[coreboot] Patch set updated for coreboot: 08b1466 Add support for A-Open DXPL Plus-U motherboard
Kyösti Mälkki (kyosti.malkki@gmail.com)
gerrit at coreboot.org
Wed Oct 19 18:00:11 CEST 2011
Kyösti Mälkki (kyosti.malkki at gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/303
-gerrit
commit 08b14667047688b52aab01c686c42ea9ac458815
Author: Kyösti Mälkki <kyosti.malkki at gmail.com>
Date: Mon Oct 17 18:08:13 2011 +0300
Add support for A-Open DXPL Plus-U motherboard
This is an old (pre-2005) entry-level server mainboard. The code
is adapted from mainboard/intel/xe7501devkit.
Featured chips:
- Dual socket604
- E7505 northbridge
- 82801DB southbridge (with EHCI debug port)
- 82870p2 PCI-X bridge
- LPC47M102S-MC super-io
- 512kB FWH flash (flashrom does the job well)
What works:
- Dual-Xeon P4/HT boot with microcode update
- RAM: registered ECC DDR266 in dual-channel
- PCI-X slot interrupts with ACPI and I/O apic
- On-board PCI-X GbE and SCSI
- ACPI power-off and wakeup with PME#
Notes :
- Current ACPI is more or less a mess
- Interrupts do not route correctly with PIRQ
- MP-table is not implemented
- Issues with reboots remain (cold and warm)
- Many superio devices are disabled by default
- Audio codec is not investigated
Change-Id: I02d18c83f485a09ada65dde03bcc86e9163f2011
Signed-off-by: Kyösti Mälkki <kyosti.malkki at gmail.com>
---
src/mainboard/Kconfig | 3 +
src/mainboard/aopen/Kconfig | 17 ++
src/mainboard/aopen/dxplplusu/Kconfig | 56 +++++++
src/mainboard/aopen/dxplplusu/Makefile.inc | 1 +
src/mainboard/aopen/dxplplusu/acpi/e7505_pri.asl | 68 ++++++++
src/mainboard/aopen/dxplplusu/acpi/e7505_sec.asl | 51 ++++++
src/mainboard/aopen/dxplplusu/acpi/i82801db.asl | 138 ++++++++++++++++
src/mainboard/aopen/dxplplusu/acpi/p64h2.asl | 72 +++++++++
src/mainboard/aopen/dxplplusu/acpi/power.asl | 73 +++++++++
src/mainboard/aopen/dxplplusu/acpi/scsi.asl | 20 +++
src/mainboard/aopen/dxplplusu/acpi/superio.asl | 181 ++++++++++++++++++++++
src/mainboard/aopen/dxplplusu/acpi_tables.c | 151 ++++++++++++++++++
src/mainboard/aopen/dxplplusu/bus.h | 16 ++
src/mainboard/aopen/dxplplusu/chip.h | 4 +
src/mainboard/aopen/dxplplusu/cmos.layout | 55 +++++++
src/mainboard/aopen/dxplplusu/devicetree.cb | 69 ++++++++
src/mainboard/aopen/dxplplusu/dsdt.asl | 97 ++++++++++++
src/mainboard/aopen/dxplplusu/fadt.c | 166 ++++++++++++++++++++
src/mainboard/aopen/dxplplusu/failover.c | 48 ++++++
src/mainboard/aopen/dxplplusu/ioapic.h | 9 +
src/mainboard/aopen/dxplplusu/irq_tables.c | 61 ++++++++
src/mainboard/aopen/dxplplusu/mainboard.c | 7 +
src/mainboard/aopen/dxplplusu/romstage.c | 80 ++++++++++
23 files changed, 1443 insertions(+), 0 deletions(-)
diff --git a/src/mainboard/Kconfig b/src/mainboard/Kconfig
index 13032a6..549962f 100644
--- a/src/mainboard/Kconfig
+++ b/src/mainboard/Kconfig
@@ -14,6 +14,8 @@ config VENDOR_ADVANTECH
bool "Advantech"
config VENDOR_AMD
bool "AMD"
+config VENDOR_AOPEN
+ bool "AOpen"
config VENDOR_ARIMA
bool "Arima"
config VENDOR_ARTEC_GROUP
@@ -131,6 +133,7 @@ source "src/mainboard/abit/Kconfig"
source "src/mainboard/advansus/Kconfig"
source "src/mainboard/advantech/Kconfig"
source "src/mainboard/amd/Kconfig"
+source "src/mainboard/aopen/Kconfig"
source "src/mainboard/arima/Kconfig"
source "src/mainboard/artecgroup/Kconfig"
source "src/mainboard/asi/Kconfig"
diff --git a/src/mainboard/aopen/Kconfig b/src/mainboard/aopen/Kconfig
new file mode 100644
index 0000000..5b5497c
--- /dev/null
+++ b/src/mainboard/aopen/Kconfig
@@ -0,0 +1,17 @@
+if VENDOR_AOPEN
+
+choice
+ prompt "Mainboard model"
+
+config BOARD_AOPEN_DXPLPLUSU
+ bool "DXPL Plus-U"
+
+endchoice
+
+source "src/mainboard/aopen/dxplplusu/Kconfig"
+
+config MAINBOARD_VENDOR
+ string
+ default "AOpen"
+
+endif # VENDOR_AOPEN
diff --git a/src/mainboard/aopen/dxplplusu/Kconfig b/src/mainboard/aopen/dxplplusu/Kconfig
new file mode 100644
index 0000000..f39771e
--- /dev/null
+++ b/src/mainboard/aopen/dxplplusu/Kconfig
@@ -0,0 +1,56 @@
+if BOARD_AOPEN_DXPLPLUSU
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ select ARCH_X86
+ select CPU_INTEL_SOCKET_MPGA604
+ select NORTHBRIDGE_INTEL_E7505
+ select SOUTHBRIDGE_INTEL_I82870
+ select SOUTHBRIDGE_INTEL_I82801DX
+ select SUPERIO_SMSC_LPC47M10X
+ select ROMCC
+ select HAVE_HARD_RESET
+ select HAVE_PIRQ_TABLE
+# select PIRQ_ROUTE
+ select UDELAY_TSC
+# select HAVE_OPTION_TABLE
+ select HAVE_ACPI_TABLES
+ select BOARD_ROMSIZE_KB_512
+
+config MAINBOARD_DIR
+ string
+ default aopen/dxplplusu
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "DXPL Plus-U"
+
+config IRQ_SLOT_COUNT
+ int
+ default 12
+
+config BOARD_HAS_FADT
+ bool
+ default y
+
+config LOGICAL_CPUS
+ bool
+ default n
+
+config MAX_CPUS
+ int
+ default 4
+
+config MAX_PHYSICAL_CPUS
+ int
+ default 2
+
+config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+ hex
+ default 0x0
+
+config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+ hex
+ default 0x0
+
+endif # BOARD_AOPEN_DXPLPLUSU
diff --git a/src/mainboard/aopen/dxplplusu/Makefile.inc b/src/mainboard/aopen/dxplplusu/Makefile.inc
new file mode 100644
index 0000000..0f285cd
--- /dev/null
+++ b/src/mainboard/aopen/dxplplusu/Makefile.inc
@@ -0,0 +1 @@
+ROMCCFLAGS := -mcpu=p4 -O2
