[coreboot] Patch set updated for coreboot: 8ef54d0 mainboard: add avalue/eax-785 ITX mainboard

Kerry She (shekairui@gmail.com) gerrit at coreboot.org
Thu Sep 8 15:18:06 CEST 2011


Kerry She (shekairui at gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/208

-gerrit

commit 8ef54d0e84cdf9959c209815f511802a9cf230e1
Author: Kerry She <shekairui at gmail.com>
Date:   Thu Sep 8 21:16:19 2011 +0800

    mainboard: add avalue/eax-785 ITX mainboard
    
    It's AM3 Socket, 880M + SB850 chipset, similar with advansus/a785e-i.
    Onboard device UART, VGA, SATA, PCI Slot, 2 X16 PCIe slot, 4 X1 Pcie
    slot, Lan, audio, PS2 keyboard/mouse and USB are verified.
    
    Change-Id: I483363f5ff9fbfc5cda2f0521660751212f3e326
    Signed-off-by: Kerry She <kerry.she at amd.com>
    Signed-off-by: Kerry She <shekairui at gmail.com>
---
 src/mainboard/Kconfig                          |    3 +
 src/mainboard/avalue/Kconfig                   |   35 +
 src/mainboard/avalue/eax-785e/Kconfig          |  108 ++
 src/mainboard/avalue/eax-785e/Makefile.inc     |   18 +
 src/mainboard/avalue/eax-785e/acpi/cpstate.asl |   75 +
 src/mainboard/avalue/eax-785e/acpi/ide.asl     |  244 ++++
 src/mainboard/avalue/eax-785e/acpi/routing.asl |  398 ++++++
 src/mainboard/avalue/eax-785e/acpi/sata.asl    |  149 ++
 src/mainboard/avalue/eax-785e/acpi/usb.asl     |  161 +++
 src/mainboard/avalue/eax-785e/acpi_tables.c    |  274 ++++
 src/mainboard/avalue/eax-785e/chip.h           |   22 +
 src/mainboard/avalue/eax-785e/cmos.layout      |   98 ++
 src/mainboard/avalue/eax-785e/devicetree.cb    |  111 ++
 src/mainboard/avalue/eax-785e/dsdt.asl         | 1824 ++++++++++++++++++++++++
 src/mainboard/avalue/eax-785e/fadt.c           |  188 +++
 src/mainboard/avalue/eax-785e/get_bus_conf.c   |  154 ++
 src/mainboard/avalue/eax-785e/irq_tables.c     |  111 ++
 src/mainboard/avalue/eax-785e/mainboard.c      |  148 ++
 src/mainboard/avalue/eax-785e/mb_sysconf.h     |   43 +
 src/mainboard/avalue/eax-785e/mptable.c        |  158 ++
 src/mainboard/avalue/eax-785e/platform_cfg.h   |  235 +++
 src/mainboard/avalue/eax-785e/reset.c          |   63 +
 src/mainboard/avalue/eax-785e/resourcemap.c    |  278 ++++
 src/mainboard/avalue/eax-785e/romstage.c       |  266 ++++
 24 files changed, 5164 insertions(+), 0 deletions(-)

diff --git a/src/mainboard/Kconfig b/src/mainboard/Kconfig
index ed00318..13032a6 100644
--- a/src/mainboard/Kconfig
+++ b/src/mainboard/Kconfig
@@ -26,6 +26,8 @@ config VENDOR_ASUS
 	bool "ASUS"
 config VENDOR_A_TREND
 	bool "A-Trend"
+config VENDOR_AVALUE
+	bool "AVALUE"
 config VENDOR_AXUS
 	bool "AXUS"
 config VENDOR_AZZA
@@ -134,6 +136,7 @@ source "src/mainboard/artecgroup/Kconfig"
 source "src/mainboard/asi/Kconfig"
 source "src/mainboard/asrock/Kconfig"
 source "src/mainboard/asus/Kconfig"
+source "src/mainboard/avalue/Kconfig"
 source "src/mainboard/axus/Kconfig"
 source "src/mainboard/azza/Kconfig"
 source "src/mainboard/bcom/Kconfig"
diff --git a/src/mainboard/avalue/Kconfig b/src/mainboard/avalue/Kconfig
new file mode 100644
index 0000000..47e3486
--- /dev/null
+++ b/src/mainboard/avalue/Kconfig
@@ -0,0 +1,35 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2011 Advanced Micro Devices, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+if VENDOR_AVALUE
+
+choice
+	prompt "Mainboard model"
+
+config BOARD_AVALUE_EAX_785E
+	bool "EAX-785E"
+
+endchoice
+
+source "src/mainboard/avalue/eax-785e/Kconfig"
+
+config MAINBOARD_VENDOR
+	string
+	default "AVALUE"
+
+endif # VENDOR_AVALUE
diff --git a/src/mainboard/avalue/eax-785e/Kconfig b/src/mainboard/avalue/eax-785e/Kconfig
new file mode 100644
index 0000000..7aa90c8
--- /dev/null
+++ b/src/mainboard/avalue/eax-785e/Kconfig
@@ -0,0 +1,108 @@
+if BOARD_AVALUE_EAX_785E
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+	select ARCH_X86
+	select CPU_AMD_SOCKET_AM3
+	select DIMM_DDR3
+	select DIMM_REGISTERED
+	select QRANK_DIMM_SUPPORT
+	select NORTHBRIDGE_AMD_AMDFAM10
+	select SOUTHBRIDGE_AMD_RS780
+	select SOUTHBRIDGE_AMD_CIMX_SB800
+	select SUPERIO_WINBOND_W83627HF #COM1, COM2
+	#select SUPERIO_FINTEK_F81216AD #COM3, COM4
+	select SB_SUPERIO_HWM
+	select HAVE_BUS_CONFIG
+	select HAVE_OPTION_TABLE
+	select HAVE_PIRQ_TABLE
+	select HAVE_MAINBOARD_RESOURCES
+	select HAVE_HARD_RESET
+	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
+	select LIFT_BSP_APIC_ID
+	select SERIAL_CPU_INIT
+	select AMDMCT
+	select HAVE_MP_TABLE
+	select HAVE_ACPI_TABLES
+	select BOARD_HAS_FADT
+	select BOARD_ROMSIZE_KB_2048
+	select RAMINIT_SYSINFO
+	select ENABLE_APIC_EXT_ID
+	select TINY_BOOTBLOCK
+	select GFXUMA
+	select HAVE_DEBUG_CAR
+	select SET_FIDVID
+
+config MAINBOARD_DIR
+	string
+	default avalue/eax-785e
+
+config APIC_ID_OFFSET
+	hex
+	default 0x0
+
+config MAINBOARD_PART_NUMBER
+	string
+	default "EAX-785E"
+
+config HW_MEM_HOLE_SIZEK
+	hex
+	default 0x100000
+
+config MAX_CPUS
+	int
+	default 8
+
+config MAX_PHYSICAL_CPUS
+	int
+	default 1
+
+config HW_MEM_HOLE_SIZE_AUTO_INC
+	bool
+	default n
+
+config MEM_TRAIN_SEQ
+	int
+	default 2
+
+config SB_HT_CHAIN_ON_BUS0
+	int
+	default 1
+
+config HT_CHAIN_END_UNITID_BASE
+	hex
+	default 0x1
+
+config HT_CHAIN_UNITID_BASE
+	hex
+	default 0x0
+
+config IRQ_SLOT_COUNT
+	int
+	default 11
+
+config AMD_UCODE_PATCH_FILE
+	string
+	default "mc_patch_010000b6.h"
+
+config RAMTOP
+	hex
+	default 0x2000000
+
+config HEAP_SIZE
+	hex
+	default 0xc0000
+
+config RAMBASE
+	hex
+	default 0x200000
+
+config VGA_BIOS_ID
+        string
+        default "1002,9712"
+
+config SIO_PORT
+        hex
+        default 0x2E
+
+endif #BOARD_AVALUE_EAX_785E
diff --git a/src/mainboard/avalue/eax-785e/Makefile.inc b/src/mainboard/avalue/eax-785e/Makefile.inc
new file mode 100644
index 0000000..737bb1c
--- /dev/null
+++ b/src/mainboard/avalue/eax-785e/Makefile.inc
@@ -0,0 +1,18 @@
+#romstage-y += reset.c #FIXME romstage have include test_rest.c
+
+ramstage-y += reset.c
+
+#SB800 CIMx share AGESA V5 lib code
+ifneq ($(CONFIG_AMD_AGESA),y)
+ AGESA_ROOT ?= src/vendorcode/amd/agesa/f14
+ romstage-y += ../../../../$(AGESA_ROOT)/Lib/amdlib.c
+ ramstage-y += ../../../../$(AGESA_ROOT)/Lib/amdlib.c
+
+ AGESA_INC := -I$(AGESA_ROOT)/ \
+	      -I$(AGESA_ROOT)/Include \
+	      -I$(AGESA_ROOT)/Proc/IDS/ \
+	      -I$(AGESA_ROOT)/Proc/CPU/ \
+	      -I$(AGESA_ROOT)/Proc/CPU/Family
+
+ CFLAGS += $(AGESA_INC)
+endif
diff --git a/src/mainboard/avalue/eax-785e/acpi/cpstate.asl b/src/mainboard/avalue/eax-785e/acpi/cpstate.asl
new file mode 100644
index 0000000..5eca9cc
--- /dev/null
+++ b/src/mainboard/avalue/eax-785e/acpi/cpstate.asl
@@ -0,0 +1,75 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* This file defines the processor and performance state capability
+ * for each core in the system.  It is included into the DSDT for each
+ * core.  It assumes that each core of the system has the same performance
+ * characteristics.
+*/
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001)
+	{
+		Scope (\_PR) {
+		Processor(CPU0,0,0x808,0x06) {
+			#include "cpstate.asl"
+		}
+		Processor(CPU1,1,0x0,0x0) {
+			#include "cpstate.asl"
+		}
+		Processor(CPU2,2,0x0,0x0) {
+			#include "cpstate.asl"
+		}
+		Processor(CPU3,3,0x0,0x0) {
+			#include "cpstate.asl"
+		}
+	}
+*/
+	/* P-state support: The maximum number of P-states supported by the */
+	/* CPUs we'll use is 6. */
+	/* Get from AMI BIOS. */
+	Name(_PSS, Package(){
+		Package ()
+		{
+		    0x00000AF0,
+		    0x0000BF81,
+		    0x00000002,
+		    0x00000002,
+		    0x00000000,
+		    0x00000000
+		},
+
+		Package ()
+		{
+		    0x00000578,
+		    0x000076F2,
+		    0x00000002,
+		    0x00000002,
+		    0x00000001,
+		    0x00000001
+		}
+	})
+
+	Name(_PCT, Package(){
+		ResourceTemplate(){Register(FFixedHW, 0, 0, 0)},
+		ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}
+	})
+
+	Method(_PPC, 0){
+		Return(0)
+	}
diff --git a/src/mainboard/avalue/eax-785e/acpi/ide.asl b/src/mainboard/avalue/eax-785e/acpi/ide.asl
new file mode 100644
index 0000000..c79c18c
--- /dev/null
+++ b/src/mainboard/avalue/eax-785e/acpi/ide.asl
@@ -0,0 +1,244 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*
+Scope (_SB) {
+	Device(PCI0) {
+		Device(IDEC) {
+			Name(_ADR, 0x00140001)
+			#include "ide.asl"
+		}
+	}
+}
+*/
+
+/* Some timing tables */
+Name(UDTT, Package(){ /* Udma timing table */
+	120, 90, 60, 45, 30, 20, 15, 0	/* UDMA modes 0 -> 6 */
+})
+
+Name(MDTT, Package(){ /* MWDma timing table */
+	480, 150, 120, 0	/* Legacy DMA modes 0 -> 2 */
+})
+
+Name(POTT, Package(){ /* Pio timing table */
+	600, 390, 270, 180, 120, 0	/* PIO modes 0 -> 4 */
+})
+
+/* Some timing register value tables */
+Name(MDRT, Package(){ /* MWDma timing register table */
+	0x77, 0x21, 0x20, 0xFF	/* Legacy DMA modes 0 -> 2 */
+})
+
+Name(PORT, Package(){
+	0x99, 0x47, 0x34, 0x22, 0x20, 0x99	/* PIO modes 0 -> 4 */
+})
+
+OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */
+	Field(ICRG, AnyAcc, NoLock, Preserve)
+{
+	PPTS, 8,	/* Primary PIO Slave Timing */
+	PPTM, 8,	/* Primary PIO Master Timing */
+	OFFSET(0x04), PMTS, 8,	/* Primary MWDMA Slave Timing */
+	PMTM, 8,	/* Primary MWDMA Master Timing */
+	OFFSET(0x08), PPCR, 8,	/* Primary PIO Control */
+	OFFSET(0x0A), PPMM, 4,	/* Primary PIO master Mode */
+	PPSM, 4,	/* Primary PIO slave Mode */
+	OFFSET(0x14), PDCR, 2,	/* Primary UDMA Control */
+	OFFSET(0x16), PDMM, 4,	/* Primary UltraDMA Mode */
+	PDSM, 4,	/* Primary UltraDMA Mode */
+}
+
+Method(GTTM, 1) /* get total time*/
+{
+	Store(And(Arg0, 0x0F), Local0)	/* Recovery Width */
+	Increment(Local0)
+	Store(ShiftRight(Arg0, 4), Local1)	/* Command Width */
+	Increment(Local1)
+	Return(Multiply(30, Add(Local0, Local1)))
+}
+
+Device(PRID)
+{
+	Name (_ADR, Zero)
+	Method(_GTM, 0)
+	{
+		NAME(OTBF, Buffer(20) { /* out buffer */
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
+		})
+
+		CreateDwordField(OTBF, 0, PSD0)   /* PIO spd0 */
+		CreateDwordField(OTBF, 4, DSD0)   /* DMA spd0 */
+		CreateDwordField(OTBF, 8, PSD1)   /* PIO spd1 */
+		CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */
+		CreateDwordField(OTBF, 16, BFFG) /* buffer flags */
+
+		/* Just return if the channel is disabled */
+		If(And(PPCR, 0x01)) { /* primary PIO control */
+			Return(OTBF)
+		}
+
+		/* Always tell them independent timing available and IOChannelReady used on both drives */
+		Or(BFFG, 0x1A, BFFG)
+
+		Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming  to PIO spd0 */
+		Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing  to PIO spd1 */
+
+		If(And(PDCR, 0x01)) {	/* It's under UDMA mode */
+			Or(BFFG, 0x01, BFFG)
+			Store(DerefOf(Index(UDTT, PDMM)), DSD0)
+		}
+		Else {
+			Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing,  DmaSpd0 */
+		}
+
+		If(And(PDCR, 0x02)) {	/* It's under UDMA mode */
+			Or(BFFG, 0x04, BFFG)
+			Store(DerefOf(Index(UDTT, PDSM)), DSD1)
+		}
+		Else {
+			Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing,  DmaSpd0 */
+		}
+
+		Return(OTBF) /* out buffer */
+	}				/* End Method(_GTM) */
+
+	Method(_STM, 3, NotSerialized)
+	{
+		NAME(INBF, Buffer(20) { /* in buffer */
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
+		})
+
+		CreateDwordField(INBF, 0, PSD0)    /* PIO spd0 */
+		CreateDwordField(INBF, 4, DSD0)   /* PIO spd0 */
+		CreateDwordField(INBF, 8, PSD1)   /* PIO spd1 */
+		CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */
+		CreateDwordField(INBF, 16, BFFG) /*buffer flag */
+
+		Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0)
+		Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */
+		Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1)
+		Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */
+
+		Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */
+		Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */
+
+		If(And(BFFG, 0x01)) {	/* Drive 0 is under UDMA mode */
+			Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0)
+			Divide(Local0, 7, PDMM,)
+			Or(PDCR, 0x01, PDCR)
+		}
+		Else {
+			If(LNotEqual(DSD0, 0xFFFFFFFF)) {
+				Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0)
+				Store(DerefOf(Index(MDRT, Local0)), PMTM)
+			}
+		}
+
+		If(And(BFFG, 0x04)) {	/* Drive 1 is under UDMA mode */
+			Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0)
+			Divide(Local0, 7, PDSM,)
+			Or(PDCR, 0x02, PDCR)
+		}
+		Else {
+			If(LNotEqual(DSD1, 0xFFFFFFFF)) {
+				Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0)
+				Store(DerefOf(Index(MDRT, Local0)), PMTS)
+			}
+		}
+		/* Return(INBF) */
+	}		/*End Method(_STM) */
+	Device(MST)
+	{
+		Name(_ADR, 0)
+		Method(_GTF) {
+			Name(CMBF, Buffer(21) {
+				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+				0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
+			})
+			CreateByteField(CMBF, 1, POMD)
+			CreateByteField(CMBF, 8, DMMD)
+			CreateByteField(CMBF, 5, CMDA)
+			CreateByteField(CMBF, 12, CMDB)
+			CreateByteField(CMBF, 19, CMDC)
+
+			Store(0xA0, CMDA)
+			Store(0xA0, CMDB)
+			Store(0xA0, CMDC)
+
+			Or(PPMM, 0x08, POMD)
+
+			If(And(PDCR, 0x01)) {
+				Or(PDMM, 0x40, DMMD)
+			}
+			Else {
+				Store(Match
+				      (MDTT, MLE, GTTM(PMTM),
+				       MTR, 0, 0), Local0)
+				If(LLess(Local0, 3)) {
+					Or(0x20, Local0, DMMD)
+				}
+			}
+			Return(CMBF)
+		}
+	}		/* End Device(MST) */
+
+	Device(SLAV)
+	{
+		Name(_ADR, 1)
+		Method(_GTF) {
+			Name(CMBF, Buffer(21) {
+				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+				0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
+			})
+			CreateByteField(CMBF, 1, POMD)
+			CreateByteField(CMBF, 8, DMMD)
+			CreateByteField(CMBF, 5, CMDA)
+			CreateByteField(CMBF, 12, CMDB)
+			CreateByteField(CMBF, 19, CMDC)
+
+			Store(0xB0, CMDA)
+			Store(0xB0, CMDB)
+			Store(0xB0, CMDC)
+
+			Or(PPSM, 0x08, POMD)
+
+			If(And(PDCR, 0x02)) {
+				Or(PDSM, 0x40, DMMD)
+			}
+			Else {
+				Store(Match
+				      (MDTT, MLE, GTTM(PMTS),
+				       MTR, 0, 0), Local0)
+				If(LLess(Local0, 3)) {
+					Or(0x20, Local0, DMMD)
+				}
+			}
+			Return(CMBF)
+		}
+	}			/* End Device(SLAV) */
+}
diff --git a/src/mainboard/avalue/eax-785e/acpi/routing.asl b/src/mainboard/avalue/eax-785e/acpi/routing.asl
new file mode 100644
index 0000000..cb50394
--- /dev/null
+++ b/src/mainboard/avalue/eax-785e/acpi/routing.asl
@@ -0,0 +1,398 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+		)
+	{
+		#include "routing.asl"
+	}
