[coreboot] one of those please - reports...

3days dayscondor at gmail.com
Sat Feb 18 19:00:36 CET 2012


miro:~/sysinfo# msrtool > msrtool.log
msrtool 4091
Detected target K8: AMD K8 Family

Unable to detect the current operating system!
On Linux, please do 'modprobe msr' and retry.
Please send a report or patch to coreboot at coreboot.org. Thanks for your
help!

miro:~/sysinfo# modprobe msr
WARNING: All config files need .conf: /etc/modprobe.d/kqemu, it will be
ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/OLD_oss-compat, it
will be ignored in a future release.
WARNING: All config files need .conf:
/etc/modprobe.d/OLD_linux-sound-base_noOSS, it will be ignored in a future
release.

miro:~/sysinfo# msrtool > msrtool.log
msrtool 4091
Detected system linux: Linux with /dev/cpu/*/msr
Detected target K8: AMD K8 Family

Debian Linux OS:
Linux miro 3.2.0-1-amd64 #1 SMP Sun Feb 5 15:17:15 UTC 2012 x86_64 GNU/Linux


miro:~/sysinfo# cat msrtool.log
syntax: msrtool [-hvqrkl] [-c cpu] [-m system] [-t target ...]
     [-i addr=hi[:]lo] | [-s file] | [-d [:]file] | addr...
  -h     show this help text
  -v     be verbose
  -q     be quiet (overrides -v)
  -r     include [Reserved] values
  -k     list all known systems and targets
  -l     list MSRs and bit fields for current target(s) (-kl for ALL
targets!)
  -c     access MSRs on the specified CPU, default=0
  -m     force a system, e.g: -m linux
  -t     force a target, can be used multiple times, e.g: -t geodelx -t
cs5536
  -i     immediate mode
     decode hex addr=hi:lo for the target without reading hw value
     e.g: -i 4c00000f=f2f100ff56960004
  -s     stream mode
     read one MSR address per line and append current hw value to the line
     use the filename - for stdin/stdout
     using -l -s ignores input and will output all MSRs with values
  -d     diff mode
     read one address and value per line and compare with current hw value,
     printing differences to stdout. use the filename - to read from stdin
     use :file or :- to reverse diff, normally hw values are considered new
  addr.. direct mode, read and decode values for the given MSR address(es)

No mode or address(es) specified!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20120218/6138f469/attachment.html>


More information about the coreboot mailing list