diff --git a/src/mainboard/aopen/dxplplusu/acpi/e7505_pri.asl b/src/mainboard/aopen/dxplplusu/acpi/e7505_pri.asl
new file mode 100644
index 0000000..c429a6c
--- /dev/null
+++ b/src/mainboard/aopen/dxplplusu/acpi/e7505_pri.asl
@@ -0,0 +1,68 @@
+
+
+ Device (MBRS)
+ {
+ Name (_HID, EisaId ("PNP0C01"))
+ Name (_UID, 0x01)
+ Name (MSBF, ResourceTemplate ()
+ {
+ /* System memory */
+ QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxNotFixed, Prefetchable, ReadWrite,
+ 0x0, 0x100000000, 0x400000000, 0x0, 0x0, ,, _Y1C, AddressRangeMemory, TypeStatic)
+
+ /* Top Of Low Memory */
+ Memory32 (ReadOnly, 0x0, 0x0, 0x1, 0x0, _Y1D)
+
+ /* 640kB who wants more? */
+ Memory32Fixed (ReadWrite, 0x0, 0xA0000, )
+
+ /* 64k BIOS bootblock */
+ Memory32Fixed (ReadOnly, 0xF0000, 0x10000,)
+
+ /* Memory hole below 16 MB */
+ Memory32Fixed (ReadOnly, 0x100000, 0xF00000,)
+ /* Memory hole in 15-16 MB */
+ /* Memory32Fixed (ReadOnly, 0x100000, 0xE00000,) */
+
+
+ /* Local APIC */
+ Memory32Fixed (ReadWrite, 0xFEE00000, 0x00001000,)
+ })
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ CreateQWordField (MSBF, \_SB.MBRS._Y1C._MIN, MEML)
+ CreateQWordField (MSBF, \_SB.MBRS._Y1C._MAX, MEMM)
+ CreateQWordField (MSBF, \_SB.MBRS._Y1C._LEN, LELM)
+
+ And (\_SB.PCI0.RLAR, 0x03FF, Local1)
+ Increment (Local1)
+ If (LGreater (Local1, 0x40))
+ {
+ ShiftLeft (Local1, 0x1A, LELM)
+ }
+
+
+ CreateDWordField (MSBF, \_SB.MBRS._Y1D._MIN, MS00)
+ CreateDWordField (MSBF, \_SB.MBRS._Y1D._MAX, MS01)
+ CreateDWordField (MSBF, \_SB.MBRS._Y1D._LEN, MEM2)
+ And (\_SB.PCI0.TOLM, 0xF800, Local1)
+ ShiftRight (Local1, 0x04, Local1)
+ Decrement (Local1)
+ If (LGreater (Local1, 0x10))
+ {
+ Subtract (Local1, 0x0F, Local1)
+ Store (ShiftLeft (Local1, 0x14), MEM2)
+ Store (0x01000000, MS00)
+ Store (MS00, MS01)
+ }
+
+ Return (MSBF)
+ }
+
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0F)
+ }
+ }
+
diff --git a/src/mainboard/aopen/dxplplusu/acpi/e7505_sec.asl b/src/mainboard/aopen/dxplplusu/acpi/e7505_sec.asl
new file mode 100644
index 0000000..2ecdd0f
--- /dev/null
+++ b/src/mainboard/aopen/dxplplusu/acpi/e7505_sec.asl
@@ -0,0 +1,51 @@
+
+ Name (PBRS, ResourceTemplate ()
+ {
+ WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
+ 0x0000, 0x0000, 0x00FF, 0x0000, 0x0100, ,, )
+
+ /* System IO */
+ DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+ 0x0, 0x0, 0xffff, 0x0000, 0x10000, ,,, TypeStatic)
+ IO (Decode16, 0x0CF8, 0x0CF8, 0x08, 0x08, )
+
+ /* Video RAM */
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+ 0x00000000, 0x000A0000, 0x000BFFFF,
+ 0x00000000, 0x00020000, ,,, AddressRangeMemory, TypeStatic)
+
+ /* Video ROM */
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+ 0x00000000, 0x000C0000, 0x000C7FFF,
+ 0x00000000, 0x00008000, ,,, AddressRangeMemory, TypeStatic)
+
+ /* Option ROMs ? */
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+ 0x00000000, 0x000C8000, 0x000DFFFF,
+ 0x00000000, 0x00018000, ,,, AddressRangeMemory, TypeStatic)
+
+ /* Top Of Lowmemory to IOAPIC */
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+ 0x00000000, 0x02000000, 0xFEBFFFFF,
+ 0x00000000, 0xFCC00000, ,, _Y08, AddressRangeMemory, TypeStatic)
+ })
+
+ Method (_CRS, 0, NotSerialized)
+ {
+
+ /* Top Of Lowmemory to IOAPIC */
+ CreateDWordField (PBRS, \_SB.PCI0._Y08._MIN, MEML)
+ CreateDWordField (PBRS, \_SB.PCI0._Y08._LEN, LENM)
+ And (\_SB.PCI0.TOLM, 0xF800, Local1)
+ ShiftRight (Local1, 0x04, Local1)
+ ShiftLeft (Local1, 0x14, MEML)
+ Subtract (0xFEC00000, MEML, LENM)
+
+ Return (PBRS)
+ }
+
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0F)
+ }
+
diff --git a/src/mainboard/aopen/dxplplusu/acpi/i82801db.asl b/src/mainboard/aopen/dxplplusu/acpi/i82801db.asl
new file mode 100644
index 0000000..fdf0101
--- /dev/null
+++ b/src/mainboard/aopen/dxplplusu/acpi/i82801db.asl
@@ -0,0 +1,138 @@
+
+ Device (USB0) {
+ Name (_ADR, 0x001D0000)
+ Name (_PRW, Package () { 0x03, 0x05 })
+
+ OperationRegion (USBS, PCI_Config, 0x00, 0x0100)
+ Field (USBS, ByteAcc, NoLock, Preserve)
+ { Offset (0xC4), URES, 8 }
+ }
+
+ Device (USB1) {
+ Name (_ADR, 0x001D0001)
+ Name (_PRW, Package () { 0x04, 0x05 })
+ OperationRegion (USBS, PCI_Config, 0x00, 0x0100)
+ Field (USBS, ByteAcc, NoLock, Preserve)
+ { Offset (0xC4), URES, 8 }
+ }
+
+ Device (USB2) {
+ Name (_ADR, 0x001D0002)
+ Name (_PRW, Package () { 0x0C, 0x05 })
+ OperationRegion (USBS, PCI_Config, 0x00, 0x0100)
+ Field (USBS, ByteAcc, NoLock, Preserve)
+ { Offset (0xC4), URES, 8 }
+ }
+
+ Device (USB3) {
+ Name (_ADR, 0x001D0007)
+ Name (_PRW, Package () { 0x0D, 0x05 }) /* PME_B0_STS any 0:1d or 0:1f device */
+ OperationRegion (USBS, PCI_Config, 0x00, 0x0100)
+ Field (USBS, ByteAcc, NoLock, Preserve)
+ { Offset (0xC4), URES, 8 }
+ }
+
+ Device(PCI5) {
+ Name (_ADR, 0x001E0000)
+ Name (_PRW, Package () { 0x0B, 0x05 }) /* PME# _STS */
+ Name (_PRT, Package() {
+ Package() { 0x0003ffff, 0, 0, 20 },
+ Package() { 0x0003ffff, 1, 0, 21 },
+ Package() { 0x0003ffff, 2, 0, 22 },
+ Package() { 0x0003ffff, 3, 0, 23 },
+ })
+ }
+
+ Device (ICH0) {
+ Name (_ADR, 0x001F0000)
+
+ OperationRegion (D310, PCI_Config, 0x00, 0xFF)
+ Field (D310, ByteAcc, NoLock, Preserve)
+ {
+ Offset (0x40), PBAR, 16,
+ Offset (0x58), GBAR, 16,
