[coreboot] ASRock 775i65G (Intel 865g): log files
Paul Menzel
paulepanter at users.sourceforge.net
Wed Jan 18 15:29:11 CET 2012
Dear coreboot folks,
I got the ASRock 775i65G [1] which has an Intel 865 chipset which is not
yet supported by coreboot. Idwer is trying to port coreboot to the 856
chipset though and as a possible target and for the archive, here are
the log files.
For the record, this board seems to have problems so that the MOSFET ()
on the one corner looks burned [2]. In contrast to the person from the
forum post [2] my board still boots. The MOSFET on my board has the part
number APM038N WI7DS and the board in the forum APM2030N WI8BW. Peter
wrote it would be possible to replace it. Proper MOSFET can be bought at
Ebay [3][4].
Thanks,
Paul
[1] http://www.asrock.com/MB/overview.asp?Model=775i65G
[2] http://forums.ncix.com/forums/topic.php?id=2371121
[3] http://www.ebay.de/itm/270747024710
[4] http://www.ebay.de/itm/250708848592
-------------- next part --------------
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Pentium(R) 4 CPU 3.00GHz
stepping : 9
cpu MHz : 2999.275
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl cid cx16 xtpr lahf_lm
bogomips : 5998.55
clflush size : 64
cache_alignment : 128
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Pentium(R) 4 CPU 3.00GHz
stepping : 9
cpu MHz : 2999.275
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 1
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl cid cx16 xtpr lahf_lm
bogomips : 5999.73
clflush size : 64
cache_alignment : 128
address sizes : 36 bits physical, 48 bits virtual
power management:
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0-3-grml-amd64 (Debian 3.1.0-3+grml.1) (ch at grml.org) (gcc version 4.6.2 (Debian 4.6.2-9) ) #1 SMP Wed Dec 21 23:56:26 UTC 2011
[ 0.000000] Command line: initrd=/boot/grml64/initrd.img boot=live live-media-path=/live/grml64/ bootid=grml64201112 apm=power-off vga=791 nomce toram=grml64.squashfs ssh BOOT_IMAGE=/boot/grml64/vmlinuz
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f740000 (usable)
[ 0.000000] BIOS-e820: 000000007f740000 - 000000007f750000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f750000 - 000000007f800000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./775i65G., BIOS P2.70 09/05/2006
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7f740 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000007f740000
[ 0.000000] 0000000000 - 007f600000 page 2M
[ 0.000000] 007f600000 - 007f740000 page 4k
[ 0.000000] kernel direct mapping tables up to 7f740000 @ 1fffc000-20000000
[ 0.000000] RAMDISK: 7ed05000 - 7f71e000
[ 0.000000] ACPI: RSDP 00000000000fa6d0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000007f740000 00030 (v01 A M I OEMRSDT 09000605 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007f740200 00081 (v02 A M I OEMFACP 09000605 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007f740370 03916 (v01 75i6G 75i6G263 00000263 INTL 02002026)
[ 0.000000] ACPI: FACS 000000007f750000 00040
[ 0.000000] ACPI: APIC 000000007f740300 0006C (v01 A M I OEMAPIC 09000605 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007f750040 0003F (v01 A M I OEMBIOS 09000605 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007f740000
[ 0.000000] Initmem setup node 0 0000000000000000-000000007f740000
[ 0.000000] NODE_DATA [000000007f73b000 - 000000007f73ffff]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007c400000-ffff88007dffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f740
[ 0.000000] On node 0 totalpages: 521935
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7082 pages used for memmap
[ 0.000000] DMA32 zone: 510870 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7f800000 (gap: 7f800000:7f500000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007ea00000 s80768 r8192 d21632 u524288
[ 0.000000] pcpu-alloc: s80768 r8192 d21632 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 514792
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: initrd=/boot/grml64/initrd.img boot=live live-media-path=/live/grml64/ bootid=grml64201112 apm=power-off vga=791 nomce toram=grml64.squashfs ssh BOOT_IMAGE=/boot/grml64/vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2039796k/2088192k available (3409k kernel code, 452k absent, 47944k reserved, 3314k data, 572k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2999.345 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 5998.69 BogoMIPS (lpj=11997380)
[ 0.004017] pid_max: default: 32768 minimum: 301
[ 0.004103] Security Framework initialized
[ 0.004604] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.006114] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.006793] Mount-cache hash table entries: 256
[ 0.007030] Initializing cgroup subsys cpuacct
[ 0.007042] Initializing cgroup subsys memory
[ 0.008020] Initializing cgroup subsys devices
[ 0.008027] Initializing cgroup subsys freezer
[ 0.008032] Initializing cgroup subsys net_cls
[ 0.008039] Initializing cgroup subsys blkio
[ 0.008107] CPU: Physical Processor ID: 0
[ 0.008111] CPU: Processor Core ID: 0
[ 0.008117] using mwait in idle threads.
[ 0.008871] ACPI: Core revision 20110623
[ 0.016388] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056241] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
[ 0.060003] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.060003] ... version: 0
[ 0.060003] ... bit width: 40
[ 0.060003] ... generic registers: 18
[ 0.060003] ... value mask: 000000ffffffffff
[ 0.060003] ... max period: 0000007fffffffff
[ 0.060003] ... fixed-purpose events: 0
[ 0.060003] ... event mask: 000000000003ffff
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] Booting Node 0, Processors #1
[ 0.060003] smpboot cpu 1: start_ip = 9a000
[ 0.148056] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.148120] Brought up 2 CPUs
[ 0.148130] Total of 2 processors activated (11998.52 BogoMIPS).
[ 0.148883] devtmpfs: initialized
[ 0.152624] PM: Registering ACPI NVS region at 7f750000 (720896 bytes)
[ 0.152624] print_constraints: dummy:
[ 0.152624] NET: Registered protocol family 16
[ 0.152632] ACPI: bus type pci registered
[ 0.152738] PCI: Using configuration type 1 for base access
[ 0.153513] bio: create slab <bio-0> at 0
[ 0.153513] ACPI: Added _OSI(Module Device)
[ 0.153513] ACPI: Added _OSI(Processor Device)
[ 0.153513] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.153513] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.153513] ACPI: EC: Look up EC in DSDT
[ 0.157364] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.160556] ACPI Error: Method parse/execution failed [\_PR_.CPU1._PDC] (Node ffff88007b75fd58), AE_INVALID_TABLE_LENGTH (20110623/psparse-536)
[ 0.160682] ACPI Error: Method parse/execution failed [\_PR_.CPU2._PDC] (Node ffff88007b75fc18), AE_INVALID_TABLE_LENGTH (20110623/psparse-536)
[ 0.161340] ACPI: Interpreter enabled
[ 0.161349] ACPI: (supports S0 S1 S4 S5)
[ 0.161395] ACPI: Using IOAPIC for interrupt routing
[ 0.172178] ACPI: No dock devices found.
[ 0.172185] HEST: Table not found.
[ 0.172192] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.172318] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.172577] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.172582] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.172586] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.172590] pci_root PNP0A03:00: host bridge window [mem 0x7f800000-0xffefffff] (ignored)
[ 0.172607] pci 0000:00:00.0: [8086:2570] type 0 class 0x000600
[ 0.172612] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[ 0.172625] pci 0000:00:00.0: reg 10: [mem 0xfe800000-0xfebfffff pref]
[ 0.172688] pci 0000:00:02.0: [8086:2572] type 0 class 0x000300
[ 0.172704] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.172713] pci 0000:00:02.0: reg 14: [mem 0xff280000-0xff2fffff]
[ 0.172722] pci 0000:00:02.0: reg 18: [io 0xec00-0xec07]
[ 0.172780] pci 0000:00:06.0: [8086:2576] type 0 class 0x000880
[ 0.172792] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff]
[ 0.172875] pci 0000:00:1d.0: [8086:24d2] type 0 class 0x000c03
[ 0.172921] pci 0000:00:1d.0: reg 20: [io 0xdc00-0xdc1f]
[ 0.172960] pci 0000:00:1d.1: [8086:24d4] type 0 class 0x000c03
[ 0.173006] pci 0000:00:1d.1: reg 20: [io 0xe000-0xe01f]
[ 0.173044] pci 0000:00:1d.2: [8086:24d7] type 0 class 0x000c03
[ 0.173091] pci 0000:00:1d.2: reg 20: [io 0xe400-0xe41f]
[ 0.173128] pci 0000:00:1d.3: [8086:24de] type 0 class 0x000c03
[ 0.173174] pci 0000:00:1d.3: reg 20: [io 0xe800-0xe81f]
[ 0.173223] pci 0000:00:1d.7: [8086:24dd] type 0 class 0x000c03
[ 0.173247] pci 0000:00:1d.7: reg 10: [mem 0xff27fc00-0xff27ffff]
[ 0.173330] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.173336] pci 0000:00:1d.7: PME# disabled
[ 0.173362] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.173411] pci 0000:00:1f.0: [8086:24d0] type 0 class 0x000601
[ 0.173479] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.173507] pci 0000:00:1f.1: [8086:24db] type 0 class 0x000101
[ 0.173523] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.173534] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.173545] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.173555] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.173566] pci 0000:00:1f.1: reg 20: [io 0xfc00-0xfc0f]
[ 0.173577] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[ 0.173610] pci 0000:00:1f.3: [8086:24d3] type 0 class 0x000c05
[ 0.173657] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.173699] pci 0000:00:1f.5: [8086:24d5] type 0 class 0x000401
[ 0.173716] pci 0000:00:1f.5: reg 10: [io 0xd800-0xd8ff]
[ 0.173726] pci 0000:00:1f.5: reg 14: [io 0xd400-0xd43f]
[ 0.173736] pci 0000:00:1f.5: reg 18: [mem 0xff27f800-0xff27f9ff]
[ 0.173747] pci 0000:00:1f.5: reg 1c: [mem 0xff27f400-0xff27f4ff]
[ 0.173787] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.173792] pci 0000:00:1f.5: PME# disabled
[ 0.173834] pci 0000:01:05.0: [10ec:8139] type 0 class 0x000200
[ 0.173852] pci 0000:01:05.0: reg 10: [io 0xb800-0xb8ff]
[ 0.173863] pci 0000:01:05.0: reg 14: [mem 0xff0ffc00-0xff0ffcff]
[ 0.173919] pci 0000:01:05.0: supports D1 D2
[ 0.173922] pci 0000:01:05.0: PME# supported from D1 D2 D3hot D3cold
[ 0.173927] pci 0000:01:05.0: PME# disabled
[ 0.173966] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.173976] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 0.173982] pci 0000:00:1e.0: bridge window [mem 0xff000000-0xff0fffff]
[ 0.173989] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.173993] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.174007] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.174172] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.174456] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.178725] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.178835] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.178940] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.179047] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.179155] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.179263] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.179372] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.179479] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.179626] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.179626] vgaarb: loaded
[ 0.179626] vgaarb: bridge control possible 0000:00:02.0
[ 0.179626] PCI: Using ACPI for IRQ routing
[ 0.179626] PCI: pci_cache_line_size set to 64 bytes
[ 0.179626] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.179626] reserve RAM buffer: 000000007f740000 - 000000007fffffff
[ 0.180161] hpet clockevent registered
[ 0.180167] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.180175] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.180185] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.184049] Switching to clocksource hpet
[ 0.187615] pnp: PnP ACPI init
[ 0.187651] ACPI: bus type pnp registered
[ 0.187806] Switched to NOHz mode on CPU #0
[ 0.187829] pnp 00:00: [bus 00-ff]
[ 0.187834] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.187837] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.187841] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.187844] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.187848] pnp 00:00: [mem 0x00000000 window]
[ 0.187851] pnp 00:00: [mem 0x7f800000-0xffefffff window]
[ 0.187916] Switched to NOHz mode on CPU #1
[ 0.187940] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.188032] pnp 00:01: [dma 4]
[ 0.188036] pnp 00:01: [io 0x0000-0x000f]
[ 0.188039] pnp 00:01: [io 0x0081-0x0083]
[ 0.188042] pnp 00:01: [io 0x0087]
[ 0.188045] pnp 00:01: [io 0x0089-0x008b]
[ 0.188047] pnp 00:01: [io 0x008f]
[ 0.188050] pnp 00:01: [io 0x00c0-0x00df]
[ 0.188101] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.188128] pnp 00:02: [io 0x0070-0x0071]
[ 0.188144] pnp 00:02: [irq 8]
[ 0.188196] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.188217] pnp 00:03: [io 0x0061]
[ 0.188266] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.188287] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.188295] pnp 00:04: [irq 13]
[ 0.188344] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.188934] pnp 00:05: [io 0x02f8-0x02ff]