+*/
+
+/* Routing is in System Bus scope */
+Scope(\_SB) {
+	Name(PR0, Package(){
+		/* NB devices */
+		/* Bus 0, Dev 0 - RS780 Host Controller */
+		/* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */
+		/* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */
+		Package(){0x0002FFFF, 0, INTC, 0 },
+		Package(){0x0002FFFF, 1, INTD, 0 },
+		Package(){0x0002FFFF, 2, INTA, 0 },
+		Package(){0x0002FFFF, 3, INTB, 0 },
+		/* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
+		/* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
+		Package(){0x0004FFFF, 0, INTA, 0 },
+		Package(){0x0004FFFF, 1, INTB, 0 },
+		Package(){0x0004FFFF, 2, INTC, 0 },
+		Package(){0x0004FFFF, 3, INTD, 0 },
+		/* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
+		/* Package(){0x0005FFFF, 0, INTB, 0 }, */
+		/* Package(){0x0005FFFF, 1, INTC, 0 }, */
+		/* Package(){0x0005FFFF, 2, INTD, 0 }, */
+		/* Package(){0x0005FFFF, 3, INTA, 0 }, */
+		/* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */
+		Package(){0x0006FFFF, 0, INTC, 0 },
+		Package(){0x0006FFFF, 1, INTD, 0 },
+		Package(){0x0006FFFF, 2, INTA, 0 },
+		Package(){0x0006FFFF, 3, INTB, 0 },
+		/* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */
+		Package(){0x0007FFFF, 0, INTD, 0 },
+		Package(){0x0007FFFF, 1, INTA, 0 },
+		Package(){0x0007FFFF, 2, INTB, 0 },
+		Package(){0x0007FFFF, 3, INTC, 0 },
+
+		Package(){0x0009FFFF, 0, INTB, 0 },
+		Package(){0x0009FFFF, 1, INTC, 0 },
+		Package(){0x0009FFFF, 2, INTD, 0 },
+		Package(){0x0009FFFF, 3, INTA, 0 },
+
+		Package(){0x000AFFFF, 0, INTC, 0 },
+		Package(){0x000AFFFF, 1, INTD, 0 },
+		Package(){0x000AFFFF, 2, INTA, 0 },
+		Package(){0x000AFFFF, 3, INTB, 0 },
+
+		Package(){0x000BFFFF, 0, INTD, 0 },
+		Package(){0x000BFFFF, 1, INTA, 0 },
+		Package(){0x000BFFFF, 2, INTB, 0 },
+		Package(){0x000BFFFF, 3, INTC, 0 },
+
+		Package(){0x000CFFFF, 0, INTA, 0 },
+		Package(){0x000CFFFF, 1, INTB, 0 },
+		Package(){0x000CFFFF, 2, INTC, 0 },
+		Package(){0x000CFFFF, 3, INTD, 0 },
+
+		/* Bus 0, Funct 8 - Southbridge port (normally hidden) */
+
+		/* SB devices */
+		/* Bus 0, Dev 17 - SATA controller #2 */
+		/* Bus 0, Dev 18 - SATA controller #1 */
+		Package(){0x0011FFFF, 0, INTD, 0 },
+
+		/* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5;
+		 * EHCI, dev 18, 19 func 2 */
+		Package(){0x0012FFFF, 0, INTC, 0 },
+		Package(){0x0012FFFF, 1, INTB, 0 },
+
+		Package(){0x0013FFFF, 0, INTC, 0 },
+		Package(){0x0013FFFF, 1, INTB, 0 },
+
+		Package(){0x0016FFFF, 0, INTC, 0 },
+		Package(){0x0016FFFF, 1, INTB, 0 },
+
+		/* Package(){0x0014FFFF, 1, INTA, 0 }, */
+
+		/* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */
+		Package(){0x0014FFFF, 0, INTA, 0 },
+		Package(){0x0014FFFF, 1, INTB, 0 },
+		Package(){0x0014FFFF, 2, INTC, 0 },
+		Package(){0x0014FFFF, 3, INTD, 0 },
+
+		Package(){0x0015FFFF, 0, INTA, 0 },
+		Package(){0x0015FFFF, 1, INTB, 0 },
+		Package(){0x0015FFFF, 2, INTC, 0 },
+		Package(){0x0015FFFF, 3, INTD, 0 },
+	})
+
+	Name(APR0, Package(){
+		/* NB devices in APIC mode */
+		/* Bus 0, Dev 0 - RS780 Host Controller */
+
+		/* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */
+		Package(){0x0001FFFF, 0, 0, 18 },
+		package(){0x0001FFFF, 1, 0, 19 },
+
+		/* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */
+		Package(){0x0002FFFF, 0, 0, 18 },
+		/* Package(){0x0002FFFF, 1, 0, 19 }, */
+		/* Package(){0x0002FFFF, 2, 0, 16 }, */
+		/* Package(){0x0002FFFF, 3, 0, 17 }, */
+
+		/* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
+		Package(){0x0003FFFF, 0, 0, 19 },
+
+		/* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
+		Package(){0x0004FFFF, 0, 0, 16 },
+		/* Package(){0x0004FFFF, 1, 0, 17 }, */
+		/* Package(){0x0004FFFF, 2, 0, 18 }, */
+		/* Package(){0x0004FFFF, 3, 0, 19 }, */
+
+		/* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
+		/* Package(){0x0005FFFF, 0, 0, 17 }, */
+		/* Package(){0x0005FFFF, 1, 0, 18 }, */
+		/* Package(){0x0005FFFF, 2, 0, 19 }, */
+		/* Package(){0x0005FFFF, 3, 0, 16 }, */
+
+		/* Bus 0, Dev 6 - General purpose PCIe bridge 6 */
+		/* Package(){0x0006FFFF, 0, 0, 18 }, */
+		/* Package(){0x0006FFFF, 1, 0, 19 }, */
+		/* Package(){0x0006FFFF, 2, 0, 16 }, */
+		/* Package(){0x0006FFFF, 3, 0, 17 }, */
+
+		/* Bus 0, Dev 7 - PCIe Bridge for network card */
+		/* Package(){0x0007FFFF, 0, 0, 19 }, */
+		/* Package(){0x0007FFFF, 1, 0, 16 }, */
+		/* Package(){0x0007FFFF, 2, 0, 17 }, */
+		/* Package(){0x0007FFFF, 3, 0, 18 }, */
+
+		/* Bus 0, Dev 9 - PCIe Bridge for network card */
+		Package(){0x0009FFFF, 0, 0, 17 },
+		/* Package(){0x0009FFFF, 1, 0, 16 }, */
+		/* Package(){0x0009FFFF, 2, 0, 17 }, */
+		/* Package(){0x0009FFFF, 3, 0, 18 }, */
+		/* Bus 0, Dev A - PCIe Bridge for network card */
+		Package(){0x000AFFFF, 0, 0, 18 },
+		/* Package(){0x000AFFFF, 1, 0, 16 }, */
+		/* Package(){0x000AFFFF, 2, 0, 17 }, */
+		/* Package(){0x000AFFFF, 3, 0, 18 }, */
+		/* Bus 0, Funct 8 - Southbridge port (normally hidden) */
+
+		/* SB devices in APIC mode */
+		/* Bus 0, Dev 17 - SATA controller #2 */
+		/* Bus 0, Dev 18 - SATA controller #1 */
+		Package(){0x0011FFFF, 0, 0, 19 },
+
+		/* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5;
+		 * EHCI, dev 18, 19 func 2 */
+		Package(){0x0012FFFF, 0, 0, 18 },
+		Package(){0x0012FFFF, 1, 0, 17 },
+		/* Package(){0x0012FFFF, 2, 0, 18 }, */
+
+		Package(){0x0013FFFF, 0, 0, 18 },
+		Package(){0x0013FFFF, 1, 0, 17 },
+		/* Package(){0x0013FFFF, 2, 0, 16 }, */
+
+		/* Package(){0x00140000, 0, 0, 16 }, */
+
+		Package(){0x0016FFFF, 0, 0, 18 },
+		Package(){0x0016FFFF, 1, 0, 17 },
+
+		/* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */
+		Package(){0x0014FFFF, 0, 0, 16 },
+		Package(){0x0014FFFF, 1, 0, 17 },
+		Package(){0x0014FFFF, 2, 0, 18 },
+		Package(){0x0014FFFF, 3, 0, 19 },
+		/* Package(){0x00140004, 2, 0, 18 }, */
+		/* Package(){0x00140004, 3, 0, 19 }, */
+		/* Package(){0x00140005, 1, 0, 17 }, */
+		/* Package(){0x00140006, 1, 0, 17 }, */
+
+		/* TODO: pcie */
+		Package(){0x0015FFFF, 0, 0, 16 },
+		Package(){0x0015FFFF, 1, 0, 17 },
+		Package(){0x0015FFFF, 2, 0, 18 },
+		Package(){0x0015FFFF, 3, 0, 19 },
+	})
+
+	Name(PR1, Package(){
+		/* Internal graphics - RS780 VGA, Bus1, Dev5 */
+		Package(){0x0005FFFF, 0, INTA, 0 },
+		Package(){0x0005FFFF, 1, INTB, 0 },
+		Package(){0x0005FFFF, 2, INTC, 0 },
+		Package(){0x0005FFFF, 3, INTD, 0 },
+	})
+	Name(APR1, Package(){
+		/* Internal graphics - RS780 VGA, Bus1, Dev5 */
+		Package(){0x0005FFFF, 0, 0, 18 },
+		Package(){0x0005FFFF, 1, 0, 19 },
+		/* Package(){0x0005FFFF, 2, 0, 20 }, */
+		/* Package(){0x0005FFFF, 3, 0, 17 }, */
+	})
+
+	Name(PS2, Package(){
+		/* The external GFX - Hooked to PCIe slot 2 */
+		Package(){0x0000FFFF, 0, INTC, 0 },
+		Package(){0x0000FFFF, 1, INTD, 0 },
+		Package(){0x0000FFFF, 2, INTA, 0 },
+		Package(){0x0000FFFF, 3, INTB, 0 },
+	})
+	Name(APS2, Package(){
+		/* The external GFX - Hooked to PCIe slot 2 */
+		Package(){0x0000FFFF, 0, 0, 18 },
+		Package(){0x0000FFFF, 1, 0, 19 },
+		Package(){0x0000FFFF, 2, 0, 16 },
+		Package(){0x0000FFFF, 3, 0, 17 },
+	})
+
+	Name(PS4, Package(){
+		/* PCIe slot - Hooked to PCIe slot 4 */
+		Package(){0x0000FFFF, 0, INTA, 0 },
+		Package(){0x0000FFFF, 1, INTB, 0 },
+		Package(){0x0000FFFF, 2, INTC, 0 },
+		Package(){0x0000FFFF, 3, INTD, 0 },
+	})
+	Name(APS4, Package(){
+		/* PCIe slot - Hooked to PCIe slot 4 */
+		Package(){0x0000FFFF, 0, 0, 16 },
+		Package(){0x0000FFFF, 1, 0, 17 },
+		Package(){0x0000FFFF, 2, 0, 18 },
+		Package(){0x0000FFFF, 3, 0, 19 },
+	})
+
+	Name(PS5, Package(){
+		/* PCIe slot - Hooked to PCIe slot 5 */
+		Package(){0x0000FFFF, 0, INTB, 0 },
+		Package(){0x0000FFFF, 1, INTC, 0 },
+		Package(){0x0000FFFF, 2, INTD, 0 },
+		Package(){0x0000FFFF, 3, INTA, 0 },
+	})
+	Name(APS5, Package(){
+		/* PCIe slot - Hooked to PCIe slot 5 */
+		Package(){0x0000FFFF, 0, 0, 17 },
+		Package(){0x0000FFFF, 1, 0, 18 },
+		Package(){0x0000FFFF, 2, 0, 19 },
+		Package(){0x0000FFFF, 3, 0, 16 },
+	})
+
+	Name(PS6, Package(){
+		/* PCIe slot - Hooked to PCIe slot 6 */
+		Package(){0x0000FFFF, 0, INTC, 0 },
+		Package(){0x0000FFFF, 1, INTD, 0 },
+		Package(){0x0000FFFF, 2, INTA, 0 },
+		Package(){0x0000FFFF, 3, INTB, 0 },
+	})
+	Name(APS6, Package(){
+		/* PCIe slot - Hooked to PCIe slot 6 */
+		Package(){0x0000FFFF, 0, 0, 18 },
+		Package(){0x0000FFFF, 1, 0, 19 },
+		Package(){0x0000FFFF, 2, 0, 16 },
+		Package(){0x0000FFFF, 3, 0, 17 },
+	})
+
+	Name(PS7, Package(){
+		/* The onboard Ethernet chip - Hooked to PCIe slot 7 */
+		Package(){0x0000FFFF, 0, INTD, 0 },
+		Package(){0x0000FFFF, 1, INTA, 0 },
+		Package(){0x0000FFFF, 2, INTB, 0 },
+		Package(){0x0000FFFF, 3, INTC, 0 },
+	})
+	Name(APS7, Package(){
+		/* The onboard Ethernet chip - Hooked to PCIe slot 7 */
+		Package(){0x0000FFFF, 0, 0, 19 },
+		Package(){0x0000FFFF, 1, 0, 16 },
+		Package(){0x0000FFFF, 2, 0, 17 },
+		Package(){0x0000FFFF, 3, 0, 18 },
+	})
+
+	Name(PS9, Package(){
+		/* PCIe slot - Hooked to PCIe slot 9 */
+		Package(){0x0000FFFF, 0, INTD, 0 },
+		Package(){0x0000FFFF, 1, INTA, 0 },
+		Package(){0x0000FFFF, 2, INTB, 0 },
+		Package(){0x0000FFFF, 3, INTC, 0 },
+	})
+	Name(APS9, Package(){
+		/* PCIe slot - Hooked to PCIe slot 9 */
+		Package(){0x0000FFFF, 0, 0, 17 },
+		Package(){0x0000FFFF, 1, 0, 18 },
+		Package(){0x0000FFFF, 2, 0, 19 },
+		Package(){0x0000FFFF, 3, 0, 16 },
+	})
+
+	Name(PSa, Package(){
+		/* PCIe slot - Hooked to PCIe slot 10 */
+		Package(){0x0000FFFF, 0, INTD, 0 },
+		Package(){0x0000FFFF, 1, INTA, 0 },
+		Package(){0x0000FFFF, 2, INTB, 0 },
+		Package(){0x0000FFFF, 3, INTC, 0 },
+	})
+	Name(APSa, Package(){
+		/* PCIe slot - Hooked to PCIe slot 10 */
+		Package(){0x0000FFFF, 0, 0, 18 },
+		Package(){0x0000FFFF, 1, 0, 19 },
+		Package(){0x0000FFFF, 2, 0, 16 },
+		Package(){0x0000FFFF, 3, 0, 17 },
+	})
+
+	Name(PE0, Package(){
+		/* PCIe slot - Hooked to PCIe slot 10 */
+		Package(){0x0000FFFF, 0, INTA, 0 },
+		Package(){0x0000FFFF, 1, INTB, 0 },
+		Package(){0x0000FFFF, 2, INTC, 0 },
+		Package(){0x0000FFFF, 3, INTD, 0 },
+	})
+	Name(APE0, Package(){
+		/* PCIe slot - Hooked to PCIe */
+		Package(){0x0000FFFF, 0, 0, 16 },
+		Package(){0x0000FFFF, 1, 0, 17 },
+		Package(){0x0000FFFF, 2, 0, 18 },
+		Package(){0x0000FFFF, 3, 0, 19 },
+	})
+
+	Name(PE1, Package(){
+		/* PCIe slot - Hooked to PCIe slot 10 */
+		Package(){0x0000FFFF, 0, INTB, 0 },
+		Package(){0x0000FFFF, 1, INTC, 0 },
+		Package(){0x0000FFFF, 2, INTD, 0 },
+		Package(){0x0000FFFF, 3, INTA, 0 },
+	})
+	Name(APE1, Package(){
+		/* PCIe slot - Hooked to PCIe */
+		Package(){0x0000FFFF, 0, 0, 17 },
+		Package(){0x0000FFFF, 1, 0, 18 },
+		Package(){0x0000FFFF, 2, 0, 19 },
+		Package(){0x0000FFFF, 3, 0, 16 },
+	})
+
+	Name(PE2, Package(){
+		/* PCIe slot - Hooked to PCIe slot 10 */
+		Package(){0x0000FFFF, 0, INTC, 0 },
+		Package(){0x0000FFFF, 1, INTD, 0 },
+		Package(){0x0000FFFF, 2, INTA, 0 },
+		Package(){0x0000FFFF, 3, INTB, 0 },
+	})
+	Name(APE2, Package(){
+		/* PCIe slot - Hooked to PCIe */
+		Package(){0x0000FFFF, 0, 0, 18 },
+		Package(){0x0000FFFF, 1, 0, 19 },
+		Package(){0x0000FFFF, 2, 0, 16 },
+		Package(){0x0000FFFF, 3, 0, 17 },
+	})
+
+	Name(PE3, Package(){
+		/* PCIe slot - Hooked to PCIe slot 10 */
+		Package(){0x0000FFFF, 0, INTD, 0 },
+		Package(){0x0000FFFF, 1, INTA, 0 },
+		Package(){0x0000FFFF, 2, INTB, 0 },
+		Package(){0x0000FFFF, 3, INTC, 0 },
+	})
+	Name(APE3, Package(){
+		/* PCIe slot - Hooked to PCIe */
+		Package(){0x0000FFFF, 0, 0, 19 },
+		Package(){0x0000FFFF, 1, 0, 16 },
+		Package(){0x0000FFFF, 2, 0, 17 },
+		Package(){0x0000FFFF, 3, 0, 18 },
+	})
+
+	Name(PCIB, Package(){
+		/* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */
+		Package(){0x0005FFFF, 0, 0, 0x14 },
+		Package(){0x0005FFFF, 1, 0, 0x15 },
+		Package(){0x0005FFFF, 2, 0, 0x16 },
+		Package(){0x0005FFFF, 3, 0, 0x17 },
+		Package(){0x0006FFFF, 0, 0, 0x15 },
+		Package(){0x0006FFFF, 1, 0, 0x16 },
+		Package(){0x0006FFFF, 2, 0, 0x17 },
+		Package(){0x0006FFFF, 3, 0, 0x14 },
+		Package(){0x0007FFFF, 0, 0, 0x16 },
+		Package(){0x0007FFFF, 1, 0, 0x17 },
+		Package(){0x0007FFFF, 2, 0, 0x14 },
+		Package(){0x0007FFFF, 3, 0, 0x15 },
+	})
+}
diff --git a/src/mainboard/avalue/eax-785e/acpi/sata.asl b/src/mainboard/avalue/eax-785e/acpi/sata.asl
new file mode 100644
index 0000000..bd4acf0
--- /dev/null
+++ b/src/mainboard/avalue/eax-785e/acpi/sata.asl
@@ -0,0 +1,149 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* simple name description */
+
+/*
+Scope (_SB) {
+	Device(PCI0) {
+		Device(SATA) {
+			Name(_ADR, 0x00110000)
+			#include "sata.asl"
+		}
+	}
+}
+*/
+
+Name(STTM, Buffer(20) {
+	0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+	0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+	0x1f, 0x00, 0x00, 0x00
+})
+
+/* Start by clearing the PhyRdyChg bits */
+Method(_INI) {
+	\_GPE._L1F()
+}
+
+Device(PMRY)
+{
+	Name(_ADR, 0)
+	Method(_GTM, 0x0, NotSerialized) {
+		Return(STTM)
+	}
+	Method(_STM, 0x3, NotSerialized) {}
+
+	Device(PMST) {
+		Name(_ADR, 0)
+		Method(_STA,0) {
+			if (LGreater(P0IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return  (0x00) /* sata is missing */
+			}
+		}
+	}/* end of PMST */
+
+	Device(PSLA)
+	{
+		Name(_ADR, 1)
+		Method(_STA,0) {
+			if (LGreater(P1IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return (0x00) /* sata is missing */
+			}
+		}
+	}	/* end of PSLA */
+}   /* end of PMRY */
+
+
+Device(SEDY)
+{
+	Name(_ADR, 1)		/* IDE Scondary Channel */
+	Method(_GTM, 0x0, NotSerialized) {
+		Return(STTM)
+	}
+	Method(_STM, 0x3, NotSerialized) {}
+
+	Device(SMST)
+	{
+		Name(_ADR, 0)
+		Method(_STA,0) {
+			if (LGreater(P2IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return (0x00) /* sata is missing */
+			}
+		}
+	} /* end of SMST */
+
+	Device(SSLA)
+	{
+		Name(_ADR, 1)
+		Method(_STA,0) {
+			if (LGreater(P3IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return (0x00) /* sata is missing */
+			}
+		}
+	} /* end of SSLA */
+}   /* end of SEDY */
+
+/* SATA Hot Plug Support */
+Scope(\_GPE) {
+	Method(_L1F,0x0,NotSerialized) {
+		if (\_SB.P0PR) {
+			if (LGreater(\_SB.P0IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P0PR)
+		}
+
+		if (\_SB.P1PR) {
+			if (LGreater(\_SB.P1IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P1PR)
+		}
+
+		if (\_SB.P2PR) {
+			if (LGreater(\_SB.P2IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P2PR)
