[coreboot] [commit] r6567 - in trunk/src/mainboard: . siemens siemens/sitemp_g1p1 siemens/sitemp_g1p1/acpi
repository service
svn at coreboot.org
Wed May 11 09:47:44 CEST 2011
Author: oxygene
Date: Wed May 11 09:47:43 2011
New Revision: 6567
URL: https://tracker.coreboot.org/trac/coreboot/changeset/6567
Log:
Add Siemens SITEMP-G1 board
The code is loosely based on AMD dbm690t (and copied from there)
and adapted to match the Siemens SITEMP-G1 board.
It boots both Linux and Windows XP (and if it doesn't then complain
with me [Patrick] because in that case I must have messed it up when
integrating the patch)
Signed-off-by: Josef Kellermann <seppk at arcor.de>
Acked-by: Patrick Georgi <patrick at georgi-clan.de>
Added:
trunk/src/mainboard/siemens/
trunk/src/mainboard/siemens/Kconfig
trunk/src/mainboard/siemens/sitemp_g1p1/
- copied from r6565, trunk/src/mainboard/amd/dbm690t/
trunk/src/mainboard/siemens/sitemp_g1p1/Makefile.inc
trunk/src/mainboard/siemens/sitemp_g1p1/acpi/debug.asl
trunk/src/mainboard/siemens/sitemp_g1p1/acpi/event.asl
trunk/src/mainboard/siemens/sitemp_g1p1/acpi/globutil.asl
trunk/src/mainboard/siemens/sitemp_g1p1/acpi/platform.asl
trunk/src/mainboard/siemens/sitemp_g1p1/acpi/statdef.asl
trunk/src/mainboard/siemens/sitemp_g1p1/acpi/thermal.asl
trunk/src/mainboard/siemens/sitemp_g1p1/int15_func.c
trunk/src/mainboard/siemens/sitemp_g1p1/int15_func.h
Modified:
trunk/src/mainboard/Kconfig
trunk/src/mainboard/siemens/sitemp_g1p1/Kconfig
trunk/src/mainboard/siemens/sitemp_g1p1/acpi/ide.asl
trunk/src/mainboard/siemens/sitemp_g1p1/acpi/routing.asl
trunk/src/mainboard/siemens/sitemp_g1p1/acpi/sata.asl
trunk/src/mainboard/siemens/sitemp_g1p1/acpi/usb.asl
trunk/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c
trunk/src/mainboard/siemens/sitemp_g1p1/chip.h
trunk/src/mainboard/siemens/sitemp_g1p1/cmos.layout
trunk/src/mainboard/siemens/sitemp_g1p1/devicetree.cb
trunk/src/mainboard/siemens/sitemp_g1p1/dsdt.asl
trunk/src/mainboard/siemens/sitemp_g1p1/fadt.c
trunk/src/mainboard/siemens/sitemp_g1p1/get_bus_conf.c
trunk/src/mainboard/siemens/sitemp_g1p1/irq_tables.c
trunk/src/mainboard/siemens/sitemp_g1p1/mainboard.c
trunk/src/mainboard/siemens/sitemp_g1p1/mptable.c
trunk/src/mainboard/siemens/sitemp_g1p1/resourcemap.c
trunk/src/mainboard/siemens/sitemp_g1p1/romstage.c
Modified: trunk/src/mainboard/Kconfig
==============================================================================
--- trunk/src/mainboard/Kconfig Wed May 11 09:44:27 2011 (r6566)
+++ trunk/src/mainboard/Kconfig Wed May 11 09:47:43 2011 (r6567)
@@ -92,6 +92,8 @@
bool "RCA"
config VENDOR_RODA
bool "Roda"
+config VENDOR_SIEMENS
+ bool "Siemens"
config VENDOR_SOYO
bool "Soyo"
config VENDOR_SUNW
@@ -163,6 +165,7 @@
source "src/mainboard/pcengines/Kconfig"
source "src/mainboard/rca/Kconfig"
source "src/mainboard/roda/Kconfig"
+source "src/mainboard/siemens/Kconfig"
source "src/mainboard/soyo/Kconfig"
source "src/mainboard/sunw/Kconfig"
source "src/mainboard/supermicro/Kconfig"
Added: trunk/src/mainboard/siemens/Kconfig
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/mainboard/siemens/Kconfig Wed May 11 09:47:43 2011 (r6567)
@@ -0,0 +1,17 @@
+if VENDOR_SIEMENS
+
+choice
+ prompt "Mainboard model"
+
+config BOARD_SIEMENS_SITEMP_G1P1
+ bool "MB SITEMP-G1 (U1P0/U1P1)"
+
+endchoice
+
+source "src/mainboard/siemens/sitemp_g1p1/Kconfig"
+
+config MAINBOARD_VENDOR
+ string
+ default "Siemens"
+
+endif # VENDOR_SIEMENS
Modified: trunk/src/mainboard/siemens/sitemp_g1p1/Kconfig
==============================================================================
--- trunk/src/mainboard/amd/dbm690t/Kconfig Tue May 10 23:53:13 2011 (r6565)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/Kconfig Wed May 11 09:47:43 2011 (r6567)
@@ -1,4 +1,4 @@
-if BOARD_AMD_DBM690T
+if BOARD_SIEMENS_SITEMP_G1P1
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
@@ -22,10 +22,16 @@
select RAMINIT_SYSINFO
select QRANK_DIMM_SUPPORT
select SET_FIDVID
-
+ select GFXUMA
+ select EXT_CONF_SUPPORT
+
config MAINBOARD_DIR
string
- default amd/dbm690t
+ default siemens/sitemp_g1p1
+
+config LINT01_CONVERSION
+ bool
+ default y
config APIC_ID_OFFSET
hex
@@ -33,7 +39,7 @@
config MAINBOARD_PART_NUMBER
string
- default "DBM690T"
+ default "MB SITEMP-G1 (U1P0/U1P1)"
config MAX_CPUS
int
@@ -42,7 +48,7 @@
config MAX_PHYSICAL_CPUS
int
default 1
-
+
config SB_HT_CHAIN_ON_BUS0
int
default 1
@@ -59,4 +65,16 @@
int
default 11
-endif # BOARD_AMD_DBM690T
+config IOMMU
+ bool
+ default n
+
+config HW_SCRUBBER
+ bool
+ default n
+
+config ECC_MEMORY
+ bool
+ default n
+
+endif # BOARD_SIEMENS_SITEMP_G1P1
Added: trunk/src/mainboard/siemens/sitemp_g1p1/Makefile.inc
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/Makefile.inc Wed May 11 09:47:43 2011 (r6567)
@@ -0,0 +1,23 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2007-2008 coresystems GmbH
+## Copyright (C) 2010 Siemens AG, Inc.
+## (Written by Josef Kellermann <joseph.kellermann at heitec.de> for Siemens AG, Inc.)
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+ramstage-y += int15_func.c
+
Added: trunk/src/mainboard/siemens/sitemp_g1p1/acpi/debug.asl
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/acpi/debug.asl Wed May 11 09:47:43 2011 (r6567)
@@ -0,0 +1,198 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+ DefinitionBlock (
+ "DSDT.AML",
+ "DSDT",
+ 0x01,
+ "XXXXXX",
+ "XXXXXXXX",
+ 0x00010001
+ )
+ {
+ #include "debug.asl"
+ }
+*/
+
+/*
+* 0x80: POST_BASE
+* 0x3F8: DEBCOM_BASE
+* X80: POST_REGION
+* P80: PORT80
+*
+* CREG: DEBCOM_REGION
+* CUAR: DEBCOM_UART
+* CDAT: DEBCOM_DATA
+* CDLM: DEBCOM_DLM
+* DLCR: DEBCOM_LCR
+* CMCR: DEBCOM_MCR
+* CLSR: DEBCOM_LSR
+*
+* DEBUG_INIT DINI
+*/
+
+OperationRegion(X80, SystemIO, 0x80, 1)
+ Field(X80, ByteAcc, NoLock, Preserve)
+{
+ P80, 8
+}
+
+OperationRegion(CREG, SystemIO, 0x3F8, 8)
+ Field(CREG, ByteAcc, NoLock, Preserve)
+{
+ CDAT, 8,
+ CDLM, 8,, 8, DLCR, 8, CMCR, 8, CLSR, 8
+}
+
+/*
+* DINI
+* Initialize the COM port to 115,200 8-N-1
+*/
+Method(DINI)
+{
+ store(0x83, DLCR)
+ store(0x01, CDAT) /* 115200 baud (low) */
+ store(0x00, CDLM) /* 115200 baud (high) */
+ store(0x03, DLCR) /* word=8 stop=1 parity=none */
+ store(0x03, CMCR) /* DTR=1 RTS=1 Out2=Off Loop=Off */
+ store(0x00, CDLM) /* turn off interrupts */
+}
+
+/*
+* THRE
+* Wait for COM port transmitter holding register to go empty
+*/
+Method(THRE)
+{
+ and(CLSR, 0x20, local0)
+ while (Lequal(local0, Zero)) {
+ and(CLSR, 0x20, local0)
+ }
+}
+
+/*
+* OUTX
+* Send a single raw character
+*/
+Method(OUTX, 1)
+{
+ THRE()
+ store(Arg0, CDAT)
+}
+
+/*
+* OUTC
+* Send a single character, expanding LF into CR/LF
+*/
+Method(OUTC, 1)
+{
+ if (LEqual(Arg0, 0x0a)) {
+ OUTX(0x0d)
+ }
+ OUTX(Arg0)
+}
+
+/*
+* DBGN
+* Send a single hex nibble
+*/
+Method(DBGN, 1)
+{
+ and(Arg0, 0x0f, Local0)
+ if (LLess(Local0, 10)) {
+ add(Local0, 0x30, Local0)
+ } else {
+ add(Local0, 0x37, Local0)
+ }
+ OUTC(Local0)
+}
+
+/*
+* DBGB
+* Send a hex byte
+*/
+Method(DBGB, 1)
+{
+ ShiftRight(Arg0, 4, Local0)
+ DBGN(Local0)
+ DBGN(Arg0)
+}
+
+/*
+* DBGW
+* Send a hex word
+*/
+Method(DBGW, 1)
+{
+ ShiftRight(Arg0, 8, Local0)
+ DBGB(Local0)
+ DBGB(Arg0)
+}
+
+/*
+* DBGD
+* Send a hex Dword
+*/
+Method(DBGD, 1)
+{
+ ShiftRight(Arg0, 16, Local0)
+ DBGW(Local0)
+ DBGW(Arg0)
+}
+
+/*
+* DBGO
+* Send either a string or an integer
+*/
+Method(DBGO, 1)
+{
+ /* DINI() */
+ if (LEqual(ObjectType(Arg0), 1)) {
+ if (LGreater(Arg0, 0xffff)) {
+ DBGD(Arg0)
+ } else {
+ if (LGreater(Arg0, 0xff)) {
+ DBGW(Arg0)
+ } else {
+ DBGB(Arg0)
+ }
+ }
+ } else {
+ Name(BDBG, Buffer(80) {})
+ store(Arg0, BDBG)
+ store(0, Local1)
+ while (One) {
+ store(GETC(BDBG, Local1), Local0)
+ if (LEqual(Local0, 0)) {
+ return (0)
+ }
+ OUTC(Local0)
+ Increment(Local1)
+ }
+ }
+ return (0)
+}
+
+/* Get a char from a string */
+Method(GETC, 2)
+{
+ CreateByteField(Arg0, Arg1, DBGC)
+ return (DBGC)
+}
Added: trunk/src/mainboard/siemens/sitemp_g1p1/acpi/event.asl
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/acpi/event.asl Wed May 11 09:47:43 2011 (r6567)
@@ -0,0 +1,316 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ * Copyright (C) 2010 Siemens AG, Inc.
+ * (Written by Josef Kellermann <joseph.kellermann at heitec.de> for Siemens AG, Inc.)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* Supported sleep states: */
+Name(\_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */
+Name(\_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */
+Name(\_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */
+Name(\_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */
+Name(\_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */
+Name(\_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */
+
+Name(\_SB.CSPS ,0) /* Current Sleep State (S0, ... , S5) */
+Name(CSMS, 0) /* Current System State */
+
+/* Wake status package */
+Name(WKST,Package(){Zero, Zero})
+
+/*
+* \_PTS - Prepare to Sleep method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2, etc
+*
+* Exit:
+* -none-
+*
+* The _PTS control method is executed at the beginning of the sleep process
+* for S1-S5. The sleeping value is passed to the _PTS control method. This
+* control method may be executed a relatively long time before entering the
+* sleep state and the OS may abort the operation without notification to
+* the ACPI driver. This method cannot modify the configuration or power
+* state of any device in the system.
+*/
+Method(\_PTS, 1) {
+ /* DBGO("\\_PTS\n") */
+ /* DBGO("From S0 to S") */
+ /* DBGO(Arg0) */
+ /* DBGO("\n") */
+
+ /* Don't allow PCIRST# to reset USB */
+ if (LEqual(Arg0,3)){
+ Store(0,URRE)
+ }
+
+ /* Clear sleep SMI status flag and enable sleep SMI trap. */
+ /*Store(One, CSSM)
+ Store(One, SSEN)*/
+
+ /* On older chips, clear PciExpWakeDisEn */
+ /*if (LLessEqual(\_SB.SBRI, 0x13)) {
+ * Store(0,\_SB.PWDE)
+ *}
+ */
+
+ /* Clear wake status structure. */
+ Store(0, Index(WKST,0))
+ Store(0, Index(WKST,1))
+ \_SB.PCI0.SIOS (Arg0)
+} /* End Method(\_PTS) */
+
+/*
+* The following method results in a "not a valid reserved NameSeg"
+* warning so I have commented it out for the duration. It isn't
+* used, so it could be removed.
+*
+*
+* \_GTS OEM Going To Sleep method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2
+*
+* Exit:
+* -none-
+*
+* Method(\_GTS, 1) {
+* DBGO("\\_GTS\n")
+* DBGO("From S0 to S")
+* DBGO(Arg0)
+* DBGO("\n")
+* }
+*/
+
+/*
+* \_BFS OEM Back From Sleep method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2
+*
+* Exit:
+* -none-
+*/
+Method(\_BFS, 1) {
+ /* DBGO("\\_BFS\n") */
+ /* DBGO("From S") */
+ /* DBGO(Arg0) */
+ /* DBGO(" to S0\n") */
+}
+
+/*
+* \_WAK System Wake method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2
+*
+* Exit:
+* Return package of 2 DWords
+* Dword 1 - Status
+* 0x00000000 wake succeeded
+* 0x00000001 Wake was signaled but failed due to lack of power
+* 0x00000002 Wake was signaled but failed due to thermal condition
+* Dword 2 - Power Supply state
+* if non-zero the effective S-state the power supply entered
+*/
+Method(\_WAK, 1) {
+ /* DBGO("\\_WAK\n") */
+ /* DBGO("From S") */
+ /* DBGO(Arg0) */
+ /* DBGO(" to S0\n") */
+
+ /* Re-enable HPET */
+ Store(1,HPDE)
+
+ /* Restore PCIRST# so it resets USB */
+ if (LEqual(Arg0,3)){
+ Store(1,URRE)
+ }
+
+ /* Arbitrarily clear PciExpWakeStatus */
+ Store(PWST, PWST)
+
+ /* if(DeRefOf(Index(WKST,0))) {
+ * Store(0, Index(WKST,1))
+ * } else {
+ * Store(Arg0, Index(WKST,1))
+ * }
+ */
+ \_SB.PCI0.SIOW (Arg0)
+ Return(WKST)
+} /* End Method(\_WAK) */
+
+Scope(\_GPE) { /* Start Scope GPE */
+ /* General event 3 */
+ Method(_L03) {
+ /* DBGO("\\_GPE\\_L00\n") */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* Legacy PM event */
+ Method(_L08) {
+ /* DBGO("\\_GPE\\_L08\n") */
+ }
+
+ /* Temp warning (TWarn) event */
+ Method(_L09) {
+ /* DBGO("\\_GPE\\_L09\n") */
+ Notify (\_TZ.TZ00, 0x80)
+ }
+
+ /* Reserved */
+ /* Method(_L0A) {
+ * DBGO("\\_GPE\\_L0A\n")
+ * }
+ */
+
+ /* USB controller PME# */
+ Method(_L0B) {
+ /* DBGO("\\_GPE\\_L0B\n") */
+ Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* AC97 controller PME# */
+ /* Method(_L0C) {
+ * DBGO("\\_GPE\\_L0C\n")
+ * }
+ */
+
+ /* OtherTherm PME# */
+ /* Method(_L0D) {
+ * DBGO("\\_GPE\\_L0D\n")
+ * }
+ */
+
+ /* GPM9 SCI event - Moved to USB.asl */
+ /* Method(_L0E) {
+ * DBGO("\\_GPE\\_L0E\n")
+ * }
+ */
+
+ /* PCIe HotPlug event */
+ /* Method(_L0F) {
+ * DBGO("\\_GPE\\_L0F\n")
+ * }
+ */
+
+ /* ExtEvent0 SCI event */
+ Method(_L10) {
+ /* DBGO("\\_GPE\\_L10\n") */
+ }
+
+
+ /* ExtEvent1 SCI event */
+ Method(_L11) {
+ /* DBGO("\\_GPE\\_L11\n") */
+ }
+
+ /* PCIe PME# event */
+ /* Method(_L12) {
+ * DBGO("\\_GPE\\_L12\n")
+ * }
+ */
+
+ /* GPM0 SCI event - Moved to USB.asl */
+ /* Method(_L13) {
+ * DBGO("\\_GPE\\_L13\n")
+ * }
+ */
+
+ /* GPM1 SCI event - Moved to USB.asl */
+ /* Method(_L14) {
+ * DBGO("\\_GPE\\_L14\n")
+ * }
+ */
+
+ /* GPM2 SCI event - Moved to USB.asl */
+ /* Method(_L15) {
+ * DBGO("\\_GPE\\_L15\n")
+ * }
+ */
+
+ /* GPM3 SCI event - Moved to USB.asl */
+ /* Method(_L16) {
+ * DBGO("\\_GPE\\_L16\n")
+ * }
+ */
+
+ /* GPM8 SCI event - Moved to USB.asl */
+ /* Method(_L17) {
+ * DBGO("\\_GPE\\_L17\n")
+ * }
+ */
+
+ /* GPIO0 or GEvent8 event */
+ Method(_L18) {
+ /* DBGO("\\_GPE\\_L18\n") */
+ Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* GPM4 SCI event - Moved to USB.asl */
+ /* Method(_L19) {
+ * DBGO("\\_GPE\\_L19\n")
+ * }
+ */
+
+ /* GPM5 SCI event - Moved to USB.asl */
+ /* Method(_L1A) {
+ * DBGO("\\_GPE\\_L1A\n")
+ * }
+ */
+
+ /* Azalia SCI event */
+ Method(_L1B) {
+ /* DBGO("\\_GPE\\_L1B\n") */
+ Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* GPM6 SCI event - Reassigned to _L06 */
+ /* Method(_L1C) {
+ * DBGO("\\_GPE\\_L1C\n")
+ * }
+ */
+
+ /* GPM7 SCI event - Reassigned to _L07 */
+ /* Method(_L1D) {
+ * DBGO("\\_GPE\\_L1D\n")
+ * }
+ */
+
+ /* GPIO2 or GPIO66 SCI event */
+ /* Method(_L1E) {
+ * DBGO("\\_GPE\\_L1E\n")
+ * }
+ */
+
+ /* SATA SCI event */
+ /* SATA Hot Plug Support -> acpi/sata.asl */
+} /* End Scope GPE */
Added: trunk/src/mainboard/siemens/sitemp_g1p1/acpi/globutil.asl
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/acpi/globutil.asl Wed May 11 09:47:43 2011 (r6567)
@@ -0,0 +1,218 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ * Copyright (C) 2010 Siemens AG, Inc.