[ 0.188946] pnp 00:05: [irq 3]
[ 0.188950] pnp 00:05: [dma 0 disabled]
[ 0.189109] pnp 00:05: Plug and Play ACPI device, IDs PNP0510 (active)
[ 0.189760] pnp 00:06: [io 0x03f0-0x03f5]
[ 0.189764] pnp 00:06: [io 0x03f7]
[ 0.189772] pnp 00:06: [irq 6]
[ 0.189776] pnp 00:06: [dma 2]
[ 0.189871] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.190532] pnp 00:07: [io 0x0378-0x037f]
[ 0.190536] pnp 00:07: [io 0x0778-0x077b]
[ 0.190544] pnp 00:07: [irq 7]
[ 0.190548] pnp 00:07: [dma 3]
[ 0.190862] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.191023] pnp 00:08: [io 0x0010-0x001f]
[ 0.191027] pnp 00:08: [io 0x0022-0x003f]
[ 0.191031] pnp 00:08: [io 0x0044-0x005f]
[ 0.191034] pnp 00:08: [io 0x0062-0x0063]
[ 0.191037] pnp 00:08: [io 0x0065-0x006f]
[ 0.191040] pnp 00:08: [io 0x0072-0x007f]
[ 0.191043] pnp 00:08: [io 0x0080]
[ 0.191046] pnp 00:08: [io 0x0084-0x0086]
[ 0.191048] pnp 00:08: [io 0x0088]
[ 0.191051] pnp 00:08: [io 0x008c-0x008e]
[ 0.191054] pnp 00:08: [io 0x0090-0x009f]
[ 0.191057] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.191060] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.191064] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.191067] pnp 00:08: [io 0x0800-0x087f]
[ 0.191070] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.191073] pnp 00:08: [io 0x0480-0x04bf]
[ 0.191076] pnp 00:08: [io 0x0900-0x090f]
[ 0.191080] pnp 00:08: [mem 0xfed20000-0xfed8ffff]
[ 0.191083] pnp 00:08: [mem 0xff380000-0xffefffff]
[ 0.191183] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.191191] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.191198] system 00:08: [io 0x0480-0x04bf] has been reserved
[ 0.191204] system 00:08: [io 0x0900-0x090f] has been reserved
[ 0.191211] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.191218] system 00:08: [mem 0xff380000-0xffefffff] has been reserved
[ 0.191226] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.191334] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.191338] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.191415] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.191424] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.191430] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.192103] pnp 00:0a: [io 0x03f8-0x03ff]
[ 0.192113] pnp 00:0a: [irq 4]
[ 0.192116] pnp 00:0a: [dma 0 disabled]
[ 0.192247] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.192378] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
[ 0.192382] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
[ 0.192386] pnp 00:0b: [io 0x0290-0x029f]
[ 0.192466] system 00:0b: [io 0x0290-0x029f] has been reserved
[ 0.192474] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.192757] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.192761] pnp 00:0c: [mem 0x000c0000-0x000dffff]
[ 0.192764] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.192767] pnp 00:0c: [mem 0x00100000-0x7f7fffff]
[ 0.192770] pnp 00:0c: [mem 0xfff00000-0xffffffff]
[ 0.192851] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.192860] system 00:0c: [mem 0x000c0000-0x000dffff] could not be reserved
[ 0.192867] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.192873] system 00:0c: [mem 0x00100000-0x7f7fffff] could not be reserved
[ 0.192880] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.192887] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.193203] pnp: PnP ACPI: found 13 devices
[ 0.193208] ACPI: ACPI bus type pnp unregistered
[ 0.202627] PCI: max bus depth: 1 pci_try_num: 2
[ 0.202650] pci 0000:00:1f.1: BAR 5: assigned [mem 0x80000000-0x800003ff]
[ 0.202662] pci 0000:00:1f.1: BAR 5: set to [mem 0x80000000-0x800003ff] (PCI address [0x80000000-0x800003ff])
[ 0.202670] pci 0000:00:1e.0: PCI bridge to [bus 01-01]
[ 0.202677] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 0.202685] pci 0000:00:1e.0: bridge window [mem 0xff000000-0xff0fffff]
[ 0.202708] pci 0000:00:1e.0: setting latency timer to 64
[ 0.202714] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.202717] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.202721] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.202724] pci_bus 0000:01: resource 1 [mem 0xff000000-0xff0fffff]
[ 0.202728] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.202731] pci_bus 0000:01: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.202832] NET: Registered protocol family 2
[ 0.203058] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.204529] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.207250] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.207893] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.207901] TCP reno registered
[ 0.207931] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.207967] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.208231] NET: Registered protocol family 1
[ 0.208266] pci 0000:00:02.0: Boot video device
[ 0.208378] PCI: CLS 0 bytes, default 64
[ 0.208462] Unpacking initramfs...
[ 2.344274] Freeing initrd memory: 10340k freed
[ 2.351482] audit: initializing netlink socket (disabled)
[ 2.351514] type=2000 audit(1326818609.344:1): initialized
[ 2.375425] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.388051] VFS: Disk quotas dquot_6.5.2
[ 2.388113] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.388202] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.388329] aufs 3.1-20111031
[ 2.388340] msgmni has been set to 4004
[ 2.388663] alg: No test for stdrng (krng)
[ 2.388727] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.388737] io scheduler noop registered
[ 2.388741] io scheduler deadline registered
[ 2.388766] io scheduler cfq registered (default)
[ 2.389039] vesafb: mode is 1024x768x16, linelength=2048, pages=4
[ 2.389046] vesafb: scrolling: redraw
[ 2.389051] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 2.389390] vesafb: framebuffer at 0xf0000000, mapped to 0xffffc90000900000, using 3072k, total 8000k
[ 2.409808] Console: switching to colour frame buffer device 128x48
[ 2.429069] fb0: VESA VGA frame buffer device
[ 2.429304] ERST: Table is not found!
[ 2.429446] GHES: HEST is not enabled!
[ 2.429711] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.450295] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.480315] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.516565] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.528208] Linux agpgart interface v0.103
[ 2.528445] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[ 2.528677] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable
[ 2.529344] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 2.529791] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[ 2.530237] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.533288] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.533490] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.533941] mousedev: PS/2 mouse device common for all mice
[ 2.534225] rtc_cmos 00:02: RTC can wake from S4
[ 2.534553] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.534813] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 2.541754] cpuidle: using governor ladder
[ 2.548610] cpuidle: using governor menu
[ 2.555796] TCP cubic registered
[ 2.563005] NET: Registered protocol family 10
[ 2.570399] Mobile IPv6
[ 2.576960] NET: Registered protocol family 17
[ 2.583617] Registering the dns_resolver key type
[ 2.590439] PM: Hibernation image not present or could not be loaded.
[ 2.590460] registered taskstats version 1
[ 2.603592] rtc_cmos 00:02: setting system clock to 2012-01-17 16:43:29 UTC (1326818609)
[ 2.610331] Initializing network drop monitor service
[ 2.618720] Freeing unused kernel memory: 572k freed
[ 2.625607] Write protecting the kernel read-only data: 6144k
[ 2.636085] Freeing unused kernel memory: 668k freed
[ 2.646595] Freeing unused kernel memory: 620k freed
[ 2.781140] udevd[56]: starting version 175
[ 2.846718] usbcore: registered new interface driver usbfs
[ 2.846779] usbcore: registered new interface driver hub
[ 2.859285] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.859320] 8139cp 0000:01:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 2.860190] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 2.860269] 8139too 0000:01:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.863890] usbcore: registered new device driver usb
[ 2.865233] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.865305] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 2.865339] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.865348] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.865400] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.865452] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.867586] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 2.867600] ACPI: Power Button [PWRB]
[ 2.867740] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.867748] ACPI: Power Button [PWRF]
[ 2.869345] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 2.871004] SCSI subsystem initialized
[ 2.886703] 8139too 0000:01:05.0: eth0: RealTek RTL8139 at 0xffffc900008b0c00, 00:13:8f:e5:6a:40, IRQ 22
[ 2.887353] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff27fc00
[ 2.900890] [drm] Initialized drm 1.1.0 20060810
[ 2.902544] libata version 3.00 loaded.
[ 2.904456] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.904548] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.904555] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.904561] usb usb1: Product: EHCI Host Controller
[ 2.904565] usb usb1: Manufacturer: Linux 3.1.0-3-grml-amd64 ehci_hcd
[ 2.904570] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.905823] hub 1-0:1.0: USB hub found
[ 2.905836] hub 1-0:1.0: 8 ports detected
[ 2.907194] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.907300] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.907320] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.907327] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.907353] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.907409] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000dc00
[ 2.907480] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.907486] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.907491] usb usb2: Product: UHCI Host Controller
[ 2.907494] usb usb2: Manufacturer: Linux 3.1.0-3-grml-amd64 uhci_hcd
[ 2.907499] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.920273] hub 2-0:1.0: USB hub found
[ 2.920288] hub 2-0:1.0: 2 ports detected
[ 2.920459] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.920475] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.920481] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.920499] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.920552] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
[ 2.920624] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.920630] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.920635] usb usb3: Product: UHCI Host Controller
[ 2.920638] usb usb3: Manufacturer: Linux 3.1.0-3-grml-amd64 uhci_hcd
[ 2.920643] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.931605] hub 3-0:1.0: USB hub found
[ 2.931620] hub 3-0:1.0: 2 ports detected
[ 2.931802] ata_piix 0000:00:1f.1: version 2.13
[ 2.931848] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.931920] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.935324] scsi0 : ata_piix
[ 2.936984] scsi1 : ata_piix
[ 2.938816] Floppy drive(s): fd0 is 1.44M
[ 2.941076] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 2.941086] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 2.943871] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.943891] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.943898] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.943931] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.943993] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
[ 2.944103] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.944109] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.944114] usb usb4: Product: UHCI Host Controller
[ 2.944119] usb usb4: Manufacturer: Linux 3.1.0-3-grml-amd64 uhci_hcd
[ 2.944123] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.944399] hub 4-0:1.0: USB hub found
[ 2.944412] hub 4-0:1.0: 2 ports detected
[ 2.944576] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.944593] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.944600] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.944629] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.944670] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e800
[ 2.944747] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.944754] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.944759] usb usb5: Product: UHCI Host Controller
[ 2.944763] usb usb5: Manufacturer: Linux 3.1.0-3-grml-amd64 uhci_hcd
[ 2.944768] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.945028] hub 5-0:1.0: USB hub found
[ 2.945040] hub 5-0:1.0: 2 ports detected
[ 2.945263] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.945273] i915 0000:00:02.0: setting latency timer to 64
[ 2.969806] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.969813] [drm] Driver supports precise vblank timestamp query.