+		}
+
+		if (\_SB.P3PR) {
+			if (LGreater(\_SB.P3IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P3PR)
+		}
+	}
+}
diff --git a/src/mainboard/avalue/eax-785e/acpi/usb.asl b/src/mainboard/avalue/eax-785e/acpi/usb.asl
new file mode 100644
index 0000000..81ea9a2
--- /dev/null
+++ b/src/mainboard/avalue/eax-785e/acpi/usb.asl
@@ -0,0 +1,161 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* simple name description */
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+		)
+	{
+		#include "usb.asl"
+	}
+*/
+Method(UCOC, 0) {
+	Sleep(20)
+	Store(0x13,CMTI)
+	Store(0,GPSL)
+}
+
+/* USB Port 0 overcurrent uses Gpm 0 */
+If(LLessEqual(UOM0,9)) {
+	Scope (\_GPE) {
+		Method (_L13) {
+			UCOC()
+			if(LEqual(GPB0,PLC0)) {
+				Not(PLC0,PLC0)
+				Store(PLC0, \_SB.PT0D)
+			}
+		}
+	}
+}
+
+/* USB Port 1 overcurrent uses Gpm 1 */
+If (LLessEqual(UOM1,9)) {
+	Scope (\_GPE) {
+		Method (_L14) {
+			UCOC()
+			if (LEqual(GPB1,PLC1)) {
+				Not(PLC1,PLC1)
+				Store(PLC1, \_SB.PT1D)
+			}
+		}
+	}
+}
+
+/* USB Port 2 overcurrent uses Gpm 2 */
+If (LLessEqual(UOM2,9)) {
+	Scope (\_GPE) {
+		Method (_L15) {
+			UCOC()
+			if (LEqual(GPB2,PLC2)) {
+				Not(PLC2,PLC2)
+				Store(PLC2, \_SB.PT2D)
+			}
+		}
+	}
+}
+
+/* USB Port 3 overcurrent uses Gpm 3 */
+If (LLessEqual(UOM3,9)) {
+	Scope (\_GPE) {
+		Method (_L16) {
+			UCOC()
+			if (LEqual(GPB3,PLC3)) {
+				Not(PLC3,PLC3)
+				Store(PLC3, \_SB.PT3D)
+			}
+		}
+	}
+}
+
+/* USB Port 4 overcurrent uses Gpm 4 */
+If (LLessEqual(UOM4,9)) {
+	Scope (\_GPE) {
+		Method (_L19) {
+			UCOC()
+			if (LEqual(GPB4,PLC4)) {
+				Not(PLC4,PLC4)
+				Store(PLC4, \_SB.PT4D)
+			}
+		}
+	}
+}
+
+/* USB Port 5 overcurrent uses Gpm 5 */
+If (LLessEqual(UOM5,9)) {
+	Scope (\_GPE) {
+		Method (_L1A) {
+			UCOC()
+			if (LEqual(GPB5,PLC5)) {
+				Not(PLC5,PLC5)
+				Store(PLC5, \_SB.PT5D)
+			}
+		}
+	}
+}
+
+/* USB Port 6 overcurrent uses Gpm 6 */
+If (LLessEqual(UOM6,9)) {
+	Scope (\_GPE) {
+		/* Method (_L1C) { */
+		Method (_L06) {
+			UCOC()
+			if (LEqual(GPB6,PLC6)) {
+				Not(PLC6,PLC6)
+				Store(PLC6, \_SB.PT6D)
+			}
+		}
+	}
+}
+
+/* USB Port 7 overcurrent uses Gpm 7 */
+If (LLessEqual(UOM7,9)) {
+	Scope (\_GPE) {
+		/* Method (_L1D) { */
+		Method (_L07) {
+			UCOC()
+			if (LEqual(GPB7,PLC7)) {
+				Not(PLC7,PLC7)
+				Store(PLC7, \_SB.PT7D)
+			}
+		}
+	}
+}
+
+/* USB Port 8 overcurrent uses Gpm 8 */
+If (LLessEqual(UOM8,9)) {
+	Scope (\_GPE) {
+		Method (_L17) {
+			if (LEqual(G8IS,PLC8)) {
+				Not(PLC8,PLC8)
+				Store(PLC8, \_SB.PT8D)
+			}
+		}
+	}
+}
+
+/* USB Port 9 overcurrent uses Gpm 9 */
+If (LLessEqual(UOM9,9)) {
+	Scope (\_GPE) {
+		Method (_L0E) {
+			if (LEqual(G9IS,0)) {
+			Store(1,\_SB.PT9D)
+			}
+		}
+	}
+}
diff --git a/src/mainboard/avalue/eax-785e/acpi_tables.c b/src/mainboard/avalue/eax-785e/acpi_tables.c
new file mode 100644
index 0000000..7c8ca76
--- /dev/null
+++ b/src/mainboard/avalue/eax-785e/acpi_tables.c
@@ -0,0 +1,274 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <arch/ioapic.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <cpu/amd/amdfam10_sysconf.h>
+
+#include "mb_sysconf.h"
+
+#define DUMP_ACPI_TABLES 0
+
+#if DUMP_ACPI_TABLES == 1
+static void dump_mem(u32 start, u32 end)
+{
+
+	u32 i;
+	print_debug("dump_mem:");
+	for (i = start; i < end; i++) {
+		if ((i & 0xf) == 0) {
+			printk(BIOS_DEBUG, "\n%08x:", i);
+		}
+		printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i));
+	}
+	print_debug("\n");
+}
+#endif
+
+extern const unsigned char AmlCode[];
+extern const unsigned char AmlCode_ssdt[];
+
+#if CONFIG_ACPI_SSDTX_NUM >= 1
+extern const unsigned char AmlCode_ssdt2[];
+extern const unsigned char AmlCode_ssdt3[];
+extern const unsigned char AmlCode_ssdt4[];
+extern const unsigned char AmlCode_ssdt5[];
+#endif
+
+unsigned long acpi_fill_mcfg(unsigned long current)
+{
+	/* Just a dummy */
+	return current;
+}
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+	/* create all subtables for processors */
+	current = acpi_create_madt_lapics(current);
+
+	/* Write SB800 IOAPIC, only one */
+	current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2,
+					   IO_APIC_ADDR, 0);
+
+	current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+						current, 0, 0, 2, 0);
+	current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+						current, 0, 9, 9, 0xF);
+	/* 0: mean bus 0--->ISA */
+	/* 0: PIC 0 */
+	/* 2: APIC 2 */
+	/* 5 mean: 0101 --> Edige-triggered, Active high */
+
+	/* create all subtables for processors */
+	/* current = acpi_create_madt_lapic_nmis(current, 5, 1); */
+	/* 1: LINT1 connect to NMI */
+
+	return current;
+}
+
+unsigned long write_acpi_tables(unsigned long start)
+{
+	unsigned long current;
+	acpi_rsdp_t *rsdp;
+	acpi_rsdt_t *rsdt;
+	acpi_hpet_t *hpet;
+	acpi_madt_t *madt;
+	acpi_srat_t *srat;
+	acpi_slit_t *slit;
+	acpi_fadt_t *fadt;
+	acpi_facs_t *facs;
+	acpi_header_t *dsdt;
+	acpi_header_t *ssdt;
+#if CONFIG_ACPI_SSDTX_NUM >= 1
+	acpi_header_t *ssdtx;
+	void *p;
+	int i;
+#endif
+
+	get_bus_conf();	/* it will get sblk, pci1234, hcdn, and sbdn */
+
+	/* Align ACPI tables to 16 bytes */
+	start = (start + 0x0f) & -0x10;
+	current = start;
+
+	printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start);
+
+	/* We need at least an RSDP and an RSDT Table */
+	rsdp = (acpi_rsdp_t *) current;
+	current += sizeof(acpi_rsdp_t);
+	rsdt = (acpi_rsdt_t *) current;
+	current += sizeof(acpi_rsdt_t);
+
+	/* clear all table memory */
+	memset((void *)start, 0, current - start);
+
+	acpi_write_rsdp(rsdp, rsdt, NULL);
+	acpi_write_rsdt(rsdt);
+
+	/*
+	 * We explicitly add these tables later on:
+	 */
+	current	  = ( current + 0x07) & -0x08;
+	printk(BIOS_DEBUG, "ACPI:    * HPET at %lx\n", current);
+	hpet = (acpi_hpet_t *) current;
+	current += sizeof(acpi_hpet_t);
+	acpi_create_hpet(hpet);
+	acpi_add_table(rsdp, hpet);
+
+	/* If we want to use HPET Timers Linux wants an MADT */
+	current	  = ( current + 0x07) & -0x08;
+	printk(BIOS_DEBUG, "ACPI:    * MADT at %lx\n",current);
+	madt = (acpi_madt_t *) current;
+	acpi_create_madt(madt);
+	current += madt->header.length;
+	acpi_add_table(rsdp, madt);
+
+	/* SRAT */
+	current	  = ( current + 0x07) & -0x08;
+	printk(BIOS_DEBUG, "ACPI:    * SRAT at %lx\n", current);
+	srat = (acpi_srat_t *) current;
+	acpi_create_srat(srat);
+	current += srat->header.length;
+	acpi_add_table(rsdp, srat);
+
+	/* SLIT */
+	current	  = ( current + 0x07) & -0x08;
+	printk(BIOS_DEBUG, "ACPI:   * SLIT at %lx\n", current);
+	slit = (acpi_slit_t *) current;
+	acpi_create_slit(slit);
+	current += slit->header.length;
+	acpi_add_table(rsdp, slit);
+
+	/* SSDT */
+	current	  = ( current + 0x0f) & -0x10;
+	printk(BIOS_DEBUG, "ACPI:    * SSDT at %lx\n", current);
+	ssdt = (acpi_header_t *)current;
+	memcpy(ssdt, &AmlCode_ssdt, sizeof(acpi_header_t));
+	current += ssdt->length;
+	memcpy(ssdt, &AmlCode_ssdt, ssdt->length);
+	//Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c
+	update_ssdt((void*)ssdt);
+	/* recalculate checksum */
+	ssdt->checksum = 0;
+	ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length);
+	acpi_add_table(rsdp,ssdt);
+
+	printk(BIOS_DEBUG, "ACPI:    * SSDT for PState at %lx\n", current);
+	current = acpi_add_ssdt_pstates(rsdp, current);
+
+#if CONFIG_ACPI_SSDTX_NUM >= 1
+
+	/* same htio, but different position? We may have to copy,
+	change HCIN, and recalculate the checknum and add_table */
+
+	for(i=1;i<sysconf.hc_possible_num;i++) {  // 0: is hc sblink
+		if((sysconf.pci1234[i] & 1) != 1 ) continue;
+		u8 c;
+		if (i < 7) {
+			c = (u8) ('4' + i - 1);
+		} else {
+			c = (u8) ('A' + i - 1 - 6);
+		}
+		current	  = ( current + 0x07) & -0x08;
+		printk(BIOS_DEBUG, "ACPI:    * SSDT for PCI%c at %lx\n", c, current); //pci0 and pci1 are in dsdt
+		ssdtx = (acpi_header_t *)current;
+		switch (sysconf.hcid[i]) {
+		case 1:
+			p = &AmlCode_ssdt2;
+			break;
+		case 2:
+			p = &AmlCode_ssdt3;
+			break;
+		case 3:	/* 8131 */
+			p = &AmlCode_ssdt4;
+			break;
+		default:
+			/* HTX no io apic */
+			p = &AmlCode_ssdt5;
+			break;
+		}
+		memcpy(ssdtx, p, sizeof(acpi_header_t));
+		current += ssdtx->length;
+		memcpy(ssdtx, p, ssdtx->length);
+		update_ssdtx((void *)ssdtx, i);
+		ssdtx->checksum = 0;
+		ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length);
+		acpi_add_table(rsdp, ssdtx);
+	}
+#endif
+
+	/* DSDT */
+	current	  = ( current + 0x07) & -0x08;
+	printk(BIOS_DEBUG, "ACPI:    * DSDT at %lx\n", current);
+	dsdt = (acpi_header_t *)current; // it will used by fadt
+	memcpy(dsdt, &AmlCode, sizeof(acpi_header_t));
+	current += dsdt->length;
+	memcpy(dsdt, &AmlCode, dsdt->length);
+	printk(BIOS_DEBUG, "ACPI:    * DSDT @ %p Length %x\n",dsdt,dsdt->length);
+
+	/* FACS */ // it needs 64 bit alignment
+	current	  = ( current + 0x07) & -0x08;
+	printk(BIOS_DEBUG, "ACPI:	* FACS at %lx\n", current);
+	facs = (acpi_facs_t *) current; // it will be used by fadt
+	current += sizeof(acpi_facs_t);
+	acpi_create_facs(facs);
+
+	/* FDAT */
+#if CONFIG_BOARD_HAS_FADT == 1
+	current	  = ( current + 0x07) & -0x08;
+	printk(BIOS_DEBUG, "ACPI:    * FADT at %lx\n", current);
+	fadt = (acpi_fadt_t *) current;
+	current += sizeof(acpi_fadt_t);
+
+	acpi_create_fadt(fadt, facs, dsdt);
+	acpi_add_table(rsdp, fadt);
+#endif
+
+#if DUMP_ACPI_TABLES == 1
+	printk(BIOS_DEBUG, "rsdp\n");
+	dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t));
+
+	printk(BIOS_DEBUG, "rsdt\n");
+	dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t));
+
+	printk(BIOS_DEBUG, "madt\n");
+	dump_mem(madt, ((void *)madt) + madt->header.length);
+
+	printk(BIOS_DEBUG, "srat\n");
+	dump_mem(srat, ((void *)srat) + srat->header.length);
+
+	printk(BIOS_DEBUG, "slit\n");
+	dump_mem(slit, ((void *)slit) + slit->header.length);
+
+	printk(BIOS_DEBUG, "ssdt\n");
+	dump_mem(ssdt, ((void *)ssdt) + ssdt->length);
+
+	printk(BIOS_DEBUG, "fadt\n");
+	dump_mem(fadt, ((void *)fadt) + fadt->header.length);
+#endif
+
+	printk(BIOS_INFO, "ACPI: done.\n");
+	return current;
+}
diff --git a/src/mainboard/avalue/eax-785e/chip.h b/src/mainboard/avalue/eax-785e/chip.h
new file mode 100644
index 0000000..5957589
--- /dev/null
+++ b/src/mainboard/avalue/eax-785e/chip.h
@@ -0,0 +1,22 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+extern struct chip_operations mainboard_ops;
+
+struct mainboard_config {};
diff --git a/src/mainboard/avalue/eax-785e/cmos.layout b/src/mainboard/avalue/eax-785e/cmos.layout
new file mode 100644
index 0000000..53fdef5
--- /dev/null
+++ b/src/mainboard/avalue/eax-785e/cmos.layout
@@ -0,0 +1,98 @@
+entries
+
+#start-bit length  config config-ID    name
+#0            8       r       0        seconds
+#8            8       r       0        alarm_seconds
+#16           8       r       0        minutes
+#24           8       r       0        alarm_minutes
+#32           8       r       0        hours
+#40           8       r       0        alarm_hours
+#48           8       r       0        day_of_week
+#56           8       r       0        day_of_month
+#64           8       r       0        month
+#72           8       r       0        year
+#80           4       r       0        rate_select
+#84           3       r       0        REF_Clock
+#87           1       r       0        UIP
+#88           1       r       0        auto_switch_DST
+#89           1       r       0        24_hour_mode
+#90           1       r       0        binary_values_enable
+#91           1       r       0        square-wave_out_enable
+#92           1       r       0        update_finished_enable
+#93           1       r       0        alarm_interrupt_enable
+#94           1       r       0        periodic_interrupt_enable
+#95           1       r       0        disable_clock_updates
+#96         288       r       0        temporary_filler
+0          384       r       0        reserved_memory
+384          1       e       4        boot_option
+385          1       e       4        last_boot
+386          1       e       1        ECC_memory
+388          4       r       0        reboot_bits
+392          3       e       5        baud_rate
+395          1       e       1        hw_scrubber
+396          1       e       1        interleave_chip_selects
+397          2       e       8        max_mem_clock
+399          1       e       2        multi_core
+400          1       e       1        power_on_after_fail
+412          4       e       6        debug_level
+416          4       e       7        boot_first
+420          4       e       7        boot_second
+424          4       e       7        boot_third
+428          4       h       0        boot_index
+432          8       h       0        boot_countdown
+440          4       e       9        slow_cpu
+444          1       e       1        nmi
+445          1       e       1        iommu
+728        256       h       0        user_data
+984         16       h       0        check_sum
+# Reserve the extended AMD configuration registers
+1000        24       r       0        amd_reserved
+
+
+
+enumerations
+
+#ID value   text
+1     0     Disable
+1     1     Enable
+2     0     Enable
+2     1     Disable
+4     0     Fallback
+4     1     Normal
+5     0     115200
+5     1     57600
+5     2     38400
+5     3     19200
+5     4     9600
+5     5     4800
+5     6     2400
+5     7     1200
+6     6     Notice
+6     7     Info
+6     8     Debug
+6     9     Spew
+7     0     Network
+7     1     HDD
+7     2     Floppy
+7     8     Fallback_Network
+7     9     Fallback_HDD
+7     10    Fallback_Floppy
+#7     3     ROM
+8     0     400Mhz
+8     1     333Mhz
+8     2     266Mhz
+8     3     200Mhz
+9     0     off
+9     1     87.5%
+9     2     75.0%
+9     3     62.5%
+9     4     50.0%
+9     5     37.5%
+9     6     25.0%
+9     7     12.5%
+
+checksums
+
+checksum 392 983 984
+
+
diff --git a/src/mainboard/avalue/eax-785e/devicetree.cb b/src/mainboard/avalue/eax-785e/devicetree.cb
new file mode 100644
index 0000000..bf58f90
--- /dev/null
+++ b/src/mainboard/avalue/eax-785e/devicetree.cb
@@ -0,0 +1,111 @@
+# sample config for avalue/EAX-785E
+chip northbridge/amd/amdfam10/root_complex
+	device lapic_cluster 0 on
+		chip cpu/amd/socket_AM3  #L1 and DDR3
+			 device lapic 0 on end
+		end
+	end
+	device pci_domain 0 on
+		subsystemid 0x1612 0x3060 inherit #TODO: Set the correctly subsystem id.