+ }
+
+ OperationRegion (ACPI, SystemIO, 0x0400, 0xC0)
+ Field (ACPI, ByteAcc, NoLock, Preserve)
+ {
+ Offset (0x00), PS1L,8, PS1H,8, PE1L,8, PE1H,8,
+ Offset (0x28), GS0L,8, GS0H,8, GSPL,8, GSPH,8,
+ Offset (0x2C), GE0L,8, GE0H,8, GEPL,8, GEPH,8,
+ Offset (0xB8), GPLV,8
+ }
+
+ Name (MSBF, ResourceTemplate () {
+
+ /* IOAPIC 0 */
+ Memory32Fixed (ReadWrite, 0xFEC00000, 0x00001000,)
+
+ IO (Decode16, 0x0, 0x0, 0x80, 0x0, PMIO)
+ IO (Decode16, 0x0, 0x0, 0x40, 0x0, GPIO)
+
+ /* 8254 legacy irq */
+ IO (Decode16, 0x04D0, 0x04D0, 0x02, 0x02,)
+
+ /* reset generator */
+ IO (Decode16, 0x0092, 0x0092, 0x01, 0x01, )
+ })
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ CreateWordField (MSBF, \_SB_.PCI0.ICH0.PMIO._MIN, IOA1)
+ CreateWordField (MSBF, \_SB_.PCI0.ICH0.PMIO._MAX, IOA2)
+ CreateByteField (MSBF, \_SB_.PCI0.ICH0.PMIO._LEN, IOAL)
+
+ Store (PBAR, Local0)
+ If ( Land(Local0, 0x01) ) {
+ And (Local0, 0xFFFE, Local0)
+ Store (Local0, IOA1)
+ Store (Local0, IOA2)
+ Store (0x80, IOAL)
+ } Else {
+ Store (0x00, IOAL)
+ }
+
+ CreateWordField (MSBF, \_SB_.PCI0.ICH0.GPIO._MIN, IOS1)
+ CreateWordField (MSBF, \_SB_.PCI0.ICH0.GPIO._MAX, IOS2)
+ CreateByteField (MSBF, \_SB_.PCI0.ICH0.GPIO._LEN, IOSL)
+
+ Store (GBAR, Local0)
+ If ( Land(Local0, 0x01) ) {
+ And (Local0, 0xFFFE, Local0)
+ Store (Local0, IOS1)
+ Store (Local0, IOS2)
+ Store (0x40, IOSL)
+ } Else {
+ Store (0x00, IOSL)
+ }
+ Return (MSBF)
+ }
+
+
+
+ Device (FWH) {
+ Name (_HID, EisaId ("PNP0C02"))
+ Name (_UID, 0x01)
+
+ Name (MSBG, ResourceTemplate () {
+ Memory32Fixed (ReadOnly, 0xFFF00000, 0x00080000,)
+ Memory32Fixed (ReadOnly, 0xFFF80000, 0x00080000,)
+ })
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ Return (MSBG)
+ }
+ }
+
+ Device (SMSC) {
+ Name (_HID, EisaId ("PNP0C02"))
+ Name (_UID, 0x02)
+ #include "acpi/superio.asl"
+ }
+
+ }
+
+
+
diff --git a/src/mainboard/aopen/dxplplusu/acpi/p64h2.asl b/src/mainboard/aopen/dxplplusu/acpi/p64h2.asl
new file mode 100644
index 0000000..914996d
--- /dev/null
+++ b/src/mainboard/aopen/dxplplusu/acpi/p64h2.asl
@@ -0,0 +1,72 @@
+
+
+ /* bus 03 */
+
+ Device(PBIO) {
+ Name (_HID, "ACPI000A")
+ Name (_ADR, 0x001c0000)
+ }
+
+ Device(P64B) {
+ Name (_ADR, 0x001d0000)
+
+ Name (_PRT, Package() {
+ Package() { 0x0002ffff, 0, 0, 24 }, /* eth0 */
+ Package() { 0x0002ffff, 1, 0, 25 }, /* eth1 */
+ Package() { 0x0002ffff, 2, 0, 26 },
+ Package() { 0x0002ffff, 3, 0, 27 },
+ Package() { 0x0003ffff, 0, 0, 28 }, /* eth2 */
+ Package() { 0x0003ffff, 1, 0, 29 }, /* eth3 */
+ Package() { 0x0003ffff, 2, 0, 30 },
+ Package() { 0x0003ffff, 3, 0, 31 },
+ Package() { 0x0004ffff, 0, 0, 32 }, /* eth4 */
+ })
+
+ Name (_PRW, Package () { 0x0B, 0x05 }) /* PME# _STS */
+ OperationRegion (PBPC, PCI_Config, 0x00, 0xFF)
+ Field (PBPC, ByteAcc, NoLock, Preserve)
+ { Offset (0x3E), BCRL, 8, BCRH, 8 }
+
+
+ Device (ETH0) {
+ Name (_ADR, 0x00040000)
+ Name (_PRW, Package () { 0x0B, 0x05 }) /* PME# _STS */
+ }
+ }
+
+
+ /* bus 04 */
+
+ Device(PAIO) {
+ Name (_HID, "ACPI000A")
+ Name (_ADR, 0x001e0000)
+ }
+
+ Device(P64A) {
+ Name (_ADR, 0x001f0000)
+ Name (_PRT, Package() {
+ Package() { 0x0002ffff, 0, 0, 48 }, /* eth5 */
+ Package() { 0x0002ffff, 1, 0, 49 }, /* eth6 */
+ Package() { 0x0002ffff, 2, 0, 50 },
+ Package() { 0x0002ffff, 3, 0, 51 },
+
+ Package() { 0x0003ffff, 0, 0, 52 },
+ Package() { 0x0003ffff, 1, 0, 53 },
+ Package() { 0x0003ffff, 2, 0, 54 }, /* ? */
+ Package() { 0x0003ffff, 3, 0, 55 }, /* ? */
+
+ Package() { 0x0004ffff, 0, 0, 54 }, /* not 56 ?? */
+ Package() { 0x0004ffff, 1, 0, 55 }, /* not 57 ?? */
+ })
+
+
+ Name (_PRW, Package () { 0x0B, 0x05 }) /* PME# _STS */
+ OperationRegion (PBPC, PCI_Config, 0x00, 0xFF)
+ Field (PBPC, ByteAcc, NoLock, Preserve)
+ { Offset (0x3E), BCRL, 8, BCRH, 8 }
+
+ #include "acpi/scsi.asl"
+
+ }
+
+
diff --git a/src/mainboard/aopen/dxplplusu/acpi/power.asl b/src/mainboard/aopen/dxplplusu/acpi/power.asl
new file mode 100644
index 0000000..cbe38c2
--- /dev/null
+++ b/src/mainboard/aopen/dxplplusu/acpi/power.asl
@@ -0,0 +1,73 @@
+
+
+ Name (\_S0, Package () { 0x00, 0x00, 0x00, 0x00 })
+ Name (\_S1, Package () { 0x01, 0x01, 0x00, 0x00 })
+ Name (\_S3, Package () { 0x05, 0x05, 0x00, 0x00 })
+ Name (\_S4, Package () { 0x06, 0x06, 0x00, 0x00 })
+ Name (\_S5, Package () { 0x07, 0x07, 0x00, 0x00 })
+
+
+ Scope (\_GPE)
+ {
+ Method (_L03, 0, NotSerialized)
+ {
+ Notify (\_SB.PCI0.USB0, 0x02)
+ }
+ Method (_L04, 0, NotSerialized)
+ {
+ Notify (\_SB.PCI0.USB1, 0x02)
+ }
+
+ /* WOL header */
+ Method (_L08, 0, NotSerialized)
+ {
+ Notify (\_SB.PCI0.PCI5, 0x02)
+ Notify (\_SB.SLBT, 0x02)
+ }
+
+ /* PME# */
+ Method (_L0B, 0, NotSerialized)
+ {
+#if 1
+ Notify (\_SB.LID0, 0x02)
+#else
+ Notify (\_SB.PCI0.HLIB.P64B.ETH0, 0x02)
+ Notify (\_SB.PCI0.HLIB.P64B, 0x02)
+ Notify (\_SB.PCI0.HLIB.P64A, 0x02)
+#endif
+ }
+ Method (_L0C, 0, NotSerialized)
+ {
+ Notify (\_SB.PCI0.USB2, 0x02)
+ }
+ /* PME_B0_STS# */
+ Method (_L0D, 0, NotSerialized)
+ {
+ Notify (\_SB.PCI0.USB3, 0x02)
+ }
+
+ }
+
+ /* clear power buttons */
+ Method (\_INI, 0, NotSerialized)
+ {
+ Or (\_SB.PCI0.ICH0.PS1H, 0x09, \_SB.PCI0.ICH0.PS1H)
+ Or (\_SB.PCI0.ICH0.PE1H, 0x01, \_SB.PCI0.ICH0.PE1H)
+ }
+
+ /* Prepare To Sleep */