+ * (Written by Josef Kellermann <joseph.kellermann at heitec.de> for Siemens AG, Inc.)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+Scope(\_SB) {
+ #include "globutil.asl"
+}
+*/
+
+/* string compare functions */
+Method(MIN, 2)
+{
+ if (LLess(Arg0, Arg1)) {
+ Return(Arg0)
+ } else {
+ Return(Arg1)
+ }
+}
+
+Method(SLEN, 1)
+{
+ Store(Arg0, Local0)
+ Return(Sizeof(Local0))
+}
+
+Method(S2BF, 1)
+{
+ Add(SLEN(Arg0), One, Local0)
+ Name(BUFF, Buffer(Local0) {})
+ Store(Arg0, BUFF)
+ Return(BUFF)
+}
+
+/* Strong string compare. Checks both length and content */
+Method(SCMP, 2)
+{
+ Store(S2BF(Arg0), Local0)
+ Store(S2BF(Arg1), Local1)
+ Store(Zero, Local4)
+ Store(SLEN(Arg0), Local5)
+ Store(SLEN(Arg1), Local6)
+ Store(MIN(Local5, Local6), Local7)
+
+ While(LLess(Local4, Local7)) {
+ Store(Derefof(Index(Local0, Local4)), Local2)
+ Store(Derefof(Index(Local1, Local4)), Local3)
+ if (LGreater(Local2, Local3)) {
+ Return(One)
+ } else {
+ if (LLess(Local2, Local3)) {
+ Return(Ones)
+ }
+ }
+ Increment(Local4)
+ }
+ if (LLess(Local4, Local5)) {
+ Return(One)
+ } else {
+ if (LLess(Local4, Local6)) {
+ Return(Ones)
+ } else {
+ Return(Zero)
+ }
+ }
+}
+
+/* Weak string compare. Checks to find Arg1 at beginning of Arg0.
+* Fails if length(Arg0) < length(Arg1). Returns 0 on Fail, 1 on
+* Pass.
+*/
+Method(WCMP, 2)
+{
+ Store(S2BF(Arg0), Local0)
+ Store(S2BF(Arg1), Local1)
+ if (LLess(SLEN(Arg0), SLEN(Arg1))) {
+ Return(0)
+ }
+ Store(Zero, Local2)
+ Store(SLEN(Arg1), Local3)
+
+ While(LLess(Local2, Local3)) {
+ if (LNotEqual(Derefof(Index(Local0, Local2)),
+ Derefof(Index(Local1, Local2)))) {
+ Return(0)
+ }
+ Increment(Local2)
+ }
+ Return(One)
+}
+
+/* ARG0 = IRQ Number(0-15)
+* Returns Bit Map
+*/
+Method(I2BM, 1)
+{
+ Store(0, Local0)
+ if (LNotEqual(ARG0, 0)) {
+ Store(1, Local1)
+ ShiftLeft(Local1, ARG0, Local0)
+ }
+ Return(Local0)
+}
+Method (SEQL, 2, Serialized)
+{
+ Store (SizeOf (Arg0), Local0)
+ Store (SizeOf (Arg1), Local1)
+ If (LNot (LEqual (Local0, Local1))) { Return (Zero) }
+
+ Name (BUF0, Buffer (Local0) {})
+ Store (Arg0, BUF0)
+ Name (BUF1, Buffer (Local0) {})
+ Store (Arg1, BUF1)
+ Store (Zero, Local2)
+ While (LLess (Local2, Local0))
+ {
+ Store (DerefOf (Index (BUF0, Local2)), Local3)
+ Store (DerefOf (Index (BUF1, Local2)), Local4)
+ If (LNot (LEqual (Local3, Local4))) { Return (Zero) }
+
+ Increment (Local2)
+ }
+
+ Return (One)
+}
+
+/* GetMemoryResources(Node, Link) */
+Method (GMEM, 2, NotSerialized)
+{
+ Name (BUF0, ResourceTemplate ()
+ {
+ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite,
+ 0x00000000, // Address Space Granularity
+ 0x00000000, // Address Range Minimum
+ 0x00000000, // Address Range Maximum
+ 0x00000000, // Address Translation Offset
+ 0x00000001,,,
+ , AddressRangeMemory, TypeStatic)
+ })
+ CreateDWordField (BUF0, 0x0A, MMIN)
+ CreateDWordField (BUF0, 0x0E, MMAX)
+ CreateDWordField (BUF0, 0x16, MLEN)
+ Store (0x00, Local0)
+ Store (0x00, Local4)
+ Store (0x00, Local3)
+ While (LLess (Local0, 0x10))
+ {
+ /* Get value of the first register */
+ Store (DerefOf (Index (\_SB.PCI0.MMIO, Local0)), Local1)
+ Increment (Local0)
+ Store (DerefOf (Index (\_SB.PCI0.MMIO, Local0)), Local2)
+ If (LEqual (And (Local1, 0x03), 0x03)) /* Pair enabled? */
+ {
+ If (LEqual (Arg0, And (Local2, 0x07))) /* Node matches? */
+ {
+ /* If Link Matches (or we got passed 0xFF) */
+ If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local2, 0x30), 0x04))))
+ {
+ /* Extract the Base and Limit values */
+ Store (ShiftLeft (And (Local1, 0xFFFFFF00), 0x08), MMIN)
+ Store (ShiftLeft (And (Local2, 0xFFFFFF00), 0x08), MMAX)
+ Or (MMAX, 0xFFFF, MMAX)
+ Subtract (MMAX, MMIN, MLEN)
+ Increment (MLEN)
+
+ If (Local4) /* I've already done this once */
+ {
+ Concatenate (RTAG (BUF0), Local3, Local5)
+ Store (Local5, Local3)
+ }
+ Else
+ {
+ Store (RTAG (BUF0), Local3)
+ }
+
+ Increment (Local4)
+ }
+ }
+ }
+
+ Increment (Local0)
+ }
+
+ If (LNot (Local4)) /* No resources for this node and link. */
+ {
+ Store (RTAG (BUF0), Local3)
+ }
+
+ Return (Local3)
+}
+
+Method (RTAG, 1, NotSerialized)
+{
+ Store (Arg0, Local0)
+ Store (SizeOf (Local0), Local1)
+ Subtract (Local1, 0x02, Local1)
+ Multiply (Local1, 0x08, Local1)
+ CreateField (Local0, 0x00, Local1, RETB)
+ Store (RETB, Local2)
+ Return (Local2)
+}
Modified: trunk/src/mainboard/siemens/sitemp_g1p1/acpi/ide.asl
==============================================================================
--- trunk/src/mainboard/amd/dbm690t/acpi/ide.asl Tue May 10 23:53:13 2011 (r6565)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/acpi/ide.asl Wed May 11 09:47:43 2011 (r6567)
@@ -50,18 +50,23 @@
0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */
})
-OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */
- Field(ICRG, AnyAcc, NoLock, Preserve)
+OperationRegion(IDEC, PCI_Config, 0x40, 0x20) /* ide control registers */
+ Field(IDEC, AnyAcc, NoLock, Preserve)
{
- PPTS, 8, /* Primary PIO Slave Timing */
- PPTM, 8, /* Primary PIO Master Timing */
- OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */
- PMTM, 8, /* Primary MWDMA Master Timing */
- OFFSET(0x08), PPCR, 8, /* Primary PIO Control */
- OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */
+ PPTS, 8, /* 0x40: 0:7 Primary PIO Slave Timing */
+ PPTM, 8, /* 0x40: 8:15 Primary PIO Master Timing */
+ OFFSET(0x04),
+ PMTS, 8, /* 0x44: 0:7 Primary MWDMA Slave Timing */
+ PMTM, 8, /* 0x44: 7:15 Primary MWDMA Master Timing */
+ OFFSET(0x08),
+ PPCR, 8, /* Primary PIO Control */
+ OFFSET(0x0A),
+ PPMM, 4, /* Primary PIO master Mode */
PPSM, 4, /* Primary PIO slave Mode */
- OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */
- OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */
+ OFFSET(0x14),
+ PDCR, 2, /* Primary UDMA Control */
+ OFFSET(0x16),
+ PDMM, 4, /* Primary UltraDMA Mode */
PDSM, 4, /* Primary UltraDMA Mode */
}
@@ -74,9 +79,9 @@
Return(Multiply(30, Add(Local0, Local1)))
}
-Device(PRID)
+Device(PRIM)
{
- Name (_ADR, Zero)
+ Name (_ADR, 0)
Method(_GTM, 0)
{
NAME(OTBF, Buffer(20) { /* out buffer */
@@ -206,7 +211,7 @@
}
} /* End Device(MST) */
- Device(SLAV)
+ Device(SLV)
{
Name(_ADR, 1)
Method(_GTF) {
Added: trunk/src/mainboard/siemens/sitemp_g1p1/acpi/platform.asl
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/acpi/platform.asl Wed May 11 09:47:43 2011 (r6567)
@@ -0,0 +1,66 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ * Copyright (C) 2010 Siemens AG, Inc.
+ * (Written by Josef Kellermann <joseph.kellermann at heitec.de> for Siemens AG, Inc.)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+Name(PCIF, 0)
+
+Method(_PIC, 1, NotSerialized)
+{
+ Store(Arg0, PCIF)
+ If (Arg0)
+ {
+ \_SB.PCI0.LPC0.CIRQ()
+ }
+}
+
+External (\_PR.CPU0, DeviceObj)
+External (\_PR.CPU1, DeviceObj)
+
+Scope(\_SB)
+{
+
+ Method(_INI, 0)
+ {
+ Store (2000, OSYS)
+
+ If (CondRefOf(_OSI, Local0)) {
+
+ If (_OSI("Linux")) {
+ Store (1, LINX)
+ }
+
+ If (_OSI("Windows 2001")) {
+ Store (2001, OSYS)
+ }
+
+ If (_OSI("Windows 2001 SP1")) {
+ Store (2001, OSYS)
+ }
+
+ If (_OSI("Windows 2001 SP2")) {
+ Store (2002, OSYS)
+ }
+
+ If (_OSI("Windows 2006")) {
+ Store (2006, OSYS)
+ }
+ }
+ }
+}
\ No newline at end of file
Modified: trunk/src/mainboard/siemens/sitemp_g1p1/acpi/routing.asl
==============================================================================
--- trunk/src/mainboard/amd/dbm690t/acpi/routing.asl Tue May 10 23:53:13 2011 (r6565)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/acpi/routing.asl Wed May 11 09:47:43 2011 (r6567)
@@ -2,6 +2,8 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2008 Advanced Micro Devices, Inc.
+ * Copyright (C) 2010 Siemens AG, Inc.
+ * (Written by Josef Kellermann <joseph.kellermann at heitec.de> for Siemens AG, Inc.)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -16,112 +18,33 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-
-/*
-DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
- )
- {
- #include "routing.asl"
- }
-*/
-
+
/* Routing is in System Bus scope */
-Scope(\_SB) {
+Scope(\_SB)
+{
Name(PR0, Package(){
/* NB devices */
- /* Bus 0, Dev 0 - RS690 Host Controller */
- /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */
- /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */
- Package(){0x0002FFFF, 0, INTC, 0 },
- Package(){0x0002FFFF, 1, INTD, 0 },
- Package(){0x0002FFFF, 2, INTA, 0 },
- Package(){0x0002FFFF, 3, INTB, 0 },
- /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
- /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
- Package(){0x0004FFFF, 0, INTA, 0 },
- Package(){0x0004FFFF, 1, INTB, 0 },
- Package(){0x0004FFFF, 2, INTC, 0 },
- Package(){0x0004FFFF, 3, INTD, 0 },
- /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
- /* Package(){0x0005FFFF, 0, INTB, 0 }, */
- /* Package(){0x0005FFFF, 1, INTC, 0 }, */
- /* Package(){0x0005FFFF, 2, INTD, 0 }, */
- /* Package(){0x0005FFFF, 3, INTA, 0 }, */
- /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */
- Package(){0x0006FFFF, 0, INTC, 0 },
- Package(){0x0006FFFF, 1, INTD, 0 },
- Package(){0x0006FFFF, 2, INTA, 0 },
- Package(){0x0006FFFF, 3, INTB, 0 },
- /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */
- Package(){0x0007FFFF, 0, INTD, 0 },
- Package(){0x0007FFFF, 1, INTA, 0 },
- Package(){0x0007FFFF, 2, INTB, 0 },
- Package(){0x0007FFFF, 3, INTC, 0 },
- /* Bus 0, Funct 8 - Southbridge port (normally hidden) */
-
/* SB devices */
- /* Bus 0, Dev 17 - SATA controller #2 */
/* Bus 0, Dev 18 - SATA controller #1 */
- Package(){0x0012FFFF, 1, INTA, 0 },
+ Package(){0x0012FFFF, 1, \_SB.PCI0.LPC0.INTG, 0 },
/* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */
- Package(){0x0013FFFF, 0, INTA, 0 },
- Package(){0x0013FFFF, 1, INTB, 0 },
- Package(){0x0013FFFF, 2, INTC, 0 },
- Package(){0x0013FFFF, 3, INTD, 0 },
+ Package(){0x0013FFFF, 0, \_SB.PCI0.LPC0.INTA, 0 },
+ Package(){0x0013FFFF, 1, \_SB.PCI0.LPC0.INTB, 0 },
+ Package(){0x0013FFFF, 2, \_SB.PCI0.LPC0.INTC, 0 },
+ Package(){0x0013FFFF, 3, \_SB.PCI0.LPC0.INTD, 0 },
/* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */
- Package(){0x0014FFFF, 0, INTA, 0 },
- Package(){0x0014FFFF, 1, INTB, 0 },
- Package(){0x0014FFFF, 2, INTC, 0 },
- Package(){0x0014FFFF, 3, INTD, 0 },
+ Package(){0x0014FFFF, 0, \_SB.PCI0.LPC0.INTA, 0 },
+ Package(){0x0014FFFF, 1, \_SB.PCI0.LPC0.INTB, 0 },
+ Package(){0x0014FFFF, 2, \_SB.PCI0.LPC0.INTC, 0 },
+ Package(){0x0014FFFF, 3, \_SB.PCI0.LPC0.INTD, 0 },
})
Name(APR0, Package(){
/* NB devices in APIC mode */
/* Bus 0, Dev 0 - RS690 Host Controller */
-
- /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */
- /* Package(){0x0001FFFF, 0, 0, 18 }, */
- /* package(){0x0001FFFF, 1, 0, 19 }, */
-
- /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */
- Package(){0x0002FFFF, 0, 0, 18 },
- /* Package(){0x0002FFFF, 1, 0, 19 }, */
- /* Package(){0x0002FFFF, 2, 0, 16 }, */
- /* Package(){0x0002FFFF, 3, 0, 17 }, */
-
- /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
- Package(){0x0003FFFF, 0, 0, 19 },
-
- /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
- Package(){0x0004FFFF, 0, 0, 16 },
- /* Package(){0x0004FFFF, 1, 0, 17 }, */
- /* Package(){0x0004FFFF, 2, 0, 18 }, */
- /* Package(){0x0004FFFF, 3, 0, 19 }, */
-
- /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
- Package(){0x0005FFFF, 0, 0, 17 },
- /* Package(){0x0005FFFF, 1, 0, 18 }, */
- /* Package(){0x0005FFFF, 2, 0, 19 }, */
- /* Package(){0x0005FFFF, 3, 0, 16 }, */
-
- /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */
- Package(){0x0006FFFF, 0, 0, 18 },
- /* Package(){0x0006FFFF, 1, 0, 19 }, */
- /* Package(){0x0006FFFF, 2, 0, 16 }, */
- /* Package(){0x0006FFFF, 3, 0, 17 }, */
-
- /* Bus 0, Dev 7 - PCIe Bridge for network card */
- Package(){0x0007FFFF, 0, 0, 19 },
- /* Package(){0x0007FFFF, 1, 0, 16 }, */
- /* Package(){0x0007FFFF, 2, 0, 17 }, */
- /* Package(){0x0007FFFF, 3, 0, 18 }, */
-
- /* Bus 0, Funct 8 - Southbridge port (normally hidden) */
-
/* SB devices in APIC mode */
- /* Bus 0, Dev 17 - SATA controller #2 */
/* Bus 0, Dev 18 - SATA controller #1 */
Package(){0x0012FFFF, 0, 0, 22 },
@@ -130,42 +53,34 @@
Package(){0x0013FFFF, 1, 0, 17 },
Package(){0x0013FFFF, 2, 0, 18 },
Package(){0x0013FFFF, 3, 0, 19 },
- /* Package(){0x00130004, 2, 0, 18 }, */
- /* Package(){0x00130005, 3, 0, 19 }, */
/* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */
- Package(){0x0014FFFF, 0, 0, 16 },
+ Package(){0x0014FFFF, 0, 0, 16 },
Package(){0x0014FFFF, 1, 0, 17 },
Package(){0x0014FFFF, 2, 0, 18 },
Package(){0x0014FFFF, 3, 0, 19 },
- /* Package(){0x00140004, 2, 0, 18 }, */
- /* Package(){0x00140004, 3, 0, 19 }, */
- /* Package(){0x00140005, 1, 0, 17 }, */
- /* Package(){0x00140006, 1, 0, 17 }, */
})
Name(PR1, Package(){
/* Internal graphics - RS690 VGA, Bus1, Dev5 */
- Package(){0x0005FFFF, 0, INTA, 0 },
- Package(){0x0005FFFF, 1, INTB, 0 },
- Package(){0x0005FFFF, 2, INTC, 0 },
- Package(){0x0005FFFF, 3, INTD, 0 },
+ Package(){0x0005FFFF, 0, \_SB.PCI0.LPC0.INTA, 0 },
+ Package(){0x0005FFFF, 1, \_SB.PCI0.LPC0.INTB, 0 },
+ Package(){0x0005FFFF, 2, \_SB.PCI0.LPC0.INTC, 0 },
+ Package(){0x0005FFFF, 3, \_SB.PCI0.LPC0.INTD, 0 },
})
Name(APR1, Package(){
/* Internal graphics - RS690 VGA, Bus1, Dev5 */
Package(){0x0005FFFF, 0, 0, 18 },
Package(){0x0005FFFF, 1, 0, 19 },
- /* Package(){0x0005FFFF, 2, 0, 20 }, */
- /* Package(){0x0005FFFF, 3, 0, 17 }, */
})
Name(PS2, Package(){
/* The external GFX - Hooked to PCIe slot 2 */
- Package(){0x0000FFFF, 0, INTC, 0 },
- Package(){0x0000FFFF, 1, INTD, 0 },
- Package(){0x0000FFFF, 2, INTA, 0 },
- Package(){0x0000FFFF, 3, INTB, 0 },
+ Package(){0x0000FFFF, 0, \_SB.PCI0.LPC0.INTC, 0 },
+ Package(){0x0000FFFF, 1, \_SB.PCI0.LPC0.INTD, 0 },
+ Package(){0x0000FFFF, 2, \_SB.PCI0.LPC0.INTA, 0 },
+ Package(){0x0000FFFF, 3, \_SB.PCI0.LPC0.INTB, 0 },
})
Name(APS2, Package(){
@@ -178,10 +93,10 @@
Name(PS4, Package(){
/* PCIe slot - Hooked to PCIe slot 4 */
- Package(){0x0000FFFF, 0, INTA, 0 },
- Package(){0x0000FFFF, 1, INTB, 0 },
- Package(){0x0000FFFF, 2, INTC, 0 },