+		chip northbridge/amd/amdfam10
+			device pci 18.0 on #  northbridge
+				chip southbridge/amd/rs780
+					device pci 0.0 on end # HT 0x9600
+					device pci 1.0 on end # Internal Graphics P2P bridge 0x9712
+					device pci 2.0 on end # GFX_RX0-7/TX0-7   PCIEx16_1 slot
+					device pci 3.0 on end # GFX_RX8-15/TX8-15 PCIEx16_2 slot
+					device pci 4.0 on end # PortB GPP_RX/TX0 PCIEx1_1 slot
+					device pci 5.0 on end # PortC GPP_RX/TX1 PCIEx1_2 slot
+					device pci 6.0 on end # PortD GPP_RX/TX2 PCIEx1_3 slot
+					device pci 7.0 on end # PortE GPP_RX/TX3 PCIEx1_4 slot
+					device pci 8.0 off end # NB/SB Link P2P bridge
+					device pci 9.0 on end # Ethernet
+					device pci a.0 on end # Ethernet
+					register "gppsb_configuration" = "4"	# Configuration E
+					register "gpp_configuration" = "3"	# Configuration D
+					register "port_enable" = "0x6FE"
+					register "gfx_dev2_dev3" = "0" #no use
+					register "gfx_dual_slot" = "1" # 0 single slot, 1 dual slot
+					register "gfx_lane_reversal" = "0"
+					register "gfx_compliance" = "0"
+					register "gfx_reconfiguration" = "1"
+					register "gfx_link_width" = "0"
+					register "gfx_tmds" = "1"
+					register "gfx_pcie_config" = "4" # 2x8 GFX, one on Lanes 0-7, one on Lanes 8-15
+					register "gfx_ddi_config" = "0"  # no DDI_SL
+				end
+				chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pci bus
+					device pci 11.0 on end # SATA
+					device pci 12.0 on end # USB
+					device pci 12.2 on end # USB
+					device pci 13.0 on end # USB
+					device pci 13.2 on end # USB
+					device pci 14.0 on end # SM
+					device pci 14.1 on end # IDE    0x439c
+					device pci 14.2 on end # HDA    0x4383
+					device pci 14.3 on
+                                                chip superio/winbond/w83627hf
+                                                        device pnp 2e.0 off #  Floppy
+                                                                io 0x60 = 0x3f0
+                                                                irq 0x70 = 6
+                                                                drq 0x74 = 2
+                                                        end
+                                                        device pnp 2e.1 off #  Parallel Port
+                                                                io 0x60 = 0x378
+                                                                irq 0x70 = 7
+                                                        end
+                                                        device pnp 2e.2 on #  Com1
+                                                                io 0x60 = 0x3f8
+                                                                irq 0x70 = 4
+                                                        end
+                                                        device pnp 2e.3 on #  Com2
+                                                                io 0x60 = 0x2f8
+                                                                irq 0x70 = 3
+                                                        end
+                                                        device pnp 2e.5 on #  PS/2 Keyboard & mouse
+                                                                io 0x60 = 0x60
+                                                                io 0x62 = 0x64
+                                                                irq 0x70 = 1
+                                                                irq 0x72 = 12
+                                                        end
+                                                        device pnp 2e.6 off  # SFI
+                                                                io 0x62 = 0x100
+                                                        end
+                                                        device pnp 2e.7 off #  GPIO_GAME_MIDI
+                                                                io 0x60 = 0x220
+                                                                io 0x62 = 0x300
+                                                                irq 0x70 = 9
+                                                        end
+                                                        device pnp 2e.8 off end #  WDTO_PLED
+                                                        device pnp 2e.9 off end #  GPIO_SUSLED
+                                                        device pnp 2e.a off end #  ACPI
+                                                        device pnp 2e.b on #  HW Monitor
+                                                                io 0x60 = 0x290
+                                                                irq 0x70 = 5
+                                                        end
+                                                end     #superio/winbond/w83627hf
+					end # LPC	0x439d
+					device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0}
+					device pci 14.5 on end # USB 2
+					device pci 14.6 off end # Gec
+					device pci 15.0 off end # PCIe 0
+					device pci 15.1 off end # PCIe 1
+					device pci 15.2 off end # PCIe 2
+					device pci 15.3 on end # PCIe 3
+					device pci 16.0 on end # USB
+					device pci 16.2 on end # USB
+					#register "gpp_configuration" = "0" #4:0:0:0
+					#register "gpp_configuration" = "2" #2:2:0:0
+					#register "gpp_configuration" = "3" #2:1:1:0
+					register "gpp_configuration" = "4" #1:1:1:1
+					register "boot_switch_sata_ide" = "0"	# 0: boot from SATA. 1: IDE
+				end	#southbridge/amd/cimx/sb800
+			end #  device pci 18.0
+
+			device pci 18.1 on end
+			device pci 18.2 on end
+			device pci 18.3 on end
+			device pci 18.4 on end
+		end
+	end #pci_domain
+end
diff --git a/src/mainboard/avalue/eax-785e/dsdt.asl b/src/mainboard/avalue/eax-785e/dsdt.asl
new file mode 100644
index 0000000..1287f95
--- /dev/null
+++ b/src/mainboard/avalue/eax-785e/dsdt.asl
@@ -0,0 +1,1824 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* DefinitionBlock Statement */
+DefinitionBlock (
+	"DSDT.AML",           /* Output filename */
+	"DSDT",                 /* Signature */
+	0x02,		/* DSDT Revision, needs to be 2 for 64bit */
+	"AVALUE  ",               /* OEMID */
+	"EAX-785E",	     /* TABLE ID */
+	0x00010001	/* OEM Revision */
+	)
+{	/* Start of ASL file */
+	/* #include "../../../arch/x86/acpi/debug.asl" */		/* Include global debug methods if needed */
+
+	/* Data to be patched by the BIOS during POST */
+	/* FIXME the patching is not done yet! */
+	/* Memory related values */
+	Name(LOMH, 0x0)	/* Start of unused memory in C0000-E0000 range */
+	Name(PBAD, 0x0)	/* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
+	Name(PBLN, 0x0)	/* Length of BIOS area */
+
+	Name(PCBA, 0xE0000000)	/* Base address of PCIe config space */
+	Name(HPBA, 0xFED00000)	/* Base address of HPET table */
+
+	Name(SSFG, 0x0D)		/* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
+
+	/* USB overcurrent mapping pins.   */
+	Name(UOM0, 0)
+	Name(UOM1, 2)
+	Name(UOM2, 0)
+	Name(UOM3, 7)
+	Name(UOM4, 2)
+	Name(UOM5, 2)
+	Name(UOM6, 6)
+	Name(UOM7, 2)
+	Name(UOM8, 6)
+	Name(UOM9, 6)
+
+	/* Some global data */
+	Name(OSTP, 3)		/* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
+	Name(OSV, Ones)	/* Assume nothing */
+	Name(PMOD, One)	/* Assume APIC */
+
+	/*
+	 * Processor Object
+	 *
+	 */
+	Scope (\_PR) {		/* define processor scope */
+		Processor(
+			CPU0,		/* name space name */
+			0,		/* Unique number for this processor */
+			0x808,		/* PBLK system I/O address !hardcoded! */
+			0x06		/* PBLKLEN for boot processor */
+			) {
+			#include "acpi/cpstate.asl"
+		}
+
+		Processor(
+			CPU1,		/* name space name */
+			1,		/* Unique number for this processor */
+			0x0000,		/* PBLK system I/O address !hardcoded! */
+			0x00		/* PBLKLEN for boot processor */
+			) {
+			#include "acpi/cpstate.asl"
+		}
+
+		Processor(
+			CPU2,		/* name space name */
+			2,		/* Unique number for this processor */
+			0x0000,		/* PBLK system I/O address !hardcoded! */
+			0x00		/* PBLKLEN for boot processor */
+			) {
+			#include "acpi/cpstate.asl"
+		}
+
+		Processor(
+			CPU3,		/* name space name */
+			3,		/* Unique number for this processor */
+			0x0000,		/* PBLK system I/O address !hardcoded! */
+			0x00		/* PBLKLEN for boot processor */
+			) {
+			#include "acpi/cpstate.asl"
+		}
+	} /* End _PR scope */
+
+	/* PIC IRQ mapping registers, C00h-C01h. */
+	OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002)
+		Field(PRQM, ByteAcc, NoLock, Preserve) {
+		PRQI, 0x00000008,
+		PRQD, 0x00000008,  /* Offset: 1h */
+	}
+	IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) {
+		PIRA, 0x00000008,	/* Index 0 */
+		PIRB, 0x00000008,	/* Index 1 */
+		PIRC, 0x00000008,	/* Index 2 */
+		PIRD, 0x00000008,	/* Index 3 */
+		PIRE, 0x00000008,	/* Index 4 */
+		PIRF, 0x00000008,	/* Index 5 */
+		PIRG, 0x00000008,	/* Index 6 */
+		PIRH, 0x00000008,	/* Index 7 */
+	}
+
+	/* PCI Error control register */
+	OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001)
+		Field(PERC, ByteAcc, NoLock, Preserve) {
+		SENS, 0x00000001,
+		PENS, 0x00000001,
+		SENE, 0x00000001,
+		PENE, 0x00000001,
+	}
+
+	/* Client Management index/data registers */
+	OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002)
+		Field(CMT, ByteAcc, NoLock, Preserve) {
+		CMTI,      8,
+		/* Client Management Data register */
+		G64E,   1,
+		G64O,      1,
+		G32O,      2,
+		,       2,
+		GPSL,     2,
+	}
+
+	/* GPM Port register */
+	OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001)
+		Field(GPT, ByteAcc, NoLock, Preserve) {
+		GPB0,1,
+		GPB1,1,
+		GPB2,1,
+		GPB3,1,
+		GPB4,1,
+		GPB5,1,
+		GPB6,1,
+		GPB7,1,
+	}
+
+	/* Flash ROM program enable register */
+	OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001)
+		Field(FRE, ByteAcc, NoLock, Preserve) {
+		,     0x00000006,
+		FLRE, 0x00000001,
+	}
+
+	/* PM2 index/data registers */
+	OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002)
+		Field(PM2R, ByteAcc, NoLock, Preserve) {
+		PM2I, 0x00000008,
+		PM2D, 0x00000008,
+	}
+
+	/* Power Management I/O registers, TODO:PMIO is quite different in SB800. */
+	OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002)
+		Field(PIOR, ByteAcc, NoLock, Preserve) {
+		PIOI, 0x00000008,
+		PIOD, 0x00000008,
+	}
+	IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) {
+		Offset(0x00),	/* MiscControl */
+		, 1,
+		T1EE, 1,
+		T2EE, 1,
+		Offset(0x01),	/* MiscStatus */
+		, 1,
+		T1E, 1,
+		T2E, 1,
+		Offset(0x04),	/* SmiWakeUpEventEnable3 */
+		, 7,
+		SSEN, 1,
+		Offset(0x07),	/* SmiWakeUpEventStatus3 */
+		, 7,
+		CSSM, 1,
+		Offset(0x10),	/* AcpiEnable */
+		, 6,
+		PWDE, 1,
+		Offset(0x1C),	/* ProgramIoEnable */
+		, 3,
+		MKME, 1,
+		IO3E, 1,
+		IO2E, 1,
+		IO1E, 1,
+		IO0E, 1,
+		Offset(0x1D),	/* IOMonitorStatus */
+		, 3,
+		MKMS, 1,
+		IO3S, 1,
+		IO2S, 1,
+		IO1S, 1,
+		IO0S,1,
+		Offset(0x20),	/* AcpiPmEvtBlk. TODO: should be 0x60 */
+		APEB, 16,
+		Offset(0x36),	/* GEvtLevelConfig */
+		, 6,
+		ELC6, 1,
+		ELC7, 1,
+		Offset(0x37),	/* GPMLevelConfig0 */
+		, 3,
+		PLC0, 1,
+		PLC1, 1,
+		PLC2, 1,
+		PLC3, 1,
+		PLC8, 1,
+		Offset(0x38),	/* GPMLevelConfig1 */
+		, 1,
+		 PLC4, 1,
+		 PLC5, 1,
+		, 1,
+		 PLC6, 1,
+		 PLC7, 1,
+		Offset(0x3B),	/* PMEStatus1 */
+		GP0S, 1,
+		GM4S, 1,
+		GM5S, 1,
+		APS, 1,
+		GM6S, 1,
+		GM7S, 1,
+		GP2S, 1,
+		STSS, 1,
+		Offset(0x55),	/* SoftPciRst */
+		SPRE, 1,
+		, 1,
+		, 1,
+		PNAT, 1,
+		PWMK, 1,
+		PWNS, 1,
+
+		/* 	Offset(0x61), */	/*  Options_1 */
+		/* 		,7,  */
+		/* 		R617,1, */
+
+		Offset(0x65),	/* UsbPMControl */
+		, 4,
+		URRE, 1,
+		Offset(0x68),	/* MiscEnable68 */
+		, 3,
+		TMTE, 1,
+		, 1,
+		Offset(0x92),	/* GEVENTIN */
+		, 7,
+		E7IS, 1,
+		Offset(0x96),	/* GPM98IN */
+		G8IS, 1,
+		G9IS, 1,
+		Offset(0x9A),	/* EnhanceControl */
+		,7,
+		HPDE, 1,
+		Offset(0xA8),	/* PIO7654Enable */
+		IO4E, 1,
+		IO5E, 1,
+		IO6E, 1,
+		IO7E, 1,
+		Offset(0xA9),	/* PIO7654Status */
+		IO4S, 1,
+		IO5S, 1,
+		IO6S, 1,
+		IO7S, 1,
+	}
+
+	/* PM1 Event Block
+	* First word is PM1_Status, Second word is PM1_Enable
+	*/
+	OperationRegion(P1EB, SystemIO, APEB, 0x04)
+		Field(P1EB, ByteAcc, NoLock, Preserve) {
+		TMST, 1,
+		,    3,
+		BMST,    1,
+		GBST,   1,
+		Offset(0x01),
+		PBST, 1,
+		, 1,
+		RTST, 1,
+		, 3,
+		PWST, 1,
+		SPWS, 1,
+		Offset(0x02),
+		TMEN, 1,
+		, 4,
+		GBEN, 1,
+		Offset(0x03),
+		PBEN, 1,
+		, 1,
+		RTEN, 1,
+		, 3,
+		PWDA, 1,
+	}
+
+	Scope(\_SB) {
+		/* PCIe Configuration Space for 16 busses */
+		OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */
+			Field(PCFG, ByteAcc, NoLock, Preserve) {
+			/* Byte offsets are computed using the following technique:
+			 * ((bus number + 1) * ((device number * 8) * 4096)) + register offset
+			 * The 8 comes from 8 functions per device, and 4096 bytes per function config space
+			*/
+			Offset(0x00088024),	/* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */
+			STB5, 32,
+			Offset(0x00098042),	/* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */
+			PT0D, 1,
+			PT1D, 1,
+			PT2D, 1,
+			PT3D, 1,
+			PT4D, 1,
+			PT5D, 1,
+			PT6D, 1,
+			PT7D, 1,
+			PT8D, 1,
+			PT9D, 1,
+			Offset(0x000A0004),	/* Byte offset to SMBUS	register 4h - Bus 0, Device 20, Function 0 */
+			SBIE, 1,
+			SBME, 1,
+			Offset(0x000A0008),	/* Byte offset to SMBUS	register 8h - Bus 0, Device 20, Function 0 */
+			SBRI, 8,
+			Offset(0x000A0014),	/* Byte offset to SMBUS	register 14h - Bus 0, Device 20, Function 0 */
+			SBB1, 32,
+			Offset(0x000A0078),	/* Byte offset to SMBUS	register 78h - Bus 0, Device 20, Function 0 */
+			,14,
+			P92E, 1,		/* Port92 decode enable */
+		}
+
+		OperationRegion(SB5, SystemMemory, STB5, 0x1000)
+			Field(SB5, AnyAcc, NoLock, Preserve){
+			/* Port 0 */
+			Offset(0x120),		/* Port 0 Task file status */
+			P0ER, 1,
+			, 2,
+			P0DQ, 1,
+			, 3,
+			P0BY, 1,
+			Offset(0x128),		/* Port 0 Serial ATA status */
+			P0DD, 4,
+			, 4,
+			P0IS, 4,
+			Offset(0x12C),		/* Port 0 Serial ATA control */
+			P0DI, 4,
+			Offset(0x130),		/* Port 0 Serial ATA error */
+			, 16,
+			P0PR, 1,
+
+			/* Port 1 */
+			offset(0x1A0),		/* Port 1 Task file status */
+			P1ER, 1,
+			, 2,
+			P1DQ, 1,
+			, 3,
+			P1BY, 1,
+			Offset(0x1A8),		/* Port 1 Serial ATA status */
+			P1DD, 4,
+			, 4,
+			P1IS, 4,
+			Offset(0x1AC),		/* Port 1 Serial ATA control */
+			P1DI, 4,
+			Offset(0x1B0),		/* Port 1 Serial ATA error */
+			, 16,
+			P1PR, 1,
+
+			/* Port 2 */
+			Offset(0x220),		/* Port 2 Task file status */
+			P2ER, 1,
+			, 2,
+			P2DQ, 1,
+			, 3,
+			P2BY, 1,
+			Offset(0x228),		/* Port 2 Serial ATA status */
+			P2DD, 4,
+			, 4,
+			P2IS, 4,
+			Offset(0x22C),		/* Port 2 Serial ATA control */
+			P2DI, 4,
+			Offset(0x230),		/* Port 2 Serial ATA error */
+			, 16,
+			P2PR, 1,
+
+			/* Port 3 */
+			Offset(0x2A0),		/* Port 3 Task file status */
+			P3ER, 1,
+			, 2,
+			P3DQ, 1,
+			, 3,
+			P3BY, 1,
+			Offset(0x2A8),		/* Port 3 Serial ATA status */
+			P3DD, 4,
+			, 4,
+			P3IS, 4,
+			Offset(0x2AC),		/* Port 3 Serial ATA control */
+			P3DI, 4,
+			Offset(0x2B0),		/* Port 3 Serial ATA error */
+			, 16,
+			P3PR, 1,
+		}
+	}
+
+
+	#include "acpi/routing.asl"
+
+	Scope(\_SB) {
+
+		Method(CkOT, 0){
+
+			if(LNotEqual(OSTP, Ones)) {Return(OSTP)}	/* OS version was already detected */
+
+			if(CondRefOf(\_OSI,Local1))
+			{
+				Store(1, OSTP)                /* Assume some form of XP */
+				if (\_OSI("Windows 2006"))      /* Vista */
+				{
+					Store(2, OSTP)
+				}
+			} else {
+				If(WCMP(\_OS,"Linux")) {
+					Store(3, OSTP)            /* Linux */
+				} Else {
+					Store(4, OSTP)            /* Gotta be WinCE */
+				}
+			}
+			Return(OSTP)
+		}
+
+		Method(_PIC, 0x01, NotSerialized)
+		{
+			If (Arg0)
+			{
+				\_SB.CIRQ()
+			}
+			Store(Arg0, PMOD)
+		}
+		Method(CIRQ, 0x00, NotSerialized){
+			Store(0, PIRA)
+			Store(0, PIRB)
+			Store(0, PIRC)
+			Store(0, PIRD)
+			Store(0, PIRE)
+			Store(0, PIRF)
+			Store(0, PIRG)
+			Store(0, PIRH)
+		}
+
+		Name(IRQB, ResourceTemplate(){
+			IRQ(Level,ActiveLow,Shared){15}
+		})
+
+		Name(IRQP, ResourceTemplate(){
+			IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15}
+		})
+
+		Name(PITF, ResourceTemplate(){
+			IRQ(Level,ActiveLow,Exclusive){9}
+		})
+
+		Device(INTA) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 1)
+
+			Method(_STA, 0) {
+				if (PIRA) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTA._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKA\\_DIS\n") */
+				Store(0, PIRA)
+			} /* End Method(_SB.INTA._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKA\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTA._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKA\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PIRA, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTA._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKA\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PIRA)
+			} /* End Method(_SB.INTA._SRS) */
+		} /* End Device(INTA) */
+
+		Device(INTB) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 2)
+
+			Method(_STA, 0) {
+				if (PIRB) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTB._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKB\\_DIS\n") */
+				Store(0, PIRB)
+			} /* End Method(_SB.INTB._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKB\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTB._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKB\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PIRB, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTB._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKB\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PIRB)
+			} /* End Method(_SB.INTB._SRS) */
+		} /* End Device(INTB)  */
+
+		Device(INTC) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 3)
+
+			Method(_STA, 0) {
+				if (PIRC) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTC._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKC\\_DIS\n") */
+				Store(0, PIRC)
+			} /* End Method(_SB.INTC._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKC\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTC._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKC\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PIRC, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTC._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKC\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PIRC)
+			} /* End Method(_SB.INTC._SRS) */
+		} /* End Device(INTC)  */
+
+		Device(INTD) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 4)
+
+			Method(_STA, 0) {
+				if (PIRD) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTD._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKD\\_DIS\n") */
+				Store(0, PIRD)
+			} /* End Method(_SB.INTD._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKD\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTD._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKD\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PIRD, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTD._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKD\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PIRD)
+			} /* End Method(_SB.INTD._SRS) */
+		} /* End Device(INTD)  */
+
+		Device(INTE) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 5)
+
+			Method(_STA, 0) {
+				if (PIRE) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTE._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKE\\_DIS\n") */
+				Store(0, PIRE)
+			} /* End Method(_SB.INTE._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKE\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTE._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKE\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PIRE, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTE._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKE\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PIRE)
+			} /* End Method(_SB.INTE._SRS) */
+		} /* End Device(INTE)  */
+
+		Device(INTF) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 6)
+
+			Method(_STA, 0) {
+				if (PIRF) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTF._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKF\\_DIS\n") */
+				Store(0, PIRF)
+			} /* End Method(_SB.INTF._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKF\\_PRS\n") */
+				Return(PITF)
+			} /* Method(_SB.INTF._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKF\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PIRF, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTF._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKF\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PIRF)
+			} /*  End Method(_SB.INTF._SRS) */
+		} /* End Device(INTF)  */
+
+		Device(INTG) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 7)
+
+			Method(_STA, 0) {
+				if (PIRG) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTG._STA)  */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKG\\_DIS\n") */
+				Store(0, PIRG)
+			} /* End Method(_SB.INTG._DIS)  */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKG\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTG._CRS)  */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKG\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PIRG, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTG._CRS)  */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKG\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PIRG)
+			} /* End Method(_SB.INTG._SRS)  */
+		} /* End Device(INTG)  */
+
+		Device(INTH) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 8)
+
+			Method(_STA, 0) {
+				if (PIRH) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTH._STA)  */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKH\\_DIS\n") */
+				Store(0, PIRH)
+			} /* End Method(_SB.INTH._DIS)  */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKH\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTH._CRS)  */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKH\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PIRH, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTH._CRS)  */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKH\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PIRH)
+			} /* End Method(_SB.INTH._SRS)  */
+		} /* End Device(INTH)   */
+
+	}   /* End Scope(_SB)  */
+
+
+	/* Supported sleep states: */
+	Name(\_S0, Package () {0x00, 0x00, 0x00, 0x00} )	/* (S0) - working state */
+
+	If (LAnd(SSFG, 0x01)) {
+		Name(\_S1, Package () {0x01, 0x01, 0x00, 0x00} )	/* (S1) - sleeping w/CPU context */
+	}
+	If (LAnd(SSFG, 0x02)) {
+		Name(\_S2, Package () {0x02, 0x02, 0x00, 0x00} )	/* (S2) - "light" Suspend to RAM */
+	}
+	If (LAnd(SSFG, 0x04)) {
+		Name(\_S3, Package () {0x03, 0x03, 0x00, 0x00} )	/* (S3) - Suspend to RAM */
+	}
+	If (LAnd(SSFG, 0x08)) {
+		Name(\_S4, Package () {0x04, 0x04, 0x00, 0x00} )	/* (S4) - Suspend to Disk */
+	}
+
+	Name(\_S5, Package () {0x05, 0x05, 0x00, 0x00} )	/* (S5) - Soft Off */
+
+	Name(\_SB.CSPS ,0)				/* Current Sleep State (S0, S1, S2, S3, S4, S5) */
+	Name(CSMS, 0)			/* Current System State */
+
+	/* Wake status package */
+	Name(WKST,Package(){Zero, Zero})
+
+	/*
+	* \_PTS - Prepare to Sleep method
+	*
+	*	Entry:
+	*		Arg0=The value of the sleeping state S1=1, S2=2, etc
+	*
+	* Exit:
+	*		-none-
+	*
+	* The _PTS control method is executed at the beginning of the sleep process
+	* for S1-S5. The sleeping value is passed to the _PTS control method.	This
+	* control method may be executed a relatively long time before entering the
+	* sleep state and the OS may abort	the operation without notification to
+	* the ACPI driver.  This method cannot modify the configuration or power
+	* state of any device in the system.
+	*/
+	Method(\_PTS, 1) {
+		/* DBGO("\\_PTS\n") */
+		/* DBGO("From S0 to S") */
+		/* DBGO(Arg0) */
+		/* DBGO("\n") */
+
+		/* Don't allow PCIRST# to reset USB */
+		if (LEqual(Arg0,3)){
+			Store(0,URRE)
+		}
+
+		/* Clear sleep SMI status flag and enable sleep SMI trap. */
+		/*Store(One, CSSM)
+		Store(One, SSEN)*/
+
+		/* On older chips, clear PciExpWakeDisEn */
+		/*if (LLessEqual(\_SB.SBRI, 0x13)) {
+		*    	Store(0,\_SB.PWDE)
+		*}
+		*/
+
+		/* Clear wake status structure. */
+		Store(0, Index(WKST,0))
+		Store(0, Index(WKST,1))
+	} /* End Method(\_PTS) */
+
+	/*
+	*  The following method results in a "not a valid reserved NameSeg"
+	*  warning so I have commented it out for the duration.  It isn't
+	*  used, so it could be removed.