+ Method (\_PTS, 1, NotSerialized)
+ {
+ Or (\_SB.PCI0.ICH0.GS0H, 0x19, \_SB.PCI0.ICH0.GS0H)
+ Or (\_SB.PCI0.ICH0.GS0L, 0x11, \_SB.PCI0.ICH0.GS0L)
+ }
+
+ /* System Wake */
+ Method (\_WAK, 1, NotSerialized)
+ {
+ Or (\_SB.PCI0.ICH0.GS0H, 0x19, \_SB.PCI0.ICH0.GS0H)
+ Or (\_SB.PCI0.ICH0.GS0L, 0x11, \_SB.PCI0.ICH0.GS0L)
+ Return ( Package() { 0x0, 0x0 } )
+ }
+
+
diff --git a/src/mainboard/aopen/dxplplusu/acpi/scsi.asl b/src/mainboard/aopen/dxplplusu/acpi/scsi.asl
new file mode 100644
index 0000000..528fe49
--- /dev/null
+++ b/src/mainboard/aopen/dxplplusu/acpi/scsi.asl
@@ -0,0 +1,20 @@
+ Device (SCS0) {
+ Name (_ADR, 0x00040000)
+ OperationRegion (SCSC, PCI_Config, 0x00, 0x0100)
+ Field (SCSC, ByteAcc, NoLock, Preserve) {
+ Offset (0x2C), SID, 32,
+ Offset (0xE0), PMC, 8,
+ Offset (0xFF), IDW, 8
+ }
+ }
+
+ Device (SCS1) {
+ Name (_ADR, 0x00040001)
+ OperationRegion (SCSC, PCI_Config, 0x00, 0x0100)
+ Field (SCSC, ByteAcc, NoLock, Preserve) {
+ Offset (0x2C), SID, 32,
+ Offset (0xE0), PMC, 8,
+ Offset (0xFF), IDW, 8
+ }
+ }
+
diff --git a/src/mainboard/aopen/dxplplusu/acpi/superio.asl b/src/mainboard/aopen/dxplplusu/acpi/superio.asl
new file mode 100644
index 0000000..4b3d4bd
--- /dev/null
+++ b/src/mainboard/aopen/dxplplusu/acpi/superio.asl
@@ -0,0 +1,181 @@
+
+ Name (MSBF, ResourceTemplate () {
+ IO (Decode16,
+ 0x0000, // Range Minimum
+ 0x0000, // Range Maximum
+ 0x01, // Alignment
+ 0x80, // Length
+ _Y1B)
+ })
+
+ OperationRegion (LPC0, SystemIO, 0x0E00, 0x60)
+ Field (LPC0, ByteAcc, NoLock, Preserve)
+ {
+ PME0, 8,
+ Offset (0x02), PME2, 8,
+ Offset (0x04), PME4, 8,
+ Offset (0x0A), PMEA, 8,
+ Offset (0x23),
+ GC10,8,GC11,8,GC12,8,GC13,8,GC14,8,GC15,8,GC16,8,GC17,8,
+ GC20,8,GC21,8,GC22,8,GC23,8,GC24,8,GC25,8,GC26,8,GC27,8,
+ GC30,8,GC31,8,GC32,8,GC33,8,GC34,8,GC35,8,GC36,8,GC37,8,
+ GC40,8,GC41,8,GC42,8,GC43,8,
+ Offset (0x3F),
+ GC50,8,GC51,8,GC52,8,GC53,8,GC54,8,GC55,8,GC56,8,GC57,8,
+ GC60,8,GC61,8,
+ Offset (0x4B), GP_1, 8, GP_2, 8, GP_3, 8, GP_4, 8, GP_5, 8, GP_6, 8,
+ Offset (0x56), FAN1, 8,
+ Offset (0x5D), LED1, 8, LED2, 8
+ }
+
+ OperationRegion (SMC1, SystemIO, 0x2E, 0x02)
+ Field (SMC1, ByteAcc, NoLock, Preserve)
+ {
+ INDX, 8,
+ DATA, 8
+ }
+
+ IndexField (INDX, DATA, ByteAcc, NoLock, Preserve)
+ {
+ Offset (0x07),
+ LDN, 8,
+ Offset (0x22),
+ PWRC, 8,
+ Offset (0x30),
+ ACTR, 8,
+ Offset (0x60),
+ IOAH, 8,
+ IOAL, 8,
+ IOBH, 8,
+ IOBL, 8,
+ Offset (0x70),
+ INTR, 8,
+ Offset (0x72),
+ INT1, 8,
+ Offset (0x74),
+ DMCH, 8,
+ Offset (0xB2),
+ SPS1, 8,
+ SPS2, 8,
+ Offset (0xB8),
+ D2TS, 8,
+ Offset (0xF0),
+ OPT1, 8,
+ OPT2, 8,
+ OPT3, 8,
+ Offset (0xF4),
+ WDTC, 8,
+ Offset (0xF6),
+ GP01, 8,
+ GP02, 8,
+ GP04, 8
+ }
+
+ Method (ECFG, 0, NotSerialized)
+ {
+ Store (0x55, INDX)
+ }
+
+ Method (XCFG, 0, NotSerialized)
+ {
+ Store (0xAA, INDX)
+ }
+
+ Method (_CRS, 0, NotSerialized)
+ {
+
+ CreateWordField (MSBF, \_SB.PCI0.ICH0.SMSC._Y1B._MIN, IOM1)
+ CreateWordField (MSBF, \_SB.PCI0.ICH0.SMSC._Y1B._MAX, IOM2)
+ CreateByteField (MSBF, \_SB.PCI0.ICH0.SMSC._Y1B._LEN, IOML)
+ ECFG ()
+ Store (0x0A, \_SB.PCI0.ICH0.SMSC.LDN)
+ Store (0x00, IOM1)
+ Store (0x00, IOM2)
+ Or (\_SB.PCI0.ICH0.SMSC.IOAH, IOM1, IOM1)
+ ShiftLeft (IOM1, 0x08, IOM1)
+ Or (\_SB.PCI0.ICH0.SMSC.IOAL, IOM1, IOM1)
+ Store (IOM1, IOM2)
+ If (LNotEqual (IOM1, 0x00))
+ {
+ Store (0x80, IOML)
+ }
+ XCFG ()
+
+ Return (MSBF)
+ }
+
+
+ Method (_INI, 0, NotSerialized) {
+
+ Store (0x00, GC10)
+ Store (0x81, GC11)
+ Store (0x00, GC17)
+ Store (0x0c, GC21)
+ Store (0x00, GC22)
+ Store (0x04, GC27)
+ Store (0x04, GC30)
+ Store (0x01, GC31)
+ Store (0x01, GC32)
+ Store (0x01, GC33)
+ Store (0x01, GC34) /* GPI pwd */
+ Store (0x01, GC35) /* GPI scsi */
+#if 1
+ Store (0x01, GC42) /* GPI */
+#else
+ Store (0x84, GC42) /* nIO_PME */
+#endif
+ Store (0x86, GC60) /* led 1 */
+ Store (0x81, GC61) /* led 2 ?? */
+
+ Store (GP_1, Local0)
+ And( Local0, 0x7C, Local0)
+ Or ( Local0, 0x81, Local0)
+ Store (Local0, GP_1)
+
+ Store (GP_2, Local0)
+ And( Local0, 0xFE, Local0)
+ Or ( Local0, 0x00, Local0)
+ Store (Local0, GP_2)
+
+ Store (GP_3, Local0)
+ And( Local0, 0x7F, Local0)
+ Or ( Local0, 0x80, Local0)
+ Store (Local0, GP_3)
+
+ Store (GP_4, Local0)
+ And( Local0, 0x7F, Local0)
+ Or ( Local0, 0x00, Local0)
+ Store (Local0, GP_4)
+
+ /* Power Led */
+ Store (LED1, Local0)
+ And( Local0, 0xfc, Local0)
+ Or ( Local0, 0x01, Local0)
+ Store (Local0, LED1)
+
+ }
+
+ Method (MLED, 1, NotSerialized)
+ {
+ If (LEqual (Arg0, 0x00))
+ {
+ Store (0x00, LED1)
+ }
+
+ If (LOr (LEqual (Arg0, 0x01), LEqual (Arg0, 0x02)))
+ {
+ Store (0x01, LED1)
+ }
+
+ If (LEqual (Arg0, 0x03))
+ {
+ Store (0x02, LED1)
+ }
+
+ If (LOr (LEqual (Arg0, 0x04), LEqual (Arg0, 0x05)))
+ {
+ Store (0x03, LED1)
+ }
+ }
+
+
diff --git a/src/mainboard/aopen/dxplplusu/acpi_tables.c b/src/mainboard/aopen/dxplplusu/acpi_tables.c
new file mode 100644
index 0000000..7ef0bba
--- /dev/null
+++ b/src/mainboard/aopen/dxplplusu/acpi_tables.c
@@ -0,0 +1,151 @@
+/*
+ * Ported to Intel XE7501DEVKIT from Agami Aruma
+ * written by Stefan Reinauer <stepan at openbios.org>
+ * (C) 2005 Stefan Reinauer
+ * (C) 2005 Digital Design Corporation
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <assert.h>