- Package(){0x0000FFFF, 3, INTD, 0 },
+ Package(){0x0000FFFF, 0, \_SB.PCI0.LPC0.INTA, 0 },
+ Package(){0x0000FFFF, 1, \_SB.PCI0.LPC0.INTB, 0 },
+ Package(){0x0000FFFF, 2, \_SB.PCI0.LPC0.INTC, 0 },
+ Package(){0x0000FFFF, 3, \_SB.PCI0.LPC0.INTD, 0 },
})
Name(APS4, Package(){
@@ -194,10 +109,10 @@
Name(PS5, Package(){
/* PCIe slot - Hooked to PCIe slot 5 */
- Package(){0x0000FFFF, 0, INTB, 0 },
- Package(){0x0000FFFF, 1, INTC, 0 },
- Package(){0x0000FFFF, 2, INTD, 0 },
- Package(){0x0000FFFF, 3, INTA, 0 },
+ Package(){0x0000FFFF, 0, \_SB.PCI0.LPC0.INTB, 0 },
+ Package(){0x0000FFFF, 1, \_SB.PCI0.LPC0.INTC, 0 },
+ Package(){0x0000FFFF, 2, \_SB.PCI0.LPC0.INTD, 0 },
+ Package(){0x0000FFFF, 3, \_SB.PCI0.LPC0.INTA, 0 },
})
Name(APS5, Package(){
@@ -210,10 +125,10 @@
Name(PS6, Package(){
/* PCIe slot - Hooked to PCIe slot 6 */
- Package(){0x0000FFFF, 0, INTC, 0 },
- Package(){0x0000FFFF, 1, INTD, 0 },
- Package(){0x0000FFFF, 2, INTA, 0 },
- Package(){0x0000FFFF, 3, INTB, 0 },
+ Package(){0x0000FFFF, 0, \_SB.PCI0.LPC0.INTC, 0 },
+ Package(){0x0000FFFF, 1, \_SB.PCI0.LPC0.INTD, 0 },
+ Package(){0x0000FFFF, 2, \_SB.PCI0.LPC0.INTA, 0 },
+ Package(){0x0000FFFF, 3, \_SB.PCI0.LPC0.INTB, 0 },
})
Name(APS6, Package(){
@@ -225,15 +140,15 @@
})
Name(PS7, Package(){
- /* The onboard Ethernet chip - Hooked to PCIe slot 7 */
- Package(){0x0000FFFF, 0, INTD, 0 },
- Package(){0x0000FFFF, 1, INTA, 0 },
- Package(){0x0000FFFF, 2, INTB, 0 },
- Package(){0x0000FFFF, 3, INTC, 0 },
+ /* PCIe slot - Hooked to PCIe slot 7 */
+ Package(){0x0000FFFF, 0, \_SB.PCI0.LPC0.INTD, 0 },
+ Package(){0x0000FFFF, 1, \_SB.PCI0.LPC0.INTA, 0 },
+ Package(){0x0000FFFF, 2, \_SB.PCI0.LPC0.INTB, 0 },
+ Package(){0x0000FFFF, 3, \_SB.PCI0.LPC0.INTC, 0 },
})
Name(APS7, Package(){
- /* The onboard Ethernet chip - Hooked to PCIe slot 7 */
+ /* PCIe slot - Hooked to PCIe slot 7 */
Package(){0x0000FFFF, 0, 0, 19 },
Package(){0x0000FFFF, 1, 0, 16 },
Package(){0x0000FFFF, 2, 0, 17 },
@@ -241,18 +156,23 @@
})
Name(PCIB, Package(){
- /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */
- Package(){0x0005FFFF, 0, 0, 0x14 },
- Package(){0x0005FFFF, 1, 0, 0x15 },
- Package(){0x0005FFFF, 2, 0, 0x16 },
- Package(){0x0005FFFF, 3, 0, 0x17 },
- Package(){0x0006FFFF, 0, 0, 0x15 },
- Package(){0x0006FFFF, 1, 0, 0x16 },
- Package(){0x0006FFFF, 2, 0, 0x17 },
- Package(){0x0006FFFF, 3, 0, 0x14 },
- Package(){0x0007FFFF, 0, 0, 0x16 },
- Package(){0x0007FFFF, 1, 0, 0x17 },
- Package(){0x0007FFFF, 2, 0, 0x14 },
- Package(){0x0007FFFF, 3, 0, 0x15 },
+ /* PCI slots: slot 1 behind Dev14, Fun4. */
+ Package(){0x005FFFF, 0, \_SB.PCI0.LPC0.INTF, 0 }, // Phoenix does it
+ Package(){0x005FFFF, 1, \_SB.PCI0.LPC0.INTG, 0 }, // Phoenix does it
+ Package(){0x004FFFF, 0, \_SB.PCI0.LPC0.INTE, 0 },
+ Package(){0x004FFFF, 1, \_SB.PCI0.LPC0.INTF, 0 },
+ Package(){0x004FFFF, 2, \_SB.PCI0.LPC0.INTG, 0 },
+ Package(){0x004FFFF, 3, \_SB.PCI0.LPC0.INTH, 0 },
+ })
+
+ Name(AP2P, Package(){
+ /* PCI slots: slot 0 behind Dev14, Fun4. */
+ Package(){0x0005FFFF, 0, 0, 21 }, // Phoenix does it
+ Package(){0x0005FFFF, 1, 0, 22 }, // Phoenix does it
+ Package(){0x0004FFFF, 0, 0, 20 },
+ Package(){0x0004FFFF, 1, 0, 21 },
+ Package(){0x0004FFFF, 2, 0, 22 },
+ Package(){0x0004FFFF, 3, 0, 23 },
})
+
}
Modified: trunk/src/mainboard/siemens/sitemp_g1p1/acpi/sata.asl
==============================================================================
--- trunk/src/mainboard/amd/dbm690t/acpi/sata.asl Tue May 10 23:53:13 2011 (r6565)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/acpi/sata.asl Wed May 11 09:47:43 2011 (r6567)
@@ -118,7 +118,7 @@
if (LGreater(\_SB.P0IS,0)) {
sleep(32)
}
- Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+ Notify(\_SB.PCI0.SATA.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */
store(one, \_SB.P0PR)
}
@@ -126,7 +126,7 @@
if (LGreater(\_SB.P1IS,0)) {
sleep(32)
}
- Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+ Notify(\_SB.PCI0.SATA.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
store(one, \_SB.P1PR)
}
@@ -134,7 +134,7 @@
if (LGreater(\_SB.P2IS,0)) {
sleep(32)
}
- Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+ Notify(\_SB.PCI0.SATA.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */
store(one, \_SB.P2PR)
}
@@ -142,8 +142,9 @@
if (LGreater(\_SB.P3IS,0)) {
sleep(32)
}
- Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+ Notify(\_SB.PCI0.SATA.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
store(one, \_SB.P3PR)
}
}
}
+
Added: trunk/src/mainboard/siemens/sitemp_g1p1/acpi/statdef.asl
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/acpi/statdef.asl Wed May 11 09:47:43 2011 (r6567)
@@ -0,0 +1,93 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+/* Status and notification definitions */
+
+#define STA_MISSING 0x00
+#define STA_PRESENT 0x01
+#define STA_ENABLED 0x03
+#define STA_DISABLED 0x09
+#define STA_INVISIBLE 0x0B
+#define STA_UNAVAILABLE 0x0D
+#define STA_VISIBLE 0x0F
+
+/* SMBus status codes */
+#define SMB_OK 0x00
+#define SMB_UnknownFail 0x07
+#define SMB_DevAddrNAK 0x10
+#define SMB_DeviceError 0x11
+#define SMB_DevCmdDenied 0x12
+#define SMB_UnknownErr 0x13
+#define SMB_DevAccDenied 0x17
+#define SMB_Timeout 0x18
+#define SMB_HstUnsuppProtocol 0x19
+#define SMB_Busy 0x1A
+#define SMB_PktChkError 0x1F
+
+/* Device Object Notification Values */
+#define NOTIFY_BUS_CHECK 0x00
+#define NOTIFY_DEVICE_CHECK 0x01
+#define NOTIFY_DEVICE_WAKE 0x02
+#define NOTIFY_EJECT_REQUEST 0x03
+#define NOTIFY_DEVICE_CHECK_JR 0x04
+#define NOTIFY_FREQUENCY_ERROR 0x05
+#define NOTIFY_BUS_MODE 0x06
+#define NOTIFY_POWER_FAULT 0x07
+#define NOTIFY_CAPABILITIES 0x08
+#define NOTIFY_PLD_CHECK 0x09
+#define NOTIFY_SLIT_UPDATE 0x0B
+
+/* Battery Device Notification Values */
+#define NOTIFY_BAT_STATUSCHG 0x80
+#define NOTIFY_BAT_INFOCHG 0x81
+#define NOTIFY_BAT_MAINTDATA 0x82
+
+/* Power Source Object Notification Values */
+#define NOTIFY_PWR_STATUSCHG 0x80
+
+/* Thermal Zone Object Notification Values */
+#define NOTIFY_TZ_STATUSCHG 0x80
+#define NOTIFY_TZ_TRIPPTCHG 0x81
+#define NOTIFY_TZ_DEVLISTCHG 0x82
+#define NOTIFY_TZ_RELTBLCHG 0x83
+
+/* Power Button Notification Values */
+#define NOTIFY_POWER_BUTTON 0x80
+
+/* Sleep Button Notification Values */
+#define NOTIFY_SLEEP_BUTTON 0x80
+
+/* Lid Notification Values */
+#define NOTIFY_LID_STATUSCHG 0x80
+
+/* Processor Device Notification Values */
+#define NOTIFY_CPU_PPCCHG 0x80
+#define NOTIFY_CPU_CSTATECHG 0x81
+#define NOTIFY_CPU_THROTLCHG 0x82
+
+/* User Presence Device Notification Values */
+#define NOTIFY_USR_PRESNCECHG 0x80
+
+/* Battery Device Notification Values */
+#define NOTIFY_ALS_ILLUMCHG 0x80
+#define NOTIFY_ALS_COLORTMPCHG 0x81
+#define NOTIFY_ALS_RESPCHG 0x82
+
+
Added: trunk/src/mainboard/siemens/sitemp_g1p1/acpi/thermal.asl
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/acpi/thermal.asl Wed May 11 09:47:43 2011 (r6567)
@@ -0,0 +1,99 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Siemens AG, Inc.
+ * (Written by Josef Kellermann <joseph.kellermann at heitec.de> for Siemens AG, Inc.)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+/* THERMAL */
+Scope(\_TZ) {
+ Name (KELV, 2732)
+ Name (THOT, 800)
+ Name (TCRT, 850)
+
+ ThermalZone(TZ00) {
+ Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */
+ /* DBGO("\\_TZ\\TZ00\\_AC0\n") */
+ Return(Add(0, 2730))
+ }
+ Method(_AL0,0) { /* Returns package of cooling device to turn on */
+ /* DBGO("\\_TZ\\TZ00\\_AL0\n") */
+ Return(Package() {\_TZ.TZ00.FAN0})
+ }
+ Device (FAN0) {
+ Name(_HID, EISAID("PNP0C0B"))
+ Name(_PR0, Package() {PFN0})
+ }
+
+ PowerResource(PFN0,0,0) {
+ Method(_STA) {
+ Store(0xF,Local0)
+ Return(Local0)
+ }
+ Method(_ON) {
+ /* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */
+ }
+ Method(_OFF) {
+ /* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */
+ }
+ }
+
+ // Processors used for active cooling
+ Method (_PSL, 0, Serialized)
+ {
+ If (MPEN) {
+ Return (Package() {\_PR.CPU0, \_PR.CPU1})
+ }
+ Return (Package() {\_PR.CPU0})
+ }
+
+ Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */
+ /* DBGO("\\_TZ\\TZ00\\_HOT\n") */
+ Return (Add (THOT, KELV))
+ }
+ Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */
+ /* DBGO("\\_TZ\\TZ00\\_CRT\n") */
+ Return (Add (TCRT, KELV))
+ }
+ Method(_TMP,0) { /* return current temp of this zone */
+ Store (SMBR (0x07, 0x4C,, 0x00), Local0)
+ If (LGreater (Local0, 0x10)) {
+ Store (Local0, Local1)
+ }
+ Else {
+ Add (Local0, THOT, Local0)
+ Return (Add (400, KELV))
+ }
+
+ Store (SMBR (0x07, 0x4C, 0x01), Local0)
+ /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */
+ /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */
+ If (LGreater (Local0, 0x10)) {
+ If (LGreater (Local0, Local1)) {
+ Store (Local0, Local1)
+ }
+
+ Multiply (Local1, 10, Local1)
+ Return (Add (Local1, KELV))
+ }
+ Else {
+ Add (Local0, THOT, Local0)
+ Return (Add (400 , KELV))
+ }
+ } /* end of _TMP */
+ } /* end of TZ00 */
+}
\ No newline at end of file
Modified: trunk/src/mainboard/siemens/sitemp_g1p1/acpi/usb.asl
==============================================================================
--- trunk/src/mainboard/amd/dbm690t/acpi/usb.asl Tue May 10 23:53:13 2011 (r6565)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/acpi/usb.asl Wed May 11 09:47:43 2011 (r6567)
@@ -18,13 +18,6 @@
*/
/* simple name description */
-/*
-DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
- )
- {
- #include "usb.asl"
- }
-*/
Method(UCOC, 0) {
Sleep(20)
Store(0x13,CMTI)
@@ -38,7 +31,7 @@
UCOC()
if(LEqual(GPB0,PLC0)) {
Not(PLC0,PLC0)
- Store(PLC0, \_SB.PT0D)
+ Store(PLC0, \_SB_.PT0D)
}
}
}
@@ -51,7 +44,7 @@
UCOC()
if (LEqual(GPB1,PLC1)) {
Not(PLC1,PLC1)
- Store(PLC1, \_SB.PT1D)
+ Store(PLC1, \_SB_.PT1D)
}
}
}
@@ -64,7 +57,7 @@
UCOC()
if (LEqual(GPB2,PLC2)) {
Not(PLC2,PLC2)
- Store(PLC2, \_SB.PT2D)
+ Store(PLC2, \_SB_.PT2D)
}
}
}
@@ -77,7 +70,7 @@
UCOC()
if (LEqual(GPB3,PLC3)) {
Not(PLC3,PLC3)
- Store(PLC3, \_SB.PT3D)
+ Store(PLC3, \_SB_.PT3D)
}
}
}
@@ -90,7 +83,7 @@
UCOC()
if (LEqual(GPB4,PLC4)) {
Not(PLC4,PLC4)
- Store(PLC4, \_SB.PT4D)
+ Store(PLC4, \_SB_.PT4D)
}
}
}
@@ -103,7 +96,7 @@
UCOC()
if (LEqual(GPB5,PLC5)) {
Not(PLC5,PLC5)
- Store(PLC5, \_SB.PT5D)
+ Store(PLC5, \_SB_.PT5D)
}
}
}
@@ -117,7 +110,7 @@
UCOC()
if (LEqual(GPB6,PLC6)) {
Not(PLC6,PLC6)
- Store(PLC6, \_SB.PT6D)
+ Store(PLC6, \_SB_.PT6D)
}
}
}
@@ -131,7 +124,7 @@
UCOC()
if (LEqual(GPB7,PLC7)) {
Not(PLC7,PLC7)
- Store(PLC7, \_SB.PT7D)
+ Store(PLC7, \_SB_.PT7D)
}
}
}
@@ -143,7 +136,7 @@
Method (_L17) {
if (LEqual(G8IS,PLC8)) {
Not(PLC8,PLC8)
- Store(PLC8, \_SB.PT8D)
+ Store(PLC8, \_SB_.PT8D)
}
}
}
@@ -154,7 +147,7 @@
Scope (\_GPE) {
Method (_L0E) {
if (LEqual(G9IS,0)) {
- Store(1,\_SB.PT9D)
+ Store(1,\_SB_.PT9D)
}
}
}
Modified: trunk/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c
==============================================================================
--- trunk/src/mainboard/amd/dbm690t/acpi_tables.c Tue May 10 23:53:13 2011 (r6565)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c Wed May 11 09:47:43 2011 (r6567)
@@ -2,6 +2,8 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2008 Advanced Micro Devices, Inc.
+ * Copyright (C) 2010 Siemens AG, Inc.
+ * (Written by Josef Kellermann <joseph.kellermann at heitec.de> for Siemens AG, Inc.)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,19 +23,25 @@
#include <string.h>
#include <arch/acpi.h>
#include <arch/ioapic.h>
+#include <arch/smp/mpspec.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <cpu/x86/msr.h>
#include <cpu/amd/mtrr.h>
#include <cpu/amd/amdk8_sysconf.h>
-#include "northbridge/amd/amdk8/acpi.h"
+#include <../../../northbridge/amd/amdk8/acpi.h>
#include <arch/cpu.h>
#include <cpu/amd/model_fxx_powernow.h>
-
-extern u16 pm_base;
+#include <southbridge/amd/rs690/rs690.h>
#define DUMP_ACPI_TABLES 0
+#ifndef CONFIG_LINT01_CONVERSION
+#define CONFIG_LINT01_CONVERSION 1
+#endif
+
+extern u16 pm_base;
+
/*
* Assume the max pstate number is 8
* 0x21(33 bytes) is one package length of _PSS package
@@ -41,11 +49,67 @@
#define Maxpstate 8
#define Defpkglength 0x21
+#define GLOBAL_VARS_SIZE 0x100
+
+typedef struct {
+ /* Miscellaneous */
+ u16 osys;
+ u16 linx;
+ u32 pcba;
+ u8 mpen;
+ u8 reserv[247];
+} __attribute__((packed)) global_vars_t;
+
+static void acpi_write_gvars(global_vars_t *gvars)
+{
+ device_t dev;
+ struct resource *res;
+
+ memset((void *)gvars, 0, GLOBAL_VARS_SIZE);
+
+ gvars->pcba = EXT_CONF_BASE_ADDRESS;
+ dev = dev_find_slot(0, PCI_DEVFN(0,0));
+ res = probe_resource(dev, 0x1C);
+ if( res )
+ gvars->pcba = res->base;
+
+ gvars->mpen = 1;
+}
+
+static void acpi_create_my_hpet(acpi_hpet_t *hpet)
+{
+#define HPET_ADDR 0xfed00000ULL
+ acpi_header_t *header=&(hpet->header);
+ acpi_addr_t *addr=&(hpet->addr);
+
+ memset((void *)hpet, 0, sizeof(acpi_hpet_t));
+
+ /* fill out header fields */
+ memcpy(header->signature, "HPET", 4);
+ memcpy(header->oem_id, OEM_ID, 6);
+ memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8);
+ memcpy(header->asl_compiler_id, ASLC, 4);
+
+ header->length = sizeof(acpi_hpet_t);
+ header->revision = 1;
+
+ /* fill out HPET address */
+ addr->space_id = 0; /* Memory */
+ addr->bit_width = 64;
+ addr->bit_offset = 0;
+ addr->addrl = HPET_ADDR & 0xffffffff;
+ addr->addrh = HPET_ADDR >> 32;
+
+ hpet->id = 0x43538301;
+ hpet->number = 0;
+ hpet->min_tick = 20;
+
+ header->checksum = acpi_checksum((void *)hpet, sizeof(acpi_hpet_t));
+}
#if DUMP_ACPI_TABLES == 1
static void dump_mem(u32 start, u32 end)
{
-
u32 i;
print_debug("dump_mem:");
for (i = start; i < end; i++) {
@@ -62,7 +126,17 @@
unsigned long acpi_fill_mcfg(unsigned long current)
{
- /* Just a dummy */
+ struct resource *res;
+ resource_t mmconf_base = EXT_CONF_BASE_ADDRESS; // default
+
+ device_t dev = dev_find_slot(0,PCI_DEVFN(0,0));
+ // we report mmconf base
+ res = probe_resource(dev, 0x1C);
+ if( res )
+ mmconf_base = res->base;
+
+ current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *)current, mmconf_base, 0x0, 0x0, 0x1f); // Fix me: should i reserve 255 busses ?