[ 2.970422] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.972129] FDC 0 is a post-1991 82077
[ 2.996945] [drm] initialized overlay support
[ 3.117719] checking generic (f0000000 7d0000) vs hw (f0000000 8000000)
[ 3.117724] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 3.117750] Console: switching to colour dummy device 80x25
[ 3.118343] fbcon: inteldrmfb (fb0) is primary device
[ 3.152531] Console: switching to colour frame buffer device 160x64
[ 3.158305] fb0: inteldrmfb frame buffer device
[ 3.158308] drm: registered panic notifier
[ 3.158344] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.266070] device-mapper: uevent: version 1.0.3
[ 3.266233] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel at redhat.com
[ 3.272057] usb 1-4: new high speed USB device number 3 using ehci_hcd
[ 3.310852] Uniform Multi-Platform E-IDE driver
[ 3.311341] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 3.348034] Refined TSC clocksource calibration: 2999.659 MHz.
[ 3.348043] Switching to clocksource tsc
[ 3.492059] usb 1-4: New USB device found, idVendor=058f, idProduct=6387
[ 3.492064] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.492068] usb 1-4: Product: Mass Storage
[ 3.492071] usb 1-4: Manufacturer: Generic
[ 3.492074] usb 1-4: SerialNumber: 2E19D9AC
[ 3.495890] usbcore: registered new interface driver uas
[ 3.497719] Initializing USB Mass Storage driver...
[ 3.498101] scsi2 : usb-storage 1-4:1.0
[ 3.498297] usbcore: registered new interface driver usb-storage
[ 3.498303] USB Mass Storage support registered.
[ 3.732019] usb 2-1: new low speed USB device number 2 using uhci_hcd
[ 3.911297] usb 2-1: New USB device found, idVendor=046d, idProduct=c30f
[ 3.911303] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.911307] usb 2-1: Product: Logitech USB Keyboard
[ 3.911309] usb 2-1: Manufacturer: Logitech
[ 3.936650] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
[ 3.936811] generic-usb 0003:046D:C30F.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-1/input0
[ 3.970389] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input3
[ 3.970511] generic-usb 0003:046D:C30F.0002: input,hidraw1: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-1/input1
[ 3.970551] usbcore: registered new interface driver usbhid
[ 3.970555] usbhid: USB HID core driver
[ 4.498054] scsi 2:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 2
[ 4.504408] sd 2:0:0:0: [sda] 4100096 512-byte logical blocks: (2.09 GB/1.95 GiB)
[ 4.504900] sd 2:0:0:0: [sda] Write Protect is off
[ 4.504905] sd 2:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 4.505400] sd 2:0:0:0: [sda] No Caching mode page present
[ 4.505403] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 4.507899] sd 2:0:0:0: [sda] No Caching mode page present
[ 4.507904] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 4.546927] sda: sda4
[ 4.549019] sd 2:0:0:0: [sda] No Caching mode page present
[ 4.549024] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 4.549028] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 5.451241] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 5.454866] ISO 9660 Extensions: RRIP_1991A
[ 27.190876] loop: module loaded
[ 27.311631] loop0: unknown partition table
[ 29.851125] udevd[658]: starting version 175
[ 30.078713] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 30.125797] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 30.182401] ACPI: acpi_idle registered with cpuidle
[ 30.465170] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 30.535154] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 30.665947] intel_rng: FWH not detected
[ 30.681734] parport_pc 00:07: reported by Plug and Play ACPI
[ 30.681793] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 30.789812] iTCO_vendor_support: vendor-support=0
[ 30.791576] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 30.793242] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
[ 30.793987] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 31.255508] snd_intel8x0 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 31.255570] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
[ 31.584473] intel8x0_measure_ac97_clock: measured 52973 usecs (2553 samples)
[ 31.584481] intel8x0: clocking to 48000
[ 33.449207] RPC: Registered named UNIX socket transport module.
[ 33.449214] RPC: Registered udp transport module.
[ 33.449220] RPC: Registered tcp transport module.
[ 33.449224] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 33.512544] 8139too 0000:01:05.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 33.542259] FS-Cache: Loaded
[ 33.605886] FS-Cache: Netfs 'nfs' registered for caching
[ 33.629982] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 36.402715] fuse init (API version 7.17)
[ 36.454036] ipmi message handler version 39.2
[ 43.712016] eth0: no IPv6 routers present
[ 49.748490] end_request: I/O error, dev fd0, sector 0
[ 402.938456] ------------[ cut here ]------------
[ 402.938478] WARNING: at /tmp/buildd/linux-2.6-3.1.0/debian/build/source_amd64_none/fs/aufs/plink.c:418 au_plink_append+0xf9/0x1fb()
[ 402.938485] Hardware name: To Be Filled By O.E.M.
[ 402.938489] unexpectedly many pseudo links, 101
[ 402.938493] Modules linked in: mperf cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_conservative thermal sbs sbshc pci_slot fan container battery acpi_memhotplug acpi_ipmi ipmi_msghandler ac power_supply fuse md_mod configfs nfsd nfs lockd fscache auth_rpcgss nfs_acl sunrpc snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq snd_timer snd_seq_device iTCO_wdt iTCO_vendor_support snd psmouse parport_pc serio_raw evdev parport pcspkr shpchp rng_core processor soundcore i2c_i801 pci_hotplug snd_page_alloc loop nls_utf8 isofs sd_mod crc_t10dif usbhid hid usb_storage uas ide_generic ide_core dm_mirror dm_region_hash dm_log dm_mod ata_generic i915 floppy uhci_hcd ata_piix drm_kms_helper drm libata i2c_algo_bit ehci_hcd 8139too 8139cp mii scsi_mod button usbcore i2c_core video thermal_sys [last unloaded: scsi_wait_scan]
[ 402.938616] Pid: 3957, comm: dpkg Not tainted 3.1.0-3-grml-amd64 #1
[ 402.938619] Call Trace:
[ 402.938628] [<ffffffff810458b5>] ? warn_slowpath_common+0x78/0x8c
[ 402.938633] [<ffffffff81045961>] ? warn_slowpath_fmt+0x45/0x4a
[ 402.938638] [<ffffffff81168954>] ? au_plink_append+0xf9/0x1fb
[ 402.938642] [<ffffffff81165509>] ? aufs_link+0x401/0x78b
[ 402.938649] [<ffffffff810354cb>] ? should_resched+0x5/0x23
[ 402.938655] [<ffffffff810fe181>] ? vfs_link+0xbf/0x10a
[ 402.938660] [<ffffffff810ffd8b>] ? sys_linkat+0xee/0x13a
[ 402.938667] [<ffffffff8134fd92>] ? system_call_fastpath+0x16/0x1b
[ 402.938671] ---[ end trace 2616e4ed95efbdff ]---
[ 627.859494] parport_pc 00:07: disabled
[ 627.878172] parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
[ 627.878182] parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
[ 627.878186] parport 0x378: You gave this address, but there is probably no parallel port there!
[ 627.878209] parport0: PC-style at 0x378 [PCSPP,TRISTATE]
[ 628.053719] hwinfo[5901]: segfault at 0 ip 00007fa8342c41e1 sp 00007fff98dbcbd0 error 4 in libhd.so.16.0[7fa834297000+bb000]
[ 704.773973] w83627ehf: Found W83627EHG chip at 0x290
[ 704.774542] w83627ehf w83627ehf.656: Setting VID input voltage to VRM10
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0-3-grml-amd64 (Debian 3.1.0-3+grml.1) (ch at grml.org) (gcc version 4.6.2 (Debian 4.6.2-9) ) #1 SMP Wed Dec 21 23:56:26 UTC 2011
[ 0.000000] Command line: initrd=/boot/grml64/initrd.img boot=live live-media-path=/live/grml64/ bootid=grml64201112 apm=power-off vga=791 nomce toram=grml64.squashfs ssh BOOT_IMAGE=/boot/grml64/vmlinuz
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f740000 (usable)
[ 0.000000] BIOS-e820: 000000007f740000 - 000000007f750000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f750000 - 000000007f800000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./775i65G., BIOS P3.30 12/01/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7f740 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000007f740000
[ 0.000000] 0000000000 - 007f600000 page 2M
[ 0.000000] 007f600000 - 007f740000 page 4k
[ 0.000000] kernel direct mapping tables up to 7f740000 @ 1fffc000-20000000
[ 0.000000] RAMDISK: 7ed05000 - 7f71e000
[ 0.000000] ACPI: RSDP 00000000000fac00 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000007f740000 00030 (v01 A_M_I OEMRSDT 12000901 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007f740200 00081 (v02 A_M_I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007f740370 036A9 (v01 75i6G 75i6G322 00000322 INTL 02002026)
[ 0.000000] ACPI: FACS 000000007f750000 00040
[ 0.000000] ACPI: APIC 000000007f740300 0006C (v01 A_M_I OEMAPIC 12000901 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007f750040 0003F (v01 A_M_I OEMBIOS 12000901 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007f740000
[ 0.000000] Initmem setup node 0 0000000000000000-000000007f740000
[ 0.000000] NODE_DATA [000000007f73b000 - 000000007f73ffff]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007c400000-ffff88007dffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f740
[ 0.000000] On node 0 totalpages: 521935
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7082 pages used for memmap
[ 0.000000] DMA32 zone: 510870 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7f800000 (gap: 7f800000:7f500000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007ea00000 s80768 r8192 d21632 u524288
[ 0.000000] pcpu-alloc: s80768 r8192 d21632 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 514792
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: initrd=/boot/grml64/initrd.img boot=live live-media-path=/live/grml64/ bootid=grml64201112 apm=power-off vga=791 nomce toram=grml64.squashfs ssh BOOT_IMAGE=/boot/grml64/vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2039796k/2088192k available (3409k kernel code, 452k absent, 47944k reserved, 3314k data, 572k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2999.275 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 5998.55 BogoMIPS (lpj=11997100)
[ 0.004019] pid_max: default: 32768 minimum: 301
[ 0.004106] Security Framework initialized
[ 0.004590] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.006108] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.006786] Mount-cache hash table entries: 256
[ 0.007023] Initializing cgroup subsys cpuacct
[ 0.007036] Initializing cgroup subsys memory
[ 0.007061] Initializing cgroup subsys devices
[ 0.008016] Initializing cgroup subsys freezer
[ 0.008022] Initializing cgroup subsys net_cls
[ 0.008029] Initializing cgroup subsys blkio
[ 0.008097] CPU: Physical Processor ID: 0
[ 0.008102] CPU: Processor Core ID: 0
[ 0.008107] using mwait in idle threads.
[ 0.008861] ACPI: Core revision 20110623
[ 0.013618] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.053312] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
[ 0.056003] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.056003] ... version: 0
[ 0.056003] ... bit width: 40
[ 0.056003] ... generic registers: 18
[ 0.056003] ... value mask: 000000ffffffffff
[ 0.056003] ... max period: 0000007fffffffff
[ 0.056003] ... fixed-purpose events: 0
[ 0.056003] ... event mask: 000000000003ffff
[ 0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.056003] Booting Node 0, Processors #1
[ 0.056003] smpboot cpu 1: start_ip = 9a000
[ 0.144057] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.144120] Brought up 2 CPUs
[ 0.144131] Total of 2 processors activated (11998.28 BogoMIPS).