+#include "bus.h"
+#include "ioapic.h"
+
+
+extern unsigned char AmlCode[];
+
+unsigned long acpi_fill_mcfg(unsigned long current)
+{
+ /* Just a dummy */
+ return current;
+}
+
+unsigned long acpi_fill_slit(unsigned long current)
+{
+ // Not implemented
+ return current;
+}
+
+unsigned long acpi_fill_srat(unsigned long current)
+{
+ // Not implemented
+ return current;
+}
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ unsigned int irq_start = 0;
+ device_t dev = 0;
+ struct resource* res = NULL;
+
+
+ // SJM: Hard-code CPU LAPIC entries for now
+ current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 0, 0);
+ current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 1, 6);
+ current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 2, 1);
+ current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 3, 7);
+
+ // Southbridge IOAPIC
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_ICH4, 0xfec00000, irq_start);
+ irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
+
+ // P64H2 Bus B IOAPIC
+ dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(28, 0));
+ if (!dev)
+ BUG(); // Config.lb error?
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_BUS_B, res->base, irq_start);
+ irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
+
+ // P64H2 Bus A IOAPIC
+ dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(30, 0));
+ if (!dev)
+ BUG(); // Config.lb error?
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_BUS_A, res->base, irq_start);
+ irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
+
+
+ // Map ISA IRQ 0 to IRQ 2
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)current, 1, 0, 2, 0);
+
+ // IRQ9 differs from ISA standard - ours is active high, level-triggered
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)current, 0, 9, 9, 0xD);
+
+ return current;
+}
+
+#define ALIGN_CURRENT current = ((current + 0x0f) & -0x10)
+unsigned long write_acpi_tables(unsigned long start)
+{
+ unsigned long current;
+ acpi_rsdp_t *rsdp;
+ acpi_rsdt_t *rsdt;
+ acpi_madt_t *madt;
+ acpi_facs_t *facs;
+ acpi_fadt_t *fadt;
+ acpi_header_t *dsdt;
+
+ current = start;
+
+ /* Align ACPI tables to 16byte */
+ ALIGN_CURRENT;
+
+ printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start);
+
+ /* We need at least an RSDP and an RSDT Table */
+ rsdp = (acpi_rsdp_t *) current;
+ current += sizeof(acpi_rsdp_t);
+ ALIGN_CURRENT;
+ rsdt = (acpi_rsdt_t *) current;
+ current += sizeof(acpi_rsdt_t);
+ ALIGN_CURRENT;
+
+ /* clear all table memory */
+ memset((void *)start, 0, current - start);
+
+ acpi_write_rsdp(rsdp, rsdt, NULL);
+ acpi_write_rsdt(rsdt);
+
+ /*
+ * We explicitly add these tables later on:
+ */
+ printk(BIOS_DEBUG, "ACPI: * MADT\n");
+ madt = (acpi_madt_t *) current;
+ acpi_create_madt(madt);
+ current+=madt->header.length;
+ ALIGN_CURRENT;
+ acpi_add_table(rsdp,madt);
+
+ printk(BIOS_DEBUG, "ACPI: * FACS\n");
+ facs = (acpi_facs_t *) current;
+ current += sizeof(acpi_facs_t);
+ ALIGN_CURRENT;
+ acpi_create_facs(facs);
+
+ printk(BIOS_DEBUG, "ACPI: * DSDT\n");
+ dsdt = (acpi_header_t *)current;
+ memcpy(dsdt,(void *)AmlCode, sizeof(acpi_header_t));
+ current += dsdt->length;
+ ALIGN_CURRENT;
+ memcpy(dsdt,(void *)AmlCode, dsdt->length);
+
+ dsdt->checksum = 0;
+ dsdt->checksum = acpi_checksum((void *)dsdt,dsdt->length);
+ printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length);
+
+ printk(BIOS_DEBUG, "ACPI: * FADT\n");
+ fadt = (acpi_fadt_t *) current;
+ current += sizeof(acpi_fadt_t);
+ ALIGN_CURRENT;
+
+ acpi_create_fadt(fadt,facs,dsdt);
+ acpi_add_table(rsdp,fadt);
+
+ printk(BIOS_INFO, "ACPI: done.\n");
+ return current;
+}
+
diff --git a/src/mainboard/aopen/dxplplusu/bus.h b/src/mainboard/aopen/dxplplusu/bus.h
new file mode 100644
index 0000000..870ab74
--- /dev/null
+++ b/src/mainboard/aopen/dxplplusu/bus.h
@@ -0,0 +1,16 @@
+#ifndef XE7501DEVKIT_BUS_H_INCLUDED
+#define XE7501DEVKIT_BUS_H_INCLUDED
+
+// These were determined by seeing how coreboot enumerates the various
+// PCI (and PCI-like) buses on the board.
+
+#define PCI_BUS_ROOT 0
+#define PCI_BUS_AGP 1 // AGP
+#define PCI_BUS_E7501_HI_B 2 // P64H2#1
+#define PCI_BUS_P64H2_B 3 // P64H2#1 bus B
+#define PCI_BUS_P64H2_A 4 // P64H2#1 bus A
+#define PCI_BUS_ICH4 5 // ICH4
+
+#define SUPERIO_BUS 8 // (arbitrary but unique bus #)
+
+#endif // XE7501DEVKIT_BUS_H_INCLUDED
diff --git a/src/mainboard/aopen/dxplplusu/chip.h b/src/mainboard/aopen/dxplplusu/chip.h
new file mode 100644
index 0000000..06f11d0
--- /dev/null
+++ b/src/mainboard/aopen/dxplplusu/chip.h
@@ -0,0 +1,4 @@
+extern struct chip_operations mainboard_ops;
+
+struct mainboard_config {
+};
diff --git a/src/mainboard/aopen/dxplplusu/cmos.layout b/src/mainboard/aopen/dxplplusu/cmos.layout
new file mode 100644
index 0000000..66b4d86
--- /dev/null
+++ b/src/mainboard/aopen/dxplplusu/cmos.layout
@@ -0,0 +1,55 @@
+# NOTE: This file must be in UNIX format (not DOS) or build_opt_tbl fails:
+# "Error - Name is an invalid identifier in line"
+
+entries
+
+#start-bit length config config-ID name
+0 512 r 0 reserved_memory1 # We know nothing about the factory BIOS
+512 512 r 0 reserved_memory2 # More factory BIOS
+
+# Work in progress.