+
return current;
}
@@ -74,20 +148,23 @@
/* Write SB600 IOAPIC, only one */
current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2,
IO_APIC_ADDR, 0);
-
+#if CONFIG_LINT01_CONVERSION == 0
current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
current, 0, 0, 2, 0);
+
current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
- current, 0, 9, 9, 0xF);
- /* 0: mean bus 0--->ISA */
+ current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW);
+#else
+ /* 0: mean bus 0--->ISA */
/* 0: PIC 0 */
/* 2: APIC 2 */
/* 5 mean: 0101 --> Edige-triggered, Active high */
/* create all subtables for processors */
- /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */
+ current = acpi_create_madt_lapic_nmis(current, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1);
/* 1: LINT1 connect to NMI */
-
+ set_nbcfg_enable_bits(dev_find_slot(0, PCI_DEVFN(0x18, 0)), 0x68, 1 << 16, 1 << 16); // Local Interrupt Conversion Enable
+#endif
return current;
}
@@ -97,99 +174,126 @@
return (unsigned long) (acpigen_get_current());
}
+#define ALIGN_CURRENT current = ((current + 0x0f) & -0x10)
+
unsigned long write_acpi_tables(unsigned long start)
{
unsigned long current;
+ int i;
+
acpi_rsdp_t *rsdp;
acpi_rsdt_t *rsdt;
+ acpi_srat_t *srat;
+ acpi_xsdt_t *xsdt;
+ acpi_mcfg_t *mcfg;
acpi_hpet_t *hpet;
acpi_madt_t *madt;
acpi_fadt_t *fadt;
acpi_facs_t *facs;
acpi_header_t *dsdt;
acpi_header_t *ssdt;
-
+
get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */
/* Align ACPI tables to 16byte */
- start = (start + 0x0f) & -0x10;
current = start;
+ ALIGN_CURRENT;
printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start);
/* We need at least an RSDP and an RSDT Table */
rsdp = (acpi_rsdp_t *) current;
current += sizeof(acpi_rsdp_t);
+ ALIGN_CURRENT;
rsdt = (acpi_rsdt_t *) current;
current += sizeof(acpi_rsdt_t);
-
+ ALIGN_CURRENT;
+ xsdt = (acpi_xsdt_t *) current;
+ current += sizeof(acpi_xsdt_t);
+ ALIGN_CURRENT;
+
/* clear all table memory */
memset((void *)start, 0, current - start);
- acpi_write_rsdp(rsdp, rsdt, NULL);
+ acpi_write_rsdp(rsdp, rsdt, xsdt);
acpi_write_rsdt(rsdt);
-
+ acpi_write_xsdt(xsdt);
/*
* We explicitly add these tables later on:
*/
- /* If we want to use HPET Timers Linux wants an MADT */
+ current = ALIGN(current, 64);
+ /* FACS */
+ printk(BIOS_DEBUG, "ACPI: * FACS\n");
+ facs = (acpi_facs_t *) current;
+ acpi_create_facs(facs);
+ current += sizeof(acpi_facs_t);
+
+ /* HPET */
printk(BIOS_DEBUG, "ACPI: * HPET\n");
hpet = (acpi_hpet_t *) current;
+ acpi_create_my_hpet(hpet);
current += sizeof(acpi_hpet_t);
- acpi_create_hpet(hpet);
acpi_add_table(rsdp, hpet);
-
+
+ /* If we want to use HPET Timers Linux wants an MADT */
printk(BIOS_DEBUG, "ACPI: * MADT\n");
madt = (acpi_madt_t *) current;
acpi_create_madt(madt);
current += madt->header.length;
acpi_add_table(rsdp, madt);
+ /* MCFG */
+ printk(BIOS_DEBUG, "ACPI: * MCFG\n");
+ mcfg = (acpi_mcfg_t *) current;
+ acpi_create_mcfg(mcfg);
+ current += mcfg->header.length;
+ acpi_add_table(rsdp, mcfg);
+
/* SSDT */
printk(BIOS_DEBUG, "ACPI: * SSDT\n");
ssdt = (acpi_header_t *)current;
-
- acpi_create_ssdt_generator(ssdt, "DYNADATA");
+ acpi_create_ssdt_generator(ssdt, "COREBOOT");
current += ssdt->length;
- acpi_add_table(rsdp, ssdt);
-
- /* FACS */
- printk(BIOS_DEBUG, "ACPI: * FACS\n");
- facs = (acpi_facs_t *) current;
- current += sizeof(acpi_facs_t);
- acpi_create_facs(facs);
-
+ acpi_add_table(rsdp, ssdt);
+
/* DSDT */
printk(BIOS_DEBUG, "ACPI: * DSDT\n");
dsdt = (acpi_header_t *)current;
memcpy(dsdt, &AmlCode, sizeof(acpi_header_t));
current += dsdt->length;
memcpy(dsdt, &AmlCode, dsdt->length);
- printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length);
+
+ /* Pack gvars into the ACPI table area */
+ for (i=0; i < dsdt->length; i++) {
+ if (*(u32*)(((u32)dsdt) + i) == 0xBADEAFFE) {
+ printk(BIOS_DEBUG, "ACPI: Patching up globals in DSDT at offset 0x%04x -> 0x%08lx\n", i, current);
+ *(u32*)(((u32)dsdt) + i) = current;
+ break;
+ }
+ }
+
+ /* And fill it */
+ acpi_write_gvars((global_vars_t *)current);
+ current += GLOBAL_VARS_SIZE;
+ /* We patched up the DSDT, so we need to recalculate the checksum */
+ dsdt->checksum = 0;
+ dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length);
+ printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length);
+
/* FADT */
printk(BIOS_DEBUG, "ACPI: * FADT\n");
fadt = (acpi_fadt_t *) current;
current += sizeof(acpi_fadt_t);
-
acpi_create_fadt(fadt, facs, dsdt);
acpi_add_table(rsdp, fadt);
-#if DUMP_ACPI_TABLES == 1
- printk(BIOS_DEBUG, "rsdp\n");
- dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t));
-
- printk(BIOS_DEBUG, "rsdt\n");
- dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t));
+ /* SRAT */
+ printk(BIOS_DEBUG, "ACPI: * SRAT\n");
+ srat = (acpi_srat_t *) current;
+ acpi_create_srat(srat);
+ acpi_add_table(rsdp, srat);
- printk(BIOS_DEBUG, "madt\n");
- dump_mem(madt, ((void *)madt) + madt->header.length);
-
- printk(BIOS_DEBUG, "ssdt\n");
- dump_mem(ssdt, ((void *)ssdt) + ssdt->length);
-
- printk(BIOS_DEBUG, "fadt\n");
- dump_mem(fadt, ((void *)fadt) + fadt->header.length);
-#endif
+ printk(BIOS_DEBUG, "current = %lx\n", current);
printk(BIOS_INFO, "ACPI: done.\n");
return current;
Modified: trunk/src/mainboard/siemens/sitemp_g1p1/chip.h
==============================================================================
--- trunk/src/mainboard/amd/dbm690t/chip.h Tue May 10 23:53:13 2011 (r6565)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/chip.h Wed May 11 09:47:43 2011 (r6567)
@@ -2,6 +2,8 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2008 Advanced Micro Devices, Inc.
+ * Copyright (C) 2010 Siemens AG, Inc.
+ * (Written by Josef Kellermann <joseph.kellermann at heitec.de> for Siemens AG, Inc.)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -18,4 +20,10 @@
*/
extern struct chip_operations mainboard_ops;
-struct mainboard_config {};
+
+struct mainboard_config
+{
+ u32 uma_size; /* How many UMA should be used in memory for TOP. */
+ unsigned int plx_present : 1;
+};
+
Modified: trunk/src/mainboard/siemens/sitemp_g1p1/cmos.layout
==============================================================================
--- trunk/src/mainboard/amd/dbm690t/cmos.layout Tue May 10 23:53:13 2011 (r6565)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/cmos.layout Wed May 11 09:47:43 2011 (r6567)
@@ -2,6 +2,8 @@
## This file is part of the coreboot project.
##
## Copyright (C) 2008 Advanced Micro Devices, Inc.
+## Copyright (C) 2010 Siemens AG, Inc.
+## (Written by Josef Kellermann <joseph.kellermann at heitec.de> for Siemens AG, Inc.)
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
@@ -32,9 +34,11 @@
#56 8 r 0 day_of_month
#64 8 r 0 month
#72 8 r 0 year
+# =======================================================
#80 4 r 0 rate_select
#84 3 r 0 REF_Clock
#87 1 r 0 UIP
+# =======================================================
#88 1 r 0 auto_switch_DST
#89 1 r 0 24_hour_mode
#90 1 r 0 binary_values_enable
@@ -43,28 +47,44 @@
#93 1 r 0 alarm_interrupt_enable
#94 1 r 0 periodic_interrupt_enable
#95 1 r 0 disable_clock_updates
+# ========================================================
#96 288 r 0 temporary_filler
0 384 r 0 reserved_memory
-384 1 e 4 boot_option
-385 1 e 4 last_boot
-386 1 e 1 ECC_memory
+# ========================================================
+#384 1 e 4 unused
+385 1 r 4 last_boot
+#386 1 r 1 unused
+387 1 e 16 cmos_defaults_loaded
388 4 r 0 reboot_bits
392 3 e 5 baud_rate
-395 1 e 1 hw_scrubber
-396 1 e 1 interleave_chip_selects
-397 2 e 8 max_mem_clock
+#395 1 r 1 unused
+#396 1 r 1 unused
+#397 2 r 8 unused
399 1 e 2 multi_core
-400 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-416 4 e 7 boot_first
-420 4 e 7 boot_second
-424 4 e 7 boot_third
-428 4 h 0 boot_index
-432 8 h 0 boot_countdown
-440 4 e 9 slow_cpu
-444 1 e 1 nmi
-445 1 e 1 iommu
-728 256 h 0 user_data
+#400 8 r 18 reserved
+408 4 e 6 debug_level
+412 1 e 1 power_on_after_fail
+#413 1 r 1 unused
+414 1 e 17 sata_mode
+415 1 e 1 nmi
+416 1 e 1 cpu_fan_control
+417 1 e 1 chassis_fan_control
+418 1 e 13 cpu_fan_polarity
+419 1 e 13 chassis_fan_polarity
+420 4 e 14 cpu_t_min
+424 4 e 14 cpu_t_max
+428 4 e 15 cpu_dutycycle_min
+432 4 e 15 cpu_dutycycle_max
+436 4 e 14 chassis_t_min
+440 4 e 14 chassis_t_max
+444 4 e 15 chassis_dutycycle_min
+448 4 e 15 chassis_dutycycle_max
+#452 4 r 9 unused
+456 4 e 10 boot_delay
+460 4 e 11 lcd_panel_id
+#===========================================================
+464 512 s 0 boot_devices
+976 8 h 0 boot_default
984 16 h 0 check_sum
# Reserve the extended AMD configuration registers
1000 24 r 0 amd_reserved
@@ -88,30 +108,100 @@
5 5 4800
5 6 2400
5 7 1200
-6 6 Notice
-6 7 Info
-6 8 Debug
-6 9 Spew
-7 0 Network
-7 1 HDD
-7 2 Floppy
-7 8 Fallback_Network
-7 9 Fallback_HDD
-7 10 Fallback_Floppy
+6 4 Warning
+6 5 Notice
+6 6 Info
+6 7 Debug
+6 8 Spew
+#7 0 Network
+#7 1 HDD
+#7 2 Floppy
+#7 8 Fallback_Network
+#7 9 Fallback_HDD
+#7 10 Fallback_Floppy
#7 3 ROM
8 0 DDR400
8 1 DDR333
8 2 DDR266
8 3 DDR200
-9 0 off
-9 1 87.5%
-9 2 75.0%
-9 3 62.5%
-9 4 50.0%
-9 5 37.5%
-9 6 25.0%
-9 7 12.5%
-
+# boot delay
+10 0 off
+10 1 1s
+10 2 2s
+10 3 3s
+10 4 4s
+10 5 5s
+10 6 6s
+10 7 7s
+10 8 8s
+10 9 9s
+10 10 10s
+# LCD Panel ID
+11 0 no_panel
+11 1 1024x768_65MHz_Dual
+11 2 1920x1200_162MHz
+11 3 1600x1200_162MHz
+11 4 1024x768_65MHz
+11 5 1400x1050_108MHz
+11 6 1680x1050_119MHz
+11 7 2048x1536_164MHz
+11 8 1280x1024_108MHz
+11 9 1366x768_86MHz_chimei_V32B1L01
+# TV Standard
+#12 0 NTSC
+#12 1 PAL
+#12 2 PALM
+#12 3 PAL60
+#12 4 NTSCJ
+#12 5 PALCN
+#12 6 PALN
+#12 9 SCART-RGB
+#12 15 no_tv
+# CPU/Chassis FAN Control: polarity
+13 0 Active_high
+13 1 Active_low
+# Temperature °C
+14 0 30
+14 1 35
+14 2 40
+14 3 45
+14 4 50
+14 5 55
+14 6 60
+14 7 65
+14 8 70
+14 9 75
+14 10 80
+14 11 85
+14 12 90
+14 13 95
+14 14 100
+# Dutycycle %
+15 0 25%
+15 1 30%
+15 2 35%
+15 3 40%
+15 4 45%
+15 5 50%
+15 6 55%
+15 7 60%
+15 8 65%
+15 9 70%
+15 10 75%
+15 11 80%
+15 12 85%
+15 13 90%
+15 14 95%
+15 15 100%
+# cmos_defaults_loaded
+16 0 No
+16 1 Yes
+# sata_mode
+17 0 AHCI
+17 1 IDE
+# reserved
+18 32 2000
+# ==============================
checksums
checksum 392 983 984
Modified: trunk/src/mainboard/siemens/sitemp_g1p1/devicetree.cb
==============================================================================
--- trunk/src/mainboard/amd/dbm690t/devicetree.cb Tue May 10 23:53:13 2011 (r6565)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/devicetree.cb Wed May 11 09:47:43 2011 (r6567)
@@ -15,30 +15,41 @@
end
end
device pci_domain 0 on
- subsystemid 0x1022 0x3050 inherit
+ subsystemid 0x110a 0x4076 inherit
chip northbridge/amd/amdk8
device pci 18.0 on # southbridge
chip southbridge/amd/rs690
- device pci 0.0 on end # HT 0x7910
+ device pci 0.0 on # Northbridge configuration space (0x7910)
+ end
device pci 1.0 on # Internal Graphics P2P bridge 0x7912
- device pci 5.0 on end # Internal Graphics 0x791F
+ device pci 5.0 on # Internal Graphics 0x791F
+ end
+ device pci 5.2 on #
+ end
+ end
+ device pci 2.0 on # PCIE P2P bridge 0x7913 (external GFX-port0)
+ end
+ device pci 3.0 off # PCIE P2P bridge 0x791b (external GFX-port1)
+ end
+ device pci 4.0 on # PCIE P2P bridge port 0 (0x7914)
+ end
+ device pci 5.0 on # PCIE P2P bridge port 1 (0x7915)
+ end
+ device pci 6.0 on # PCIE P2P bridge port 2 (0x7916)
+ end
+ device pci 7.0 on # PCIE P2P bridge port 3 (0x7917)
+ end
+ device pci 8.0 off # NB/SB Link P2P bridge
end
- device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913
- device pci 3.0 off end # PCIE P2P bridge 0x791b
- device pci 4.0 on end # PCIE P2P bridge 0x7914
- device pci 5.0 on end # PCIE P2P bridge 0x7915
- device pci 6.0 on end # PCIE P2P bridge 0x7916
- device pci 7.0 on end # PCIE P2P bridge 0x7917
- device pci 8.0 off end # NB/SB Link P2P bridge
register "gpp_configuration" = "4"
register "port_enable" = "0xfc"
register "gfx_dev2_dev3" = "1"
register "gfx_dual_slot" = "0"
register "gfx_lane_reversal" = "0"
- register "gfx_tmds" = "0"
+ register "gfx_tmds" = "1" # needed for DVI output, but this results in a conflict if PLX installed !
register "gfx_compliance" = "0"
register "gfx_reconfiguration" = "1"
- register "gfx_link_width" = "0"
+ register "gfx_link_width" = "0" # 4 (0x8) if PLX installed
end
chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus
device pci 12.0 on end # SATA 0x4380
@@ -48,7 +59,7 @@
device pci 13.3 on end # USB 0x438a
device pci 13.4 on end # USB 0x438b
device pci 13.5 on end # USB 2 0x4386
- device pci 14.0 on # SM 0x4385
+ device pci 14.0 on # SM 0x4385
chip drivers/generic/generic #dimm 0-0-0
device i2c 50 on end
end
@@ -75,7 +86,7 @@
io 0x60 = 0x3f8
irq 0x70 = 4
end
- device pnp 2e.2 off # Com2
+ device pnp 2e.2 on # Com2
io 0x60 = 0x2f8
irq 0x70 = 3
end
@@ -107,7 +118,9 @@
device pci 14.4 on end # PCI 0x4384
device pci 14.5 on end # ACI 0x4382
device pci 14.6 on end # MCI 0x438e
- register "hda_viddid" = "0x10ec0882"
+# register "ide0_enable" = "1"
+# register "sata0_enable" = "1"
+ register "hda_viddid" = "0x10ec0882"
end #southbridge/amd/sb600
end # device pci 18.0
Modified: trunk/src/mainboard/siemens/sitemp_g1p1/dsdt.asl
==============================================================================
--- trunk/src/mainboard/amd/dbm690t/dsdt.asl Tue May 10 23:53:13 2011 (r6565)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/dsdt.asl Wed May 11 09:47:43 2011 (r6567)
@@ -2,6 +2,8 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2008 Advanced Micro Devices, Inc.
+ * Copyright (C) 2010 Siemens AG, Inc.