[ 0.144881] devtmpfs: initialized
[ 0.148716] PM: Registering ACPI NVS region at 7f750000 (720896 bytes)
[ 0.148716] print_constraints: dummy:
[ 0.148716] NET: Registered protocol family 16
[ 0.148716] ACPI: bus type pci registered
[ 0.148729] PCI: Using configuration type 1 for base access
[ 0.149498] bio: create slab <bio-0> at 0
[ 0.149498] ACPI: Added _OSI(Module Device)
[ 0.149498] ACPI: Added _OSI(Processor Device)
[ 0.149498] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.149498] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.149498] ACPI: EC: Look up EC in DSDT
[ 0.153263] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.156893] ACPI: Interpreter enabled
[ 0.156902] ACPI: (supports S0 S1 S4 S5)
[ 0.156950] ACPI: Using IOAPIC for interrupt routing
[ 0.167161] ACPI: No dock devices found.
[ 0.167169] HEST: Table not found.
[ 0.167176] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.167303] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.167559] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.167566] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.167572] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.167578] pci_root PNP0A03:00: host bridge window [mem 0x7f800000-0xffefffff]
[ 0.167602] pci 0000:00:00.0: [8086:2570] type 0 class 0x000600
[ 0.167608] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[ 0.167620] pci 0000:00:00.0: reg 10: [mem 0xfe800000-0xfebfffff pref]
[ 0.167682] pci 0000:00:02.0: [8086:2572] type 0 class 0x000300
[ 0.167699] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.167708] pci 0000:00:02.0: reg 14: [mem 0xff280000-0xff2fffff]
[ 0.167717] pci 0000:00:02.0: reg 18: [io 0xec00-0xec07]
[ 0.167775] pci 0000:00:06.0: [8086:2576] type 0 class 0x000880
[ 0.167787] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff]
[ 0.167870] pci 0000:00:1d.0: [8086:24d2] type 0 class 0x000c03
[ 0.167920] pci 0000:00:1d.0: reg 20: [io 0xdc00-0xdc1f]
[ 0.167961] pci 0000:00:1d.1: [8086:24d4] type 0 class 0x000c03
[ 0.168021] pci 0000:00:1d.1: reg 20: [io 0xe000-0xe01f]
[ 0.168062] pci 0000:00:1d.2: [8086:24d7] type 0 class 0x000c03
[ 0.168110] pci 0000:00:1d.2: reg 20: [io 0xe400-0xe41f]
[ 0.168148] pci 0000:00:1d.3: [8086:24de] type 0 class 0x000c03
[ 0.168194] pci 0000:00:1d.3: reg 20: [io 0xe800-0xe81f]
[ 0.168243] pci 0000:00:1d.7: [8086:24dd] type 0 class 0x000c03
[ 0.168267] pci 0000:00:1d.7: reg 10: [mem 0xff27fc00-0xff27ffff]
[ 0.168351] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.168357] pci 0000:00:1d.7: PME# disabled
[ 0.168379] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.168430] pci 0000:00:1f.0: [8086:24d0] type 0 class 0x000601
[ 0.168497] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.168524] pci 0000:00:1f.1: [8086:24db] type 0 class 0x000101
[ 0.168540] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.168551] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.168562] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.168573] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.168583] pci 0000:00:1f.1: reg 20: [io 0xfc00-0xfc0f]
[ 0.168594] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[ 0.168628] pci 0000:00:1f.3: [8086:24d3] type 0 class 0x000c05
[ 0.168674] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.168716] pci 0000:00:1f.5: [8086:24d5] type 0 class 0x000401
[ 0.168733] pci 0000:00:1f.5: reg 10: [io 0xd800-0xd8ff]
[ 0.168743] pci 0000:00:1f.5: reg 14: [io 0xd400-0xd43f]
[ 0.168753] pci 0000:00:1f.5: reg 18: [mem 0xff27f800-0xff27f9ff]
[ 0.168763] pci 0000:00:1f.5: reg 1c: [mem 0xff27f400-0xff27f4ff]
[ 0.168803] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.168808] pci 0000:00:1f.5: PME# disabled
[ 0.168850] pci 0000:01:05.0: [10ec:8139] type 0 class 0x000200
[ 0.168868] pci 0000:01:05.0: reg 10: [io 0xb800-0xb8ff]
[ 0.168878] pci 0000:01:05.0: reg 14: [mem 0xff0ffc00-0xff0ffcff]
[ 0.168935] pci 0000:01:05.0: supports D1 D2
[ 0.168938] pci 0000:01:05.0: PME# supported from D1 D2 D3hot D3cold
[ 0.168943] pci 0000:01:05.0: PME# disabled
[ 0.168982] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.168992] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 0.168998] pci 0000:00:1e.0: bridge window [mem 0xff000000-0xff0fffff]
[ 0.169005] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.169009] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.169012] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.169016] pci 0000:00:1e.0: bridge window [mem 0x7f800000-0xffefffff] (subtractive decode)
[ 0.169030] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.169194] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.169475] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.173749] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.173859] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.173965] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.174071] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.174178] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.174287] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.174395] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.174502] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.174654] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.174654] vgaarb: loaded
[ 0.174654] vgaarb: bridge control possible 0000:00:02.0
[ 0.174654] PCI: Using ACPI for IRQ routing
[ 0.174654] PCI: pci_cache_line_size set to 64 bytes
[ 0.174654] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.174654] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.174654] reserve RAM buffer: 000000007f740000 - 000000007fffffff
[ 0.174654] hpet clockevent registered
[ 0.174654] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.174654] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.174654] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.180050] Switching to clocksource hpet
[ 0.183618] pnp: PnP ACPI init
[ 0.183654] ACPI: bus type pnp registered
[ 0.183805] Switched to NOHz mode on CPU #0
[ 0.183828] pnp 00:00: [bus 00-ff]
[ 0.183833] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.183839] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.183843] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.183846] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.183850] pnp 00:00: [mem 0x00000000 window]
[ 0.183853] pnp 00:00: [mem 0x7f800000-0xffefffff window]
[ 0.183917] Switched to NOHz mode on CPU #1
[ 0.183939] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.184033] pnp 00:01: [dma 4]
[ 0.184036] pnp 00:01: [io 0x0000-0x000f]
[ 0.184040] pnp 00:01: [io 0x0081-0x0083]
[ 0.184042] pnp 00:01: [io 0x0087]
[ 0.184045] pnp 00:01: [io 0x0089-0x008b]
[ 0.184048] pnp 00:01: [io 0x008f]
[ 0.184051] pnp 00:01: [io 0x00c0-0x00df]
[ 0.184101] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.184126] pnp 00:02: [io 0x0070-0x0071]
[ 0.184142] pnp 00:02: [irq 8]
[ 0.184192] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.184214] pnp 00:03: [io 0x0061]
[ 0.184263] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.184284] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.184292] pnp 00:04: [irq 13]
[ 0.184344] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.185288] pnp 00:05: [io 0x03f0-0x03f5]
[ 0.185292] pnp 00:05: [io 0x03f7]
[ 0.185300] pnp 00:05: [irq 6]
[ 0.185304] pnp 00:05: [dma 2]
[ 0.185405] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.186063] pnp 00:06: [io 0x0378-0x037f]
[ 0.186067] pnp 00:06: [io 0x0778-0x077b]
[ 0.186075] pnp 00:06: [irq 7]
[ 0.186078] pnp 00:06: [dma 3]
[ 0.186385] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.186550] pnp 00:07: [io 0x0010-0x001f]
[ 0.186554] pnp 00:07: [io 0x0022-0x003f]
[ 0.186557] pnp 00:07: [io 0x0044-0x005f]
[ 0.186560] pnp 00:07: [io 0x0062-0x0063]
[ 0.186563] pnp 00:07: [io 0x0065-0x006f]
[ 0.186566] pnp 00:07: [io 0x0072-0x007f]
[ 0.186569] pnp 00:07: [io 0x0080]
[ 0.186574] pnp 00:07: [io 0x0084-0x0086]
[ 0.186577] pnp 00:07: [io 0x0088]
[ 0.186580] pnp 00:07: [io 0x008c-0x008e]
[ 0.186583] pnp 00:07: [io 0x0090-0x009f]
[ 0.186586] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.186589] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.186592] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.186595] pnp 00:07: [io 0x0800-0x087f]
[ 0.186598] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
[ 0.186602] pnp 00:07: [io 0x0480-0x04bf]
[ 0.186605] pnp 00:07: [io 0x0900-0x090f]
[ 0.186608] pnp 00:07: [mem 0xfed20000-0xfed8ffff]
[ 0.186611] pnp 00:07: [mem 0xff380000-0xffefffff]
[ 0.186710] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.186719] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.186725] system 00:07: [io 0x0480-0x04bf] has been reserved
[ 0.186731] system 00:07: [io 0x0900-0x090f] has been reserved
[ 0.186738] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.186745] system 00:07: [mem 0xff380000-0xffefffff] has been reserved
[ 0.186752] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.186860] pnp 00:08: [mem 0xfec00000-0xfec00fff]
[ 0.186864] pnp 00:08: [mem 0xfee00000-0xfee00fff]
[ 0.186939] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.186948] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.186955] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187610] pnp 00:09: [io 0x03f8-0x03ff]
[ 0.187619] pnp 00:09: [irq 4]
[ 0.187623] pnp 00:09: [dma 0 disabled]
[ 0.187755] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.187887] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
[ 0.187891] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
[ 0.187895] pnp 00:0a: [io 0x0290-0x029f]
[ 0.187971] system 00:0a: [io 0x0290-0x029f] has been reserved
[ 0.187980] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.188273] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.188277] pnp 00:0b: [mem 0x000c0000-0x000dffff]
[ 0.188280] pnp 00:0b: [mem 0x000e0000-0x000fffff]
[ 0.188283] pnp 00:0b: [mem 0x00100000-0x7f7fffff]
[ 0.188286] pnp 00:0b: [mem 0xfff00000-0xffffffff]
[ 0.188373] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.188381] system 00:0b: [mem 0x000c0000-0x000dffff] could not be reserved
[ 0.188387] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.188394] system 00:0b: [mem 0x00100000-0x7f7fffff] could not be reserved
[ 0.188401] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.188408] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.188720] pnp: PnP ACPI: found 12 devices
[ 0.188726] ACPI: ACPI bus type pnp unregistered
[ 0.198121] PCI: max bus depth: 1 pci_try_num: 2
[ 0.198144] pci 0000:00:1f.1: BAR 5: assigned [mem 0x7f800000-0x7f8003ff]
[ 0.198156] pci 0000:00:1f.1: BAR 5: set to [mem 0x7f800000-0x7f8003ff] (PCI address [0x7f800000-0x7f8003ff])
[ 0.198165] pci 0000:00:1e.0: PCI bridge to [bus 01-01]
[ 0.198171] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 0.198180] pci 0000:00:1e.0: bridge window [mem 0xff000000-0xff0fffff]
[ 0.198203] pci 0000:00:1e.0: setting latency timer to 64
[ 0.198209] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.198212] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.198216] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.198219] pci_bus 0000:00: resource 7 [mem 0x7f800000-0xffefffff]
[ 0.198222] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.198225] pci_bus 0000:01: resource 1 [mem 0xff000000-0xff0fffff]
[ 0.198229] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.198232] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.198235] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.198238] pci_bus 0000:01: resource 7 [mem 0x7f800000-0xffefffff]
[ 0.198339] NET: Registered protocol family 2
[ 0.198566] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.200041] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.202764] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.203412] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.203422] TCP reno registered
[ 0.203450] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.203485] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.203720] NET: Registered protocol family 1
[ 0.203752] pci 0000:00:02.0: Boot video device
[ 0.203864] PCI: CLS 0 bytes, default 64
[ 0.203951] Unpacking initramfs...