+# This is where we would put the LB RTC_BOOT_BYTE options once the code
+# supports finding them there.
+#1024 1 e 4 boot_option
+#1025 1 e 4 last_boot
+#1026 1 e 1 ECC_memory
+#1028 4 r 0 reboot_bits
+
+# Options used by XE7501DevKit
+#1032 3 e 5 baud_rate
+#1035 1 e 2 hyper_threading
+#1036 1 e 1 power_on_after_fail
+#1037 1 e 1 nmi
+
+#1040 4 e 6 debug_level
+
+#1048 16 h 0 check_sum
+
+
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+
+checksums
+
+# Checksum FROM bit-location TO bit-location STORE AT bit-location
+checksum 1024 1047 1048
diff --git a/src/mainboard/aopen/dxplplusu/devicetree.cb b/src/mainboard/aopen/dxplplusu/devicetree.cb
new file mode 100644
index 0000000..b3afe69
--- /dev/null
+++ b/src/mainboard/aopen/dxplplusu/devicetree.cb
@@ -0,0 +1,69 @@
+chip northbridge/intel/e7505
+ device pci_domain 0 on
+ device pci 0.0 on end # Chipset host controller
+ device pci 0.1 on end # Host RASUM controller
+ device pci 2.0 on # Hub interface B
+ chip southbridge/intel/i82870 # P64H2
+ device pci 1c.0 on end # IOAPIC - bus B
+ device pci 1d.0 on end # Hub to PCI-B bridge
+ device pci 1e.0 on end # IOAPIC - bus A
+ device pci 1f.0 on end # Hub to PCI-A bridge
+ end
+ end
+ device pci 4.0 off end # (undocumented)
+ device pci 6.0 off end # (undocumented)
+ chip southbridge/intel/i82801dx
+ device pci 1d.0 on end # USB UHCI
+ device pci 1d.1 on end # USB UHCI
+ device pci 1d.2 on end # USB UHCI
+ device pci 1d.7 on end # USB EHCI
+ device pci 1e.0 on # Hub to PCI bridge
+ device pci 2.0 off end
+ end
+ device pci 1f.0 on # LPC bridge
+ chip superio/smsc/lpc47m10x
+ device pnp 2e.0 off # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.3 off # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.4 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.5 off # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.7 off # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1 # Keyboard interrupt
+ irq 0x72 = 12 # Mouse interrupt
+ end
+ device pnp 2e.a on # ACPI
+ io 0x60 = 0x0e00
+ end
+ end
+ end
+ device pci 1f.1 on end # IDE
+ device pci 1f.3 on end # SMBus
+ device pci 1f.5 on end # AC97 Audio
+ device pci 1f.6 off end # AC97 Modem
+ end # SB
+ end # PCI_DOMAIN
+ device lapic_cluster 0 on
+ chip cpu/intel/socket_mPGA604
+ device lapic 0 on end
+# device lapic 1 on end
+ end
+# chip cpu/intel/socket_mPGA604
+# device lapic 6 on end
+# device lapic 7 on end
+# end
+ end
+end
diff --git a/src/mainboard/aopen/dxplplusu/dsdt.asl b/src/mainboard/aopen/dxplplusu/dsdt.asl
new file mode 100644
index 0000000..1ffde87
--- /dev/null
+++ b/src/mainboard/aopen/dxplplusu/dsdt.asl
@@ -0,0 +1,97 @@
+/* This is a dummy dsdt. Normal ACPI requires a DSDT, but in this case, ACPI
+ is just a workaround for QNX. It would be nice to eventually have a real
+ dsdt here.
+ Note: It will not be hooked up at runtime. It won't even get linked.
+ But we still need this file. */
+
+DefinitionBlock(
+ "dsdt.aml",
+ "DSDT",
+ 0x02, // DSDT revision: ACPI v2.0
+ "COREv2", // OEM id
+ "COREBOOT", // OEM table id
+ 0x20090419 // OEM revision
+)
+{
+ Scope(\_SB) {
+
+ Device(PCI0) {
+ Name (_HID, EISAID("PNP0A03"))
+ Name (_ADR, 0x00)
+ Name (_PRT, Package() {
+ Package() { 0x001dffff, 0, 0, 16 },
+ Package() { 0x001dffff, 1, 0, 19 },
+ Package() { 0x001dffff, 2, 0, 18 },
+ Package() { 0x001dffff, 3, 0, 23 },
+ Package() { 0x001fffff, 0, 0, 18 },
+ Package() { 0x001fffff, 1, 0, 17 },
+ })
+
+ #include "acpi/e7505_sec.asl"
+
+ OperationRegion (I750, PCI_Config, 0x00, 0x0100)
+ Field (I750, ByteAcc, NoLock, Preserve)
+ {
+ Offset (0xC4),
+ TOLM, 16,
+ RBAR, 16,
+ RLAR, 16
+ }
+ }
+ #include "acpi/e7505_pri.asl"
+
+
+ Device (PWBT)
+ {
+ Name (_HID, EisaId ("PNP0C0C"))
+ Name (_PRW, Package () { 0x08, 0x05 })
+ }
+ Device (SLBT)
+ {
+ Name (_HID, EisaId ("PNP0C0E"))
+ Name (_PRW, Package () { 0x0B, 0x05 })
+ }
+ Device (LID0)
+ {
+ Name (_HID, EisaId ("PNP0C0D"))
+ Name (_PRW, Package () { 0x0B, 0x05 })
+ }
+
+ }
+
+ Scope(\_SB.PCI0) {
+
+ Device(PCI1) {
+ Name (_ADR, 0x00010000)
+ Name (_PRT, Package() {
+ Package() { 0x0000ffff, 0, 0, 16 },
+ Package() { 0x0000ffff, 1, 0, 17 },
+ })
+
+ }
+
+ Device(HLIB) {
+ Name (_ADR, 0x00020000)
+ Name (_PRT, Package() {
+ Package() { 0x001dffff, 0, 0, 18 },
+ Package() { 0x001dffff, 1, 0, 18 },
+ Package() { 0x001dffff, 2, 0, 18 },
+ Package() { 0x001dffff, 3, 0, 18 },
+ Package() { 0x001fffff, 0, 0, 18 },
+ Package() { 0x001fffff, 1, 0, 18 },
+ Package() { 0x001fffff, 2, 0, 18 },
+ Package() { 0x001fffff, 3, 0, 18 },
+ })
+ #include "acpi/p64h2.asl"
+ }
+
+ #include "acpi/i82801db.asl"
+
+ }
+
+ #include "acpi/power.asl"
+
+}
+
+
+
diff --git a/src/mainboard/aopen/dxplplusu/fadt.c b/src/mainboard/aopen/dxplplusu/fadt.c
new file mode 100644
index 0000000..1daf8e9
--- /dev/null
+++ b/src/mainboard/aopen/dxplplusu/fadt.c
@@ -0,0 +1,166 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <string.h>
+#include <device/pci.h>
+#include <arch/acpi.h>
+
+/* FIXME: This needs to go into a separate .h file
+ * to be included by the ich7 smi handler, ich7 smi init
+ * code and the mainboard fadt.