+	*
+	*
+	*  	\_GTS OEM Going To Sleep method
+	*
+	*  	Entry:
+	*  		Arg0=The value of the sleeping state S1=1, S2=2
+	*
+	*  	Exit:
+	*  		-none-
+	*
+	*  Method(\_GTS, 1) {
+	*  DBGO("\\_GTS\n")
+	*  DBGO("From S0 to S")
+	*  DBGO(Arg0)
+	*  DBGO("\n")
+	*  }
+	*/
+
+	/*
+	*	\_BFS OEM Back From Sleep method
+	*
+	*	Entry:
+	*		Arg0=The value of the sleeping state S1=1, S2=2
+	*
+	*	Exit:
+	*		-none-
+	*/
+	Method(\_BFS, 1) {
+		/* DBGO("\\_BFS\n") */
+		/* DBGO("From S") */
+		/* DBGO(Arg0) */
+		/* DBGO(" to S0\n") */
+	}
+
+	/*
+	*  \_WAK System Wake method
+	*
+	*	Entry:
+	*		Arg0=The value of the sleeping state S1=1, S2=2
+	*
+	*	Exit:
+	*		Return package of 2 DWords
+	*		Dword 1 - Status
+	*			0x00000000	wake succeeded
+	*			0x00000001	Wake was signaled but failed due to lack of power
+	*			0x00000002	Wake was signaled but failed due to thermal condition
+	*		Dword 2 - Power Supply state
+	*			if non-zero the effective S-state the power supply entered
+	*/
+	Method(\_WAK, 1) {
+		/* DBGO("\\_WAK\n") */
+		/* DBGO("From S") */
+		/* DBGO(Arg0) */
+		/* DBGO(" to S0\n") */
+
+		/* Re-enable HPET */
+		Store(1,HPDE)
+
+		/* Restore PCIRST# so it resets USB */
+		if (LEqual(Arg0,3)){
+			Store(1,URRE)
+		}
+
+		/* Arbitrarily clear PciExpWakeStatus */
+		Store(PWST, PWST)
+
+		/* if(DeRefOf(Index(WKST,0))) {
+		*	Store(0, Index(WKST,1))
+		* } else {
+		*	Store(Arg0, Index(WKST,1))
+		* }
+		*/
+		Return(WKST)
+	} /* End Method(\_WAK) */
+
+	Scope(\_GPE) {	/* Start Scope GPE */
+		/*  General event 0  */
+		/* Method(_L00) {
+		*	DBGO("\\_GPE\\_L00\n")
+		* }
+		*/
+
+		/*  General event 1  */
+		/* Method(_L01) {
+		*	DBGO("\\_GPE\\_L00\n")
+		* }
+		*/
+
+		/*  General event 2  */
+		/* Method(_L02) {
+		*	DBGO("\\_GPE\\_L00\n")
+		* }
+		*/
+
+		/*  General event 3  */
+		Method(_L03) {
+			/* DBGO("\\_GPE\\_L00\n") */
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/*  General event 4  */
+		/* Method(_L04) {
+		*	DBGO("\\_GPE\\_L00\n")
+		* }
+		*/
+
+		/*  General event 5  */
+		/* Method(_L05) {
+		*	DBGO("\\_GPE\\_L00\n")
+		* }
+		*/
+
+		/*  General event 6 - Used for GPM6, moved to USB.asl */
+		/* Method(_L06) {
+		*	DBGO("\\_GPE\\_L00\n")
+		* }
+		*/
+
+		/*  General event 7 - Used for GPM7, moved to USB.asl */
+		/* Method(_L07) {
+		*	DBGO("\\_GPE\\_L07\n")
+		* }
+		*/
+
+		/*  Legacy PM event  */
+		Method(_L08) {
+			/* DBGO("\\_GPE\\_L08\n") */
+		}
+
+		/*  Temp warning (TWarn) event  */
+		Method(_L09) {
+			/* DBGO("\\_GPE\\_L09\n") */
+			/* Notify (\_TZ.TZ00, 0x80) */
+		}
+
+		/*  Reserved  */
+		/* Method(_L0A) {
+		*	DBGO("\\_GPE\\_L0A\n")
+		* }
+		*/
+
+		/*  USB controller PME#  */
+		Method(_L0B) {
+			/* DBGO("\\_GPE\\_L0B\n") */
+			Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/*  AC97 controller PME#  */
+		/* Method(_L0C) {
+		*	DBGO("\\_GPE\\_L0C\n")
+		* }
+		*/
+
+		/*  OtherTherm PME#  */
+		/* Method(_L0D) {
+		*	DBGO("\\_GPE\\_L0D\n")
+		* }
+		*/
+
+		/*  GPM9 SCI event - Moved to USB.asl */
+		/* Method(_L0E) {
+		*	DBGO("\\_GPE\\_L0E\n")
+		* }
+		*/
+
+		/*  PCIe HotPlug event  */
+		/* Method(_L0F) {
+		* 	DBGO("\\_GPE\\_L0F\n")
+		* }
+		*/
+
+		/*  ExtEvent0 SCI event  */
+		Method(_L10) {
+			/* DBGO("\\_GPE\\_L10\n") */
+		}
+
+
+		/*  ExtEvent1 SCI event  */
+		Method(_L11) {
+			/* DBGO("\\_GPE\\_L11\n") */
+		}
+
+		/*  PCIe PME# event  */
+		/* Method(_L12) {
+		*	DBGO("\\_GPE\\_L12\n")
+		* }
+		*/
+
+		/*  GPM0 SCI event - Moved to USB.asl */
+		/* Method(_L13) {
+		* 	DBGO("\\_GPE\\_L13\n")
+		* }
+		*/
+
+		/*  GPM1 SCI event - Moved to USB.asl */
+		/* Method(_L14) {
+		* 	DBGO("\\_GPE\\_L14\n")
+		* }
+		*/
+
+		/*  GPM2 SCI event - Moved to USB.asl */
+		/* Method(_L15) {
+		* 	DBGO("\\_GPE\\_L15\n")
+		* }
+		*/
+
+		/*  GPM3 SCI event - Moved to USB.asl */
+		/* Method(_L16) {
+		*	DBGO("\\_GPE\\_L16\n")
+		* }
+		*/
+
+		/*  GPM8 SCI event - Moved to USB.asl */
+		/* Method(_L17) {
+		* 	DBGO("\\_GPE\\_L17\n")
+		* }
+		*/
+
+		/*  GPIO0 or GEvent8 event  */
+		Method(_L18) {
+			/* DBGO("\\_GPE\\_L18\n") */
+			Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/*  GPM4 SCI event - Moved to USB.asl */
+		/* Method(_L19) {
+		* 	DBGO("\\_GPE\\_L19\n")
+		* }
+		*/
+
+		/*  GPM5 SCI event - Moved to USB.asl */
+		/* Method(_L1A) {
+		*	DBGO("\\_GPE\\_L1A\n")
+		* }
+		*/
+
+		/*  Azalia SCI event  */
+		Method(_L1B) {
+			/* DBGO("\\_GPE\\_L1B\n") */
+			Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/*  GPM6 SCI event - Reassigned to _L06 */
+		/* Method(_L1C) {
+		*	DBGO("\\_GPE\\_L1C\n")
+		* }
+		*/
+
+		/*  GPM7 SCI event - Reassigned to _L07 */
+		/* Method(_L1D) {
+		*	DBGO("\\_GPE\\_L1D\n")
+		* }
+		*/
+
+		/*  GPIO2 or GPIO66 SCI event  */
+		/* Method(_L1E) {
+		* 	DBGO("\\_GPE\\_L1E\n")
+		* }
+		*/
+
+		/*  SATA SCI event - Moved to sata.asl */
+		/* Method(_L1F) {
+		*	 DBGO("\\_GPE\\_L1F\n")
+		* }
+		*/
+
+	} 	/* End Scope GPE */
+
+	#include "acpi/usb.asl"
+
+	/* South Bridge */
+	Scope(\_SB) { /* Start \_SB scope */
+		#include "../../../arch/x86/acpi/globutil.asl" /* global utility methods expected within the \_SB scope */
+
+		/*  _SB.PCI0 */
+		/* Note: Only need HID on Primary Bus */
+		Device(PCI0) {
+			External (TOM1)
+			External (TOM2)
+			Name(_HID, EISAID("PNP0A03"))
+			Name(_ADR, 0x00180000)	/* Dev# = BSP Dev#, Func# = 0 */
+			Method(_BBN, 0) { /* Bus number = 0 */
+				Return(0)
+			}
+			Method(_STA, 0) {
+				/* DBGO("\\_SB\\PCI0\\_STA\n") */
+				Return(0x0B)     /* Status is visible */
+			}
+
+			Method(_PRT,0) {
+				If(PMOD){ Return(APR0) }   /* APIC mode */
+				Return (PR0)                  /* PIC Mode */
+			} /* end _PRT */
+
+			/* Describe the Northbridge devices */
+			Device(AMRT) {
+				Name(_ADR, 0x00000000)
+			} /* end AMRT */
+
+			/* The internal GFX bridge */
+			Device(AGPB) {
+				Name(_ADR, 0x00010000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					Return (APR1)
+				}
+			}  /* end AGPB */
+
+			/* The external GFX bridge */
+			Device(PBR2) {
+				Name(_ADR, 0x00020000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS2) }   /* APIC mode */
+					Return (PS2)                  /* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR2 */
+
+			/* Dev3 is also an external GFX bridge, not used in Herring */
+
+			Device(PBR4) {
+				Name(_ADR, 0x00040000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS4) }   /* APIC mode */
+					Return (PS4)                  /* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR4 */
+
+			Device(PBR5) {
+				Name(_ADR, 0x00050000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS5) }   /* APIC mode */
+					Return (PS5)                  /* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR5 */
+
+			Device(PBR6) {
+				Name(_ADR, 0x00060000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS6) }   /* APIC mode */
+					Return (PS6)                  /* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR6 */
+
+			/* The onboard EtherNet chip */
+			Device(PBR7) {
+				Name(_ADR, 0x00070000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS7) }   /* APIC mode */
+					Return (PS7)                  /* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR7 */
+
+			/* GPP */
+			Device(PBR9) {
+				Name(_ADR, 0x00090000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS9) }   /* APIC mode */
+					Return (PS9)                  /* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR9 */
+
+			Device(PBRa) {
+				Name(_ADR, 0x000A0000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APSa) }   /* APIC mode */
+					Return (PSa)                  /* PIC Mode */
+				} /* end _PRT */
+			} /* end PBRa */
+
+			Device(PE20) {
+				Name(_ADR, 0x00150000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APE0) }   /* APIC mode */
+					Return (PE0)                  /* PIC Mode */
+				} /* end _PRT */
+			} /* end PE20 */
+			Device(PE21) {
+				Name(_ADR, 0x00150001)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APE1) }   /* APIC mode */
+					Return (PE1)                  /* PIC Mode */
+				} /* end _PRT */
+			} /* end PE21 */
+			Device(PE22) {
+				Name(_ADR, 0x00150002)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APE2) }   /* APIC mode */
+					Return (APE2)                  /* PIC Mode */
+				} /* end _PRT */
+			} /* end PE22 */
+			Device(PE23) {
+				Name(_ADR, 0x00150003)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APE3) }   /* APIC mode */
+					Return (PE3)                  /* PIC Mode */
+				} /* end _PRT */
+			} /* end PE23 */
+
+			/* PCI slot 1, 2, 3 */
+			Device(PIBR) {
+				Name(_ADR, 0x00140004)
+				Name(_PRW, Package() {0x18, 4})
+
+				Method(_PRT, 0) {
+					Return (PCIB)
+				}
+			}
+
+			/* Describe the Southbridge devices */
+			Device(STCR) {
+				Name(_ADR, 0x00110000)
+				#include "acpi/sata.asl"
+			} /* end STCR */
+
+			Device(UOH1) {
+				Name(_ADR, 0x00120000)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH1 */
+
+			Device(UOH2) {
+				Name(_ADR, 0x00120002)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH2 */
+
+			Device(UOH3) {
+				Name(_ADR, 0x00130000)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH3 */
+
+			Device(UOH4) {
+				Name(_ADR, 0x00130002)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH4 */
+
+			Device(UOH5) {
+				Name(_ADR, 0x00160000)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH5 */
+
+			Device(UOH6) {
+				Name(_ADR, 0x00160002)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH5 */
+
+			Device(UEH1) {
+				Name(_ADR, 0x00140005)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UEH1 */
+
+			Device(SBUS) {
+				Name(_ADR, 0x00140000)
+			} /* end SBUS */
+
+			/* Primary (and only) IDE channel */
+			Device(IDEC) {
+				Name(_ADR, 0x00140001)
+				#include "acpi/ide.asl"
+			} /* end IDEC */
+
+			Device(AZHD) {
+				Name(_ADR, 0x00140002)
+				OperationRegion(AZPD, PCI_Config, 0x00, 0x100)
+					Field(AZPD, AnyAcc, NoLock, Preserve) {
+					offset (0x42),
+					NSDI, 1,
+					NSDO, 1,
+					NSEN, 1,
+					offset (0x44),
+					IPCR, 4,
+					offset (0x54),
+					PWST, 2,
+					, 6,
+					PMEB, 1,
+					, 6,
+					PMST, 1,
+					offset (0x62),
+					MMCR, 1,
+					offset (0x64),
+					MMLA, 32,
+					offset (0x68),
+					MMHA, 32,
+					offset (0x6C),
+					MMDT, 16,
+				}
+
+				Method(_INI) {
+					If(LEqual(OSTP,3)){   /* If we are running Linux */
+						Store(zero, NSEN)
+						Store(one, NSDO)
+						Store(one, NSDI)
+					}
+				}
+			} /* end AZHD */
+
+			Device(LIBR) {
+				Name(_ADR, 0x00140003)
+				/* Method(_INI) {
+				*	DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n")
+				} */ /* End Method(_SB.SBRDG._INI) */
+
+				/* Real Time Clock Device */
+				Device(RTC0) {
+					Name(_HID, EISAID("PNP0B01"))	/* AT Real Time Clock */
+					Name(_CRS, ResourceTemplate() {
+						IRQNoFlags(){8}
+						IO(Decode16,0x0070, 0x0070, 0, 2)
+						/* IO(Decode16,0x0070, 0x0070, 0, 4) */
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */
+
+				Device(TMR) {	/* Timer */
+					Name(_HID,EISAID("PNP0100"))	/* System Timer */
+					Name(_CRS, ResourceTemplate() {
+						IRQNoFlags(){0}
+						IO(Decode16, 0x0040, 0x0040, 0, 4)
+						/* IO(Decode16, 0x0048, 0x0048, 0, 4) */
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.TMR) */
+
+				Device(SPKR) {	/* Speaker */
+					Name(_HID,EISAID("PNP0800"))	/* AT style speaker */
+					Name(_CRS, ResourceTemplate() {
+						IO(Decode16, 0x0061, 0x0061, 0, 1)
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */
+
+				Device(PIC) {
+					Name(_HID,EISAID("PNP0000"))	/* AT Interrupt Controller */
+					Name(_CRS, ResourceTemplate() {
+						IRQNoFlags(){2}
+						IO(Decode16,0x0020, 0x0020, 0, 2)
+						IO(Decode16,0x00A0, 0x00A0, 0, 2)
+						/* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */
+						/* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.PIC) */
+
+				Device(MAD) { /* 8257 DMA */
+					Name(_HID,EISAID("PNP0200"))	/* Hardware Device ID */
+					Name(_CRS, ResourceTemplate() {
+						DMA(Compatibility,BusMaster,Transfer8){4}
+						IO(Decode16, 0x0000, 0x0000, 0x10, 0x10)
+						IO(Decode16, 0x0081, 0x0081, 0x00, 0x03)
+						IO(Decode16, 0x0087, 0x0087, 0x00, 0x01)
+						IO(Decode16, 0x0089, 0x0089, 0x00, 0x03)
+						IO(Decode16, 0x008F, 0x008F, 0x00, 0x01)
+						IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20)
+					}) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */
+				} /* End Device(_SB.PCI0.LpcIsaBr.MAD) */
+
+				Device(COPR) {
+					Name(_HID,EISAID("PNP0C04"))	/* Math Coprocessor */
+					Name(_CRS, ResourceTemplate() {
+						IO(Decode16, 0x00F0, 0x00F0, 0, 0x10)
+						IRQNoFlags(){13}
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
+#if 0
+				Device(HPTM) {
+					Name(_HID,EISAID("PNP0103"))
+					Name(CRS,ResourceTemplate()	{
+						Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT)	/* 1kb reserved space */
+					})
+					Method(_STA, 0) {
+						Return(0x0F) /* sata is visible */
+					}
+					Method(_CRS, 0)	{
+						CreateDwordField(CRS, ^HPT._BAS, HPBA)
+						Store(HPBA, HPBA)
+						Return(CRS)
+					}
+				} /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
+#endif
+			} /* end LIBR */
+
+			Device(HPBR) {
+				Name(_ADR, 0x00140004)
+			} /* end HostPciBr */
+
+			Device(ACAD) {
+				Name(_ADR, 0x00140005)
+			} /* end Ac97audio */
+
+			Device(ACMD) {
+				Name(_ADR, 0x00140006)
+			} /* end Ac97modem */
+
+			Name(CRES, ResourceTemplate() {
+				IO(Decode16, 0x0CF8, 0x0CF8, 1,	8)
+
+				WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+					0x0000,			/* address granularity */
+					0x0000,			/* range minimum */
+					0x0CF7,			/* range maximum */
+					0x0000,			/* translation */
+					0x0CF8			/* length */
+				)
+
+				WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+					0x0000,			/* address granularity */
+					0x0D00,			/* range minimum */
+					0xFFFF,			/* range maximum */
+					0x0000,			/* translation */
+					0xF300			/* length */
+				)
+#if 0
+				Memory32Fixed(READWRITE, 0, 0xA0000, BSMM)
+				Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) 	/* VGA memory space */
+				Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1)	/* Assume C0000-E0000 empty */
+				Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS)   /* BIOS ROM area */
+
+				/* DRAM Memory from 1MB to TopMem */
+				Memory32Fixed(READWRITE, 0x00100000, 0, DMLO)	/* 1MB to TopMem */
+
+				/* BIOS space just below 4GB */
+				DWORDMemory(
+					ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+					0x00,			/* Granularity */
+					0x00000000,		/* Min */
+					0x00000000,		/* Max */
+					0x00000000,		/* Translation */
+					0x00000000,		/* Max-Min, RLEN */
+					,,
+					PCBM
+				)
+
+				/* DRAM memory from 4GB to TopMem2 */
+				QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+					0xFFFFFFFF,		/* Granularity */
+					0x00000000,		/*  Min */
+					0x00000000,		/* Max */
+					0x00000000,		/* Translation */
+					0x00000000,		/* Max-Min, RLEN */
+					,,
+					DMHI
+				)
+
+				/* BIOS space just below 16EB */
+				QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+					0xFFFFFFFF,		/* Granularity */
+					0x00000000,		/* Min */
+					0x00000000,		/*  Max */
+					0x00000000,		/* Translation */
+					0x00000000,		/* Max-Min, RLEN */
+					,,
+					PEBM
+				)
+#endif
+                                /* memory space for PCI BARs below 4GB */
+                                Memory32Fixed(ReadOnly, 0x00000000, 0x00000000, MMIO)
+			}) /* End Name(_SB.PCI0.CRES) */
+
+			Method(_CRS, 0) {
+				/* DBGO("\\_SB\\PCI0\\_CRS\n") */
+#if 0
+				CreateDWordField(CRES, ^EMM1._BAS, EM1B)
+				CreateDWordField(CRES, ^EMM1._LEN, EM1L)
+				CreateDWordField(CRES, ^DMLO._BAS, DMLB)
+				CreateDWordField(CRES, ^DMLO._LEN, DMLL)
+				CreateDWordField(CRES, ^PCBM._MIN, PBMB)
+				CreateDWordField(CRES, ^PCBM._LEN, PBML)
+
+				CreateQWordField(CRES, ^DMHI._MIN, DMHB)
+				CreateQWordField(CRES, ^DMHI._LEN, DMHL)
+				CreateQWordField(CRES, ^PEBM._MIN, EBMB)
+				CreateQWordField(CRES, ^PEBM._LEN, EBML)
+
+				If(LGreater(LOMH, 0xC0000)){
+					Store(0xC0000, EM1B)	/* Hole above C0000 and below E0000 */
+					Subtract(LOMH, 0xC0000, EM1L)	/* subtract start, assumes allocation from C0000 going up */
+				}
+
+				/* Set size of memory from 1MB to TopMem */
+				Subtract(TOM1, 0x100000, DMLL)
+
+				/*
+				* If(LNotEqual(TOM2, 0x00000000)){
+				*	Store(0x100000000,DMHB)			DRAM from 4GB to TopMem2
+				*	Subtract(TOM2, 0x100000000, DMHL)
+				* }
+				*/
+
+				/* If there is no memory above 4GB, put the BIOS just below 4GB */
+				If(LEqual(TOM2, 0x00000000)){
+					Store(PBAD,PBMB)			/* Reserve the "BIOS" space */
+					Store(PBLN,PBML)
+				}
+				Else {  /* Otherwise, put the BIOS just below 16EB */
+					ShiftLeft(PBAD,16,EBMB)		/* Reserve the "BIOS" space */
+					Store(PBLN,EBML)
+				}
+#endif
+                                CreateDWordField(CRES, ^MMIO._BAS, MM1B)
+                                CreateDWordField(CRES, ^MMIO._LEN, MM1L)
+                                /*
+                                 * Declare memory between TOM1 and 4GB as available
+                                 * for PCI MMIO.