[ 2.340035] Freeing initrd memory: 10340k freed
[ 2.347217] audit: initializing netlink socket (disabled)
[ 2.347241] type=2000 audit(1326820749.340:1): initialized
[ 2.371425] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.384054] VFS: Disk quotas dquot_6.5.2
[ 2.384112] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.384202] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.384329] aufs 3.1-20111031
[ 2.384340] msgmni has been set to 4004
[ 2.384661] alg: No test for stdrng (krng)
[ 2.384725] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.384735] io scheduler noop registered
[ 2.384739] io scheduler deadline registered
[ 2.384764] io scheduler cfq registered (default)
[ 2.385039] vesafb: mode is 1024x768x16, linelength=2048, pages=4
[ 2.385045] vesafb: scrolling: redraw
[ 2.385050] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 2.385351] vesafb: framebuffer at 0xf0000000, mapped to 0xffffc90000900000, using 3072k, total 8000k
[ 2.405775] Console: switching to colour frame buffer device 128x48
[ 2.425041] fb0: VESA VGA frame buffer device
[ 2.425273] ERST: Table is not found!
[ 2.425415] GHES: HEST is not enabled!
[ 2.425680] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.446268] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.496694] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.512210] Linux agpgart interface v0.103
[ 2.512445] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[ 2.512676] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable
[ 2.513350] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 2.513798] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[ 2.514244] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.517303] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.517508] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.517956] mousedev: PS/2 mouse device common for all mice
[ 2.518244] rtc_cmos 00:02: RTC can wake from S4
[ 2.518573] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.518832] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 2.519094] cpuidle: using governor ladder
[ 2.526079] cpuidle: using governor menu
[ 2.533418] TCP cubic registered
[ 2.540209] NET: Registered protocol family 10
[ 2.548223] Mobile IPv6
[ 2.554895] NET: Registered protocol family 17
[ 2.561722] Registering the dns_resolver key type
[ 2.568684] PM: Hibernation image not present or could not be loaded.
[ 2.568705] registered taskstats version 1
[ 2.581967] rtc_cmos 00:02: setting system clock to 2012-01-17 17:19:10 UTC (1326820750)
[ 2.588853] Initializing network drop monitor service
[ 2.597394] Freeing unused kernel memory: 572k freed
[ 2.604402] Write protecting the kernel read-only data: 6144k
[ 2.614920] Freeing unused kernel memory: 668k freed
[ 2.625510] Freeing unused kernel memory: 620k freed
[ 2.762006] udevd[56]: starting version 175
[ 2.811752] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 2.811766] ACPI: Power Button [PWRB]
[ 2.811901] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.811910] ACPI: Power Button [PWRF]
[ 2.827646] usbcore: registered new interface driver usbfs
[ 2.827698] usbcore: registered new interface driver hub
[ 2.850502] [drm] Initialized drm 1.1.0 20060810
[ 2.856174] usbcore: registered new device driver usb
[ 2.857219] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.857230] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.857290] 8139cp 0000:01:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 2.857318] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 2.857354] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.857361] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.857422] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.857477] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.858173] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 2.858227] 8139too 0000:01:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.859321] 8139too 0000:01:05.0: eth0: RealTek RTL8139 at 0xffffc900008aac00, 00:13:8f:e5:6a:40, IRQ 22
[ 2.860703] SCSI subsystem initialized
[ 2.861375] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 2.870522] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff27fc00
[ 2.881473] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.890818] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.890914] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.890921] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.890927] usb usb1: Product: EHCI Host Controller
[ 2.890931] usb usb1: Manufacturer: Linux 3.1.0-3-grml-amd64 ehci_hcd
[ 2.890936] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.896285] hub 1-0:1.0: USB hub found
[ 2.896300] hub 1-0:1.0: 8 ports detected
[ 2.896520] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.896537] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.896545] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.896568] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.896635] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000dc00
[ 2.896716] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.896723] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.896729] usb usb2: Product: UHCI Host Controller
[ 2.896734] usb usb2: Manufacturer: Linux 3.1.0-3-grml-amd64 uhci_hcd
[ 2.896738] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.897100] hub 2-0:1.0: USB hub found
[ 2.897112] hub 2-0:1.0: 2 ports detected
[ 2.897278] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.897294] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.897301] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.897319] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.897379] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
[ 2.897467] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.897477] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.897484] usb usb3: Product: UHCI Host Controller
[ 2.897489] usb usb3: Manufacturer: Linux 3.1.0-3-grml-amd64 uhci_hcd
[ 2.897494] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.897760] hub 3-0:1.0: USB hub found
[ 2.897772] hub 3-0:1.0: 2 ports detected
[ 2.897948] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.897964] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.897972] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.897993] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.898060] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
[ 2.898142] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.898150] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.898155] usb usb4: Product: UHCI Host Controller
[ 2.898160] usb usb4: Manufacturer: Linux 3.1.0-3-grml-amd64 uhci_hcd
[ 2.898165] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.898482] hub 4-0:1.0: USB hub found
[ 2.898493] hub 4-0:1.0: 2 ports detected
[ 2.898633] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.898646] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.898653] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.898668] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.898702] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e800
[ 2.898769] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.898775] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.898779] usb usb5: Product: UHCI Host Controller
[ 2.898783] usb usb5: Manufacturer: Linux 3.1.0-3-grml-amd64 uhci_hcd
[ 2.898787] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.899875] hub 5-0:1.0: USB hub found
[ 2.899890] hub 5-0:1.0: 2 ports detected
[ 2.908890] Floppy drive(s): fd0 is 1.44M
[ 2.913199] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.913213] i915 0000:00:02.0: setting latency timer to 64
[ 2.916253] libata version 3.00 loaded.
[ 2.942190] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.942197] [drm] Driver supports precise vblank timestamp query.
[ 2.942775] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.944501] FDC 0 is a post-1991 82077
[ 2.973052] [drm] initialized overlay support
[ 3.090788] checking generic (f0000000 7d0000) vs hw (f0000000 8000000)
[ 3.090794] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 3.090820] Console: switching to colour dummy device 80x25
[ 3.091356] fbcon: inteldrmfb (fb0) is primary device
[ 3.124531] Console: switching to colour frame buffer device 160x64
[ 3.130339] fb0: inteldrmfb frame buffer device
[ 3.130342] drm: registered panic notifier
[ 3.130402] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.130458] ata_piix 0000:00:1f.1: version 2.13
[ 3.130505] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.130557] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.131635] scsi0 : ata_piix
[ 3.131903] scsi1 : ata_piix
[ 3.135163] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 3.135175] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 3.296067] usb 1-4: new high speed USB device number 3 using ehci_hcd
[ 3.344046] Refined TSC clocksource calibration: 2999.658 MHz.
[ 3.344054] Switching to clocksource tsc
[ 3.406186] device-mapper: uevent: version 1.0.3
[ 3.406391] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel at redhat.com
[ 3.450945] Uniform Multi-Platform E-IDE driver
[ 3.451447] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 3.515987] usb 1-4: New USB device found, idVendor=058f, idProduct=6387
[ 3.515993] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.515996] usb 1-4: Product: Mass Storage
[ 3.515999] usb 1-4: Manufacturer: Generic
[ 3.516010] usb 1-4: SerialNumber: 2E19D9AC
[ 3.519863] usbcore: registered new interface driver uas
[ 3.521701] Initializing USB Mass Storage driver...
[ 3.522067] scsi2 : usb-storage 1-4:1.0
[ 3.522283] usbcore: registered new interface driver usb-storage
[ 3.522289] USB Mass Storage support registered.
[ 3.756019] usb 2-1: new low speed USB device number 2 using uhci_hcd
[ 3.935522] usb 2-1: New USB device found, idVendor=046d, idProduct=c30f
[ 3.935527] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.935531] usb 2-1: Product: Logitech USB Keyboard
[ 3.935534] usb 2-1: Manufacturer: Logitech
[ 3.960863] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
[ 3.961032] generic-usb 0003:046D:C30F.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-1/input0
[ 3.995615] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input3
[ 3.995728] generic-usb 0003:046D:C30F.0002: input,hidraw1: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-1/input1
[ 3.995766] usbcore: registered new interface driver usbhid
[ 3.995772] usbhid: USB HID core driver
[ 4.522106] scsi 2:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 2
[ 4.528585] sd 2:0:0:0: [sda] 4100096 512-byte logical blocks: (2.09 GB/1.95 GiB)
[ 4.529077] sd 2:0:0:0: [sda] Write Protect is off
[ 4.529082] sd 2:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 4.529577] sd 2:0:0:0: [sda] No Caching mode page present
[ 4.529580] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 4.532083] sd 2:0:0:0: [sda] No Caching mode page present
[ 4.532088] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 4.571103] sda: sda4
[ 4.573197] sd 2:0:0:0: [sda] No Caching mode page present
[ 4.573201] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 4.573205] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 5.591524] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 5.595149] ISO 9660 Extensions: RRIP_1991A
[ 27.323173] loop: module loaded
[ 27.444599] loop0: unknown partition table
[ 29.975379] udevd[666]: starting version 175
[ 30.189275] ACPI: acpi_idle registered with cpuidle
[ 30.251648] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 30.390779] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 30.553384] intel_rng: FWH not detected
[ 30.563080] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 30.576625] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 30.807002] parport_pc 00:06: reported by Plug and Play ACPI
[ 30.807059] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 30.866620] iTCO_vendor_support: vendor-support=0
[ 30.871876] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 30.872947] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
[ 30.874347] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 31.216640] snd_intel8x0 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 31.216683] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
[ 31.540303] intel8x0_measure_ac97_clock: measured 53347 usecs (2571 samples)
[ 31.540310] intel8x0: clocking to 48000
[ 33.500146] 8139too 0000:01:05.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 33.644458] RPC: Registered named UNIX socket transport module.
[ 33.644466] RPC: Registered udp transport module.
[ 33.644470] RPC: Registered tcp transport module.
[ 33.644474] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 33.687586] FS-Cache: Loaded
[ 33.739165] FS-Cache: Netfs 'nfs' registered for caching
[ 33.763021] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 36.338361] fuse init (API version 7.17)
[ 36.389872] ipmi message handler version 39.2
[ 44.432010] eth0: no IPv6 routers present
[ 49.656423] end_request: I/O error, dev fd0, sector 0
[ 190.483621] w83627ehf: Found W83627EHG chip at 0x290
[ 190.483847] w83627ehf w83627ehf.656: Setting VID input voltage to VRM10
-------------- next part --------------
# dmidecode 2.11
SMBIOS 2.4 present.
22 structures occupying 1139 bytes.
Table at 0x000FD060.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: American Megatrends Inc.
Version: P2.70
Release Date: 09/05/2006
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 512 kB
Characteristics:
PCI is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
BIOS Revision: 8.10
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: To Be Filled By O.E.M.
Product Name: To Be Filled By O.E.M.
Version: To Be Filled By O.E.M.
Serial Number: To Be Filled By O.E.M.
UUID: 00020003-0004-0005-0006-000700080009
Wake-up Type: Power Switch
SKU Number: To Be Filled By O.E.M.
Family: To Be Filled By O.E.M.
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer:
Product Name: 775i65G.
Version:
Serial Number:
Asset Tag:
Features:
Board is a hosting board
Board is replaceable
Location In Chassis:
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
Handle 0x0003, DMI type 3, 21 bytes
Chassis Information
Manufacturer: To Be Filled By O.E.M.
Type: Desktop
Lock: Not Present
Version: To Be Filled By O.E.M.
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Height: Unspecified
Number Of Power Cords: 1
Contained Elements: 0
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: CPUSocket
Type: Central Processor
Family: Pentium 4
Manufacturer: Intel
ID: 49 0F 00 00 FF FB EB BF
Signature: Type 0, Family 15, Model 4, Stepping 9
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Pentium(R) 4 CPU 3.00GHz
Voltage: 1.4 V
External Clock: 200 MHz
Max Speed: 3000 MHz
Current Speed: 3000 MHz
Status: Populated, Enabled
Upgrade: Other
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Part Number: To Be Filled By O.E.M.