+ */
+#define APM_CNT 0x0 /* ACPI mode only */
+#define CST_CONTROL 0x85
+#define PST_CONTROL 0x0
+#define ACPI_DISABLE 0xAA
+#define ACPI_ENABLE 0x55
+#define S4_BIOS 0x77
+#define GNVS_UPDATE 0xea
+
+void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
+{
+ acpi_header_t *header = &(fadt->header);
+ u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), 0x40) & 0xfffe;
+
+ memset((void *) fadt, 0, sizeof(acpi_fadt_t));
+ memcpy(header->signature, "FACP", 4);
+ header->length = sizeof(acpi_fadt_t);
+ header->revision = 3;
+ memcpy(header->oem_id, "CORE ", 6);
+ memcpy(header->oem_table_id, "COREBOOT", 8);
+ memcpy(header->asl_compiler_id, "CORE", 4);
+ header->asl_compiler_revision = 1;
+
+ fadt->firmware_ctrl = (unsigned long) facs;
+ fadt->dsdt = (unsigned long) dsdt;
+ fadt->model = 1;
+ fadt->preferred_pm_profile = 0; /* PM_MOBILE; */
+
+ fadt->sci_int = 0x9;
+ fadt->smi_cmd = APM_CNT;
+ fadt->acpi_enable = ACPI_ENABLE;
+ fadt->acpi_disable = ACPI_DISABLE;
+ fadt->s4bios_req = S4_BIOS;
+ fadt->pstate_cnt = PST_CONTROL;
+
+ fadt->pm1a_evt_blk = pmbase;
+ fadt->pm1b_evt_blk = 0x0;
+ fadt->pm1a_cnt_blk = pmbase + 0x4;
+ fadt->pm1b_cnt_blk = 0x0;
+ fadt->pm2_cnt_blk = 0x0;
+ fadt->pm_tmr_blk = pmbase + 0x8;
+ fadt->gpe0_blk = pmbase + 0x28;
+ fadt->gpe1_blk = 0;
+
+ fadt->pm1_evt_len = 4;
+ fadt->pm1_cnt_len = 2;
+ // XXX: pm2_cnt_len is probably wrong. find out right value (hint: it's != 0)
+ fadt->pm2_cnt_len = 0;
+ fadt->pm_tmr_len = 4;
+ fadt->gpe0_blk_len = 8;
+ fadt->gpe1_blk_len = 0;
+ fadt->gpe1_base = 0;
+ fadt->cst_cnt = 0; /* CST_CONTROL; */
+ fadt->p_lvl2_lat = 1;
+ fadt->p_lvl3_lat = 85;
+ fadt->flush_size = 1024;
+ fadt->flush_stride = 16;
+ fadt->duty_offset = 1;
+ fadt->duty_width = 0;
+ fadt->day_alrm = 0xd;
+ fadt->mon_alrm = 0x00;
+ fadt->century = 0x00;
+ fadt->iapc_boot_arch = 0x03;
+
+ fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED |
+ ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON |
+ ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK;
+
+ fadt->reset_reg.space_id = 0;
+ fadt->reset_reg.bit_width = 0;
+ fadt->reset_reg.bit_offset = 0;
+ fadt->reset_reg.resv = 0;
+ fadt->reset_reg.addrl = 0x0;
+ fadt->reset_reg.addrh = 0x0;
+
+ fadt->reset_value = 0;
+ fadt->x_firmware_ctl_l = (unsigned long)facs;
+ fadt->x_firmware_ctl_h = 0;
+ fadt->x_dsdt_l = (unsigned long)dsdt;
+ fadt->x_dsdt_h = 0;
+
+ fadt->x_pm1a_evt_blk.space_id = 1;
+ fadt->x_pm1a_evt_blk.bit_width = 32;
+ fadt->x_pm1a_evt_blk.bit_offset = 0;
+ fadt->x_pm1a_evt_blk.resv = 0;
+ fadt->x_pm1a_evt_blk.addrl = pmbase;
+ fadt->x_pm1a_evt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_evt_blk.space_id = 1;
+ fadt->x_pm1b_evt_blk.bit_width = 0;
+ fadt->x_pm1b_evt_blk.bit_offset = 0;
+ fadt->x_pm1b_evt_blk.resv = 0;
+ fadt->x_pm1b_evt_blk.addrl = 0x0;
+ fadt->x_pm1b_evt_blk.addrh = 0x0;
+
+ fadt->x_pm1a_cnt_blk.space_id = 1;
+ fadt->x_pm1a_cnt_blk.bit_width = 16;
+ fadt->x_pm1a_cnt_blk.bit_offset = 0;
+ fadt->x_pm1a_cnt_blk.resv = 0;
+ fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4;
+ fadt->x_pm1a_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_cnt_blk.space_id = 1;
+ fadt->x_pm1b_cnt_blk.bit_width = 0;
+ fadt->x_pm1b_cnt_blk.bit_offset = 0;
+ fadt->x_pm1b_cnt_blk.resv = 0;
+ fadt->x_pm1b_cnt_blk.addrl = 0x0;
+ fadt->x_pm1b_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm2_cnt_blk.space_id = 1;
+ fadt->x_pm2_cnt_blk.bit_width = 0;
+ fadt->x_pm2_cnt_blk.bit_offset = 0;
+ fadt->x_pm2_cnt_blk.resv = 0;
+ fadt->x_pm2_cnt_blk.addrl = 0x0;
+ fadt->x_pm2_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm_tmr_blk.space_id = 1;
+ fadt->x_pm_tmr_blk.bit_width = 32;
+ fadt->x_pm_tmr_blk.bit_offset = 0;
+ fadt->x_pm_tmr_blk.resv = 0;
+ fadt->x_pm_tmr_blk.addrl = pmbase + 0x8;
+ fadt->x_pm_tmr_blk.addrh = 0x0;
+
+ fadt->x_gpe0_blk.space_id = 1;
+ fadt->x_gpe0_blk.bit_width = 64;
+ fadt->x_gpe0_blk.bit_offset = 0;
+ fadt->x_gpe0_blk.resv = 0;
+ fadt->x_gpe0_blk.addrl = pmbase + 0x28;
+ fadt->x_gpe0_blk.addrh = 0x0;
+
+ fadt->x_gpe1_blk.space_id = 1;
+ fadt->x_gpe1_blk.bit_width = 0;
+ fadt->x_gpe1_blk.bit_offset = 0;
+ fadt->x_gpe1_blk.resv = 0;
+ fadt->x_gpe1_blk.addrl = 0x0;
+ fadt->x_gpe1_blk.addrh = 0x0;
+
+ header->checksum =
+ acpi_checksum((void *) fadt, header->length);
+}
diff --git a/src/mainboard/aopen/dxplplusu/failover.c b/src/mainboard/aopen/dxplplusu/failover.c
new file mode 100644
index 0000000..cadcc0c
--- /dev/null
+++ b/src/mainboard/aopen/dxplplusu/failover.c
@@ -0,0 +1,48 @@
+#define ASSEMBLY 1
+#define __PRE_RAM__
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include "pc80/mc146818rtc_early.c"
+#include "southbridge/intel/i82801dx/cmos_failover.c"
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/intel/e7505/reset_test.c"
+
+static unsigned long main(unsigned long bist)
+{
+ /* Is this a deliberate reset by the bios */
+ if (bios_reset_detected() && last_boot_normal()) {
+ goto normal_image;
+ }
+ /* This is the primary cpu how should I boot? */
+ else {
+
+ check_cmos_failed();
+
+ if (do_normal_boot()) {
+ goto normal_image;
+ }
+ else {
+ goto fallback_image;
+ }
+ }
+ normal_image:
+ asm volatile ("jmp __normal_image"
+ : /* outputs */
+ : "a" (bist) /* inputs */
+ : /* clobbers */
+ );
+#if 0
+ cpu_reset:
+ asm volatile ("jmp __cpu_reset"
+ : /* outputs */
+ : "a"(bist) /* inputs */
+ : /* clobbers */
+ );
+#endif
+ fallback_image:
+ return bist;
+}
diff --git a/src/mainboard/aopen/dxplplusu/ioapic.h b/src/mainboard/aopen/dxplplusu/ioapic.h
new file mode 100644
index 0000000..2f97f2a
--- /dev/null
+++ b/src/mainboard/aopen/dxplplusu/ioapic.h
@@ -0,0 +1,9 @@
+// IOAPIC addresses determined by coreboot enumeration.