+ * (Written by Josef Kellermann <joseph.kellermann at heitec.de> for Siemens AG, Inc.)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -17,30 +19,13 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-/* DefinitionBlock Statement */
-DefinitionBlock (
- "DSDT.AML", /* Output filename */
- "DSDT", /* Signature */
- 0x02, /* DSDT Revision, needs to be 2 for 64bit */
- "AMD ", /* OEMID */
- "DBM690T ", /* TABLE ID */
- 0x00010001 /* OEM Revision */
- )
-{ /* Start of ASL file */
- /* #include "../../../arch/x86/acpi/debug.asl" */ /* Include global debug methods if needed */
-
+DefinitionBlock ("DSDT.aml", "DSDT", 2, "SIEMENS", "SITEMP ", 0x20101005)
+{
/* Data to be patched by the BIOS during POST */
- /* FIXME the patching is not done yet! */
/* Memory related values */
Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */
- Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
- Name(PBLN, 0x0) /* Length of BIOS area */
-
- Name(PCBA, 0xE0000000) /* Base address of PCIe config space */
Name(HPBA, 0xFED00000) /* Base address of HPET table */
- Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
-
/* USB overcurrent mapping pins. */
Name(UOM0, 0)
Name(UOM1, 2)
@@ -52,11 +37,9 @@
Name(UOM7, 2)
Name(UOM8, 6)
Name(UOM9, 6)
-
- /* Some global data */
- Name(OSTP, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
- Name(OSV, Ones) /* Assume nothing */
- Name(PMOD, One) /* Assume APIC */
+
+ Name(DSEN, 1) // Display Output Switching Enable
+ // Power notification
/* PIC IRQ mapping registers, C00h-C01h */
OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002)
@@ -69,11 +52,8 @@
PINB, 0x00000008, /* Index 1 */
PINC, 0x00000008, /* Index 2 */
PIND, 0x00000008, /* Index 3 */
- AINT, 0x00000008, /* Index 4 */
- SINT, 0x00000008, /* Index 5 */
- , 0x00000008, /* Index 6 */
- AAUD, 0x00000008, /* Index 7 */
- AMOD, 0x00000008, /* Index 8 */
+ SINT, 0x00000008, /* Index 4 */
+ Offset(0x09),
PINE, 0x00000008, /* Index 9 */
PINF, 0x00000008, /* Index A */
PING, 0x00000008, /* Index B */
@@ -263,16 +243,26 @@
PWDA, 1,
}
- Scope(\_SB) {
+ OperationRegion (GVAR, SystemMemory, 0xBADEAFFE, 0x100)
+ Field (GVAR, ByteAcc, NoLock, Preserve)
+ {
+ Offset (0x00),
+ OSYS, 16,
+ LINX, 16,
+ PCBA, 32,
+ MPEN, 8
+ }
+
+ Name (IOLM,0xe0000000)
+
+#include "acpi/platform.asl"
+ Scope(\_SB) {
+
/* PCIe Configuration Space for 16 busses */
- OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */
+ OperationRegion(PCFG, SystemMemory, PCBA, 0x2000000) /* PCIe reserved space for 31 busses */
Field(PCFG, ByteAcc, NoLock, Preserve) {
- /* Byte offsets are computed using the following technique:
- * ((bus number + 1) * ((device number * 8) * 4096)) + register offset
- * The 8 comes from 8 functions per device, and 4096 bytes per function config space
- */
- Offset(0x00090024), /* Byte offset to SATA register 24h - Bus 0, Device 18, Function 0 */
+ Offset(0x00090024), /* Byte offset to SATA BAR5 register 24h - Bus 0, Device 18, Function 0 */
STB5, 32,
Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */
PT0D, 1,
@@ -296,9 +286,9 @@
,14,
P92E, 1, /* Port92 decode enable */
}
-
- OperationRegion(SB5, SystemMemory, STB5, 0x1000)
- Field(SB5, AnyAcc, NoLock, Preserve)
+
+ OperationRegion(BAR5, SystemMemory, STB5, 0x1000)
+ Field(BAR5, AnyAcc, NoLock, Preserve)
{
/* Port 0 */
Offset(0x120), /* Port 0 Task file status */
@@ -369,794 +359,113 @@
P3PR, 1,
}
}
-
- #include "acpi/routing.asl"
-
- Scope(\_SB) {
-
- Method(CkOT, 0){
-
- if(LNotEqual(OSTP, Ones)) {Return(OSTP)} /* OS version was already detected */
-
- if(CondRefOf(\_OSI,Local1))
- {
- Store(1, OSTP) /* Assume some form of XP */
- if (\_OSI("Windows 2006")) /* Vista */
- {
- Store(2, OSTP)
- }
- } else {
- If(WCMP(\_OS,"Linux")) {
- Store(3, OSTP) /* Linux */
- } Else {
- Store(4, OSTP) /* Gotta be WinCE */
- }
- }
- Return(OSTP)
- }
-
- Method(_PIC, 0x01, NotSerialized)
- {
- If (Arg0)
- {
- \_SB.CIRQ()
- }
- Store(Arg0, PMOD)
- }
-
- Method(CIRQ, 0x00, NotSerialized)
- {
- Store(0, PINA)
- Store(0, PINB)
- Store(0, PINC)
- Store(0, PIND)
- Store(0, PINE)
- Store(0, PINF)
- Store(0, PING)
- Store(0, PINH)
- }
-
- Name(IRQB, ResourceTemplate(){
- IRQ(Level,ActiveLow,Shared){15}
- })
-
- Name(IRQP, ResourceTemplate(){
- IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15}
- })
-
- Name(PITF, ResourceTemplate(){
- IRQ(Level,ActiveLow,Exclusive){9}
- })
-
- Device(INTA) {
- Name(_HID, EISAID("PNP0C0F"))
- Name(_UID, 1)
-
- Method(_STA, 0) {
- if (PINA) {
- Return(0x0B) /* sata is invisible */
- } else {
- Return(0x09) /* sata is disabled */
- }
- } /* End Method(_SB.INTA._STA) */
-
- Method(_DIS ,0) {
- /* DBGO("\\_SB\\LNKA\\_DIS\n") */
- Store(0, PINA)
- } /* End Method(_SB.INTA._DIS) */
-
- Method(_PRS ,0) {
- /* DBGO("\\_SB\\LNKA\\_PRS\n") */
- Return(IRQP)
- } /* Method(_SB.INTA._PRS) */
-
- Method(_CRS ,0) {
- /* DBGO("\\_SB\\LNKA\\_CRS\n") */
- CreateWordField(IRQB, 0x1, IRQN)
- ShiftLeft(1, PINA, IRQN)
- Return(IRQB)
- } /* Method(_SB.INTA._CRS) */
-
- Method(_SRS, 1) {
- /* DBGO("\\_SB\\LNKA\\_CRS\n") */
- CreateWordField(ARG0, 1, IRQM)
-
- /* Use lowest available IRQ */
- FindSetRightBit(IRQM, Local0)
- if (Local0) {
- Decrement(Local0)
- }
- Store(Local0, PINA)
- } /* End Method(_SB.INTA._SRS) */
- } /* End Device(INTA) */
-
- Device(INTB) {
- Name(_HID, EISAID("PNP0C0F"))
- Name(_UID, 2)
-
- Method(_STA, 0) {
- if (PINB) {
- Return(0x0B) /* sata is invisible */
- } else {
- Return(0x09) /* sata is disabled */
- }
- } /* End Method(_SB.INTB._STA) */
-
- Method(_DIS ,0) {
- /* DBGO("\\_SB\\LNKB\\_DIS\n") */
- Store(0, PINB)
- } /* End Method(_SB.INTB._DIS) */
-
- Method(_PRS ,0) {
- /* DBGO("\\_SB\\LNKB\\_PRS\n") */
- Return(IRQP)
- } /* Method(_SB.INTB._PRS) */
-
- Method(_CRS ,0) {
- /* DBGO("\\_SB\\LNKB\\_CRS\n") */
- CreateWordField(IRQB, 0x1, IRQN)
- ShiftLeft(1, PINB, IRQN)
- Return(IRQB)
- } /* Method(_SB.INTB._CRS) */
-
- Method(_SRS, 1) {
- /* DBGO("\\_SB\\LNKB\\_CRS\n") */
- CreateWordField(ARG0, 1, IRQM)
-
- /* Use lowest available IRQ */
- FindSetRightBit(IRQM, Local0)
- if (Local0) {
- Decrement(Local0)
- }
- Store(Local0, PINB)
- } /* End Method(_SB.INTB._SRS) */
- } /* End Device(INTB) */
-
- Device(INTC) {
- Name(_HID, EISAID("PNP0C0F"))
- Name(_UID, 3)
-
- Method(_STA, 0) {
- if (PINC) {
- Return(0x0B) /* sata is invisible */
- } else {
- Return(0x09) /* sata is disabled */
- }
- } /* End Method(_SB.INTC._STA) */
-
- Method(_DIS ,0) {
- /* DBGO("\\_SB\\LNKC\\_DIS\n") */
- Store(0, PINC)
- } /* End Method(_SB.INTC._DIS) */
-
- Method(_PRS ,0) {
- /* DBGO("\\_SB\\LNKC\\_PRS\n") */
- Return(IRQP)
- } /* Method(_SB.INTC._PRS) */
-
- Method(_CRS ,0) {
- /* DBGO("\\_SB\\LNKC\\_CRS\n") */
- CreateWordField(IRQB, 0x1, IRQN)
- ShiftLeft(1, PINC, IRQN)
- Return(IRQB)
- } /* Method(_SB.INTC._CRS) */
-
- Method(_SRS, 1) {
- /* DBGO("\\_SB\\LNKC\\_CRS\n") */
- CreateWordField(ARG0, 1, IRQM)
-
- /* Use lowest available IRQ */
- FindSetRightBit(IRQM, Local0)
- if (Local0) {
- Decrement(Local0)
- }
- Store(Local0, PINC)
- } /* End Method(_SB.INTC._SRS) */
- } /* End Device(INTC) */
-
- Device(INTD) {
- Name(_HID, EISAID("PNP0C0F"))
- Name(_UID, 4)
-
- Method(_STA, 0) {
- if (PIND) {
- Return(0x0B) /* sata is invisible */
- } else {
- Return(0x09) /* sata is disabled */
- }
- } /* End Method(_SB.INTD._STA) */
-
- Method(_DIS ,0) {
- /* DBGO("\\_SB\\LNKD\\_DIS\n") */
- Store(0, PIND)
- } /* End Method(_SB.INTD._DIS) */
-
- Method(_PRS ,0) {
- /* DBGO("\\_SB\\LNKD\\_PRS\n") */
- Return(IRQP)
- } /* Method(_SB.INTD._PRS) */
-
- Method(_CRS ,0) {
- /* DBGO("\\_SB\\LNKD\\_CRS\n") */
- CreateWordField(IRQB, 0x1, IRQN)
- ShiftLeft(1, PIND, IRQN)
- Return(IRQB)
- } /* Method(_SB.INTD._CRS) */
-
- Method(_SRS, 1) {
- /* DBGO("\\_SB\\LNKD\\_CRS\n") */
- CreateWordField(ARG0, 1, IRQM)
-
- /* Use lowest available IRQ */
- FindSetRightBit(IRQM, Local0)
- if (Local0) {
- Decrement(Local0)
- }
- Store(Local0, PIND)
- } /* End Method(_SB.INTD._SRS) */
- } /* End Device(INTD) */
-
- Device(INTE) {
- Name(_HID, EISAID("PNP0C0F"))
- Name(_UID, 5)
-
- Method(_STA, 0) {
- if (PINE) {
- Return(0x0B) /* sata is invisible */
- } else {
- Return(0x09) /* sata is disabled */
- }
- } /* End Method(_SB.INTE._STA) */
-
- Method(_DIS ,0) {
- /* DBGO("\\_SB\\LNKE\\_DIS\n") */
- Store(0, PINE)
- } /* End Method(_SB.INTE._DIS) */
-
- Method(_PRS ,0) {
- /* DBGO("\\_SB\\LNKE\\_PRS\n") */
- Return(IRQP)
- } /* Method(_SB.INTE._PRS) */
-
- Method(_CRS ,0) {
- /* DBGO("\\_SB\\LNKE\\_CRS\n") */
- CreateWordField(IRQB, 0x1, IRQN)
- ShiftLeft(1, PINE, IRQN)
- Return(IRQB)
- } /* Method(_SB.INTE._CRS) */
-
- Method(_SRS, 1) {
- /* DBGO("\\_SB\\LNKE\\_CRS\n") */
- CreateWordField(ARG0, 1, IRQM)
-
- /* Use lowest available IRQ */
- FindSetRightBit(IRQM, Local0)
- if (Local0) {
- Decrement(Local0)
- }
- Store(Local0, PINE)
- } /* End Method(_SB.INTE._SRS) */
- } /* End Device(INTE) */
-
- Device(INTF) {
- Name(_HID, EISAID("PNP0C0F"))
- Name(_UID, 6)
-
- Method(_STA, 0) {
- if (PINF) {
- Return(0x0B) /* sata is invisible */
- } else {
- Return(0x09) /* sata is disabled */
- }
- } /* End Method(_SB.INTF._STA) */
-
- Method(_DIS ,0) {
- /* DBGO("\\_SB\\LNKF\\_DIS\n") */
- Store(0, PINF)
- } /* End Method(_SB.INTF._DIS) */
-
- Method(_PRS ,0) {
- /* DBGO("\\_SB\\LNKF\\_PRS\n") */
- Return(PITF)
- } /* Method(_SB.INTF._PRS) */
-
- Method(_CRS ,0) {
- /* DBGO("\\_SB\\LNKF\\_CRS\n") */
- CreateWordField(IRQB, 0x1, IRQN)
- ShiftLeft(1, PINF, IRQN)
- Return(IRQB)
- } /* Method(_SB.INTF._CRS) */
-
- Method(_SRS, 1) {
- /* DBGO("\\_SB\\LNKF\\_CRS\n") */
- CreateWordField(ARG0, 1, IRQM)
-
- /* Use lowest available IRQ */
- FindSetRightBit(IRQM, Local0)
- if (Local0) {
- Decrement(Local0)
- }
- Store(Local0, PINF)
- } /* End Method(_SB.INTF._SRS) */
- } /* End Device(INTF) */
-
- Device(INTG) {
- Name(_HID, EISAID("PNP0C0F"))
- Name(_UID, 7)
-
- Method(_STA, 0) {
- if (PING) {
- Return(0x0B) /* sata is invisible */
- } else {
- Return(0x09) /* sata is disabled */
- }
- } /* End Method(_SB.INTG._STA) */
-
- Method(_DIS ,0) {
- /* DBGO("\\_SB\\LNKG\\_DIS\n") */
- Store(0, PING)
- } /* End Method(_SB.INTG._DIS) */
-
- Method(_PRS ,0) {
- /* DBGO("\\_SB\\LNKG\\_PRS\n") */
- Return(IRQP)
- } /* Method(_SB.INTG._CRS) */
-
- Method(_CRS ,0) {
- /* DBGO("\\_SB\\LNKG\\_CRS\n") */
- CreateWordField(IRQB, 0x1, IRQN)
- ShiftLeft(1, PING, IRQN)
- Return(IRQB)
- } /* Method(_SB.INTG._CRS) */
-
- Method(_SRS, 1) {
- /* DBGO("\\_SB\\LNKG\\_CRS\n") */
- CreateWordField(ARG0, 1, IRQM)
-
- /* Use lowest available IRQ */
- FindSetRightBit(IRQM, Local0)
- if (Local0) {
- Decrement(Local0)
- }
- Store(Local0, PING)
- } /* End Method(_SB.INTG._SRS) */
- } /* End Device(INTG) */
-
- Device(INTH) {
- Name(_HID, EISAID("PNP0C0F"))
- Name(_UID, 8)
-
- Method(_STA, 0) {
- if (PINH) {
- Return(0x0B) /* sata is invisible */
- } else {
- Return(0x09) /* sata is disabled */
- }
- } /* End Method(_SB.INTH._STA) */
-
- Method(_DIS ,0) {
- /* DBGO("\\_SB\\LNKH\\_DIS\n") */
- Store(0, PINH)
- } /* End Method(_SB.INTH._DIS) */
-
- Method(_PRS ,0) {
- /* DBGO("\\_SB\\LNKH\\_PRS\n") */
- Return(IRQP)
- } /* Method(_SB.INTH._CRS) */
-
- Method(_CRS ,0) {
- /* DBGO("\\_SB\\LNKH\\_CRS\n") */
- CreateWordField(IRQB, 0x1, IRQN)
- ShiftLeft(1, PINH, IRQN)
- Return(IRQB)
- } /* Method(_SB.INTH._CRS) */
-
- Method(_SRS, 1) {
- /* DBGO("\\_SB\\LNKH\\_CRS\n") */
- CreateWordField(ARG0, 1, IRQM)
-
- /* Use lowest available IRQ */
- FindSetRightBit(IRQM, Local0)
- if (Local0) {
- Decrement(Local0)
- }
- Store(Local0, PINH)
- } /* End Method(_SB.INTH._SRS) */
- } /* End Device(INTH) */
-
- } /* End Scope(_SB) */
-
-
- /* Supported sleep states: */
- Name(\_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */
-
- If (LAnd(SSFG, 0x01)) {
- Name(\_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */
- }
- If (LAnd(SSFG, 0x02)) {
- Name(\_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */
- }
- If (LAnd(SSFG, 0x04)) {
- Name(\_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */
- }
- If (LAnd(SSFG, 0x08)) {
- Name(\_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */
- }
-
- Name(\_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */
-
- Name(\_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */
- Name(CSMS, 0) /* Current System State */
-
- /* Wake status package */
- Name(WKST,Package(){Zero, Zero})
-
- /*
- * \_PTS - Prepare to Sleep method
- *
- * Entry:
- * Arg0=The value of the sleeping state S1=1, S2=2, etc
- *
- * Exit:
- * -none-
- *
- * The _PTS control method is executed at the beginning of the sleep process
- * for S1-S5. The sleeping value is passed to the _PTS control method. This
- * control method may be executed a relatively long time before entering the
- * sleep state and the OS may abort the operation without notification to
- * the ACPI driver. This method cannot modify the configuration or power
- * state of any device in the system.
- */
- Method(\_PTS, 1) {
- /* DBGO("\\_PTS\n") */
- /* DBGO("From S0 to S") */
- /* DBGO(Arg0) */
- /* DBGO("\n") */
-
- /* Don't allow PCIRST# to reset USB */
- if (LEqual(Arg0,3)){
- Store(0,URRE)
- }
-
- /* Clear sleep SMI status flag and enable sleep SMI trap. */
- /*Store(One, CSSM)
- Store(One, SSEN)*/
-
- /* On older chips, clear PciExpWakeDisEn */
- /*if (LLessEqual(\_SB.SBRI, 0x13)) {
- * Store(0,\_SB.PWDE)
- *}
- */
-
- /* Clear wake status structure. */
- Store(0, Index(WKST,0))
- Store(0, Index(WKST,1))
- \_SB.PCI0.SIOS (Arg0)
- } /* End Method(\_PTS) */
-
- /*
- * The following method results in a "not a valid reserved NameSeg"
- * warning so I have commented it out for the duration. It isn't
- * used, so it could be removed.
- *
- *
- * \_GTS OEM Going To Sleep method
- *
- * Entry:
- * Arg0=The value of the sleeping state S1=1, S2=2
- *
- * Exit:
- * -none-
- *
- * Method(\_GTS, 1) {
- * DBGO("\\_GTS\n")
- * DBGO("From S0 to S")
- * DBGO(Arg0)
- * DBGO("\n")
- * }
- */
-
- /*
- * \_BFS OEM Back From Sleep method
- *
- * Entry:
- * Arg0=The value of the sleeping state S1=1, S2=2
- *
- * Exit:
- * -none-
- */
- Method(\_BFS, 1) {
- /* DBGO("\\_BFS\n") */
- /* DBGO("From S") */
- /* DBGO(Arg0) */
- /* DBGO(" to S0\n") */
- }
-
- /*
- * \_WAK System Wake method
- *
- * Entry:
- * Arg0=The value of the sleeping state S1=1, S2=2
- *
- * Exit:
- * Return package of 2 DWords
- * Dword 1 - Status
- * 0x00000000 wake succeeded
- * 0x00000001 Wake was signaled but failed due to lack of power
- * 0x00000002 Wake was signaled but failed due to thermal condition
- * Dword 2 - Power Supply state
- * if non-zero the effective S-state the power supply entered
- */
- Method(\_WAK, 1) {
- /* DBGO("\\_WAK\n") */
- /* DBGO("From S") */
- /* DBGO(Arg0) */
- /* DBGO(" to S0\n") */
-
- /* Re-enable HPET */
- Store(1,HPDE)
-
- /* Restore PCIRST# so it resets USB */
- if (LEqual(Arg0,3)){
- Store(1,URRE)
- }
-
- /* Arbitrarily clear PciExpWakeStatus */
- Store(PWST, PWST)
-
- /* if(DeRefOf(Index(WKST,0))) {
- * Store(0, Index(WKST,1))
- * } else {
- * Store(Arg0, Index(WKST,1))
- * }
- */
- \_SB.PCI0.SIOW (Arg0)
- Return(WKST)
- } /* End Method(\_WAK) */
-
- Scope(\_GPE) { /* Start Scope GPE */
- /* General event 0 */
- /* Method(_L00) {
- * DBGO("\\_GPE\\_L00\n")
- * }
- */
-
- /* General event 1 */
- /* Method(_L01) {
- * DBGO("\\_GPE\\_L00\n")
- * }
- */
-
- /* General event 2 */
- /* Method(_L02) {
- * DBGO("\\_GPE\\_L00\n")
- * }
- */
-
- /* General event 3 */
- Method(_L03) {
- /* DBGO("\\_GPE\\_L00\n") */
- Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
- }
-
- /* General event 4 */
- /* Method(_L04) {
- * DBGO("\\_GPE\\_L00\n")
- * }
- */
-
- /* General event 5 */
- /* Method(_L05) {
- * DBGO("\\_GPE\\_L00\n")
- * }
- */
-
- /* General event 6 - Used for GPM6, moved to USB.asl */
- /* Method(_L06) {
- * DBGO("\\_GPE\\_L00\n")
- * }
- */
-
- /* General event 7 - Used for GPM7, moved to USB.asl */
- /* Method(_L07) {
- * DBGO("\\_GPE\\_L07\n")
- * }
- */
-
- /* Legacy PM event */
- Method(_L08) {
- /* DBGO("\\_GPE\\_L08\n") */
- }
-
- /* Temp warning (TWarn) event */
- Method(_L09) {
- /* DBGO("\\_GPE\\_L09\n") */
- Notify (\_TZ.TZ00, 0x80)
- }
-
- /* Reserved */
- /* Method(_L0A) {
- * DBGO("\\_GPE\\_L0A\n")
- * }
- */
-
- /* USB controller PME# */
- Method(_L0B) {
- /* DBGO("\\_GPE\\_L0B\n") */
- Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
- }
-
- /* AC97 controller PME# */
- /* Method(_L0C) {
- * DBGO("\\_GPE\\_L0C\n")
- * }
- */
-
- /* OtherTherm PME# */
- /* Method(_L0D) {
- * DBGO("\\_GPE\\_L0D\n")
- * }
- */
-
- /* GPM9 SCI event - Moved to USB.asl */
- /* Method(_L0E) {
- * DBGO("\\_GPE\\_L0E\n")
- * }
- */
-
- /* PCIe HotPlug event */
- /* Method(_L0F) {
- * DBGO("\\_GPE\\_L0F\n")
- * }
- */
-
- /* ExtEvent0 SCI event */
- Method(_L10) {
- /* DBGO("\\_GPE\\_L10\n") */
- }
-
-
- /* ExtEvent1 SCI event */
- Method(_L11) {
- /* DBGO("\\_GPE\\_L11\n") */