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1-Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 16 kB
Maximum Size: 16 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Parity
System Type: Data
Associativity: 8-way Set-associative
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2-Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 1024 kB
Maximum Size: 1024 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0007, DMI type 5, 20 bytes
Memory Controller Information
Error Detecting Method: 64-bit ECC
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 2048 MB
Maximum Total Memory Size: 4096 MB
Supported Speeds:
70 ns
60 ns
Supported Memory Types:
DIMM
SDRAM
Memory Module Voltage: 3.3 V
Associated Memory Slots: 2
0x0008
0x0009
Enabled Error Correcting Capabilities:
None
Handle 0x0008, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM0
Bank Connections: 1 0
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM1
Bank Connections: 5 4
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x000A, DMI type 9, 13 bytes
System Slot Information
Designation: AGP1
Type: 32-bit AGP 8x
Current Usage: Available
Length: Short
ID: 0
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x000B, DMI type 9, 13 bytes
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: Available
Length: Short
ID: 1
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x000C, DMI type 9, 13 bytes
System Slot Information
Designation: PCI2
Type: 32-bit PCI
Current Usage: Available
Length: Short
ID: 2
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x000D, DMI type 9, 13 bytes
System Slot Information
Designation: PCI3
Type: 32-bit PCI
Current Usage: Available
Length: Short
ID: 3
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x000E, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 4 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x000F, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Array Handle: 0x000E
Partition Width: 4
Handle 0x0010, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x000E
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM0
Bank Locator: BANK0
Type: SDRAM
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Manufacturer0
Serial Number: SerNum0
Asset Tag: AssetTagNum0
Part Number: PartNum0
Handle 0x0011, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0010
Memory Array Mapped Address Handle: 0x000F
Partition Row Position: 1
Interleaved Data Depth: 1
Handle 0x0012, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x000E
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM1
Bank Locator: BANK1
Type: SDRAM
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Manufacturer1
Serial Number: SerNum1
Asset Tag: AssetTagNum1
Part Number: PartNum1
Handle 0x0013, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00040000000
Ending Address: 0x0007FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0012
Memory Array Mapped Address Handle: 0x000F
Partition Row Position: 1
Interleaved Data Depth: 1
Handle 0x0014, DMI type 32, 20 bytes
System Boot Information
Status: No errors detected
Handle 0x0015, DMI type 127, 4 bytes
End Of Table
-------------- next part --------------
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02)
Subsystem: ASRock Incorporation Device [1849:2570]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe800000 (32-bit, prefetchable) [size=4M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00: 86 80 70 25 06 00 90 20 02 00 00 06 00 00 00 00
10: 08 00 80 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 70 25
30: 00 00 00 00 e4 00 00 00 00 00 00 00 00 00 00 00
00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G Integrated Graphics Controller [8086:2572] (rev 02) (prog-if 00 [VGA controller])
Subsystem: ASRock Incorporation Device [1849:2572]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at ff280000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at ec00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00: 86 80 72 25 07 00 98 00 02 00 00 03 00 00 00 00
10: 08 00 00 f0 00 00 28 ff 01 ec 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 72 25
30: 00 00 00 00 d0 00 00 00 00 00 00 00 0a 01 00 00
00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface [8086:2576] (rev 02)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
00: 86 80 76 25 02 00 80 00 02 00 80 08 00 00 00 00
10: 00 00 cf fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:1d.0 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation Device [1849:24d0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at dc00 [size=32]
Kernel driver in use: uhci_hcd
00: 86 80 d2 24 05 00 80 02 02 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 dc 00 00 00 00 00 00 00 00 00 00 49 18 d0 24
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
00:1d.1 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation Device [1849:24d0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e000 [size=32]
Kernel driver in use: uhci_hcd
00: 86 80 d4 24 05 00 80 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e0 00 00 00 00 00 00 00 00 00 00 49 18 d0 24
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 00
00:1d.2 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation Device [1849:24d0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e400 [size=32]
Kernel driver in use: uhci_hcd
00: 86 80 d7 24 05 00 80 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e4 00 00 00 00 00 00 00 00 00 00 49 18 d0 24
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 03 00 00
00:1d.3 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation Device [1849:24d0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e800 [size=32]
Kernel driver in use: uhci_hcd
00: 86 80 de 24 05 00 80 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e8 00 00 00 00 00 00 00 00 00 00 49 18 d0 24
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00
00:1d.7 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device [1849:24d0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at ff27fc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00: 86 80 dd 24 06 01 90 02 02 20 03 0c 00 00 00 00
10: 00 fc 27 ff 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 d0 24
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 04 00 00
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ff000000-ff0fffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00: 86 80 4e 24 07 01 80 00 c2 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 20 b0 b0 80 02
20: 00 ff 00 ff f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00: 86 80 d0 24 0f 00 80 02 02 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: ASRock Incorporation Device [1849:24d0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at fc00 [size=16]
Region 5: Memory at 80000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00: 86 80 db 24 07 00 88 02 02 8a 01 01 00 00 00 00
10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
20: 01 fc 00 00 00 00 00 80 00 00 00 00 49 18 d0 24
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
Subsystem: ASRock Incorporation Device [1849:24d0]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
00: 86 80 d3 24 01 00 80 02 02 00 05 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 04 00 00 00 00 00 00 00 00 00 00 49 18 d0 24
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
Subsystem: ASRock Incorporation Device [1849:9761]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at d800 [size=256]
Region 1: I/O ports at d400 [size=64]
Region 2: Memory at ff27f800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at ff27f400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0
00: 86 80 d5 24 07 00 90 02 02 00 01 04 00 00 00 00
10: 01 d8 00 00 01 d4 00 00 00 f8 27 ff 00 f4 27 ff
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 61 97
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 02 00 00
01:05.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: ASRock Incorporation Device [1849:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at b800 [size=256]
Region 1: Memory at ff0ffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
00: ec 10 39 81 07 00 90 02 10 00 00 02 00 20 00 00
10: 01 b8 00 00 00 fc 0f ff 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 39 81
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 20 40
-------------- next part --------------
w83627ehf-isa-0290
Adapter: ISA adapter
Vcore: +1.33 V (min = +0.00 V, max = +1.74 V)
in1: +1.34 V (min = +1.71 V, max = +1.37 V) ALARM
AVCC: +3.30 V (min = +1.10 V, max = +3.17 V) ALARM
+3.3V: +3.28 V (min = +0.75 V, max = +2.38 V) ALARM
in4: +1.66 V (min = +1.40 V, max = +1.00 V) ALARM
in5: +1.74 V (min = +0.88 V, max = +1.53 V) ALARM
in6: +1.76 V (min = +1.97 V, max = +1.41 V) ALARM
3VSB: +3.28 V (min = +1.46 V, max = +3.38 V)
Vbat: +3.15 V (min = +1.65 V, max = +1.46 V) ALARM
in9: +1.60 V (min = +0.39 V, max = +2.03 V)
fan1: 0 RPM (min = 703 RPM, div = 32) ALARM
fan2: 2163 RPM (min = 888 RPM, div = 8)
fan3: 0 RPM (min = 1081 RPM, div = 32) ALARM
fan5: 0 RPM (min = 2812 RPM, div = 32) ALARM
temp1: +37.0°C (high = -67.0°C, hyst = -85.0°C) ALARM sensor = thermistor
temp2: +38.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode
temp3: +36.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
cpu0_vid: +0.000 V
-------------- next part --------------
w83627ehf-isa-0290
Adapter: ISA adapter
Vcore: +1.33 V (min = +0.00 V, max = +1.74 V)
in1: +1.37 V (min = +1.71 V, max = +1.37 V) ALARM
AVCC: +3.28 V (min = +1.10 V, max = +3.17 V) ALARM
+3.3V: +3.28 V (min = +0.75 V, max = +2.38 V) ALARM
in4: +1.66 V (min = +1.40 V, max = +1.00 V) ALARM
in5: +1.74 V (min = +0.88 V, max = +1.53 V) ALARM
in6: +1.76 V (min = +1.97 V, max = +1.41 V) ALARM
3VSB: +3.30 V (min = +1.46 V, max = +3.38 V)
Vbat: +3.07 V (min = +1.65 V, max = +1.46 V) ALARM
in9: +1.56 V (min = +0.39 V, max = +2.03 V)
fan1: 0 RPM (min = 703 RPM, div = 64) ALARM
fan2: 2136 RPM (min = 888 RPM, div = 8)
fan3: 0 RPM (min = 1110 RPM, div = 64) ALARM
fan5: 0 RPM (min = 3013 RPM, div = 64) ALARM
temp1: +37.0°C (high = -67.0°C, hyst = -85.0°C) ALARM sensor = thermistor
temp2: +36.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode
temp3: +34.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
cpu0_vid: +0.000 V
-------------- next part --------------
superiotool r (master-3ad8c54)
Probing for ALi Super I/O at 0x3f0...
Failed. Returned data: id=0xffff, rev=0xff
Probing for ALi Super I/O at 0x370...
Failed. Returned data: id=0xffff, rev=0xff
Probing for Fintek Super I/O at 0x2e...
Failed. Returned data: vid=0x4400, id=0x6388
Probing for Fintek Super I/O at 0x4e...
Failed. Returned data: vid=0xffff, id=0xffff
Probing for Fintek Super I/O at 0x2e...
Failed. Returned data: vid=0xffff, id=0xffff
Probing for Fintek Super I/O at 0x4e...
Failed. Returned data: vid=0xffff, id=0xffff
Probing for ITE Super I/O (init=standard) at 0x25e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8502e) at 0x25e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8761e) at 0x25e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8228e) at 0x25e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x25e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=standard) at 0x2e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8502e) at 0x2e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8761e) at 0x2e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8228e) at 0x2e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
Failed. Returned data: id=0x8863, rev=0xf
Probing for ITE Super I/O (init=standard) at 0x4e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8502e) at 0x4e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8761e) at 0x4e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8228e) at 0x4e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=legacy/it8671f) at 0x370...
Failed. Returned data: id=0xffff, rev=0xf
Probing for NSC Super I/O at 0x2e...
Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x4e...
Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x15c...
Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x164e...
Failed. Returned data: port=0xff, port+1=0xff
Probing for Nuvoton Super I/O at 0x164e...
Failed. Returned data: chip_id=0xffff
Probing for Nuvoton Super I/O (sid=0xfc) at 0x164e...
Failed. Returned data: sid=0xff, id=0xffff, rev=0x00
Probing for Nuvoton Super I/O at 0x2e...
Failed. Returned data: chip_id=0x8863
Probing for Nuvoton Super I/O (sid=0xfc) at 0x2e...
Failed. Returned data: sid=0xff, id=0x8863, rev=0x00
Probing for Nuvoton Super I/O at 0x4e...
Failed. Returned data: chip_id=0xffff
Probing for Nuvoton Super I/O (sid=0xfc) at 0x4e...
