COMBINED_MODE=0x1
CONFIG_SB800_SATA_IDE=y
CONFIG_SB800_SATA_MODE=0x0
CONFIG_SB_SUPERIO_HWM=y
CONFIG_SUPERIO_WINBOND_W83627HF=y
CONFIG_VGA_BRIDGE_SETUP=y
CONFIG_VGA_ROM_RUN=y
CONFIG_ON_DEVICE_ROM_RUN=y
CONFIG_PCI_OPTION_ROM_RUN_REALMODE=y
CONFIG_PCIX_PLUGIN_SUPPORT=y
CONFIG_PCIEXP_PLUGIN_SUPPORT=y
CONFIG_AGP_PLUGIN_SUPPORT=y
CONFIG_CARDBUS_PLUGIN_SUPPORT=y
CONFIG_PCIEXP_COMMON_CLOCK=y
CONFIG_PCIEXP_ASPM=y
CONFIG_PCI_BUS_SEGN_BITS=0
CONFIG_MMCONF_SUPPORT=y
CONFIG_CONSOLE_SERIAL_COM1=y
CONFIG_CONSOLE_SERIAL_115200=y
CONFIG_MAXIMUM_CONSOLE_LOGLEVEL_8=y
CONFIG_DEFAULT_CONSOLE_LOGLEVEL_8=y
CONFIG_POST_PORT=0x80
CONFIG_HAVE_UART_IO_MAPPED=y
CONFIG_HAVE_HARD_RESET=y
CONFIG_HAVE_MAINBOARD_RESOURCES=y
CONFIG_HAVE_OPTION_TABLE=y
CONFIG_PCI_IO_CFG_EXT=y
CONFIG_GFXUMA=y
CONFIG_HAVE_ACPI_TABLES=y
CONFIG_HAVE_MP_TABLE=y
CONFIG_HAVE_PIRQ_TABLE=y
CONFIG_GENERATE_ACPI_TABLES=y
CONFIG_GENERATE_MP_TABLE=y
CONFIG_GENERATE_SMBIOS_TABLES=y
CONFIG_WRITE_HIGH_TABLES=y
CONFIG_MULTIBOOT=y
CONFIG_PAYLOAD_SEABIOS=y
CONFIG_SEABIOS_STABLE=y
CONFIG_PAYLOAD_FILE="$(obj)/seabios/out/bios.bin.elf"
CONFIG_COMPRESSED_PAYLOAD_LZMA=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_117=y
CONFIG_FRAMEBUFFER_VESA_MODE=0x117
CONFIG_FRAMEBUFFER_KEEP_VESA_MODE=y
CONFIG_BOOTSPLASH=y
CONFIG_BOOTSPLASH_FILE="/home/magherus/devel/coreboot/extract/bootsplash.jpg"
CONFIG_GDB_STUB=y
CONFIG_DEBUG_ACPI=y
CONFIG_HAVE_BUS_CONFIG=y
CONFIG_ID_SECTION_OFFSET=0x80
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20120702/a2b154fc/attachment.sig>
More information about the coreboot
mailing list