- }
-
- /* PCIe PME# event */
- /* Method(_L12) {
- * DBGO("\\_GPE\\_L12\n")
- * }
- */
-
- /* GPM0 SCI event - Moved to USB.asl */
- /* Method(_L13) {
- * DBGO("\\_GPE\\_L13\n")
- * }
- */
-
- /* GPM1 SCI event - Moved to USB.asl */
- /* Method(_L14) {
- * DBGO("\\_GPE\\_L14\n")
- * }
- */
-
- /* GPM2 SCI event - Moved to USB.asl */
- /* Method(_L15) {
- * DBGO("\\_GPE\\_L15\n")
- * }
- */
-
- /* GPM3 SCI event - Moved to USB.asl */
- /* Method(_L16) {
- * DBGO("\\_GPE\\_L16\n")
- * }
- */
-
- /* GPM8 SCI event - Moved to USB.asl */
- /* Method(_L17) {
- * DBGO("\\_GPE\\_L17\n")
- * }
- */
-
- /* GPIO0 or GEvent8 event */
- Method(_L18) {
- /* DBGO("\\_GPE\\_L18\n") */
- Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
- }
-
- /* GPM4 SCI event - Moved to USB.asl */
- /* Method(_L19) {
- * DBGO("\\_GPE\\_L19\n")
- * }
- */
-
- /* GPM5 SCI event - Moved to USB.asl */
- /* Method(_L1A) {
- * DBGO("\\_GPE\\_L1A\n")
- * }
- */
-
- /* Azalia SCI event */
- Method(_L1B) {
- /* DBGO("\\_GPE\\_L1B\n") */
- Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
- Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
- }
-
- /* GPM6 SCI event - Reassigned to _L06 */
- /* Method(_L1C) {
- * DBGO("\\_GPE\\_L1C\n")
- * }
- */
-
- /* GPM7 SCI event - Reassigned to _L07 */
- /* Method(_L1D) {
- * DBGO("\\_GPE\\_L1D\n")
- * }
- */
-
- /* GPIO2 or GPIO66 SCI event */
- /* Method(_L1E) {
- * DBGO("\\_GPE\\_L1E\n")
- * }
- */
-
- /* SATA SCI event - Moved to sata.asl */
- /* Method(_L1F) {
- * DBGO("\\_GPE\\_L1F\n")
- * }
- */
-
- } /* End Scope GPE */
-
- #include "acpi/usb.asl"
+#include "acpi/event.asl"
+#include "acpi/routing.asl"
+#include "acpi/usb.asl"
/* South Bridge */
- Scope(\_SB) { /* Start \_SB scope */
- #include "../../../arch/x86/acpi/globutil.asl" /* global utility methods expected within the \_SB scope */
+ Scope(\_SB)
+ {
+ /* Start \_SB scope */
+
+#include "acpi/globutil.asl"
+ Device(PWRB) { /* Start Power button device */
+ Name(_HID, EISAID("PNP0C0C"))
+ Name(_UID, 0xAA)
+ Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */
+ Name(_STA, 0x0B) /* sata is invisible */
+ }
/* _SB.PCI0 */
/* Note: Only need HID on Primary Bus */
- Device(PCI0) {
+ Device(PCI0)
+ {
+ External (MMIO)
External (TOM1)
- External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */
+ External (TOM2)
+
Name(_HID, EISAID("PNP0A03"))
Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */
+
Method(_BBN, 0) { /* Bus number = 0 */
Return(0)
- }
+ }
+
Method(_STA, 0) {
/* DBGO("\\_SB\\PCI0\\_STA\n") */
Return(0x0B) /* Status is visible */
}
+
+ Device (MEMR)
+ {
+ Name (_HID, EisaId ("PNP0C02"))
+ Name (MEM1, ResourceTemplate ()
+ {
+ Memory32Fixed (ReadWrite,
+ 0x00000000, // Address Base
+ 0x00000000, // Address Length
+ _Y1A)
+ Memory32Fixed (ReadWrite,
+ 0x00000000, // Address Base
+ 0x00000000, // Address Length
+ _Y1B)
+ })
+ Method (_CRS, 0, NotSerialized)
+ {
+ CreateDWordField (MEM1, \_SB.PCI0.MEMR._Y1A._BAS, MB01)
+ CreateDWordField (MEM1, \_SB.PCI0.MEMR._Y1A._LEN, ML01)
+ CreateDWordField (MEM1, \_SB.PCI0.MEMR._Y1B._BAS, MB02)
+ CreateDWordField (MEM1, \_SB.PCI0.MEMR._Y1B._LEN, ML02)
+ If (PCIF)
+ {
+ Store (0xFEC00000, MB01)
+ Store (0xFEE00000, MB02)
+ Store (0x1000, ML01)
+ Store (0x1000, ML02)
+ }
+
+ Return (MEM1)
+ }
+ }
Method(_PRT,0) {
- If(PMOD){ Return(APR0) } /* APIC mode */
+ If(PCIF){ Return(APR0) } /* APIC mode */
Return (PR0) /* PIC Mode */
} /* end _PRT */
-
+
+ OperationRegion (BAR1, PCI_Config, 0x14, 0x04)
+ Field (BAR1, ByteAcc, NoLock, Preserve)
+ {
+ Z009, 32
+ }
+
/* Describe the Northbridge devices */
Device(AMRT) {
Name(_ADR, 0x00000000)
} /* end AMRT */
-
+
/* The internal GFX bridge */
Device(AGPB) {
Name(_ADR, 0x00010000)
Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- Return (APR1)
- }
+ Method(_PRT,0) { Return (APR1) }
+
+ Device (VGA)
+ {
+ Name (_ADR, 0x00050000)
+ Method (_DOS, 1)
+ {
+ /* Windows 2000 and Windows XP call _DOS to enable/disable
+ * Display Output Switching during init and while a switch
+ * is already active
+ */
+ Store (And(Arg0, 7), DSEN)
+ }
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0F)
+ }
+ }
} /* end AGPB */
/* The external GFX bridge */
@@ -1164,18 +473,18 @@
Name(_ADR, 0x00020000)
Name(_PRW, Package() {0x18, 4})
Method(_PRT,0) {
- If(PMOD){ Return(APS2) } /* APIC mode */
+ If(PCIF){ Return(APS2) } /* APIC mode */
Return (PS2) /* PIC Mode */
} /* end _PRT */
} /* end PBR2 */
- /* Dev3 is also an external GFX bridge, not used in Herring */
+ /* Dev3 is also an external GFX bridge */
Device(PBR4) {
Name(_ADR, 0x00040000)
Name(_PRW, Package() {0x18, 4})
Method(_PRT,0) {
- If(PMOD){ Return(APS4) } /* APIC mode */
+ If(PCIF){ Return(APS4) } /* APIC mode */
Return (PS4) /* PIC Mode */
} /* end _PRT */
} /* end PBR4 */
@@ -1184,8 +493,8 @@
Name(_ADR, 0x00050000)
Name(_PRW, Package() {0x18, 4})
Method(_PRT,0) {
- If(PMOD){ Return(APS5) } /* APIC mode */
- Return (PS5) /* PIC Mode */
+ If(PCIF){ Return(APS5) } /* APIC mode */
+ Return (PS5) /* PIC Mode */
} /* end _PRT */
} /* end PBR5 */
@@ -1193,7 +502,7 @@
Name(_ADR, 0x00060000)
Name(_PRW, Package() {0x18, 4})
Method(_PRT,0) {
- If(PMOD){ Return(APS6) } /* APIC mode */
+ If(PCIF){ Return(APS6) } /* APIC mode */
Return (PS6) /* PIC Mode */
} /* end _PRT */
} /* end PBR6 */
@@ -1203,27 +512,26 @@
Name(_ADR, 0x00070000)
Name(_PRW, Package() {0x18, 4})
Method(_PRT,0) {
- If(PMOD){ Return(APS7) } /* APIC mode */
- Return (PS7) /* PIC Mode */
+ If(PCIF){ Return(APS7) } /* APIC mode */
+ Return (PS7) /* PIC Mode */
} /* end _PRT */
} /* end PBR7 */
-
- /* PCI slot 1, 2, 3 */
+ /* PCI slot 1 */
Device(PIBR) {
Name(_ADR, 0x00140004)
- Name(_PRW, Package() {0x18, 4})
-
+ Name(_PRW, Package() {4, 5}) // Phoenix doeas it so
Method(_PRT, 0) {
- Return (PCIB)
+ If(PCIF){ Return(AP2P) } /* APIC Mode */
+ Return (PCIB) /* PIC Mode */
}
}
/* Describe the Southbridge devices */
- Device(STCR) {
+ Device(SATA) {
Name(_ADR, 0x00120000)
- #include "acpi/sata.asl"
- } /* end STCR */
+#include "acpi/sata.asl"
+ } /* end SATA */
Device(UOH1) {
Name(_ADR, 0x00130000)
@@ -1292,7 +600,7 @@
}
Method(_INI) {
- If(LEqual(OSTP,3)){ /* If we are running Linux */
+ If(LEqual(LINX,1)){ /* If we are running Linux */
Store(zero, NSEN)
Store(one, NSDO)
Store(one, NSDI)
@@ -1300,18 +608,350 @@
}
} /* end AZHD */
- Device(LIBR) {
- Name(_ADR, 0x00140003)
- /* Method(_INI) {
- * DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n")
- } */ /* End Method(_SB.SBRDG._INI) */
+ Device(LPC0)
+ {
+ Name (_ADR, 0x00140003)
+ Mutex (PSMX, 0x00)
+
+ /* PIC IRQ mapping registers, C00h-C01h */
+ OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002)
+ Field(PRQM, ByteAcc, NoLock, Preserve) {
+ PRQI, 0x00000008,
+ PRQD, 0x00000008, /* Offset: 1h */
+ }
+
+ IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) {
+ PINA, 0x00000008, /* Index 0 */
+ PINB, 0x00000008, /* Index 1 */
+ PINC, 0x00000008, /* Index 2 */
+ PIND, 0x00000008, /* Index 3 */
+ SINT, 0x00000008, /* Index 4 */
+ Offset(0x09),
+ PINE, 0x00000008, /* Index 9 */
+ PINF, 0x00000008, /* Index A */
+ PING, 0x00000008, /* Index B */
+ PINH, 0x00000008, /* Index C */
+ }
+
+ Method(CIRQ, 0x00, NotSerialized)
+ {
+ Store(0, PINA)
+ Store(0, PINB)
+ Store(0, PINC)
+ Store(0, PIND)
+ Store(0, SINT)
+ Store(0, PINE)
+ Store(0, PINF)
+ Store(0, PING)
+ Store(0, PINH)
+ }
+
+ Name(IRQB, ResourceTemplate(){
+ IRQ(Level,ActiveLow,Shared){10,11}
+ })
+
+ Name(IRQP, ResourceTemplate(){
+ IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7}
+ })
+
+ Name(PITF, ResourceTemplate(){
+ IRQ(Level,ActiveLow,Exclusive){9}
+ })
+
+ Device(INTA) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 1)
+
+ Method(_STA, 0) {
+ if (PINA) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTA._STA) */
+
+ Method(_DIS ,0) {
+ Store(0, PINA)
+ } /* End Method(_SB.INTA._DIS) */
+
+ Method(_PRS ,0) {
+ Return(IRQB) // Return(IRQP)
+ } /* Method(_SB.INTA._PRS) */
+
+ Method(_CRS ,0) {
+ Store (IRQB, Local0) //
+ CreateWordField(Local0, 0x1, IRQ0)
+ ShiftLeft(1, PINA, IRQ0)
+ Return(Local0)
+ } /* Method(_SB.INTA._CRS) */
+ Method(_SRS, 1) {
+ CreateWordField(ARG0, 1, IRQ0)
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQ0, Local0)
+ Decrement (Local0)
+ Store(Local0, PINA)
+ } /* End Method(_SB.INTA._SRS) */
+ } /* End Device(INTA) */
+
+ Device(INTB) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 2)
+
+ Method(_STA, 0) {
+ if (PINB) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTB._STA) */
+
+ Method(_DIS ,0) {
+ Store(0, PINB)
+ } /* End Method(_SB.INTB._DIS) */
+
+ Method(_PRS ,0) {
+ Return(IRQB) // Return(IRQP)
+ } /* Method(_SB.INTB._PRS) */
+
+ Method(_CRS ,0) {
+ Store (IRQB, Local0) // {10,11}
+ CreateWordField(Local0, 0x1, IRQ0)
+ ShiftLeft(1, PINB, IRQ0)
+ Return(Local0)
+ } /* Method(_SB.INTB._CRS) */
+
+ Method(_SRS, 1) {
+ CreateWordField(ARG0, 1, IRQ0)
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQ0, Local0)
+ Decrement(Local0)
+ Store(Local0, PINB)
+ } /* End Method(_SB.INTB._SRS) */
+ } /* End Device(INTB) */
+
+ Device(INTC) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 3)
+
+ Method(_STA, 0) {
+ if (PINC) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTC._STA) */
+
+ Method(_DIS ,0) {
+ Store(0, PINC)
+ } /* End Method(_SB.INTC._DIS) */
+
+ Method(_PRS ,0) {
+ Return(IRQB) // Return(IRQP)
+ } /* Method(_SB.INTC._PRS) */
+
+ Method(_CRS ,0) {
+ Store (IRQB, Local0) // {10,11}
+ CreateWordField(Local0, 0x1, IRQ0)
+ ShiftLeft(1, PINC, IRQ0)
+ Return(Local0)
+ } /* Method(_SB.INTC._CRS) */
+
+ Method(_SRS, 1) {
+ CreateWordField(ARG0, 1, IRQ0)
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQ0, Local0)
+ Decrement(Local0)
+ Store(Local0, PINC)
+ } /* End Method(_SB.INTC._SRS) */
+ } /* End Device(INTC) */
+
+ Device(INTD) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 4)
+
+ Method(_STA, 0) {
+ if (PIND) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTD._STA) */
+
+ Method(_DIS ,0) {
+ Store(0, PIND)
+ } /* End Method(_SB.INTD._DIS) */
+
+ Method(_PRS ,0) {
+ Return(IRQB) // Return(IRQP)
+ } /* Method(_SB.INTD._PRS) */
+
+ Method(_CRS ,0) {
+ Store (IRQB, Local0) // {10,11}
+ CreateWordField(Local0, 0x1, IRQ0)
+ ShiftLeft(1, PIND, IRQ0)
+ Return(Local0)
+ } /* Method(_SB.INTD._CRS) */
+
+ Method(_SRS, 1) {
+ CreateWordField(ARG0, 1, IRQ0)
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQ0, Local0)
+ Decrement(Local0)
+ Store(Local0, PIND)
+ } /* End Method(_SB.INTD._SRS) */
+ } /* End Device(INTD) */
+
+ Device(INTE) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 5)
+
+ Method(_STA, 0) {
+ if (PINE) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTE._STA) */
+
+ Method(_DIS ,0) {
+ Store(0, PINE)
+ } /* End Method(_SB.INTE._DIS) */
+
+ Method(_PRS ,0) {
+ Return(IRQB) // Return(IRQP)
+ }
+
+ Method(_CRS ,0) {
+ Store (IRQB, Local0) // {10,11}
+ CreateWordField(Local0, 0x1, IRQ0)
+ ShiftLeft(1, PINE, IRQ0)
+ Return(Local0)
+ } /* Method(_SB.INTE._CRS) */
+
+ Method(_SRS, 1) {
+ CreateWordField(ARG0, 1, IRQ0)
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQ0, Local0)
+ Decrement(Local0)
+ Store(Local0, PINE)
+ } /* End Method(_SB.INTE._SRS) */
+ } /* End Device(INTE) */
+
+ Device(INTF) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 6)
+
+ Method(_STA, 0) {
+ if (PINF) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTF._STA) */
+
+ Method(_DIS ,0) {
+ Store(0, PINF)
+ } /* End Method(_SB.INTF._DIS) */
+
+ Method(_PRS ,0) {
+ Return(IRQB) // Return(PITF)
+ } /* Method(_SB.INTF._PRS) */
+
+ Method(_CRS ,0) {
+ Store (IRQB, Local0) // {10,11}
+ CreateWordField(Local0, 0x1, IRQ0)
+ ShiftLeft(1, PINF, IRQ0)
+ Return(Local0)
+ } /* Method(_SB.INTF._CRS) */
+
+ Method(_SRS, 1) {
+ CreateWordField(ARG0, 1, IRQ0)
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQ0, Local0)
+ Decrement(Local0)
+ Store(Local0, PINF)
+ } /* End Method(_SB.INTF._SRS) */
+ } /* End Device(INTF) */
+
+ Device(INTG) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 7)
+
+ Method(_STA, 0) {
+ if (PING) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTG._STA) */
+
+ Method(_DIS ,0) {
+ Store(0, PING)
+ } /* End Method(_SB.INTG._DIS) */
+
+ Method(_PRS ,0) {
+ Return(IRQB) // Return(IRQP)
+ } /* Method(_SB.INTG._CRS) */
+
+ Method(_CRS ,0) {
+ Store (IRQB, Local0) // {10,11}
+ CreateWordField(Local0, 0x1, IRQ0)
+ ShiftLeft(1, PING, IRQ0)
+ Return(Local0)
+ } /* Method(_SB.INTG._CRS) */
+
+ Method(_SRS, 1) {
+ CreateWordField(ARG0, 1, IRQ0)
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQ0, Local0)
+ Decrement(Local0)
+ Store(Local0, PING)
+ } /* End Method(_SB.INTG._SRS) */
+ } /* End Device(INTG) */
+
+ Device(INTH) {
+ Name(_HID, EISAID("PNP0C0F"))
+ Name(_UID, 8)
+
+ Method(_STA, 0) {
+ if (PINH) {
+ Return(0x0B) /* sata is invisible */
+ } else {
+ Return(0x09) /* sata is disabled */
+ }
+ } /* End Method(_SB.INTH._STA) */
+
+ Method(_DIS ,0) {
+ Store(0, PINH)
+ } /* End Method(_SB.INTH._DIS) */
+
+ Method(_PRS ,0) {
+ Return(IRQB) // Return(IRQP)
+ } /* Method(_SB.INTH._CRS) */
+
+ Method(_CRS ,0) {
+ Store (IRQB, Local0) // {10,11}
+ CreateWordField(Local0, 0x1, IRQ0)
+ ShiftLeft(1, PINH, IRQ0)
+ Return(Local0)
+ } /* Method(_SB.INTH._CRS) */
+
+ Method(_SRS, 1) {
+ CreateWordField(ARG0, 1, IRQ0)
+ /* Use lowest available IRQ */
+ FindSetRightBit(IRQ0, Local0)
+ Decrement(Local0)
+ Store(Local0, PINH)
+ } /* End Method(_SB.INTH._SRS) */
+ } /* End Device(INTH) */
+
/* Real Time Clock Device */
Device(RTC0) {
- Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */
+ Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible)*/
Name(_CRS, ResourceTemplate() {
- IRQNoFlags(){8}
- IO(Decode16,0x0070, 0x0070, 0, 2)
+ IRQ (Edge, ActiveHigh, Exclusive, ) {8}
+ IO(Decode16,0x0070, 0x0070, 1, 2)
/* IO(Decode16,0x0070, 0x0070, 0, 4) */
})
} /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */
@@ -1319,8 +959,8 @@
Device(TMR) { /* Timer */
Name(_HID,EISAID("PNP0100")) /* System Timer */
Name(_CRS, ResourceTemplate() {
- IRQNoFlags(){0}
- IO(Decode16, 0x0040, 0x0040, 0, 4)
+ IRQ (Edge, ActiveHigh, Exclusive, ) {0}
+ IO(Decode16, 0x0040, 0x0040, 1, 4)
/* IO(Decode16, 0x0048, 0x0048, 0, 4) */
})
} /* End Device(_SB.PCI0.LpcIsaBr.TMR) */
@@ -1328,15 +968,15 @@
Device(SPKR) { /* Speaker */
Name(_HID,EISAID("PNP0800")) /* AT style speaker */
Name(_CRS, ResourceTemplate() {
- IO(Decode16, 0x0061, 0x0061, 0, 1)
+ IO(Decode16, 0x0061, 0x0061, 1, 1)
})
} /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */
Device(PIC) {
Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */
Name(_CRS, ResourceTemplate() {
- IRQNoFlags(){2}
- IO(Decode16,0x0020, 0x0020, 0, 2)
+ IRQ (Edge, ActiveHigh, Exclusive, ) {2}
+ IO(Decode16,0x0020, 0x0020, 1, 2)
IO(Decode16,0x00A0, 0x00A0, 0, 2)
/* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */
/* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */
@@ -1346,7 +986,7 @@
Device(MAD) { /* 8257 DMA */
Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */
Name(_CRS, ResourceTemplate() {
- DMA(Compatibility,BusMaster,Transfer8){4}
+ DMA(Compatibility,NotBusMaster,Transfer8_16){4}
IO(Decode16, 0x0000, 0x0000, 0x10, 0x10)
IO(Decode16, 0x0081, 0x0081, 0x01, 0x03)
IO(Decode16, 0x0087, 0x0087, 0x01, 0x01)
@@ -1359,12 +999,12 @@
Device(COPR) {
Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */
Name(_CRS, ResourceTemplate() {
- IO(Decode16, 0x00F0, 0x00F0, 0, 0x10)
- IRQNoFlags(){13}
+ IO(Decode16, 0x00F0, 0x00F0, 1, 0x10)
+ IRQ (Edge, ActiveHigh, Exclusive, ) {13}
})
} /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
- Device(HPTM) {
+ Device(HPET) {
Name(_HID,EISAID("PNP0103"))
Name(CRS,ResourceTemplate() {
Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */
@@ -1377,19 +1017,55 @@
Store(HPBA, HPBA)
Return(CRS)
}
- } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
- } /* end LIBR */
-
- Device(HPBR) {
- Name(_ADR, 0x00140004)
- } /* end HostPciBr */
+ }
+
+ Device (KBC0)
+ {
+ Name (_HID, EisaId ("PNP0303"))
+ Name (_CRS, ResourceTemplate ()
+ {
+ IO (Decode16,
+ 0x0060, // Range Minimum
+ 0x0060, // Range Maximum
+ 0x01, // Alignment
+ 0x01, // Length
+ )
+ IO (Decode16,
+ 0x0064, // Range Minimum
+ 0x0064, // Range Maximum
+ 0x01, // Alignment
+ 0x01, // Length
+ )
+ IRQ (Edge, ActiveHigh, Exclusive, ) {1}
+ })
+ }
+
+ Device (MSE0)
+ {
+ Name (_HID, EisaId ("PNP0F13"))
+ Name (_CRS, ResourceTemplate ()
+ {
+ IRQ (Edge, ActiveHigh, Exclusive, ) {12}
+ })
+ }
+ } /* end LPC0 */
Device(ACAD) {
Name(_ADR, 0x00140005)
+ Name (_PRW, Package (0x02)
+ {
+ 0x0C,
+ 0x04
+ })
} /* end Ac97audio */
Device(ACMD) {
Name(_ADR, 0x00140006)
+ Name (_PRW, Package (0x02)
+ {
+ 0x0C,
+ 0x04
+ })
} /* end Ac97modem */
/* ITE IT8712F Support */
@@ -1435,7 +1111,7 @@
* Keyboard PME is routed to SB600 Gevent3. We can wake
* up the system by pressing the key.