Failed. Returned data: sid=0xff, id=0xffff, rev=0x00
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
Failed. Returned data: id=0xff, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
Found Winbond W83627EHF/EF/EHG/EG (id=0x88, rev=0x63) at 0x2e
Register dump:
idx 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
val 88 63 ff 00 44 00 00 ff 50 04 00 00 09 41 00 ff
def 88 MM ff 00 MM 00 MM RR 50 04 00 RR 00 21 00 00
LDN 0x00 (Floppy)
idx 30 60 61 70 74 f0 f1 f2 f4 f5
val 01 03 f0 06 02 0e 00 ff 00 00
def 01 03 f0 06 02 8e 00 ff 00 00
LDN 0x01 (Parallel port)
idx 30 60 61 70 74 f0
val 00 03 78 07 03 3b
def 01 03 78 07 04 3f
LDN 0x02 (COM1)
idx 30 60 61 70 f0
val 01 03 f8 04 00
def 01 03 f8 04 00
LDN 0x03 (COM2)
idx 30 60 61 70 f0 f1
val 01 02 f8 03 00 5c
def 01 02 f8 03 00 00
LDN 0x05 (Keyboard)
idx 30 60 61 62 63 70 72 f0
val 01 00 60 00 64 01 0c 82
def 01 00 60 00 64 01 0c 83
LDN 0x06 (Serial flash interface)
idx 30 62 63
val 00 ff ff
def 00 00 00
LDN 0x07 (GPIO 1, GPIO 6, game port, MIDI port)
idx 30 60 61 62 63 70 f0 f1 f2 f3 f4 f5 f6 f7
val 00 02 01 03 30 00 ff ff ff ff ff ff ff 00
def 00 02 01 03 30 09 ff 00 00 00 ff 00 00 00
LDN 0x08 (WDTO#, PLED)
idx 30 f5 f6 f7
val 00 ff 00 ff
def 00 00 00 00
LDN 0x09 (GPIO 2, GPIO 3, GPIO 4, GPIO 5, SUSLED)
idx 30 e0 e1 e2 e3 e4 e5 f0 f1 f2 f3 f4 f5 f6 f7
val 0e ff 01 00 ff ff ff a0 f9 00 40 ff f3 00 00
def 00 ff 00 00 ff 00 00 ff 00 00 00 ff 00 00 00
LDN 0x0a (ACPI)
idx 30 70 e0 e1 e2 e3 e4 e5 e6 e7 e8 f2 f3 f4 f6 f7
val 00 00 01 00 ff 24 00 00 0c 00 09 7c 00 00 00 00
def 00 00 01 00 ff 08 00 RR 00 00 RR 7c 00 00 00 00
LDN 0x0b (Hardware monitor)
idx 30 60 61 70 f0 f1
val 01 02 90 00 c1 3f
def 00 00 00 00 c1 00
Hardware monitor (0x0295)
Probing for Winbond Super I/O (init=0x88) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x3f0...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x3f0...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for VIA Super I/O at 0x3f0...
PCI device 1106:0686 not found.
Probing for AMD EC Super I/O at 0xaa...
Probing for Server Engines Super I/O at 0x2e...
Failed. Returned data: id=0xffff, rev=0xff
Probing for Infineon Super I/O at 0x2e...
Failed. Returned data: id=0xff, rev=0xff
Probing for Infineon Super I/O at 0x4e...
Failed. Returned data: id=0xff, rev=0xff
-------------- next part --------------
[ 186.462]
X.Org X Server 1.11.2.902 (1.11.3 RC 2)
Release Date: 2011-12-09
[ 186.470] X Protocol Version 11, Revision 0
[ 186.472] Build Operating System: Linux 3.1.0-1-amd64 x86_64 Debian
[ 186.475] Current Operating System: Linux grml 3.1.0-3-grml-amd64 #1 SMP Wed Dec 21 23:56:26 UTC 2011 x86_64
[ 186.477] Kernel command line: initrd=/boot/grml64/initrd.img boot=live live-media-path=/live/grml64/ bootid=grml64201112 apm=power-off vga=791 nomce toram=grml64.squashfs ssh BOOT_IMAGE=/boot/grml64/vmlinuz
[ 186.483] Build Date: 10 December 2011 09:55:45PM
[ 186.485] xorg-server 2:1.11.2.902-1 (Cyril Brulebois <kibi at debian.org>)
[ 186.488] Current version of pixman: 0.24.0
[ 186.491] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 186.496] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 186.504] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 17 16:48:28 2012
[ 186.514] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 186.526] (==) No Layout section. Using the first Screen section.
[ 186.526] (==) No screen section available. Using defaults.
[ 186.526] (**) |-->Screen "Default Screen Section" (0)
[ 186.526] (**) | |-->Monitor "<default monitor>"
[ 186.548] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 186.548] (==) Automatically adding devices
[ 186.548] (==) Automatically enabling devices
[ 186.552] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 186.552] Entry deleted from font path.
[ 186.552] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 186.552] Entry deleted from font path.
[ 186.553] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 186.553] Entry deleted from font path.
[ 186.553] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 186.553] Entry deleted from font path.
[ 186.554] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 186.554] Entry deleted from font path.
[ 186.554] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/75dpi,
built-ins
[ 186.554] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 186.554] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 186.554] (II) Loader magic: 0x7f8622d45ae0
[ 186.554] (II) Module ABI versions:
[ 186.554] X.Org ANSI C Emulation: 0.4
[ 186.554] X.Org Video Driver: 11.0
[ 186.554] X.Org XInput driver : 13.0
[ 186.554] X.Org Server Extension : 6.0
[ 186.555] (--) PCI:*(0:0:2:0) 8086:2572:1849:2572 rev 2, Mem @ 0xf0000000/134217728, 0xff280000/524288, I/O @ 0x0000ec00/8
[ 186.555] (II) Open ACPI successful (/var/run/acpid.socket)
[ 186.555] (II) LoadModule: "extmod"
[ 186.559] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 186.576] (II) Module extmod: vendor="X.Org Foundation"
[ 186.576] compiled for 1.11.2.902, module version = 1.0.0
[ 186.576] Module class: X.Org Server Extension
[ 186.576] ABI class: X.Org Server Extension, version 6.0
[ 186.576] (II) Loading extension SELinux
[ 186.576] (II) Loading extension MIT-SCREEN-SAVER
[ 186.576] (II) Loading extension XFree86-VidModeExtension
[ 186.576] (II) Loading extension XFree86-DGA
[ 186.576] (II) Loading extension DPMS
[ 186.576] (II) Loading extension XVideo
[ 186.576] (II) Loading extension XVideo-MotionCompensation
[ 186.576] (II) Loading extension X-Resource
[ 186.576] (II) LoadModule: "dbe"
[ 186.577] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 186.592] (II) Module dbe: vendor="X.Org Foundation"
[ 186.592] compiled for 1.11.2.902, module version = 1.0.0
[ 186.592] Module class: X.Org Server Extension
[ 186.592] ABI class: X.Org Server Extension, version 6.0
[ 186.592] (II) Loading extension DOUBLE-BUFFER
[ 186.592] (II) LoadModule: "glx"
[ 186.593] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 186.612] (II) Module glx: vendor="X.Org Foundation"
[ 186.612] compiled for 1.11.2.902, module version = 1.0.0
[ 186.612] ABI class: X.Org Server Extension, version 6.0
[ 186.612] (==) AIGLX enabled
[ 186.612] (II) Loading extension GLX
[ 186.612] (II) LoadModule: "record"
[ 186.613] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 186.613] (II) Module record: vendor="X.Org Foundation"
[ 186.613] compiled for 1.11.2.902, module version = 1.13.0
[ 186.613] Module class: X.Org Server Extension
[ 186.613] ABI class: X.Org Server Extension, version 6.0
[ 186.613] (II) Loading extension RECORD
[ 186.613] (II) LoadModule: "dri"
[ 186.614] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 186.626] (II) Module dri: vendor="X.Org Foundation"
[ 186.627] compiled for 1.11.2.902, module version = 1.0.0
[ 186.627] ABI class: X.Org Server Extension, version 6.0
[ 186.627] (II) Loading extension XFree86-DRI
[ 186.627] (II) LoadModule: "dri2"
[ 186.627] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 186.627] (II) Module dri2: vendor="X.Org Foundation"
[ 186.627] compiled for 1.11.2.902, module version = 1.2.0
[ 186.627] ABI class: X.Org Server Extension, version 6.0
[ 186.627] (II) Loading extension DRI2
[ 186.627] (==) Matched intel as autoconfigured driver 0
[ 186.627] (==) Matched vesa as autoconfigured driver 1
[ 186.627] (==) Matched fbdev as autoconfigured driver 2
[ 186.627] (==) Assigned the driver to the xf86ConfigLayout
[ 186.627] (II) LoadModule: "intel"
[ 186.628] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 186.652] (II) Module intel: vendor="X.Org Foundation"
[ 186.652] compiled for 1.11.1.902, module version = 2.17.0
[ 186.652] Module class: X.Org Video Driver
[ 186.652] ABI class: X.Org Video Driver, version 11.0
[ 186.652] (II) LoadModule: "vesa"
[ 186.652] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 186.652] (II) Module vesa: vendor="X.Org Foundation"
[ 186.652] compiled for 1.11.0, module version = 2.3.0
[ 186.652] Module class: X.Org Video Driver
[ 186.652] ABI class: X.Org Video Driver, version 11.0
[ 186.652] (II) LoadModule: "fbdev"
[ 186.652] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 186.669] (II) Module fbdev: vendor="X.Org Foundation"
[ 186.669] compiled for 1.11.0, module version = 0.4.2
[ 186.669] ABI class: X.Org Video Driver, version 11.0
[ 186.669] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 186.669] (II) VESA: driver for VESA chipsets: vesa
[ 186.669] (II) FBDEV: driver for framebuffer: fbdev
[ 186.669] (--) using VT number 7
[ 186.679] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 186.679] (WW) Falling back to old probe method for vesa
[ 186.679] (WW) Falling back to old probe method for fbdev
[ 186.680] (II) Loading sub module "fbdevhw"
[ 186.680] (II) LoadModule: "fbdevhw"
[ 186.680] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 186.693] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 186.693] compiled for 1.11.2.902, module version = 0.0.2
[ 186.693] ABI class: X.Org Video Driver, version 11.0
[ 186.693] drmOpenDevice: node name is /dev/dri/card0
[ 186.693] drmOpenDevice: open result is 9, (OK)
[ 186.693] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 186.693] drmOpenDevice: node name is /dev/dri/card0
[ 186.693] drmOpenDevice: open result is 9, (OK)
[ 186.693] drmOpenByBusid: drmOpenMinor returns 9
[ 186.693] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 186.693] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 186.693] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 186.693] (==) intel(0): RGB weight 888
[ 186.693] (==) intel(0): Default visual is TrueColor
[ 186.693] (II) intel(0): Integrated Graphics Chipset: Intel(R) 865G
[ 186.693] (--) intel(0): Chipset: "865G"
[ 186.693] (**) intel(0): Relaxed fencing disabled
[ 186.694] (**) intel(0): Wait on SwapBuffers? enabled
[ 186.694] (**) intel(0): Triple buffering? enabled
[ 186.694] (**) intel(0): Framebuffer tiled
[ 186.694] (**) intel(0): Pixmaps tiled
[ 186.694] (**) intel(0): 3D buffers tiled
[ 186.694] (**) intel(0): SwapBuffers wait enabled
[ 186.694] (==) intel(0): video overlay key set to 0x101fe
[ 186.800] (II) intel(0): Output VGA1 has no monitor section
[ 186.907] (II) intel(0): EDID for output VGA1
[ 186.907] (II) intel(0): Manufacturer: PTS Model: 2ff Serial#: 128708
[ 186.907] (II) intel(0): Year: 2003 Week: 37
[ 186.907] (II) intel(0): EDID Version: 1.3
[ 186.907] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 186.907] (II) intel(0): Sync: Separate
[ 186.907] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 186.907] (II) intel(0): Gamma: 2.50
[ 186.907] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 186.907] (II) intel(0): First detailed timing not preferred mode in violation of standard!
