[coreboot] Asus M5A88-v evo

[Jonathan Bennett]

I've done a bit of looking, and found the code in question. It looks
like the code is trying to figure out what family10 proc it is. The
only problem, it's running a bulldozer processor. cpuinfo lists it as
a family 21. Are the fx family processors supported at all?

~Jonathan


>That's pretty clear. I suggest to boot with factory BIOS, check the
>exact parameters of the CPU, look at the code which is being run, and
>look for relevant documentation for your CPU in the scope of that
>code.

>If you are lucky you only need to add a few values from the
>documentation to tables in the code.


>//Peter
>On Tue, Apr 3, 2012 at 5:24 PM, Jonathan Bennett <jbscience87 at gmail.com> wrote:
>> On Tue, Mar 20, 2012 at 4:36 PM, Julian Shulika <hercares at gmail.com> wrote:
>>> Could you please show log from serial,your board has com port.
>> Finally got a couple spare flash chips and a way to capture the serial output.
>>
>> coreboot-4.0-2227-g4a2daf6 Tue Apr  3 15:29:40 CDT 2012 starting...
>>
>> BSP Family_Model: 00600f12
>> *sysinfo range: [000cc000,000cf360]
>> bsp_apicid = 00
>> cpu_init_detectedx = 00000000
>> microcode: rev id not foung, Skipping microcode patch!
>> POST: 0x33
>> cpuSetAMDMSR FIXME! CPU Version unknown or not supported!
>> FIXME! CPU Version unknown or not supported!
>> FIXME! CPU Version unknown or not supported!
>>  done
>> POST: 0x34
>> Enter amd_ht_init()