*/
- Method (SIOS, 1)
+ Method (SIOS, 1)
{
/* We only enable KBD PME for S5. */
If (LLess (Arg0, 0x05))
@@ -1468,6 +1144,7 @@
XPNP()
}
+/* ############################################################################################### */
Name(CRES, ResourceTemplate() {
IO(Decode16, 0x0CF8, 0x0CF8, 1, 8)
@@ -1487,133 +1164,39 @@
0xF300 /* length */
)
- Memory32Fixed(READWRITE, 0, 0xA0000, BSMM)
Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */
Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */
Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */
/* DRAM Memory from 1MB to TopMem */
- Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */
-
- /* BIOS space just below 4GB */
- DWORDMemory(
- ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
- 0x00, /* Granularity */
- 0x00000000, /* Min */
- 0x00000000, /* Max */
- 0x00000000, /* Translation */
- 0x00000001, /* Max-Min, RLEN */
- ,,
- PCBM
- )
-
- /* DRAM memory from 4GB to TopMem2 */
- QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
- 0x00000000, /* Granularity */
- 0x00000000, /* Min */
- 0x00000000, /* Max */
- 0x00000000, /* Translation */
- 0x00000001, /* Max-Min, RLEN */
- ,,
- DMHI
- )
-
- /* BIOS space just below 16EB */
- QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
- 0x00000000, /* Granularity */
- 0x00000000, /* Min */
- 0x00000000, /* Max */
- 0x00000000, /* Translation */
- 0x00000001, /* Max-Min, RLEN */
- ,,
- PEBM
- )
-
+ DWORDMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 0, 0, 0, 0x00, 1, ,, EMM2)
+ WORDIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x00, 0x0D00, 0xffff, 0x00, 0xf300)
}) /* End Name(_SB.PCI0.CRES) */
Method(_CRS, 0) {
+
/* DBGO("\\_SB\\PCI0\\_CRS\n") */
CreateDWordField(CRES, ^EMM1._BAS, EM1B)
CreateDWordField(CRES, ^EMM1._LEN, EM1L)
- CreateDWordField(CRES, ^DMLO._BAS, DMLB)
- CreateDWordField(CRES, ^DMLO._LEN, DMLL)
- CreateDWordField(CRES, ^PCBM._MIN, PBMB)
- CreateDWordField(CRES, ^PCBM._LEN, PBML)
-
- CreateQWordField(CRES, ^DMHI._MIN, DMHB)
- CreateQWordField(CRES, ^DMHI._LEN, DMHL)
- CreateQWordField(CRES, ^PEBM._MIN, EBMB)
- CreateQWordField(CRES, ^PEBM._LEN, EBML)
+
+ CreateDWordField(CRES, ^EMM2._MIN, EM2B)
+ CreateDWordField(CRES, ^EMM2._MAX, EM2E)
+ CreateDWordField(CRES, ^EMM2._LEN, EM2L)
+
+ Store(TOM1, EM2B)
+ Subtract(IOLM, 1, EM2E)
+ Subtract(IOLM, TOM1, EM2L)
If(LGreater(LOMH, 0xC0000)){
Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */
Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */
}
- /* Set size of memory from 1MB to TopMem */
- Subtract(TOM1, 0x100000, DMLL)
-
- /*
- * If(LNotEqual(TOM2, 0x00000000)){
- * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2
- * ShiftLeft(TOM2, 20, Local0)
- * Subtract(Local0, 0x100000000, DMHL)
- * }
- */
-
- /* If there is no memory above 4GB, put the BIOS just below 4GB */
- If(LEqual(TOM2, 0x00000000)){
- Store(PBAD,PBMB) /* Reserve the "BIOS" space */
- Store(PBLN,PBML)
- }
- Else { /* Otherwise, put the BIOS just below 16EB */
- ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */
- Store(PBLN,EBML)
- }
-
Return(CRES) /* note to change the Name buffer */
- } /* end of Method(_SB.PCI0._CRS) */
-
- /*
- *
- * FIRST METHOD CALLED UPON BOOT
- *
- * 1. If debugging, print current OS and ACPI interpreter.
- * 2. Get PCI Interrupt routing from ACPI VSM, this
- * value is based on user choice in BIOS setup.
- */
- Method(_INI, 0) {
- /* DBGO("\\_SB\\_INI\n") */
- /* DBGO(" DSDT.ASL code from ") */
- /* DBGO(__DATE__) */
- /* DBGO(" ") */
- /* DBGO(__TIME__) */
- /* DBGO("\n Sleep states supported: ") */
- /* DBGO("\n") */
- /* DBGO(" \\_OS=") */
- /* DBGO(\_OS) */
- /* DBGO("\n \\_REV=") */
- /* DBGO(\_REV) */
- /* DBGO("\n") */
-
- /* Determine the OS we're running on */
- CkOT()
-
- /* On older chips, clear PciExpWakeDisEn */
- /*if (LLessEqual(\SBRI, 0x13)) {
- * Store(0,\PWDE)
- * }
- */
- } /* End Method(_SB._INI) */
+ }
+/* ########################################################################################## */
} /* End Device(PCI0) */
-
- Device(PWRB) { /* Start Power button device */
- Name(_HID, EISAID("PNP0C0C"))
- Name(_UID, 0xAA)
- Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */
- Name(_STA, 0x0B) /* sata is invisible */
- }
} /* End \_SB scope */
Scope(\_SI) {
@@ -1626,7 +1209,7 @@
} /* End Scope SI */
Mutex (SBX0, 0x00)
- OperationRegion (SMB0, SystemIO, 0xB00, 0x0C)
+ OperationRegion (SMB0, SystemIO, 0xB00, 0x10) // 0x0C replace by 0x10
Field (SMB0, ByteAcc, NoLock, Preserve) {
HSTS, 8, /* SMBUS status */
SSTS, 8, /* SMBUS slave status */
@@ -1639,7 +1222,11 @@
SCNT, 8, /* SMBUS slave control */
SCMD, 8, /* SMBUS shaow cmd */
SEVT, 8, /* SMBUS slave event */
- SDAT, 8 /* SMBUS slave data */
+ SDAT, 8, /* SMBUS slave data */
+ SMK1, 8,
+ SLMC, 8,
+ RADD, 8,
+ SADD, 8
}
Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */
@@ -1718,75 +1305,5 @@
Return (Local0)
}
-
- /* THERMAL */
- Scope(\_TZ) {
- Name (KELV, 2732)
- Name (THOT, 800)
- Name (TCRT, 850)
-
- ThermalZone(TZ00) {
- Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */
- /* DBGO("\\_TZ\\TZ00\\_AC0\n") */
- Return(Add(0, 2730))
- }
- Method(_AL0,0) { /* Returns package of cooling device to turn on */
- /* DBGO("\\_TZ\\TZ00\\_AL0\n") */
- Return(Package() {\_TZ.TZ00.FAN0})
- }
- Device (FAN0) {
- Name(_HID, EISAID("PNP0C0B"))
- Name(_PR0, Package() {PFN0})
- }
-
- PowerResource(PFN0,0,0) {
- Method(_STA) {
- Store(0xF,Local0)
- Return(Local0)
- }
- Method(_ON) {
- /* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */
- }
- Method(_OFF) {
- /* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */
- }
- }
-
- Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */
- /* DBGO("\\_TZ\\TZ00\\_HOT\n") */
- Return (Add (THOT, KELV))
- }
- Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */
- /* DBGO("\\_TZ\\TZ00\\_CRT\n") */
- Return (Add (TCRT, KELV))
- }
- Method(_TMP,0) { /* return current temp of this zone */
- Store (SMBR (0x07, 0x4C,, 0x00), Local0)
- If (LGreater (Local0, 0x10)) {
- Store (Local0, Local1)
- }
- Else {
- Add (Local0, THOT, Local0)
- Return (Add (400, KELV))
- }
-
- Store (SMBR (0x07, 0x4C, 0x01), Local0)
- /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */
- /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */
- If (LGreater (Local0, 0x10)) {
- If (LGreater (Local0, Local1)) {
- Store (Local0, Local1)
- }
-
- Multiply (Local1, 10, Local1)
- Return (Add (Local1, KELV))
- }
- Else {
- Add (Local0, THOT, Local0)
- Return (Add (400 , KELV))
- }
- } /* end of _TMP */
- } /* end of TZ00 */
- }
+#include "acpi/thermal.asl"
}
-/* End of ASL file */
Modified: trunk/src/mainboard/siemens/sitemp_g1p1/fadt.c
==============================================================================
--- trunk/src/mainboard/amd/dbm690t/fadt.c Tue May 10 23:53:13 2011 (r6565)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/fadt.c Wed May 11 09:47:43 2011 (r6567)
@@ -26,7 +26,7 @@
#include <arch/acpi.h>
#include <arch/io.h>
#include <device/device.h>
-#include "southbridge/amd/sb600/sb600.h"
+#include <../southbridge/amd/sb600/sb600.h>
/*extern*/ u16 pm_base = 0x800;
/* pm_base should be set in sb acpi */
@@ -56,7 +56,8 @@
memcpy(header->oem_id, OEM_ID, 6);
memcpy(header->oem_table_id, "COREBOOT", 8);
memcpy(header->asl_compiler_id, ASLC, 4);
- header->asl_compiler_revision = 0;
+ header->oem_revision = 0x20101005;
+ header->asl_compiler_revision = 3;
fadt->firmware_ctrl = (u32) facs;
fadt->dsdt = (u32) dsdt;
Modified: trunk/src/mainboard/siemens/sitemp_g1p1/get_bus_conf.c
==============================================================================
--- trunk/src/mainboard/amd/dbm690t/get_bus_conf.c Tue May 10 23:53:13 2011 (r6565)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/get_bus_conf.c Wed May 11 09:47:43 2011 (r6567)
@@ -32,6 +32,7 @@
/* Global variables for MB layouts and these will be shared by irqtable mptable
* and acpi_tables busnum is default.
*/
+u8 bus_isa;
u8 bus_rs690[8];
u8 bus_sb600[2];
u32 apicid_sb600;
@@ -53,6 +54,8 @@
0x20202020,
};
+u32 bus_type[256];
+
u32 sbdn_rs690;
u32 sbdn_sb600;
@@ -64,7 +67,7 @@
{
u32 apicid_base;
device_t dev;
- int i;
+ int i, j;
if (get_bus_conf_done == 1)
return; /* do it only once */
@@ -89,13 +92,25 @@
bus_rs690[i] = 0;
}
+ for (i = 0; i < 256; i++) {
+ bus_type[i] = 0; /* default ISA bus. */
+ }
+
+ bus_type[0] = 1; /* pci */
+
bus_rs690[0] = (sysconf.pci1234[0] >> 16) & 0xff;
bus_sb600[0] = bus_rs690[0];
+ bus_type[bus_rs690[0]] = 1;
+
/* sb600 */
dev = dev_find_slot(bus_sb600[0], PCI_DEVFN(sbdn_sb600 + 0x14, 4));
if (dev) {
bus_sb600[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_isa++;
+ for (j = bus_sb600[1]; j < bus_isa; j++)
+ bus_type[j] = 1;
}
/* rs690 */
@@ -103,10 +118,16 @@
dev = dev_find_slot(bus_rs690[0], PCI_DEVFN(sbdn_rs690 + i, 0));
if (dev) {
bus_rs690[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ if(255 != bus_rs690[i]) {
+ bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_isa++;
+ bus_type[bus_rs690[i]] = 1; /* PCI bus. */
+ }
}
}
/* I/O APICs: APIC ID Version State Address */
+ bus_isa = 10;
#if CONFIG_LOGICAL_CPUS==1
apicid_base = get_apicid_base(1);
#else
Added: trunk/src/mainboard/siemens/sitemp_g1p1/int15_func.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/int15_func.c Wed May 11 09:47:43 2011 (r6567)
@@ -0,0 +1,111 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2009 coresystems GmbH
+ * Copyright (C) 2009 Libra Li <libra.li at technexion.com>
+ * Copyright (C) 2010 Siemens AG, Inc.
+ * (Written by Josef Kellermann <joseph.kellermann at heitec.de> for Siemens AG, Inc.)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <stdlib.h>
+#include <console/console.h>
+#include <arch/interrupt.h>
+#include "int15_func.h"
+
+int sbios_INT15_handler(struct eregs *);
+/*extern*/ unsigned long vgainfo_addr;
+
+static INT15_function_extensions __int15_func;
+
+/* System BIOS int15 function */
+int sbios_INT15_handler(struct eregs *regs)
+{
+ int res = -1;
+
+ printk(BIOS_DEBUG, "System BIOS INT 15h\n");
+
+ switch (regs->eax & 0xffff) {
+#define BOOT_DISPLAY_DEFAULT 0
+#define BOOT_DISPLAY_CRT (1 << 0)
+#define BOOT_DISPLAY_TV (1 << 1)
+#define BOOT_DISPLAY_EFP (1 << 2)
+#define BOOT_DISPLAY_LCD (1 << 3)
+#define BOOT_DISPLAY_CRT2 (1 << 4)
+#define BOOT_DISPLAY_TV2 (1 << 5)
+#define BOOT_DISPLAY_EFP2 (1 << 6)
+#define BOOT_DISPLAY_LCD2 (1 << 7)
+ case 0x5f35:
+ regs->eax = 0x5f;
+ regs->ecx = BOOT_DISPLAY_DEFAULT;
+ res = 0;
+ break;
+ case 0x5f40:
+ regs->eax = 0x5f;
+ regs->ecx = 3; // This is mainboard specific
+ printk(BIOS_DEBUG, "DISPLAY=%x\n", regs->ecx);
+ res = 0;
+ break;
+ case 0x4e08:
+ switch (regs->ebx & 0xff) {
+ case 0x00:
+ regs->eax &= ~(0xff);
+ regs->ebx = (regs->ebx & ~(0xff)) | __int15_func.regs.func00_LCD_panel_id;
+ printk(BIOS_DEBUG, "DISPLAY = %x\n", regs->ebx & 0xff);
+ res = 0;
+ break;
+ case 0x02:
+ break;
+ case 0x05:
+ regs->eax &= ~(0xff);
+ regs->ebx = (regs->ebx & ~(0xff)) | __int15_func.regs.func05_TV_standard;
+ printk(BIOS_DEBUG, "TV = %x\n", regs->ebx & 0xff);
+ res = 0;
+ break;
+ case 0x80:
+ regs->eax &= ~(0xff);
+ regs->ebx &= ~(0xff);
+ printk(BIOS_DEBUG, "Integrated System Information = %x:%x\n", regs->edx, regs->edi);
+ vgainfo_addr = (regs->edx * 16) + regs->edi;
+ res = 0;
+ break;
+ case 0x89:
+ regs->eax &= ~(0xff);
+ regs->ebx &= ~(0xff);
+ printk(BIOS_DEBUG, "Get supported display device information\n");
+ res = 0;
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n", regs->eax & 0xffff);
+ break;
+ }
+
+ return res;
+}
+
+/* Initialization VBIOS function extensions */
+void install_INT15_function_extensions(INT15_function_extensions *int15_func)
+{
+ printk(BIOS_DEBUG, "Initialize function extensions for Callback function number 04E08h ..\n");
+ __int15_func.regs.func00_LCD_panel_id = int15_func->regs.func00_LCD_panel_id;
+ __int15_func.regs.func05_TV_standard = int15_func->regs.func05_TV_standard;
+ mainboard_interrupt_handlers(0x15, &sbios_INT15_handler);
+}
Added: trunk/src/mainboard/siemens/sitemp_g1p1/int15_func.h
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/int15_func.h Wed May 11 09:47:43 2011 (r6567)
@@ -0,0 +1,35 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2009 coresystems GmbH
+ * Copyright (C) 2009 Libra Li <libra.li at technexion.com>
+ * Copyright (C) 2010 Siemens AG, Inc.
+ * (Written by Josef Kellermann <joseph.kellermann at heitec.de> for Siemens AG, Inc.)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+typedef struct {
+ u8 func00_LCD_panel_id; // Callback Sub-Function 00h - Get LCD Panel ID
+ u8 func02_set_expansion;
+ u8 func05_TV_standard; // Callback Sub-Function 05h - Select Boot-up TV Standard
+ u16 func80_sysinfo_table;
+}INT15_regs;
+
+typedef struct {
+ INT15_regs regs;
+}INT15_function_extensions;
+
+extern void install_INT15_function_extensions(INT15_function_extensions *);
Modified: trunk/src/mainboard/siemens/sitemp_g1p1/irq_tables.c
==============================================================================
--- trunk/src/mainboard/amd/dbm690t/irq_tables.c Tue May 10 23:53:13 2011 (r6565)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/irq_tables.c Wed May 11 09:47:43 2011 (r6567)
@@ -23,6 +23,7 @@
Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
*/
+
#include <console/console.h>
#include <device/pci.h>
#include <string.h>
@@ -31,7 +32,23 @@
#include <cpu/amd/amdk8_sysconf.h>
-
+/* Platform IRQs */
+#define PIRQA 10
+#define PIRQB 11
+#define PIRQC 5
+#define PIRQD 15
+
+/* Map */
+#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */
+#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */
+#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */
+#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */
+
+/* Link */
+#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */
+#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */
+#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */
+#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */
static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
@@ -51,6 +68,7 @@
pirq_info->slot = slot;
pirq_info->rfu = rfu;
}
+extern u8 bus_isa;
extern u8 bus_rs690[8];
extern u8 bus_sb600[2];
extern unsigned long sbdn_sb600;
@@ -96,9 +114,7 @@
slot_num = 0;
/* pci bridge */
- write_pirq_info(pirq_info, bus_sb600[0], ((sbdn_sb600 + 0x14) << 3) | 4,
- 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
- 0);
+ write_pirq_info(pirq_info, bus_sb600[0], ((sbdn_sb600 + 0x14) << 3) | 4, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 1, 0);
pirq_info++;
slot_num++;
Modified: trunk/src/mainboard/siemens/sitemp_g1p1/mainboard.c
==============================================================================
--- trunk/src/mainboard/amd/dbm690t/mainboard.c Tue May 10 23:53:13 2011 (r6565)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/mainboard.c Wed May 11 09:47:43 2011 (r6567)
@@ -2,7 +2,9 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2008 Advanced Micro Devices, Inc.
- *
+ * Copyright (C) 2010 Siemens AG, Inc.
+ * (Written by Josef Kellermann <joseph.kellermann at heitec.de> for Siemens AG, Inc.)