+                                 * Use ShiftLeft to avoid 64bit constant (for XP).
+                                 * This will work even if the OS does 32bit arithmetic, as
+                                 * 32bit (0x00000000 - TOM1) will wrap and give the same
+                                 * result as 64bit (0x100000000 - TOM1).
+                                 */
+                                Store(TOM1, MM1B)
+                                ShiftLeft(0x10000000, 4, Local0)
+                                Subtract(Local0, TOM1, Local0)
+                                Store(Local0, MM1L)
+
+				Return(CRES) /* note to change the Name buffer */
+			}  /* end of Method(_SB.PCI0._CRS) */
+
+			/*
+			*
+			*               FIRST METHOD CALLED UPON BOOT
+			*
+			*  1. If debugging, print current OS and ACPI interpreter.
+			*  2. Get PCI Interrupt routing from ACPI VSM, this
+			*     value is based on user choice in BIOS setup.
+			*/
+			Method(_INI, 0) {
+				/* DBGO("\\_SB\\_INI\n") */
+				/* DBGO("   DSDT.ASL code from ") */
+				/* DBGO(__DATE__) */
+				/* DBGO(" ") */
+				/* DBGO(__TIME__) */
+				/* DBGO("\n   Sleep states supported: ") */
+				/* DBGO("\n") */
+				/* DBGO("   \\_OS=") */
+				/* DBGO(\_OS) */
+				/* DBGO("\n   \\_REV=") */
+				/* DBGO(\_REV) */
+				/* DBGO("\n") */
+
+				/* Determine the OS we're running on */
+				CkOT()
+
+				/* On older chips, clear PciExpWakeDisEn */
+				/*if (LLessEqual(\SBRI, 0x13)) {
+				*    	Store(0,\PWDE)
+				* }
+				*/
+			} /* End Method(_SB._INI) */
+		} /* End Device(PCI0)  */
+
+		Device(PWRB) {	/* Start Power button device */
+			Name(_HID, EISAID("PNP0C0C"))
+			Name(_UID, 0xAA)
+			Name(_PRW, Package () {3, 0x04})	/* wake from S1-S4 */
+			Name(_STA, 0x0B) /* sata is invisible */
+		}
+	} /* End \_SB scope */
+
+	Scope(\_SI) {
+		Method(_SST, 1) {
+			/* DBGO("\\_SI\\_SST\n") */
+			/* DBGO("   New Indicator state: ") */
+			/* DBGO(Arg0) */
+			/* DBGO("\n") */
+		}
+	} /* End Scope SI */
+#if 0
+	/* SMBUS Support */
+	Mutex (SBX0, 0x00)
+	OperationRegion (SMB0, SystemIO, 0xB00, 0x0C)
+		Field (SMB0, ByteAcc, NoLock, Preserve) {
+			HSTS,   8, /* SMBUS status */
+			SSTS,   8,  /* SMBUS slave status */
+			HCNT,   8,  /* SMBUS control */
+			HCMD,   8,  /* SMBUS host cmd */
+			HADD,   8,  /* SMBUS address */
+			DAT0,   8,  /* SMBUS data0 */
+			DAT1,   8,  /* SMBUS data1 */
+			BLKD,   8,  /* SMBUS block data */
+			SCNT,   8,  /* SMBUS slave control */
+			SCMD,   8,  /* SMBUS shaow cmd */
+			SEVT,   8,  /* SMBUS slave event */
+			SDAT,   8  /* SMBUS slave data */
+	}
+
+	Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */
+		Store (0x1E, HSTS)
+		Store (0xFA, Local0)
+		While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) {
+			Stall (0x64)
+			Decrement (Local0)
+		}
+
+		Return (Local0)
+	}
+
+	Method (SWTC, 1, NotSerialized) {
+		Store (Arg0, Local0)
+		Store (0x07, Local2)
+		Store (One, Local1)
+		While (LEqual (Local1, One)) {
+			Store (And (HSTS, 0x1E), Local3)
+			If (LNotEqual (Local3, Zero)) { /* read sucess */
+				If (LEqual (Local3, 0x02)) {
+					Store (Zero, Local2)
+				}
+
+				Store (Zero, Local1)
+			}
+			Else {
+				If (LLess (Local0, 0x0A)) { /* read failure */
+					Store (0x10, Local2)
+					Store (Zero, Local1)
+				}
+				Else {
+					Sleep (0x0A) /* 10 ms, try again */
+					Subtract (Local0, 0x0A, Local0)
+				}
+			}
+		}
+
+		Return (Local2)
+	}
+
+	Method (SMBR, 3, NotSerialized) {
+		Store (0x07, Local0)
+		If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) {
+			Store (WCLR (), Local0) /* clear SMBUS status register before read data */
+			If (LEqual (Local0, Zero)) {
+				Release (SBX0)
+				Return (0x0)
+			}
+
+			Store (0x1F, HSTS)
+			Store (Or (ShiftLeft (Arg1, One), One), HADD)
+			Store (Arg2, HCMD)
+			If (LEqual (Arg0, 0x07)) {
+				Store (0x48, HCNT) /* read byte */
+			}
+
+			Store (SWTC (0x03E8), Local1) /* 1000 ms */
+			If (LEqual (Local1, Zero)) {
+				If (LEqual (Arg0, 0x07)) {
+					Store (DAT0, Local0)
+				}
+			}
+			Else {
+				Store (Local1, Local0)
+			}
+
+			Release (SBX0)
+		}
+
+		/* DBGO("the value of SMBusData0 register ") */
+		/* DBGO(Arg2) */
+		/* DBGO(" is ") */
+		/* DBGO(Local0) */
+		/* DBGO("\n") */
+
+		Return (Local0)
+	}
+
+	/* THERMAL */
+	Scope(\_TZ) {
+		Name (KELV, 2732)
+		Name (THOT, 800)
+		Name (TCRT, 850)
+
+		ThermalZone(TZ00) {
+			Method(_AC0,0) {	/* Active Cooling 0 (0=highest fan speed) */
+				/* DBGO("\\_TZ\\TZ00\\_AC0\n") */
+				Return(Add(0, 2730))
+			}
+			Method(_AL0,0) {	/* Returns package of cooling device to turn on */
+				/* DBGO("\\_TZ\\TZ00\\_AL0\n") */
+				Return(Package() {\_TZ.TZ00.FAN0})
+			}
+			Device (FAN0) {
+				Name(_HID, EISAID("PNP0C0B"))
+				Name(_PR0, Package() {PFN0})
+			}
+
+			PowerResource(PFN0,0,0) {
+				Method(_STA) {
+					Store(0xF,Local0)
+					Return(Local0)
+				}
+				Method(_ON) {
+					/* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */
+				}
+				Method(_OFF) {
+					/* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */
+				}
+			}
+
+			Method(_HOT,0) {	/* return hot temp in tenths degree Kelvin */
+				/* DBGO("\\_TZ\\TZ00\\_HOT\n") */
+				Return (Add (THOT, KELV))
+			}
+			Method(_CRT,0) {	/* return critical temp in tenths degree Kelvin */
+				/* DBGO("\\_TZ\\TZ00\\_CRT\n") */
+				Return (Add (TCRT, KELV))
+			}
+			Method(_TMP,0) {	/* return current temp of this zone */
+				Store (SMBR (0x07, 0x4C,, 0x00), Local0)
+				If (LGreater (Local0, 0x10)) {
+					Store (Local0, Local1)
+				}
+				Else {
+					Add (Local0, THOT, Local0)
+					Return (Add (400, KELV))
+				}
+
+				Store (SMBR (0x07, 0x4C, 0x01), Local0)
+				/* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */
+				/* Store (SMBR (0x07, 0x4C, 0x10), Local2) */
+				If (LGreater (Local0, 0x10)) {
+					If (LGreater (Local0, Local1)) {
+						Store (Local0, Local1)
+					}
+
+					Multiply (Local1, 10, Local1)
+					Return (Add (Local1, KELV))
+				}
+				Else {
+					Add (Local0, THOT, Local0)
+					Return (Add (400 , KELV))
+				}
+			} /* end of _TMP */
+		} /* end of TZ00 */
+	}
+#endif
+}
+/* End of ASL file */
diff --git a/src/mainboard/avalue/eax-785e/fadt.c b/src/mainboard/avalue/eax-785e/fadt.c
new file mode 100644
index 0000000..f84b379
--- /dev/null
+++ b/src/mainboard/avalue/eax-785e/fadt.c
@@ -0,0 +1,188 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*
+ * ACPI - create the Fixed ACPI Description Tables (FADT)
+ */
+
+#include <string.h>
+#include <console/console.h>
+#include <arch/acpi.h>
+#include <arch/io.h>
+#include <device/device.h>
+#include "SBPLATFORM.h"
+
+void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
+{
+	u16 val = 0;
+	acpi_header_t *header = &(fadt->header);
+
+	printk(BIOS_DEBUG, "ACPI_BLK_BASE: 0x%04x\n", ACPI_BLK_BASE);
+
+	/* Prepare the header */
+	memset((void *)fadt, 0, sizeof(acpi_fadt_t));
+	memcpy(header->signature, "FACP", 4);
+	header->length = 244;
+	header->revision = 3;
+	memcpy(header->oem_id, OEM_ID, 6);
+	memcpy(header->oem_table_id, "COREBOOT", 8);
+	memcpy(header->asl_compiler_id, ASLC, 4);
+	header->asl_compiler_revision = 0;
+
+	fadt->firmware_ctrl = (u32) facs;
+	fadt->dsdt = (u32) dsdt;
+	/* 3=Workstation,4=Enterprise Server, 7=Performance Server */
+	fadt->preferred_pm_profile = 0x03;
+	fadt->sci_int = 9;
+	/* disable system management mode by setting to 0: */
+	fadt->smi_cmd = 0;
+	fadt->acpi_enable = 0xf0;
+	fadt->acpi_disable = 0xf1;
+	fadt->s4bios_req = 0x0;
+	fadt->pstate_cnt = 0xe2;
+
+	val = PM1_EVT_BLK_ADDRESS;
+	WritePMIO(SB_PMIOA_REG60, AccWidthUint16, &val);
+	val = PM1_CNT_BLK_ADDRESS;
+	WritePMIO(SB_PMIOA_REG62, AccWidthUint16, &val);
+	val = PM1_TMR_BLK_ADDRESS;
+	WritePMIO(SB_PMIOA_REG64, AccWidthUint16, &val);
+	val = GPE0_BLK_ADDRESS;
+	WritePMIO(SB_PMIOA_REG68, AccWidthUint16, &val);
+
+	/* CpuControl is in \_PR.CPU0, 6 bytes */
+	val = CPU_CNT_BLK_ADDRESS;
+	WritePMIO(SB_PMIOA_REG66, AccWidthUint16, &val);
+	val = 0;
+	WritePMIO(SB_PMIOA_REG6A, AccWidthUint16, &val);
+	val = ACPI_PMA_CNT_BLK_ADDRESS;
+	WritePMIO(SB_PMIOA_REG6C, AccWidthUint16, &val);
+
+	/* AcpiDecodeEnable, When set, SB uses the contents of the
+	 * PM registers at index 60-6B to decode ACPI I/O address.
+	 * AcpiSmiEn & SmiCmdEn*/
+	val = BIT0 | BIT1 | BIT2 | BIT4;
+	WritePMIO(SB_PMIOA_REG74, AccWidthUint16, &val);
+
+	/* RTC_En_En, TMR_En_En, GBL_EN_EN */
+	outl(0x1, PM1_CNT_BLK_ADDRESS);		  /* set SCI_EN */
+
+	fadt->pm1a_evt_blk = PM1_EVT_BLK_ADDRESS;
+	fadt->pm1b_evt_blk = 0x0000;
+	fadt->pm1a_cnt_blk = PM1_CNT_BLK_ADDRESS;
+	fadt->pm1b_cnt_blk = 0x0000;
+	fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK_ADDRESS;
+	fadt->pm_tmr_blk = PM1_TMR_BLK_ADDRESS;
+	fadt->gpe0_blk = GPE0_BLK_ADDRESS;
+	fadt->gpe1_blk = 0x0000;	/* we dont have gpe1 block, do we? */
+
+	fadt->pm1_evt_len = 4;
+	fadt->pm1_cnt_len = 2;
+	fadt->pm2_cnt_len = 1;
+	fadt->pm_tmr_len = 4;
+	fadt->gpe0_blk_len = 8;
+	fadt->gpe1_blk_len = 0;
+	fadt->gpe1_base = 0;
+
+	fadt->cst_cnt = 0xe3;
+	fadt->p_lvl2_lat = 101;
+	fadt->p_lvl3_lat = 1001;
+	fadt->flush_size = 0;
+	fadt->flush_stride = 0;
+	fadt->duty_offset = 1;
+	fadt->duty_width = 3;
+	fadt->day_alrm = 0;	/* 0x7d these have to be */
+	fadt->mon_alrm = 0;	/* 0x7e added to cmos.layout */
+	fadt->century = 0;	/* 0x7f to make rtc alrm work */
+	fadt->iapc_boot_arch = 0x3;	/* See table 5-11 */
+	fadt->flags = 0x0001c1a5;/* 0x25; */
+
+	fadt->res2 = 0;
+
+	fadt->reset_reg.space_id = 1;
+	fadt->reset_reg.bit_width = 8;
+	fadt->reset_reg.bit_offset = 0;
+	fadt->reset_reg.resv = 0;
+	fadt->reset_reg.addrl = 0xcf9;
+	fadt->reset_reg.addrh = 0x0;
+
+	fadt->reset_value = 6;
+	fadt->x_firmware_ctl_l = (u32) facs;
+	fadt->x_firmware_ctl_h = 0;
+	fadt->x_dsdt_l = (u32) dsdt;
+	fadt->x_dsdt_h = 0;
+
+	fadt->x_pm1a_evt_blk.space_id = 1;
+	fadt->x_pm1a_evt_blk.bit_width = 32;
+	fadt->x_pm1a_evt_blk.bit_offset = 0;
+	fadt->x_pm1a_evt_blk.resv = 0;
+	fadt->x_pm1a_evt_blk.addrl = PM1_EVT_BLK_ADDRESS;
+	fadt->x_pm1a_evt_blk.addrh = 0x0;
+
+	fadt->x_pm1b_evt_blk.space_id = 1;
+	fadt->x_pm1b_evt_blk.bit_width = 4;
+	fadt->x_pm1b_evt_blk.bit_offset = 0;
+	fadt->x_pm1b_evt_blk.resv = 0;
+	fadt->x_pm1b_evt_blk.addrl = 0x0;
+	fadt->x_pm1b_evt_blk.addrh = 0x0;
+
+	fadt->x_pm1a_cnt_blk.space_id = 1;
+	fadt->x_pm1a_cnt_blk.bit_width = 16;
+	fadt->x_pm1a_cnt_blk.bit_offset = 0;
+	fadt->x_pm1a_cnt_blk.resv = 0;
+	fadt->x_pm1a_cnt_blk.addrl = PM1_CNT_BLK_ADDRESS;
+	fadt->x_pm1a_cnt_blk.addrh = 0x0;
+
+	fadt->x_pm1b_cnt_blk.space_id = 1;
+	fadt->x_pm1b_cnt_blk.bit_width = 2;
+	fadt->x_pm1b_cnt_blk.bit_offset = 0;
+	fadt->x_pm1b_cnt_blk.resv = 0;
+	fadt->x_pm1b_cnt_blk.addrl = 0x0;
+	fadt->x_pm1b_cnt_blk.addrh = 0x0;
+
+	fadt->x_pm2_cnt_blk.space_id = 1;
+	fadt->x_pm2_cnt_blk.bit_width = 0;
+	fadt->x_pm2_cnt_blk.bit_offset = 0;
+	fadt->x_pm2_cnt_blk.resv = 0;
+	fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK_ADDRESS;
+	fadt->x_pm2_cnt_blk.addrh = 0x0;
+
+	fadt->x_pm_tmr_blk.space_id = 1;
+	fadt->x_pm_tmr_blk.bit_width = 32;
+	fadt->x_pm_tmr_blk.bit_offset = 0;
+	fadt->x_pm_tmr_blk.resv = 0;
+	fadt->x_pm_tmr_blk.addrl = PM1_TMR_BLK_ADDRESS;
+	fadt->x_pm_tmr_blk.addrh = 0x0;
+
+	fadt->x_gpe0_blk.space_id = 1;
+	fadt->x_gpe0_blk.bit_width = 32;
+	fadt->x_gpe0_blk.bit_offset = 0;
+	fadt->x_gpe0_blk.resv = 0;
+	fadt->x_gpe0_blk.addrl = GPE0_BLK_ADDRESS;
+	fadt->x_gpe0_blk.addrh = 0x0;
+
+	fadt->x_gpe1_blk.space_id = 1;
+	fadt->x_gpe1_blk.bit_width = 0;
+	fadt->x_gpe1_blk.bit_offset = 0;
+	fadt->x_gpe1_blk.resv = 0;
+	fadt->x_gpe1_blk.addrl = 0;
+	fadt->x_gpe1_blk.addrh = 0x0;
+
+	header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t));
+}
diff --git a/src/mainboard/avalue/eax-785e/get_bus_conf.c b/src/mainboard/avalue/eax-785e/get_bus_conf.c
new file mode 100644
index 0000000..20a856e
--- /dev/null
+++ b/src/mainboard/avalue/eax-785e/get_bus_conf.c
@@ -0,0 +1,154 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <string.h>
+#include <stdint.h>
+#include <stdlib.h>
+#if CONFIG_LOGICAL_CPUS==1
+#include <cpu/amd/multicore.h>
+#endif
+#include <cpu/amd/amdfam10_sysconf.h>
+#if CONFIG_AMD_SB_CIMX == 1
+#include <sb_cimx.h>
+#endif
+
+/* Global variables for MB layouts and these will be shared by irqtable mptable
+* and acpi_tables busnum is default.