+// Someday add functions to get APIC IDs and versions from the chips themselves.
+
+#define IOAPIC_ICH4 2
+#define IOAPIC_P64H2_BUS_B 3 // IOAPIC 3 at 02:1c.0 MBAR = fe300000 DataAddr = fe300010
+#define IOAPIC_P64H2_BUS_A 4 // IOAPIC 4 at 02:1e.0 MBAR = fe301000 DataAddr = fe301010
+
+#define P64H2_IOAPIC_VERSION 0x20
+#define INTEL_IOAPIC_NUM_INTERRUPTS 24 // Both ICH-4 and P64-H2
diff --git a/src/mainboard/aopen/dxplplusu/irq_tables.c b/src/mainboard/aopen/dxplplusu/irq_tables.c
new file mode 100644
index 0000000..a66a3d6
--- /dev/null
+++ b/src/mainboard/aopen/dxplplusu/irq_tables.c
@@ -0,0 +1,61 @@
+/* Run checkpir to verify any changes to this table...
+ Documentation at : http://www.microsoft.com/whdc/archive/pciirq.mspx
+*/
+
+#include <arch/pirq_routing.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include "bus.h"
+
+#define UNUSED_INTERRUPT {0, 0}
+#define PIRQ_A 0x60
+#define PIRQ_B 0x61
+#define PIRQ_C 0x62
+#define PIRQ_D 0x63
+#define PIRQ_E 0x68
+#define PIRQ_F 0x69
+#define PIRQ_G 0x6A
+#define PIRQ_H 0x6B
+
+const struct irq_routing_table intel_irq_routing_table = {
+ PIRQ_SIGNATURE,
+ PIRQ_VERSION,
+ 32 + 16 * CONFIG_IRQ_SLOT_COUNT, // Size of this struct in bytes
+ 0, // PCI bus number on which the interrupt router resides
+ PCI_DEVFN(31, 0), // PCI device/function number of the interrupt router
+ 0, // PCI-exclusive IRQ bitmap
+ PCI_VENDOR_ID_INTEL, // Vendor ID of compatible PCI interrupt router
+ PCI_DEVICE_ID_INTEL_82801DB_LPC, // Device ID of compatible PCI interrupt router
+ 0, // Additional miniport information
+ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, // Reserved, must be zero
+ 0xB1, // Checksum of the entire structure (causes 8-bit sum == 0)
+ {
+ // NOTE: For 82801, a nonzero link value is a pointer to a PIRQ[n]_ROUT register in PCI configuration space
+ // This was determined from linux-2.6.11/arch/i386/pci/irq.c
+ // bitmap of 0xdcf8 == routable to IRQ3-IRQ7, IRQ10-IRQ12, or IRQ14-IRQ15
+ // ICH-3 doesn't allow SERIRQ or PCI message to generate IRQ0, IRQ2, IRQ8, or IRQ13
+ // Not sure why IRQ9 isn't routable (inherited from Tyan S2735)
+
+ // INTA# INTB# INTC# INTD#
+ // bus, device # {link , bitmap}, {link , bitmap}, {link , bitmap}, {link , bitmap}, slot, rfu
+
+ {PCI_BUS_ROOT, PCI_DEVFN(31, 0), {{PIRQ_C, 0xdcf8}, {PIRQ_B, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // IDE / SMBus
+ {PCI_BUS_ROOT, PCI_DEVFN(29, 0), {{PIRQ_A, 0xdcf8}, {PIRQ_D, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_H, 0xdcf8}}, 0, 0}, // USB 1.1
+
+ {PCI_BUS_P64H2_B, PCI_DEVFN(2, 0) , {{PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}}, 0, 0},
+ {PCI_BUS_P64H2_B, PCI_DEVFN(3, 0) , {{PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}}, 0, 0},
+ {PCI_BUS_P64H2_B, PCI_DEVFN(4, 0) , {{PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}}, 0, 0}, // GbE
+
+ {PCI_BUS_P64H2_A, PCI_DEVFN(2, 0) , {{PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}}, 0, 0},
+ {PCI_BUS_P64H2_A, PCI_DEVFN(3, 0) , {{PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}}, 0, 0},
+ {PCI_BUS_P64H2_A, PCI_DEVFN(4, 0) , {{PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}, {PIRQ_C, 0xdcf8}}, 0, 0}, // SCSI
+
+ {PCI_BUS_ICH4, PCI_DEVFN(3, 0), {{PIRQ_E, 0xdcf8}, {PIRQ_F, 0xdcf8}, {PIRQ_G, 0xdcf8}, {PIRQ_H, 0xdcf8}}, 0, 0}, // 32-bit slot
+
+ }
+};
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+ return copy_pirq_routing_table(addr);
+}
diff --git a/src/mainboard/aopen/dxplplusu/mainboard.c b/src/mainboard/aopen/dxplplusu/mainboard.c
new file mode 100644
index 0000000..2d41509
--- /dev/null
+++ b/src/mainboard/aopen/dxplplusu/mainboard.c
@@ -0,0 +1,7 @@
+#include <device/device.h>
+#include "chip.h"
+
+struct chip_operations mainboard_ops = {
+ CHIP_NAME("AOpen DXPL Plus-U Mainboard")
+};
+
diff --git a/src/mainboard/aopen/dxplplusu/romstage.c b/src/mainboard/aopen/dxplplusu/romstage.c
new file mode 100644
index 0000000..c8bb2dc
--- /dev/null
+++ b/src/mainboard/aopen/dxplplusu/romstage.c
@@ -0,0 +1,80 @@
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include <arch/cpu.h>
+#include <stdlib.h>
+#include <pc80/mc146818rtc.h>
+#include <console/console.h>
+
+#include "southbridge/intel/i82801dx/i82801dx.h"
+#include "southbridge/intel/i82801dx/early_smbus.c"
+#include "southbridge/intel/i82801dx/reset.c"
+#include "northbridge/intel/e7505/raminit.h"
+#include "northbridge/intel/e7505/debug.c"
+#include "superio/smsc/lpc47m10x/early_serial.c"
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "cpu/x86/mtrr/earlymtrr.c"
+#include "cpu/x86/bist.h"
+#include <spd.h>
+
+#define SERIAL_DEV PNP_DEV(0x2e, LPC47M10X2_SP1)
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+ return smbus_read_byte(device, address);
+}
+
+#include "northbridge/intel/e7505/raminit.c"
+#include "northbridge/intel/e7505/reset_test.c"
+#include "lib/generic_sdram.c"
+#include "lib/ramtest.c"
+
+
+// This function MUST appear last (ROMCC limitation)
+static void main(unsigned long bist)
+{
+ static const struct mem_controller memctrl[] = {
+ {
+ .d0 = PCI_DEV(0, 0, 0),
+ .d0f1 = PCI_DEV(0, 0, 1),
+ .channel0 = { 0x50, 0x52, 0, 0 },
+ .channel1 = { 0x51, 0x53, 0, 0 },
+ },
+ };
+
+ if (bist == 0) {
+ // Skip this if there was a built in self test failure
+ early_mtrr_init();
+ enable_lapic();
+ }
+
+ // Get the serial port running and print a welcome banner
+ lpc47m10x_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+// uart_init();
+ console_init();
+
+ // Halt if there was a built in self test failure
+ report_bist_failure(bist);
+
+ // print_pci_devices();
+
+ // If this is a warm boot, some initialization can be skipped
+ if (!bios_reset_detected()) {
+ enable_smbus();
+ // dump_spd_registers(&memctrl[0]);
+ // dump_smbus_registers();
+ // memreset_setup(); No-op for this chipset
+ sdram_initialize(ARRAY_SIZE(memctrl), memctrl);
+
+ ram_check(0x200000,0x800000);
+ }
+
+
+ // NOTE: ROMCC dies with an internal compiler error
+ // if the following line is removed.
+ print_debug("SDRAM is up.\r\n");
+
+}
More information about the coreboot
mailing list