No subject

Sun Dec 9 17:34:17 CET 2012

LV2 — Level 2 Register
I/O Address: PMBASE + 14h
Reads to this register return all 0s, writes to this register have no
effect. Reads to this
register generate a “enter a level 2 power state” (C2) to the clock
control logic. This will
cause the STPCLK# signal to go active, and stay active until a break
event occurs.
Throttling (due either to THTL_EN or FORCE_THTL) will be ignored.
NOTE: This register should not be used by IA-64 processors or systems
with more than 1 logical
      processor, unless appropriate semaphoring software has been put in
place to ensure that
      all threads/processors are ready for the C2 state when the read to
this register occurs.

The subsequent byte registers are LV3, LV4, LV5 and for mobile version
LV6 intended for entering C3, C4, C5 and C6 states.

Andriy Gapon

More information about the coreboot mailing list