+*/
+int bus_isa;
+u8 bus_rs780[11];
+u8 bus_sb800[3];
+u32 apicid_sb800;
+
+/*
+* Here you only need to set value in pci1234 for HT-IO that could be installed or not
+* You may need to preset pci1234 for HTIO board,
+* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
+*/
+u32 pci1234x[] = {
+	0x0000ff0,
+};
+
+/*
+* HT Chain device num, actually it is unit id base of every ht device in chain,
+* assume every chain only have 4 ht device at most
+*/
+u32 hcdnx[] = {
+	0x20202020,
+};
+
+u32 bus_type[256];
+
+u32 sbdn_rs780;
+u32 sbdn_sb800;
+
+extern void get_pci1234(void);
+
+static u32 get_bus_conf_done = 0;
+
+void get_bus_conf(void)
+{
+	u32 apicid_base;
+	device_t dev;
+	int i, j;
+
+	if (get_bus_conf_done == 1)
+		return;		/* do it only once */
+	get_bus_conf_done = 1;
+
+	sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
+	for (i = 0; i < sysconf.hc_possible_num; i++) {
+		sysconf.pci1234[i] = pci1234x[i];
+		sysconf.hcdn[i] = hcdnx[i];
+	}
+
+	get_pci1234();
+
+	sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
+	sbdn_rs780 = sysconf.sbdn;
+	sbdn_sb800 = 0;
+
+	for (i = 0; i < 3; i++) {
+		bus_sb800[i] = 0;
+	}
+	for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) {
+		bus_rs780[i] = 0;
+	}
+
+	for (i = 0; i < 256; i++) {
+		bus_type[i] = 0; /* default ISA bus. */
+	}
+
+	bus_type[0] = 1;	/* pci */
+
+	bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff;
+	bus_sb800[0] = bus_rs780[0];
+
+	bus_type[bus_rs780[0]] = 1;
+
+	/* sb800 */
+	dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4));
+	if (dev) {
+		bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+		bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+		bus_isa++;
+		for (j = bus_sb800[1]; j < bus_isa; j++)
+			bus_type[j] = 1;
+	}
+
+	for (i = 0; i < 4; i++) {
+		dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x15, i));
+		if (dev) {
+			bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+			bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+			bus_isa++;
+		}
+	}
+	for (j = bus_sb800[2]; j < bus_isa; j++)
+		bus_type[j] = 1;
+
+	/* rs780 */
+	for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) {
+		dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0));
+		if (dev) {
+			bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+			if(255 != bus_rs780[i]) {
+				bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+				bus_isa++;
+				bus_type[bus_rs780[i]] = 1; /* PCI bus. */
+			}
+		}
+	}
+
+	/* I/O APICs:   APIC ID Version State   Address */
+	bus_isa = 10;
+#if CONFIG_LOGICAL_CPUS==1
+	apicid_base = get_apicid_base(1);
+#else
+	apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
+#endif
+	apicid_sb800 = apicid_base + 0;
+
+#if CONFIG_AMD_SB_CIMX == 1
+	sb_Late_Post();
+#endif
+}
diff --git a/src/mainboard/avalue/eax-785e/irq_tables.c b/src/mainboard/avalue/eax-785e/irq_tables.c
new file mode 100644
index 0000000..fd74e3a
--- /dev/null
+++ b/src/mainboard/avalue/eax-785e/irq_tables.c
@@ -0,0 +1,111 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/pirq_routing.h>
+#include <cpu/amd/amdfam10_sysconf.h>
+
+static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
+			    u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
+			    u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
+			    u8 slot, u8 rfu)
+{
+	pirq_info->bus = bus;
+	pirq_info->devfn = devfn;
+	pirq_info->irq[0].link = link0;
+	pirq_info->irq[0].bitmap = bitmap0;
+	pirq_info->irq[1].link = link1;
+	pirq_info->irq[1].bitmap = bitmap1;
+	pirq_info->irq[2].link = link2;
+	pirq_info->irq[2].bitmap = bitmap2;
+	pirq_info->irq[3].link = link3;
+	pirq_info->irq[3].bitmap = bitmap3;
+	pirq_info->slot = slot;
+	pirq_info->rfu = rfu;
+}
+
+extern u8 bus_isa;
+extern u8 bus_rs780[8];
+extern u8 bus_sb800[2];
+extern unsigned long sbdn_sb800;
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+	struct irq_routing_table *pirq;
+	struct irq_info *pirq_info;
+	u32 slot_num;
+	u8 *v;
+
+	u8 sum = 0;
+	int i;
+
+	get_bus_conf();		/* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */
+
+	/* Align the table to be 16 byte aligned. */
+	addr += 15;
+	addr &= ~15;
+
+	/* This table must be betweeen 0xf0000 & 0x100000 */
+	printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
+
+	pirq = (void *)(addr);
+	v = (u8 *) (addr);
+
+	pirq->signature = PIRQ_SIGNATURE;
+	pirq->version = PIRQ_VERSION;
+
+	pirq->rtr_bus = bus_sb800[0];
+	pirq->rtr_devfn = ((sbdn_sb800 + 0x14) << 3) | 4;
+
+	pirq->exclusive_irqs = 0;
+
+	pirq->rtr_vendor = 0x1002;
+	pirq->rtr_device = 0x4384;
+
+	pirq->miniport_data = 0;
+
+	memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+	pirq_info = (void *)(&pirq->checksum + 1);
+	slot_num = 0;
+
+	/* pci bridge */
+	write_pirq_info(pirq_info, bus_sb800[0], ((sbdn_sb800 + 0x14) << 3) | 4,
+			0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
+			0);
+	pirq_info++;
+	slot_num++;
+
+	pirq->size = 32 + 16 * slot_num;
+
+	for (i = 0; i < pirq->size; i++)
+		sum += v[i];
+
+	sum = pirq->checksum - sum;
+	if (sum != pirq->checksum) {
+		pirq->checksum = sum;
+	}
+
+	printk(BIOS_INFO, "write_pirq_routing_table done.\n");
+
+	return (unsigned long)pirq_info;
+}
diff --git a/src/mainboard/avalue/eax-785e/mainboard.c b/src/mainboard/avalue/eax-785e/mainboard.c
new file mode 100644
index 0000000..7f55c03
--- /dev/null
+++ b/src/mainboard/avalue/eax-785e/mainboard.c
@@ -0,0 +1,148 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <boot/tables.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <device/pci_def.h>
+#include "SBPLATFORM.h"
+#include "chip.h"
+
+uint64_t uma_memory_base, uma_memory_size;
+
+u8 is_dev3_present(void);
+void set_pcie_dereset(void);
+void set_pcie_reset(void);
+void enable_int_gfx(void);
+
+/* GPIO6. */
+void enable_int_gfx(void)
+{
+	volatile u8 *gpio_reg;
+
+#ifdef UNUSED_CODE
+	RWPMIO(SB_PMIOA_REGEA, AccWidthUint8, ~(BIT0), BIT0); /* Disable the PCIB */
+	RWPMIO(SB_PMIOA_REGF6, AccWidthUint8, ~(BIT0), BIT0); /* Disable Gec */
+#endif
+	/* make sure the Acpi MMIO(fed80000) is accessible */
+        RWPMIO(SB_PMIOA_REG24, AccWidthUint8, ~(BIT0), BIT0);
+
+	gpio_reg = (volatile u8 *)ACPI_MMIO_BASE + 0xD00; /* IoMux Register */
+
+	*(gpio_reg + 0x6) = 0x1; /* Int_vga_en */
+	*(gpio_reg + 170) = 0x1; /* gpio_gate */
+
+	gpio_reg = (volatile u8 *)ACPI_MMIO_BASE + 0x100; /* GPIO Registers */
+
+	*(gpio_reg + 0x6) = 0x8;
+	*(gpio_reg + 170) = 0x0;
+}
+
+void set_pcie_dereset()
+{
+}
+
+void set_pcie_reset(void)
+{
+}
+
+u8 is_dev3_present(void)
+{
+	return 1;
+}
+
+
+/*************************************************
+* enable the dedicated function in EAX-785E board.
+* This function called early than rs780_enable.
+*************************************************/
+static void eax_785e(device_t dev)
+{
+	/* Leave it for furture use. */
+	/* struct mainboard_config *mainboard =
+	   (struct mainboard_config *)dev->chip_info; */
+
+	printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
+
+#if (CONFIG_GFXUMA == 1)
+	msr_t msr, msr2;
+
+	/* TOP_MEM: the top of DRAM below 4G */
+	msr = rdmsr(TOP_MEM);
+	printk
+	    (BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
+	     __func__, msr.lo, msr.hi);
+
+	/* TOP_MEM2: the top of DRAM above 4G */
+	msr2 = rdmsr(TOP_MEM2);
+	printk
+	    (BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
+	     __func__, msr2.lo, msr2.hi);
+
+	/* refer to UMA Size Consideration in 780 BDG. */
+	switch (msr.lo) {
+	case 0x10000000:	/* 256M system memory */
+		uma_memory_size = 0x4000000;	/* 64M recommended UMA */
+		break;
+
+	case 0x20000000:	/* 512M system memory */
+		uma_memory_size = 0x8000000;	/* 128M recommended UMA */
+		break;
+
+	default:		/* 1GB and above system memory */
+		uma_memory_size = 0x10000000;	/* 256M recommended UMA */
+		break;
+	}
+
+	uma_memory_base = msr.lo - uma_memory_size;	/* TOP_MEM1 */
+	printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n",
+		    __func__, uma_memory_size, uma_memory_base);
+
+	/* TODO: TOP_MEM2 */
+#else
+	uma_memory_size = 0x8000000;	/* 128M recommended UMA */
+	uma_memory_base = 0x38000000;	/* 1GB  system memory supposed */
+#endif
+
+	set_pcie_dereset();
+	enable_int_gfx();
+}
+
+int add_mainboard_resources(struct lb_memory *mem)
+{
+	/* UMA is removed from system memory in the northbridge code, but
+	 * in some circumstances we want the memory mentioned as reserved.
+	 */
+#if (CONFIG_GFXUMA == 1)
+	printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n",
+		    uma_memory_base, uma_memory_size);
+	lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base,
+			    uma_memory_size);
+#endif
+	return 0;
+}
+
+struct chip_operations mainboard_ops = {
+	CHIP_NAME(CONFIG_MAINBOARD_VENDOR " " CONFIG_MAINBOARD_PART_NUMBER " Mainboard")
+	.enable_dev = eax_785e,
+};
diff --git a/src/mainboard/avalue/eax-785e/mb_sysconf.h b/src/mainboard/avalue/eax-785e/mb_sysconf.h
new file mode 100644
index 0000000..ca5870c
--- /dev/null
+++ b/src/mainboard/avalue/eax-785e/mb_sysconf.h
@@ -0,0 +1,43 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#ifndef MB_SYSCONF_H
+#define MB_SYSCONF_H
+
+struct mb_sysconf_t {
+	u8 bus_isa;
+	u8 bus_8132_0;
+	u8 bus_8132_1;
+	u8 bus_8132_2;
+	u8 bus_8111_0;
+	u8 bus_8111_1;
+	u8 bus_8132a[31][3];
+	u8 bus_8151[31][2];
+
+	u32 apicid_8111;
+	u32 apicid_8132_1;
+	u32 apicid_8132_2;
+	u32 apicid_8132a[31][2];
+	u32 sbdn3;
+	u32 sbdn3a[31];
+	u32 sbdn5[31];
+	u32 bus_type[256];
+};
+
+#endif
diff --git a/src/mainboard/avalue/eax-785e/mptable.c b/src/mainboard/avalue/eax-785e/mptable.c
new file mode 100644
index 0000000..e4fc23b
--- /dev/null
+++ b/src/mainboard/avalue/eax-785e/mptable.c
@@ -0,0 +1,158 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <string.h>
+#include <stdint.h>
+#include <SBPLATFORM.h>
+#include <cpu/amd/amdfam10_sysconf.h>
+
+extern int bus_isa;
+extern u8 bus_rs780[11];
+extern u8 bus_sb800[2];
+extern u32 apicid_sb800;
+extern u32 bus_type[256];
+extern u32 sbdn_rs780;
+extern u32 sbdn_sb800;
+
+u8 intr_data[] = {
+	[0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */
+	[0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */
+	[0x10] = 0x1F,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	0x10,0x11,0x12,0x13
+};
+
+static void *smp_write_config_table(void *v)
+{
+	struct mp_config_table *mc;
+	u32 dword;
+	u8 byte;
+
+	mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+
+	mptable_init(mc, LAPIC_ADDR);
+
+	smp_write_processors(mc);
+
+	get_bus_conf();
+
+	mptable_write_buses(mc, NULL, &bus_isa);
+
+	/* I/O APICs:   APIC ID Version State   Address */
+	ReadPMIO(SB_PMIOA_REG34, AccWidthUint32, &dword);
+	dword &= 0xFFFFFFF0;
+
+	smp_write_ioapic(mc, apicid_sb800, 0x11, dword);
+
+	for (byte = 0x0; byte < sizeof(intr_data); byte ++) {
+		outb(byte | 0x80, 0xC00);
+		outb(intr_data[byte], 0xC01);
+	}
+
+	/* I/O Ints:    Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN# */
+#define IO_LOCAL_INT(type, intr, apicid, pin) \
+	smp_write_intsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
+
+	mptable_add_isa_interrupts(mc, bus_isa, apicid_sb800, 0);
+
+	/* PCI interrupts are level triggered, and are
+	 * associated with a specific bus/device/function tuple.
+	 */
+#if CONFIG_GENERATE_ACPI_TABLES == 0
+#define PCI_INT(bus, dev, fn, pin) \
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb800, (pin))
+#else
+#define PCI_INT(bus, dev, fn, pin)
+#endif
+
+	PCI_INT(0x0, 0x14, 0x0, 0x10);
+	/* HD Audio: */
+	PCI_INT(0x0, 0x14, 0x2, 0x12);
+	PCI_INT(0x0, 0x14, 0x4, 0x11);
+
+	PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]); /* USB */
+	PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]);
+	PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]);
+	PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]);
+	PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]);
+	PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]);
+
+	/* sata */
+	PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]);
+
+	/* on board NIC & Slot PCIE.  */
+	/* PCI_INT(bus_rs780[0x1], 0x5, 0x0, 0x12); */
+/* 	PCI_INT(bus_rs780[0x1], 0x5, 0x1, 0x13); */
+	PCI_INT(bus_rs780[0x2], 0x0, 0x0, 0x12); /* Dev 2, external GFX */
+	/* PCI_INT(bus_rs780[0x3], 0x0, 0x0, 0x13); */
+	PCI_INT(bus_rs780[0x4], 0x0, 0x0, 0x10);
+	/* configuration B doesnt need dev 5,6,7 */
+	/*
+	 * PCI_INT(bus_rs780[0x5], 0x0, 0x0, 0x11);
+	 * PCI_INT(bus_rs780[0x6], 0x0, 0x0, 0x12);
+	 * PCI_INT(bus_rs780[0x7], 0x0, 0x0, 0x13);
+	 */
+	PCI_INT(bus_rs780[0x9], 0x0, 0x0, 0x11);
+	PCI_INT(bus_rs780[0xA], 0x0, 0x0, 0x12); /* NIC */
+
+	/* PCI slots */
+	/* PCI_SLOT 0. */
+	PCI_INT(bus_sb800[1], 0x5, 0x0, 0x14);
+	PCI_INT(bus_sb800[1], 0x5, 0x1, 0x15);
+	PCI_INT(bus_sb800[1], 0x5, 0x2, 0x16);
+	PCI_INT(bus_sb800[1], 0x5, 0x3, 0x17);
+
+	/* PCI_SLOT 1. */
+	PCI_INT(bus_sb800[1], 0x6, 0x0, 0x15);
+	PCI_INT(bus_sb800[1], 0x6, 0x1, 0x16);
+	PCI_INT(bus_sb800[1], 0x6, 0x2, 0x17);
+	PCI_INT(bus_sb800[1], 0x6, 0x3, 0x14);
+
+	/* PCI_SLOT 2. */
+	PCI_INT(bus_sb800[1], 0x7, 0x0, 0x16);
+	PCI_INT(bus_sb800[1], 0x7, 0x1, 0x17);
+	PCI_INT(bus_sb800[1], 0x7, 0x2, 0x14);
+	PCI_INT(bus_sb800[1], 0x7, 0x3, 0x15);
+
+	/*Local Ints:   Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN# */
+	IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0);
+	IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1);
+	/* There is no extension information... */
+
+	/* Compute the checksums */
+	mc->mpe_checksum =
+	    smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
+	mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
+	printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n",
+		     mc, smp_next_mpe_entry(mc));
+	return smp_next_mpe_entry(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+	void *v;
+	v = smp_write_floating_table(addr);
+	return (unsigned long)smp_write_config_table(v);
+}
diff --git a/src/mainboard/avalue/eax-785e/platform_cfg.h b/src/mainboard/avalue/eax-785e/platform_cfg.h
new file mode 100644
index 0000000..24dcae0
--- /dev/null
+++ b/src/mainboard/avalue/eax-785e/platform_cfg.h
@@ -0,0 +1,235 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+#ifndef _EAX_785E_CFG_H_
+#define _EAX_785E_CFG_H_
+
+/**
+ * @def BIOS_SIZE_1M
+ * @def BIOS_SIZE_2M
+ * @def BIOS_SIZE_4M
+ * @def BIOS_SIZE_8M
+ */
+#define BIOS_SIZE_1M			0
+#define BIOS_SIZE_2M			1
+#define BIOS_SIZE_4M			3
+#define BIOS_SIZE_8M			7
+
+/* In SB800, default ROM size is 1M Bytes, if your platform ROM
+ * bigger than 1M you have to set the ROM size outside CIMx module and
+ * before AGESA module get call.
+ */
+#ifndef BIOS_SIZE
+#if CONFIG_COREBOOT_ROMSIZE_KB_1024 == 1
+  #define BIOS_SIZE BIOS_SIZE_1M
+#elif CONFIG_COREBOOT_ROMSIZE_KB_2048 == 1
+  #define BIOS_SIZE BIOS_SIZE_2M
+#elif CONFIG_COREBOOT_ROMSIZE_KB_4096 == 1
+  #define BIOS_SIZE BIOS_SIZE_4M
+#elif CONFIG_COREBOOT_ROMSIZE_KB_8192 == 1
+  #define BIOS_SIZE BIOS_SIZE_8M
+#endif
+#endif
+
+/**
+ * @def SPREAD_SPECTRUM
+ * @brief
+ *  0 - Disable Spread Spectrum function
+ *  1 - Enable  Spread Spectrum function
+ */
+#define SPREAD_SPECTRUM			0
+
+/**
+ * @def SB_HPET_TIMER
+ * @breif
+ *  0 - Disable hpet
+ *  1 - Enable  hpet
+ */
+#define HPET_TIMER			1
+
+/**
+ * @def USB_CONFIG
+ * @brief bit[0-6] used to control USB
+ *   0 - Disable
+ *   1 - Enable
+ *  Usb Ohci1 Contoller (Bus 0 Dev 18 Func0) is define at BIT0
+ *  Usb Ehci1 Contoller (Bus 0 Dev 18 Func2) is define at BIT1
+ *  Usb Ohci2 Contoller (Bus 0 Dev 19 Func0) is define at BIT2
+ *  Usb Ehci2 Contoller (Bus 0 Dev 19 Func2) is define at BIT3
+ *  Usb Ohci3 Contoller (Bus 0 Dev 22 Func0) is define at BIT4
+ *  Usb Ehci3 Contoller (Bus 0 Dev 22 Func2) is define at BIT5
+ *  Usb Ohci4 Contoller (Bus 0 Dev 20 Func5) is define at BIT6
+ */
+#define USB_CONFIG		0x7F
+
+/**
+ * @def PCI_CLOCK_CTRL
+ * @breif bit[0-4] used for PCI Slots Clock Control,
+ *   0 - disable
+ *   1 - enable
+ *  PCI SLOT 0 define at BIT0
+ *  PCI SLOT 1 define at BIT1
+ *  PCI SLOT 2 define at BIT2
+ *  PCI SLOT 3 define at BIT3
+ *  PCI SLOT 4 define at BIT4
+ */
+#define PCI_CLOCK_CTRL			0x1F
+
+/**
+ * @def SATA_CONTROLLER
+ * @breif INCHIP Sata Controller
+ */
+#define SATA_CONTROLLER		CIMX_OPTION_ENABLED
+
+/**
+ * @def SATA_MODE
+ * @breif INCHIP Sata Controller Mode
+ *   NOTE: DO NOT ALLOW SATA & IDE use same mode
+ */
+#define SATA_MODE			NATIVE_IDE_MODE
+
+/**
+ * @breif INCHIP Sata IDE Controller Mode
+ */
+#define IDE_LEGACY_MODE			0
+#define IDE_NATIVE_MODE			1
+
+/**
+ * @def SATA_IDE_MODE
+ * @breif INCHIP Sata IDE Controller Mode
+ *   NOTE: DO NOT ALLOW SATA & IDE use same mode
+ */
+#define SATA_IDE_MODE			IDE_LEGACY_MODE
+
+/**
+ * @def EXTERNAL_CLOCK
+ * @brief 00/10: Reference clock from crystal oscillator via
+ *  PAD_XTALI and PAD_XTALO
+ *
+ * @def INTERNAL_CLOCK
+ * @brief 01/11: Reference clock from internal clock through
+ *  CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL
+ */
+#define EXTERNAL_CLOCK		0x00
+#define INTERNAL_CLOCK		0x01
+
+/* NOTE: inagua have to using internal clock,
+ * otherwise can not detect sata drive
+ */
+#define SATA_CLOCK_SOURCE	INTERNAL_CLOCK
+
+/**
+ * @def SATA_PORT_MULT_CAP_RESERVED
+ * @brief 1 ON, 0 0FF
+ */
+#define SATA_PORT_MULT_CAP_RESERVED	1
+
+
+/**
+ * @def   AZALIA_AUTO
+ * @brief Detect Azalia controller automatically.
+ *
+ * @def   AZALIA_DISABLE
+ * @brief Disable Azalia controller.
+
+ * @def   AZALIA_ENABLE
+ * @brief Enable Azalia controller.