[ 186.907] (II) intel(0): redX: 0.630 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 186.907] (II) intel(0): blueX: 0.148 blueY: 0.098 whiteX: 0.310 whiteY: 0.330
[ 186.907] (II) intel(0): Supported established timings:
[ 186.907] (II) intel(0): 720x400 at 70Hz
[ 186.907] (II) intel(0): 640x480 at 60Hz
[ 186.907] (II) intel(0): 640x480 at 67Hz
[ 186.907] (II) intel(0): 640x480 at 72Hz
[ 186.907] (II) intel(0): 640x480 at 75Hz
[ 186.907] (II) intel(0): 800x600 at 56Hz
[ 186.907] (II) intel(0): 800x600 at 60Hz
[ 186.907] (II) intel(0): 800x600 at 72Hz
[ 186.907] (II) intel(0): 800x600 at 75Hz
[ 186.907] (II) intel(0): 832x624 at 75Hz
[ 186.907] (II) intel(0): 1024x768 at 60Hz
[ 186.907] (II) intel(0): 1024x768 at 70Hz
[ 186.907] (II) intel(0): 1024x768 at 75Hz
[ 186.907] (II) intel(0): 1280x1024 at 75Hz
[ 186.907] (II) intel(0): Manufacturer's mask: 0
[ 186.907] (II) intel(0): Supported standard timings:
[ 186.907] (II) intel(0): #0: hsize: 640 vsize 360 refresh: 70 vid: 51761
[ 186.907] (II) intel(0): #1: hsize: 640 vsize 400 refresh: 70 vid: 2609
[ 186.907] (II) intel(0): #2: hsize: 720 vsize 405 refresh: 70 vid: 51771
[ 186.907] (II) intel(0): #3: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 186.907] (II) intel(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 186.907] (II) intel(0): Supported detailed timing:
[ 186.907] (II) intel(0): clock: 108.0 MHz Image Size: 337 x 270 mm
[ 186.907] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 186.907] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 186.907] (II) intel(0): Ranges: V min: 60 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 145 MHz
[ 186.907] (II) intel(0): Monitor name: CY-767C
[ 186.907] (II) intel(0): Serial No: FGZJ390128708
[ 186.907] (II) intel(0): EDID (in hex):
[ 186.907] (II) intel(0): 00ffffffffffff004293ff02c4f60100
[ 186.907] (II) intel(0): 250d010368221b96e86e06a1544c9926
[ 186.907] (II) intel(0): 194f54bfef0031ca310a3bca614f8180
[ 186.907] (II) intel(0): 000000000000302a009851002a403070
[ 186.907] (II) intel(0): 1300510e1100001e000000fd003c4b1e
[ 186.907] (II) intel(0): 500e000a202020202020000000fc0043
[ 186.907] (II) intel(0): 592d373637430a2020202020000000ff
[ 186.907] (II) intel(0): 0046475a4a333930313238373038003e
[ 186.907] (II) intel(0): EDID vendor "PTS", prod id 767
[ 186.908] (II) intel(0): Using EDID range info for horizontal sync
[ 186.908] (II) intel(0): Using EDID range info for vertical refresh
[ 186.908] (II) intel(0): Printing DDC gathered Modelines:
[ 186.908] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 186.908] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 186.908] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 186.908] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 186.908] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 186.908] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 186.908] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 186.908] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 186.908] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 186.908] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 186.908] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 186.908] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 186.908] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 186.908] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 186.908] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 186.908] (II) intel(0): Modeline "640x360"x70.0 20.58 640 648 712 784 360 361 364 375 -hsync +vsync (26.2 kHz)
[ 186.908] (II) intel(0): Modeline "640x400"x70.0 23.35 640 656 720 800 400 401 404 417 -hsync +vsync (29.2 kHz)
[ 186.908] (II) intel(0): Modeline "720x405"x70.0 26.47 720 736 808 896 405 406 409 422 -hsync +vsync (29.5 kHz)
[ 186.908] (II) intel(0): Printing probed modes for output VGA1
[ 186.908] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 186.908] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 186.908] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 186.908] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 186.908] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 186.908] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 186.908] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 186.908] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 186.908] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 186.908] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 186.908] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 186.908] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 186.908] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 186.908] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 186.908] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 186.908] (II) intel(0): Modeline "720x405"x70.0 26.48 720 736 808 896 405 406 409 422 -hsync +vsync (29.6 kHz)
[ 186.908] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 186.908] (II) intel(0): Output VGA1 connected
[ 186.908] (II) intel(0): Using exact sizes for initial modes
[ 186.908] (II) intel(0): Output VGA1 using initial mode 1280x1024
[ 186.908] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 186.909] (II) intel(0): Kernel page flipping support detected, enabling
[ 186.909] (**) intel(0): Display dimensions: (340, 270) mm
[ 186.909] (**) intel(0): DPI set to (95, 96)
[ 186.909] (II) Loading sub module "fb"
[ 186.909] (II) LoadModule: "fb"
[ 186.909] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 186.910] (II) Module fb: vendor="X.Org Foundation"
[ 186.910] compiled for 1.11.2.902, module version = 1.0.0
[ 186.910] ABI class: X.Org ANSI C Emulation, version 0.4
[ 186.910] (II) Loading sub module "dri2"
[ 186.910] (II) LoadModule: "dri2"
[ 186.910] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 186.910] (II) Module dri2: vendor="X.Org Foundation"
[ 186.910] compiled for 1.11.2.902, module version = 1.2.0
[ 186.910] ABI class: X.Org Server Extension, version 6.0
[ 186.910] (II) UnloadModule: "vesa"
[ 186.910] (II) Unloading vesa
[ 186.910] (II) UnloadModule: "fbdev"
[ 186.910] (II) Unloading fbdev
[ 186.910] (II) UnloadModule: "fbdevhw"
[ 186.910] (II) Unloading fbdevhw
[ 186.910] (==) Depth 24 pixmap format is 32 bpp
[ 186.910] (II) intel(0): [DRI2] Setup complete
[ 186.911] (II) intel(0): [DRI2] DRI driver: i915
[ 186.911] (II) intel(0): Allocated new frame buffer 1280x1024 stride 8192, tiled
[ 186.911] (II) UXA(0): Driver registered support for the following operations:
[ 186.911] (II) solid
[ 186.911] (II) copy
[ 186.911] (II) composite (RENDER acceleration)
[ 186.911] (II) put_image
[ 186.911] (II) get_image
[ 186.911] (==) intel(0): Backing store disabled
[ 186.911] (==) intel(0): Silken mouse enabled
[ 186.911] (II) intel(0): Initializing HW Cursor
[ 186.940] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 186.940] (==) intel(0): DPMS enabled
[ 186.940] (==) intel(0): Intel XvMC decoder disabled
[ 186.940] (II) intel(0): Set up overlay video
[ 186.940] (II) intel(0): direct rendering: DRI2 Enabled
[ 186.940] (==) intel(0): hotplug detection: "enabled"
[ 186.940] (--) RandR disabled
[ 186.940] (II) Initializing built-in extension Generic Event Extension
[ 186.940] (II) Initializing built-in extension SHAPE
[ 186.940] (II) Initializing built-in extension MIT-SHM
[ 186.940] (II) Initializing built-in extension XInputExtension
[ 186.940] (II) Initializing built-in extension XTEST
[ 186.940] (II) Initializing built-in extension BIG-REQUESTS
[ 186.940] (II) Initializing built-in extension SYNC
[ 186.940] (II) Initializing built-in extension XKEYBOARD
[ 186.940] (II) Initializing built-in extension XC-MISC
[ 186.940] (II) Initializing built-in extension SECURITY
[ 186.940] (II) Initializing built-in extension XINERAMA
[ 186.940] (II) Initializing built-in extension XFIXES
[ 186.940] (II) Initializing built-in extension RENDER
[ 186.940] (II) Initializing built-in extension RANDR
[ 186.940] (II) Initializing built-in extension COMPOSITE
[ 186.940] (II) Initializing built-in extension DAMAGE
[ 186.941] (II) SELinux: Disabled on system
[ 186.951] (EE) AIGLX error: dlopen of /usr/lib/x86_64-linux-gnu/dri/i915_dri.so failed (/usr/lib/x86_64-linux-gnu/dri/i915_dri.so: cannot open shared object file: No such file or directory)
[ 186.951] (EE) AIGLX: reverting to software rendering
[ 186.951] (II) AIGLX: Screen 0 is not DRI capable
[ 186.952] (EE) AIGLX error: dlopen of /usr/lib/x86_64-linux-gnu/dri/swrast_dri.so failed (/usr/lib/x86_64-linux-gnu/dri/swrast_dri.so: cannot open shared object file: No such file or directory)
[ 186.952] (EE) GLX: could not load software renderer
[ 186.952] (II) GLX: no usable GL providers found for screen 0
[ 186.952] (II) intel(0): Setting screen physical size to 338 x 270
[ 187.239] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 187.239] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 187.239] (II) LoadModule: "evdev"
[ 187.240] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 187.256] (II) Module evdev: vendor="X.Org Foundation"
[ 187.256] compiled for 1.11.0, module version = 2.6.0
[ 187.256] Module class: X.Org XInput Driver
[ 187.256] ABI class: X.Org XInput driver, version 13.0
[ 187.256] (II) Using input driver 'evdev' for 'Power Button'
[ 187.256] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 187.256] (**) Power Button: always reports core events
[ 187.256] (**) Power Button: Device: "/dev/input/event1"
[ 187.256] (--) Power Button: Found keys
[ 187.256] (II) Power Button: Configuring as keyboard
[ 187.256] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 187.256] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 187.257] (**) Option "xkb_rules" "evdev"
[ 187.257] (**) Option "xkb_model" "pc105"
[ 187.257] (**) Option "xkb_layout" "us"
[ 187.257] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 187.257] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 187.257] (II) Using input driver 'evdev' for 'Power Button'
[ 187.257] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 187.257] (**) Power Button: always reports core events
[ 187.257] (**) Power Button: Device: "/dev/input/event0"
[ 187.258] (--) Power Button: Found keys
[ 187.258] (II) Power Button: Configuring as keyboard
[ 187.258] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 187.258] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 187.258] (**) Option "xkb_rules" "evdev"
[ 187.258] (**) Option "xkb_model" "pc105"
[ 187.258] (**) Option "xkb_layout" "us"
[ 187.258] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event2)
[ 187.258] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 187.258] (II) Using input driver 'evdev' for 'Logitech Logitech USB Keyboard'
[ 187.259] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 187.259] (**) Logitech Logitech USB Keyboard: always reports core events
[ 187.259] (**) Logitech Logitech USB Keyboard: Device: "/dev/input/event2"
[ 187.259] (--) Logitech Logitech USB Keyboard: Found keys
[ 187.259] (II) Logitech Logitech USB Keyboard: Configuring as keyboard
[ 187.259] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2/event2"
[ 187.259] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD, id 8)
[ 187.259] (**) Option "xkb_rules" "evdev"
[ 187.259] (**) Option "xkb_model" "pc105"
[ 187.259] (**) Option "xkb_layout" "us"
[ 187.260] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event3)
[ 187.260] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 187.260] (II) Using input driver 'evdev' for 'Logitech Logitech USB Keyboard'
[ 187.260] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 187.260] (**) Logitech Logitech USB Keyboard: always reports core events
[ 187.260] (**) Logitech Logitech USB Keyboard: Device: "/dev/input/event3"
[ 187.260] (--) Logitech Logitech USB Keyboard: Found keys
[ 187.260] (II) Logitech Logitech USB Keyboard: Configuring as keyboard
[ 187.260] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input3/event3"
[ 187.260] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD, id 9)
[ 187.260] (**) Option "xkb_rules" "evdev"
[ 187.260] (**) Option "xkb_model" "pc105"
[ 187.260] (**) Option "xkb_layout" "us"
[ 187.261] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 187.261] (II) No input driver/identifier specified (ignoring)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20120118/9726d4a3/attachment.sig>
More information about the coreboot
mailing list