+ */
+#define AZALIA_AUTO			0
+#define AZALIA_DISABLE			1
+#define AZALIA_ENABLE			2
+
+/**
+ * @breif INCHIP HDA controller
+ */
+#define AZALIA_CONTROLLER		AZALIA_AUTO
+
+/**
+ * @def AZALIA_PIN_CONFIG
+ * @brief
+ *  0 - disable
+ *  1 - enable
+ */
+#define AZALIA_PIN_CONFIG		1
+
+/**
+ * @def AZALIA_SDIN_PIN
+ * @brief
+ *  SDIN0 is define at BIT0 & BIT1
+ *   00 - GPIO PIN
+ *   01 - Reserved
+ *   10 - As a Azalia SDIN pin
+ *  SDIN1 is define at BIT2 & BIT3
+ *  SDIN2 is define at BIT4 & BIT5
+ *  SDIN3 is define at BIT6 & BIT7
+ */
+//#define AZALIA_SDIN_PIN		0xAA
+#define AZALIA_SDIN_PIN			0x2A
+
+/**
+ * @def GPP_CONTROLLER
+ */
+#define GPP_CONTROLLER			CIMX_OPTION_ENABLED
+
+/**
+ * @def GPP_CFGMODE
+ * @brief GPP Link Configuration
+ * four possible configuration:
+ *  GPP_CFGMODE_X4000
+ *  GPP_CFGMODE_X2200
+ *  GPP_CFGMODE_X2110
+ *  GPP_CFGMODE_X1111
+ */
+#define GPP_CFGMODE			GPP_CFGMODE_X1111
+
+/**
+ * @def NB_SB_GEN2
+ *    0  - Disable
+ *    1  - Enable
+ */
+#define NB_SB_GEN2			TRUE
+
+/**
+ * @def SB_GEN2
+ *    0  - Disable
+ *    1  - Enable
+ */
+#define SB_GPP_GEN2			TRUE
+
+/**
+ * @def SB_GPP_UNHIDE_PORTS
+ *    TRUE   - ports visable always, even port empty
+ *    FALSE  - ports invisable if port empty
+ */
+#define SB_GPP_UNHIDE_PORTS		FALSE
+
+/**
+ * @def   GEC_CONFIG
+ *    0  - Enable
+ *    1  - Disable
+ */
+#define GEC_CONFIG			0
+
+/**
+ * @def SIO_HWM_BASE_ADDRESS  Super IO HWM base address
+ */
+#define SIO_HWM_BASE_ADDRESS		0x290
+
+#endif
diff --git a/src/mainboard/avalue/eax-785e/reset.c b/src/mainboard/avalue/eax-785e/reset.c
new file mode 100644
index 0000000..5212b3a
--- /dev/null
+++ b/src/mainboard/avalue/eax-785e/reset.c
@@ -0,0 +1,63 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <reset.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+
+#define HT_INIT_CONTROL		0x6C
+#define HTIC_BIOSR_Detect	(1<<5)
+
+#if CONFIG_MAX_PHYSICAL_CPUS > 32
+#define NODE_PCI(x, fn)	((x<32)?(PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)):(PCI_DEV((CONFIG_CBB-1),(CONFIG_CDB+x-32),fn)))
+#else
+#define NODE_PCI(x, fn)	PCI_DEV(CONFIG_CBB,(CONFIG_CDB+x),fn)
+#endif
+
+static inline void set_bios_reset(void)
+{
+	u32 nodes, htic;
+	device_t dev;
+	int i;
+
+	nodes = ((pci_read_config32(PCI_DEV(CONFIG_CBB, CONFIG_CDB, 0), 0x60) >> 4) & 7) + 1;
+	for (i = 0; i < nodes; i++) {
+		dev = NODE_PCI(i, 0);
+		htic = pci_read_config32(dev, HT_INIT_CONTROL);
+		htic &= ~HTIC_BIOSR_Detect;
+		pci_write_config32(dev, HT_INIT_CONTROL, htic);
+	}
+}
+
+void hard_reset(void)
+{
+	set_bios_reset();
+	/* Try rebooting through port 0xcf9 */
+	/* Actually it is not a real hard_reset --- it only reset coherent link table, but not reset link freq and width */
+	outb((0 << 3) | (0 << 2) | (1 << 1), 0xcf9);
+	outb((0 << 3) | (1 << 2) | (1 << 1), 0xcf9);
+}
+
+//SbReset();
+void soft_reset(void)
+{
+	set_bios_reset();
+	/* link reset */
+	outb(0x06, 0x0cf9);
+}
diff --git a/src/mainboard/avalue/eax-785e/resourcemap.c b/src/mainboard/avalue/eax-785e/resourcemap.c
new file mode 100644
index 0000000..06102b0
--- /dev/null
+++ b/src/mainboard/avalue/eax-785e/resourcemap.c
@@ -0,0 +1,278 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+static void setup_mb_resource_map(void)
+{
+	static const unsigned int register_values[] = {
+		/* Careful set limit registers before base registers which contain the enables */
+		/* DRAM Limit i Registers
+		 * F1:0x44 i = 0
+		 * F1:0x4C i = 1
+		 * F1:0x54 i = 2
+		 * F1:0x5C i = 3
+		 * F1:0x64 i = 4
+		 * F1:0x6C i = 5
+		 * F1:0x74 i = 6
+		 * F1:0x7C i = 7
+		 * [ 2: 0] Destination Node ID
+		 *	   000 = Node 0
+		 *	   001 = Node 1
+		 *	   010 = Node 2
+		 *	   011 = Node 3
+		 *	   100 = Node 4
+		 *	   101 = Node 5
+		 *	   110 = Node 6
+		 *	   111 = Node 7
+		 * [ 7: 3] Reserved
+		 * [10: 8] Interleave select
+		 *	   specifies the values of A[14:12] to use with interleave enable.
+		 * [15:11] Reserved
+		 * [31:16] DRAM Limit Address i Bits 39-24
+		 *	   This field defines the upper address bits of a 40 bit  address
+		 *	   that define the end of the DRAM region.
+		 */
+//		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CONFIG_CAR_FAM10
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007,
+		/* DRAM Base i Registers
+		 * F1:0x40 i = 0
+		 * F1:0x48 i = 1
+		 * F1:0x50 i = 2
+		 * F1:0x58 i = 3
+		 * F1:0x60 i = 4
+		 * F1:0x68 i = 5
+		 * F1:0x70 i = 6
+		 * F1:0x78 i = 7
+		 * [ 0: 0] Read Enable
+		 *	   0 = Reads Disabled
+		 *	   1 = Reads Enabled
+		 * [ 1: 1] Write Enable
+		 *	   0 = Writes Disabled
+		 *	   1 = Writes Enabled
+		 * [ 7: 2] Reserved
+		 * [10: 8] Interleave Enable
+		 *	   000 = No interleave
+		 *	   001 = Interleave on A[12] (2 nodes)
+		 *	   010 = reserved
+		 *	   011 = Interleave on A[12] and A[14] (4 nodes)
+		 *	   100 = reserved
+		 *	   101 = reserved
+		 *	   110 = reserved
+		 *	   111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+		 * [15:11] Reserved
+		 * [13:16] DRAM Base Address i Bits 39-24
+		 *	   This field defines the upper address bits of a 40-bit address
+		 *	   that define the start of the DRAM region.
+		 */
+//		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000,// don't touch it, we need it for CONFIG_CAR_FAM10
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000,
+
+		/* Memory-Mapped I/O Limit i Registers
+		 * F1:0x84 i = 0
+		 * F1:0x8C i = 1
+		 * F1:0x94 i = 2
+		 * F1:0x9C i = 3
+		 * F1:0xA4 i = 4
+		 * F1:0xAC i = 5
+		 * F1:0xB4 i = 6
+		 * F1:0xBC i = 7
+		 * [ 2: 0] Destination Node ID
+		 *	   000 = Node 0
+		 *	   001 = Node 1
+		 *	   010 = Node 2
+		 *	   011 = Node 3
+		 *	   100 = Node 4
+		 *	   101 = Node 5
+		 *	   110 = Node 6
+		 *	   111 = Node 7
+		 * [ 3: 3] Reserved
+		 * [ 5: 4] Destination Link ID
+		 *	   00 = Link 0
+		 *	   01 = Link 1
+		 *	   10 = Link 2
+		 *	   11 = Reserved
+		 * [ 6: 6] Reserved
+		 * [ 7: 7] Non-Posted
+		 *	   0 = CPU writes may be posted
+		 *	   1 = CPU writes must be non-posted
+		 * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+		 *	   This field defines the upp adddress bits of a 40-bit address that
+		 *	   defines the end of a memory-mapped I/O region n
+		 */
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000,
+//		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00,
+
+		/* Memory-Mapped I/O Base i Registers
+		 * F1:0x80 i = 0
+		 * F1:0x88 i = 1
+		 * F1:0x90 i = 2
+		 * F1:0x98 i = 3
+		 * F1:0xA0 i = 4
+		 * F1:0xA8 i = 5
+		 * F1:0xB0 i = 6
+		 * F1:0xB8 i = 7
+		 * [ 0: 0] Read Enable
+		 *	   0 = Reads disabled
+		 *	   1 = Reads Enabled
+		 * [ 1: 1] Write Enable
+		 *	   0 = Writes disabled
+		 *	   1 = Writes Enabled
+		 * [ 2: 2] Cpu Disable
+		 *	   0 = Cpu can use this I/O range
+		 *	   1 = Cpu requests do not use this I/O range
+		 * [ 3: 3] Lock
+		 *	   0 = base/limit registers i are read/write
+		 *	   1 = base/limit registers i are read-only
+		 * [ 7: 4] Reserved
+		 * [31: 8] Memory-Mapped I/O Base Address i (39-16)
+		 *	   This field defines the upper address bits of a 40bit address
+		 *	   that defines the start of memory-mapped I/O region i
+		 */
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000,
+//		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003,
+
+		/* PCI I/O Limit i Registers
+		 * F1:0xC4 i = 0
+		 * F1:0xCC i = 1
+		 * F1:0xD4 i = 2
+		 * F1:0xDC i = 3
+		 * [ 2: 0] Destination Node ID
+		 *	   000 = Node 0
+		 *	   001 = Node 1
+		 *	   010 = Node 2
+		 *	   011 = Node 3
+		 *	   100 = Node 4
+		 *	   101 = Node 5
+		 *	   110 = Node 6
+		 *	   111 = Node 7
+		 * [ 3: 3] Reserved
+		 * [ 5: 4] Destination Link ID
+		 *	   00 = Link 0
+		 *	   01 = Link 1
+		 *	   10 = Link 2
+		 *	   11 = reserved
+		 * [11: 6] Reserved
+		 * [24:12] PCI I/O Limit Address i
+		 *	   This field defines the end of PCI I/O region n
+		 * [31:25] Reserved
+		 */
+//		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x01fff000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000,
+
+		/* PCI I/O Base i Registers
+		 * F1:0xC0 i = 0
+		 * F1:0xC8 i = 1
+		 * F1:0xD0 i = 2
+		 * F1:0xD8 i = 3
+		 * [ 0: 0] Read Enable
+		 *	   0 = Reads Disabled
+		 *	   1 = Reads Enabled
+		 * [ 1: 1] Write Enable
+		 *	   0 = Writes Disabled
+		 *	   1 = Writes Enabled
+		 * [ 3: 2] Reserved
+		 * [ 4: 4] VGA Enable
+		 *	   0 = VGA matches Disabled
+		 *	   1 = matches all address < 64K and where A[9:0] is in the
+		 *	       range 3B0-3BB or 3C0-3DF independen of the base & limit registers
+		 * [ 5: 5] ISA Enable
+		 *	   0 = ISA matches Disabled
+		 *	   1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+		 *	       from matching agains this base/limit pair
+		 * [11: 6] Reserved
+		 * [24:12] PCI I/O Base i
+		 *	   This field defines the start of PCI I/O region n
+		 * [31:25] Reserved
+		 */
+//		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000003,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000,
+
+		/* Config Base and Limit i Registers
+		 * F1:0xE0 i = 0
+		 * F1:0xE4 i = 1
+		 * F1:0xE8 i = 2
+		 * F1:0xEC i = 3
+		 * [ 0: 0] Read Enable
+		 *	   0 = Reads Disabled
+		 *	   1 = Reads Enabled
+		 * [ 1: 1] Write Enable
+		 *	   0 = Writes Disabled
+		 *	   1 = Writes Enabled
+		 * [ 2: 2] Device Number Compare Enable
+		 *	   0 = The ranges are based on bus number
+		 *	   1 = The ranges are ranges of devices on bus 0
+		 * [ 3: 3] Reserved
+		 * [ 6: 4] Destination Node
+		 *	   000 = Node 0
+		 *	   001 = Node 1
+		 *	   010 = Node 2
+		 *	   011 = Node 3
+		 *	   100 = Node 4
+		 *	   101 = Node 5
+		 *	   110 = Node 6
+		 *	   111 = Node 7
+		 * [ 7: 7] Reserved
+		 * [ 9: 8] Destination Link
+		 *	   00 = Link 0
+		 *	   01 = Link 1
+		 *	   10 = Link 2
+		 *	   11 - Reserved
+		 * [15:10] Reserved
+		 * [23:16] Bus Number Base i
+		 *	   This field defines the lowest bus number in configuration region i
+		 * [31:24] Bus Number Limit i
+		 *	   This field defines the highest bus number in configuration regin i
+		 */
+//		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x06000003, // AMD 8111 on link0 of CPU 0
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000,
+		PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000,
+	};
+
+	int max;
+	max = ARRAY_SIZE(register_values);
+	setup_resource_map(register_values, max);
+}
diff --git a/src/mainboard/avalue/eax-785e/romstage.c b/src/mainboard/avalue/eax-785e/romstage.c
new file mode 100644
index 0000000..beea992
--- /dev/null
+++ b/src/mainboard/avalue/eax-785e/romstage.c
@@ -0,0 +1,266 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+//#define SYSTEM_TYPE 0	/* SERVER */
+#define SYSTEM_TYPE 1	/* DESKTOP */
+//#define SYSTEM_TYPE 2	/* MOBILE */
+
+//used by incoherent_ht
+#define FAM10_SCAN_PCI_BUS 0
+#define FAM10_ALLOCATE_IO_RANGE 0
+
+#include <lib.h>
+#include <stdint.h>
+#include <string.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include <console/console.h>
+#include <cpu/amd/model_10xxx_rev.h>
+#include "northbridge/amd/amdfam10/raminit.h"
+#include "northbridge/amd/amdfam10/amdfam10.h"
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/amd/amdfam10/reset_test.c"
+#include <console/loglevel.h>
+#include "cpu/x86/bist.h"
+#include "superio/winbond/w83627hf/early_serial.c"
+#include "cpu/x86/mtrr/earlymtrr.c"
+#include <cpu/amd/mtrr.h>
+#include "northbridge/amd/amdfam10/setup_resource_map.c"
+#include "southbridge/amd/rs780/early_setup.c"
+#include <sb_cimx.h>
+#include <SBPLATFORM.h> /* SB OEM constants */
+#include <southbridge/amd/cimx/sb800/smbus.h>
+#include "northbridge/amd/amdfam10/debug.c"
+
+static void activate_spd_rom(const struct mem_controller *ctrl)
+{
+}
+
+static int spd_read_byte(u32 device, u32 address)
+{
+	return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
+}
+
+#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c"
+#include "northbridge/amd/amdfam10/pci.c"
+#include "resourcemap.c"
+#include "cpu/amd/quadcore/quadcore.c"
+#include "cpu/amd/car/post_cache_as_ram.c"
+#include "cpu/amd/microcode/microcode.c"
+#if CONFIG_UPDATE_CPU_MICROCODE
+#include "cpu/amd/model_10xxx/update_microcode.c"
+#endif
+#include "cpu/amd/model_10xxx/init_cpus.c"
+#include "northbridge/amd/amdfam10/early_ht.c"
+#include "spd.h"
+
+#include <reset.h>
+void soft_reset(void)
+{
+	set_bios_reset();
+	/* link reset */
+	outb(0x06, 0x0cf9);
+}
+
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+	struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
+	static const u8 spd_addr[] = {RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, };
+	u32 bsp_apicid = 0, val;
+	msr_t msr;
+
+	if (!cpu_init_detectedx && boot_cpu()) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+		/* mov bsp to bus 0xff when > 8 nodes */
+		set_bsp_node_CHtExtNodeCfgEn();
+		enumerate_ht_chain();
+
+		//enable port80 decoding and southbridge poweron init
+		sb_Poweron_Init();
+	}
+
+	post_code(0x30);
+
+	if (bist == 0) {
+		bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); /* mmconf is inited in init_cpus */
+		/* All cores run this but the BSP(node0,core0) is the only core that returns. */
+	}
+
+	post_code(0x32);
+
+	enable_rs780_dev8();
+	sb800_clk_output_48Mhz();
+
+	w83627hf_set_clksel_48(PNP_DEV(CONFIG_SIO_PORT, 0));
+	w83627hf_enable_serial(0, CONFIG_TTYS0_BASE);
+
+	uart_init();
+	console_init();
+	printk(BIOS_DEBUG, "\n");
+
+//	dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE);
+
+	/* Halt if there was a built in self test failure */
+	report_bist_failure(bist);
+
+	// Load MPB
+	val = cpuid_eax(1);
+	printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val);
+	printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1);
+	printk(BIOS_DEBUG, "bsp_apicid = %02x \n", bsp_apicid);
+	printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx);
+
+	/* Setup sysinfo defaults */
+	set_sysinfo_in_ram(0);
+
+#if CONFIG_UPDATE_CPU_MICROCODE
+	update_microcode(val);
+#endif
+	post_code(0x33);
+
+	cpuSetAMDMSR();
+	post_code(0x34);
+
+	amd_ht_init(sysinfo);
+	post_code(0x35);
+
+	/* Setup nodes PCI space and start core 0 AP init. */
+	finalize_node_setup(sysinfo);
+
+	/* Setup any mainboard PCI settings etc. */
+	setup_mb_resource_map();
+	post_code(0x36);
+
+	/* wait for all the APs core0 started by finalize_node_setup. */
+	/* FIXME: A bunch of cores are going to start output to serial at once.
+	   It would be nice to fixup prink spinlocks for ROM XIP mode.
+	   I think it could be done by putting the spinlock flag in the cache
+	   of the BSP located right after sysinfo.
+	 */
+	wait_all_core0_started();
+
+#if CONFIG_LOGICAL_CPUS==1
+	/* Core0 on each node is configured. Now setup any additional cores. */
+	printk(BIOS_DEBUG, "start_other_cores()\n");
+	start_other_cores();
+	post_code(0x37);
+	wait_all_other_cores_started(bsp_apicid);
+#endif
+
+	post_code(0x38);
+
+	/* run _early_setup before soft-reset. */
+	rs780_early_setup();
+
+#if CONFIG_SET_FIDVID == 1
+	msr = rdmsr(0xc0010071);
+	printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
+	post_code(0x39);
+
+	if (!warm_reset_detect(0)) {			// BSP is node 0
+		init_fidvid_bsp(bsp_apicid, sysinfo->nodes);
+	} else {
+		init_fidvid_stage2(bsp_apicid, 0);	// BSP is node 0
+	}
+
+	post_code(0x3A);
+
+	/* show final fid and vid */
+	msr=rdmsr(0xc0010071);
+	printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
+#endif
+
+	rs780_htinit();
+
+	/* Reset for HT, FIDVID, PLL and errata changes to take affect. */
+	if (!warm_reset_detect(0)) {
+		print_info("...WARM RESET...\n\n\n");
+		soft_reset();
+		die("After soft_reset_x - shouldn't see this message!!!\n");
+	}
+
+	post_code(0x3B);
+
+	/* It's the time to set ctrl in sysinfo now; */
+	printk(BIOS_DEBUG, "fill_mem_ctrl()\n");
+	fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
+
+	post_code(0x40);
+
+//	die("Die Before MCT init.");
+
+	printk(BIOS_DEBUG, "raminit_amdmct()\n");
+	raminit_amdmct(sysinfo);
+	post_code(0x41);
+
+/*
+	dump_pci_device_range(PCI_DEV(0, 0x18, 0), 0, 0x200);
+	dump_pci_device_range(PCI_DEV(0, 0x18, 1), 0, 0x200);
+	dump_pci_device_range(PCI_DEV(0, 0x18, 2), 0, 0x200);
+	dump_pci_device_range(PCI_DEV(0, 0x18, 3), 0, 0x200);
+*/
+
+//	ram_check(0x00200000, 0x00200000 + (640 * 1024));
+//	ram_check(0x40200000, 0x40200000 + (640 * 1024));
+
+//	die("After MCT init before CAR disabled.");
+
+	rs780_before_pci_init();
+
+	post_code(0x42);
+	post_cache_as_ram();	// BSP switch stack to ram, copy then execute LB.
+	post_code(0x43);	// Should never see this post code.
+}
+
+/**
+ * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List)
+ * Description:
+ *	This routine is called every time a non-coherent chain is processed.
+ *	BUID assignment may be controlled explicitly on a non-coherent chain. Provide a
+ *	swap list. The first part of the list controls the BUID assignment and the
+ *	second part of the list provides the device to device linking.  Device orientation
+ *	can be detected automatically, or explicitly.  See documentation for more details.
+ *
+ *	Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially
+ *	based on each device's unit count.
+ *
+ * Parameters:
+ *	@param[in]  u8  node    = The node on which this chain is located
+ *	@param[in]  u8  link    = The link on the host for this chain
+ *	@param[out] u8** list   = supply a pointer to a list
+ *	@param[out] BOOL result = true to use a manual list
+ *				  false to initialize the link automatically
+ */
+BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List)
+{
+	static const u8 swaplist[] = {0, 1, 0xFF, 0, 0xFF};
+	/* If the BUID was adjusted in early_ht we need to do the manual override */
+		if ((node == 0) && (link == 0)) {	/* BSP SB link */
+			*List = swaplist;
+			return 1;
+		}
+
+	return 0;
+}




More information about the coreboot mailing list