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
@@ -16,135 +18,393 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-
+
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <arch/io.h>
+#include <delay.h>
#include <boot/tables.h>
#include <cpu/x86/msr.h>
#include <cpu/amd/mtrr.h>
#include <device/pci_def.h>
+#include <pc80/mc146818rtc.h>
+#include <cpu/x86/lapic.h>
#include <southbridge/amd/sb600/sb600.h>
+#include <southbridge/amd/rs690/chip.h>
+#include <southbridge/amd/rs690/rs690.h>
+#include <superio/ite/it8712f/it8712f.h>
#include "chip.h"
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
+#include <x86emu/x86emu.h>
+#endif
+#include "int15_func.h"
+
+// ****LCD panel ID support: *****
+// Callback Sub-Function 00h - Get LCD Panel ID
+#define PANEL_TABLE_ID_NO 0 // no LCD
+#define PANEL_TABLE_ID1 1 // 1024x768_65MHz_Dual
+#define PANEL_TABLE_ID2 2 // 920x1200_162MHz
+#define PANEL_TABLE_ID3 3 // 600x1200_162MHz
+#define PANEL_TABLE_ID4 4 // 1024x768_65MHz
+#define PANEL_TABLE_ID5 5 // 1400x1050_108MHz
+#define PANEL_TABLE_ID6 6 // 1680x1050_119MHz
+#define PANEL_TABLE_ID7 7 // 2048x1536_164MHz
+#define PANEL_TABLE_ID8 8 // 1280x1024_108MHz
+#define PANEL_TABLE_ID9 9 // 1366x768_86MHz_chimei_V32B1L01
+
+// Callback Sub-Function 05h Select Boot-up TV Standard
+#define TV_MODE_00 0x00 /* NTSC */
+#define TV_MODE_01 0x01 /* PAL */
+#define TV_MODE_02 0x02 /* PALM */
+#define TV_MODE_03 0x03 /* PAL60 */
+#define TV_MODE_04 0x04 /* NTSCJ */
+#define TV_MODE_05 0x05 /* PALCN */
+#define TV_MODE_06 0x06 /* PALN */
+#define TV_MODE_09 0x09 /* SCART-RGB */
+#define TV_MODE_NO 0xff /* No TV Support */
+
+#define PLX_VIDDID 0x861610b5
+
+/* 7475 Common Registers */
+#define REG_DEVREV2 0x12 /* ADT7490 only */
+#define REG_VTT 0x1E /* ADT7490 only */
+#define REG_EXTEND3 0x1F /* ADT7490 only */
+#define REG_VOLTAGE_BASE 0x20
+#define REG_TEMP_BASE 0x25
+#define REG_TACH_BASE 0x28
+#define REG_PWM_BASE 0x30
+#define REG_PWM_MAX_BASE 0x38
+#define REG_DEVID 0x3D
+#define REG_VENDID 0x3E
+#define REG_DEVID2 0x3F
+#define REG_STATUS1 0x41
+#define REG_STATUS2 0x42
+#define REG_VID 0x43 /* ADT7476 only */
+#define REG_VOLTAGE_MIN_BASE 0x44
+#define REG_VOLTAGE_MAX_BASE 0x45
+#define REG_TEMP_MIN_BASE 0x4E
+#define REG_TEMP_MAX_BASE 0x4F
+#define REG_TACH_MIN_BASE 0x54
+#define REG_PWM_CONFIG_BASE 0x5C
+#define REG_TEMP_TRANGE_BASE 0x5F
+#define REG_PWM_MIN_BASE 0x64
+#define REG_TEMP_TMIN_BASE 0x67
+#define REG_TEMP_THERM_BASE 0x6A
+#define REG_REMOTE1_HYSTERSIS 0x6D
+#define REG_REMOTE2_HYSTERSIS 0x6E
+#define REG_TEMP_OFFSET_BASE 0x70
+#define REG_CONFIG2 0x73
+#define REG_EXTEND1 0x76
+#define REG_EXTEND2 0x77
+#define REG_CONFIG1 0x40 // ADT7475
+#define REG_CONFIG3 0x78
+#define REG_CONFIG5 0x7C
+#define REG_CONFIG6 0x10 // ADT7475
+#define REG_CONFIG7 0x11 // ADT7475
+#define REG_CONFIG4 0x7D
+#define REG_STATUS4 0x81 /* ADT7490 only */
+#define REG_VTT_MIN 0x84 /* ADT7490 only */
+#define REG_VTT_MAX 0x86 /* ADT7490 only */
+
+#define VID_VIDSEL 0x80 /* ADT7476 only */
+
+#define CONFIG2_ATTN 0x20
+#define CONFIG3_SMBALERT 0x01
+#define CONFIG3_THERM 0x02
+#define CONFIG4_PINFUNC 0x03
+#define CONFIG4_MAXDUTY 0x08
+#define CONFIG4_ATTN_IN10 0x30
+#define CONFIG4_ATTN_IN43 0xC0
+#define CONFIG5_TWOSCOMP 0x01
+#define CONFIG5_TEMPOFFSET 0x02
+#define CONFIG5_VIDGPIO 0x10 /* ADT7476 only */
+#define REMOTE1 0
+#define LOCAL 1
+#define REMOTE2 2
+
+/* ADT7475 Settings */
+#define ADT7475_VOLTAGE_COUNT 5 /* Not counting Vtt */
+#define ADT7475_TEMP_COUNT 3
+#define ADT7475_TACH_COUNT 4
+#define ADT7475_PWM_COUNT 3
+
+/* Macros to easily index the registers */
+#define TACH_REG(idx) (REG_TACH_BASE + ((idx) * 2))
+#define TACH_MIN_REG(idx) (REG_TACH_MIN_BASE + ((idx) * 2))
+
+#define PWM_REG(idx) (REG_PWM_BASE + (idx))
+#define PWM_MAX_REG(idx) (REG_PWM_MAX_BASE + (idx))
+#define PWM_MIN_REG(idx) (REG_PWM_MIN_BASE + (idx))
+#define PWM_CONFIG_REG(idx) (REG_PWM_CONFIG_BASE + (idx))
+
+#define VOLTAGE_REG(idx) (REG_VOLTAGE_BASE + (idx))
+#define VOLTAGE_MIN_REG(idx) (REG_VOLTAGE_MIN_BASE + ((idx) * 2))
+#define VOLTAGE_MAX_REG(idx) (REG_VOLTAGE_MAX_BASE + ((idx) * 2))
+
+#define TEMP_REG(idx) (REG_TEMP_BASE + (idx))
+#define TEMP_MIN_REG(idx) (REG_TEMP_MIN_BASE + ((idx) * 2))
+#define TEMP_MAX_REG(idx) (REG_TEMP_MAX_BASE + ((idx) * 2))
+#define TEMP_TMIN_REG(idx) (REG_TEMP_TMIN_BASE + (idx))
+#define TEMP_THERM_REG(idx) (REG_TEMP_THERM_BASE + (idx))
+#define TEMP_OFFSET_REG(idx) (REG_TEMP_OFFSET_BASE + (idx))
+#define TEMP_TRANGE_REG(idx) (REG_TEMP_TRANGE_BASE + (idx))
-#define ADT7461_ADDRESS 0x4C
-#define ARA_ADDRESS 0x0C /* Alert Response Address */
#define SMBUS_IO_BASE 0x1000
+#define ADT7475_ADDRESS 0x2E
+
+#define D_OPEN (1 << 6)
+#define D_CLS (1 << 5)
+#define D_LCK (1 << 4)
+#define G_SMRAME (1 << 3)
+#define A_BASE_SEG ((0 << 2) | (1 << 1) | (0 << 0)) // 0x2: SMM space at 640KB-768KB
extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address);
-extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address,
- u8 val);
-#define ADT7461_read_byte(address) \
- do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address)
-#define ARA_read_byte(address) \
- do_smbus_read_byte(SMBUS_IO_BASE, ARA_ADDRESS, address)
-#define ADT7461_write_byte(address, val) \
- do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val)
+extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val);
uint64_t uma_memory_base, uma_memory_size;
+static u32 smbus_io_base = SMBUS_IO_BASE;
+static u32 adt7475_address = ADT7475_ADDRESS;
-/********************************************************
-* dbm690t uses a BCM5789 as on-board NIC.
-* It has a pin named LOW_POWER to enable it into LOW POWER state.
-* In order to run NIC, we should let it out of Low power state. This pin is
-* controlled by sb600 GPM3.
-* RRG4.2.3 GPM as GPIO
-* GPM pins can be used as GPIO. The GPM I/O functions is controlled by three registers:
-* I/O C50, C51, C52, PM I/O94, 95, 96.
-* RRG4.2.3.1 GPM pins as Input
-* RRG4.2.3.2 GPM pins as Output
-********************************************************/
-static void enable_onboard_nic(void)
+/* Macro to read the registers */
+#define adt7475_read_byte(reg) \
+ do_smbus_read_byte(smbus_io_base, adt7475_address, reg)
+
+#define adt7475_write_byte(reg, val) \
+ do_smbus_write_byte(smbus_io_base, adt7475_address, reg, val)
+
+#define TWOS_COMPL 1
+
+struct __table__{
+ const char *info;
+ u8 val;
+};
+
+struct __table__ dutycycles[] = {
+ {"25%", 0x3f},{"30%", 0x4c},{"35%", 0x59},{"40%", 0x66},{"45%", 0x73},
+ {"50%", 0x80},{"55%", 0x8d},{"60%", 0x9a},{"65%", 0xa7},{"70%", 0xb4},
+ {"75%", 0xc1},{"80%", 0xce},{"85%", 0xdb},{"90%", 0xe8},{"95%", 0xf5},
+ {"100%", 0xff}
+};
+#define SIZEOF_DUTYCYCLES sizeof(dutycycles)/sizeof(struct __table__)
+#define DUTYCYCLE(i,d) (i < SIZEOF_DUTYCYCLES) ? dutycycles[i].val : dutycycles[d].val // hopefully d is a correct value !!! fix
+#define DUTYCYCLE_INFO(i) (i < SIZEOF_DUTYCYCLES) ? dutycycles[i].info : "out_of_range"
+#if TWOS_COMPL == 0
+struct __table__ temperatures[] = {
+ {"30°C", 0x5e},{"35°C", 0x63},{"40°C", 0x68},{"45°C", 0x6d},{"50°C", 0x72},
+ {"55°C", 0x77},{"60°C", 0x7c},{"65°C", 0x81},{"70°C", 0x86},{"75°C", 0x8b},
+ {"80°C", 0x90}
+};
+#else
+struct __table__ temperatures[] = {
+ {"30°C", 30},{"35°C", 35},{"40°C", 40},{"45°C", 45},{"50°C", 50},
+ {"55°C", 55},{"60°C", 60},{"65°C", 65},{"70°C", 70},{"75°C", 75},
+ {"80°C", 80}
+};
+#endif
+int trange[] = {2.0,2.5,3.33,4.0,5.0,6.67,8.0,10.0,13.33,16.0,20.0,26.67,32.0,40.0,53.33,80.0};
+
+#define SIZEOF_TEMPERATURES sizeof(temperatures)/sizeof(struct __table__)
+#define TEMPERATURE(i,d) (i < SIZEOF_TEMPERATURES) ? temperatures[i].val : temperatures[d].val // hopefully d is a correct value !!! fix
+#define TEMPERATURE_INFO(i) (i < SIZEOF_TEMPERATURES) ? temperatures[i].info : "out of range"
+
+struct fan_control {
+ unsigned int enable : 1;
+ u8 polarity;
+ u8 t_min;
+ u8 t_max;
+ u8 pwm_min;
+ u8 pwm_max;
+ u8 t_range;
+};
+/* ############################################################################################# */
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
+static int int15_handler(void)
{
- u8 byte;
+#define BOOT_DISPLAY_DEFAULT 0
+#define BOOT_DISPLAY_CRT (1 << 0)
+#define BOOT_DISPLAY_TV (1 << 1)
+#define BOOT_DISPLAY_EFP (1 << 2)
+#define BOOT_DISPLAY_LCD (1 << 3)
+#define BOOT_DISPLAY_CRT2 (1 << 4)
+#define BOOT_DISPLAY_TV2 (1 << 5)
+#define BOOT_DISPLAY_EFP2 (1 << 6)
+#define BOOT_DISPLAY_LCD2 (1 << 7)
+
+ printk(BIOS_DEBUG, "%s: AX=%04x BX=%04x CX=%04x DX=%04x\n",
+ __func__, M.x86.R_AX, M.x86.R_BX, M.x86.R_CX, M.x86.R_DX);
+
+ switch (M.x86.R_AX) {
+ case 0x4e08: /* Boot Display */
+ switch (M.x86.R_BX) {
+ case 0x80:
+ M.x86.R_AX &= ~(0xff); // Success
+ M.x86.R_BX &= ~(0xff);
+ printk(BIOS_DEBUG, "Integrated System Information\n");
+ break;
+ case 0x00:
+ M.x86.R_AX &= ~(0xff);
+ M.x86.R_BX = 0x00;
+ printk(BIOS_DEBUG, "Panel ID = 0\n");
+ break;
+ case 0x05:
+ M.x86.R_AX &= ~(0xff);
+ M.x86.R_BX = 0xff;
+ printk(BIOS_DEBUG, "TV = off\n");
+ break;
+ default:
+ return 0;
+ }
+ break;
+ case 0x5f35: /* Boot Display */
+ M.x86.R_AX = 0x005f; // Success
+ M.x86.R_CL = BOOT_DISPLAY_DEFAULT;
+ break;
+ case 0x5f40: /* Boot Panel Type */
+ // M.x86.R_AX = 0x015f; // Supported but failed
+ M.x86.R_AX = 0x005f; // Success
+ M.x86.R_CL = 3; // Display ID
+ break;
+ default:
+ /* Interrupt was not handled */
+ return 0;
+ }
- printk(BIOS_INFO, "%s.\n", __func__);
+ /* Interrupt handled */
+ return 1;
+}
- /* set index register 0C50h to 13h (miscellaneous control) */
- outb(0x13, 0xC50); /* CMIndex */
+static void int15_install(void)
+{
+ typedef int (* yabel_handleIntFunc)(void);
+ extern yabel_handleIntFunc yabel_intFuncArray[256];
+ yabel_intFuncArray[0x15] = int15_handler;
+}
+#endif
+/* ############################################################################################# */
+
+ /**
+ * @brief
+ *
+ * @param
+ */
- /* set CM data register 0C51h bits [7:6] to 01b to set Input/Out control */
- byte = inb(0xC51);
- byte &= 0x3F;
- byte |= 0x40;
- outb(byte, 0xC51);
-
- /* set GPM port 0C52h bit 3 to 0 to enable output for GPM3 */
- byte = inb(0xC52);
- byte &= ~0x8;
- outb(byte, 0xC52);
-
- /* set CM data register 0C51h bits [7:6] to 10b to set Output state control */
- byte = inb(0xC51);
- byte &= 0x3F;
- byte |= 0x80; /* 7:6=10 */
- outb(byte, 0xC51);
-
- /* set GPM port 0C52h bit 3 to 0 to output 0 on GPM3 */
- byte = inb(0xC52);
- byte &= ~0x8;
- outb(byte, 0xC52);
+static u8 calc_trange(u8 t_min, u8 t_max) {
+
+ u8 prev;
+ int i;
+ int diff = t_max - t_min;
+
+ // walk through the trange table
+ for(i = 0, prev = 0; i < sizeof(trange)/sizeof(int); i++) {
+ if( trange[i] < diff ) {
+ prev = i; // save last val
+ continue;
+ }
+ if( diff == trange[i] ) return i;
+ if( (diff - trange[prev]) < (trange[i] - diff) ) break; // return with last val index
+ return i;
+ }
+ return prev;
}
/********************************************************
-* dbm690t uses SB600 GPIO9 to detect IDE_DMA66.
+* sina uses SB600 GPIO9 to detect IDE_DMA66.
* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to
* get the cable type, 40 pin or 80 pin?
********************************************************/
-static void get_ide_dma66(void)
+static void cable_detect(void)
{
+
u8 byte;
struct device *sm_dev;
struct device *ide_dev;
-
- printk(BIOS_INFO, "%s.\n", __func__);
+
+ /* SMBus Module and ACPI Block (Device 20, Function 0) on SB600 */
+ printk(BIOS_DEBUG, "%s.\n", __func__);
sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
byte = pci_read_config8(sm_dev, 0xA9);
byte |= (1 << 5); /* Set Gpio9 as input */
pci_write_config8(sm_dev, 0xA9, byte);
-
+
+ /* IDE Controller (Device 20, Function 1) on SB600 */
ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1));
+
+ byte = pci_read_config8(ide_dev, 9);
+ printk(BIOS_INFO, "IDE controller in %s Mode\n", byte & (1 << 0) ? "Native" : "Compatibility");
+
byte = pci_read_config8(ide_dev, 0x56);
byte &= ~(7 << 0);
- if ((1 << 5) & pci_read_config8(sm_dev, 0xAA))
+ if( pci_read_config8(sm_dev, 0xAA) & (1 << 5) )
byte |= 2 << 0; /* mode 2 */
else
byte |= 5 << 0; /* mode 5 */
+ printk(BIOS_INFO, "DMA mode %d selected\n", byte & (7 << 0));
pci_write_config8(ide_dev, 0x56, byte);
}
-/*
- * set thermal config
+/**
+ * @brief Detect the ADT7475 device
+ *
+ * @param
*/
-static void set_thermal_config(void)
+
+static const char * adt7475_detect( void ) {
+
+ int vendid, devid, devid2;
+ const char *name = NULL;
+
+ vendid = adt7475_read_byte(REG_VENDID);
+ devid2 = adt7475_read_byte(REG_DEVID2);
+ if (vendid != 0x41 || /* Analog Devices */
+ (devid2 & 0xf8) != 0x68) {
+ return name;
+ }
+
+ devid = adt7475_read_byte(REG_DEVID);
+ if (devid == 0x73)
+ name = "adt7473";
+ else if (devid == 0x75 && adt7475_address == 0x2e)
+ name = "adt7475";
+ else if (devid == 0x76)
+ name = "adt7476";
+ else if ((devid2 & 0xfc) == 0x6c)
+ name = "adt7490";
+
+ return name;
+}
+
+// thermal control defaults
+const struct fan_control cpu_fan_control_defaults = {
+ .enable = 0, // disable by default
+ .polarity = 0, // high by default
+ .t_min = 3, // default = 45°C
+ .t_max = 7, // 65°C
+ .pwm_min = 1, // default dutycycle = 30%
+ .pwm_max = 13, // 90%
+};
+const struct fan_control case_fan_control_defaults = {
+ .enable = 0, // disable by default
+ .polarity = 0, // high by default
+ .t_min = 2, // default = 40°C
+ .t_max = 8, // 70°C
+ .pwm_min = 0, // default dutycycle = 25%
+ .pwm_max = 13, // 90%
+};
+
+static void pm_init( void )
{
- u8 byte;
u16 word;
- device_t sm_dev;
-
- /* set ADT 7461 */
- ADT7461_write_byte(0x0B, 0x50); /* Local Temperature Hight limit */
- ADT7461_write_byte(0x0C, 0x00); /* Local Temperature Low limit */
- ADT7461_write_byte(0x0D, 0x50); /* External Temperature Hight limit High Byte */
- ADT7461_write_byte(0x0E, 0x00); /* External Temperature Low limit High Byte */
-
- ADT7461_write_byte(0x19, 0x55); /* External THERM limit */
- ADT7461_write_byte(0x20, 0x55); /* Local THERM limit */
-
- byte = ADT7461_read_byte(0x02); /* read status register to clear it */
- ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */
- printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte);
+ u8 byte;
+ device_t sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
- /* sb600 settings for thermal config */
/* set SB600 GPIO 64 to GPIO with pull-up */
byte = pm2_ioread(0x42);
byte &= 0x3f;
pm2_iowrite(0x42, byte);
- /* set GPIO 64 to input */
- sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+ /* set GPIO 64 to tristate */
word = pci_read_config16(sm_dev, 0x56);
word |= 1 << 7;
pci_write_config16(sm_dev, 0x56, word);
@@ -163,41 +423,477 @@
byte = pm_ioread(0x3c);
byte &= 0xf3;
pm_iowrite(0x3c, byte);
+
+ /* set GPM5 to not wake from s5 */
+ byte = pm_ioread(0x77);
+ byte &= ~(1 << 5);
+ pm_iowrite(0x77, byte);
+}
+
+ /**
+ * @brief Setup thermal config on SINA Mainboard
+ *
+ * @param
+ */
+
+static void set_thermal_config(void)
+{
+ u8 byte, byte2;
+ u8 cpu_pwm_conf, case_pwm_conf;
+ device_t sm_dev;
+ struct fan_control cpu_fan_control, case_fan_control;
+ const char *name = NULL;
+
+
+ sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+ smbus_io_base = pci_read_config32(sm_dev, 0x10) & ~(0xf); // get BAR0-Address which holds the SMBUS_IO_BASE
+
+ if( (name = adt7475_detect()) == NULL ) {
+ printk(BIOS_NOTICE, "Couldn't detect an ADT7473/75/76/90 part at %x:%x\n", smbus_io_base, adt7475_address);
+ return;
+ }
+ printk(BIOS_DEBUG, "Found %s part at %x:%x\n", name, smbus_io_base, adt7475_address);
+
+ cpu_fan_control = cpu_fan_control_defaults;
+ case_fan_control = case_fan_control_defaults;
+
+ if( get_option(&byte, "cpu_fan_control") == -4 ) {
+ printk(BIOS_WARNING, "%s: CMOS checksum invalid, keeping default values\n",__func__);
+ } else {
+ // get all the options needed
+ if( get_option(&byte, "cpu_fan_control") == 0 )
+ cpu_fan_control.enable = byte ? 1 : 0;
+
+ get_option(&cpu_fan_control.polarity, "cpu_fan_polarity");
+ get_option(&cpu_fan_control.t_min, "cpu_t_min");
+ get_option(&cpu_fan_control.t_max, "cpu_t_max");
+ get_option(&cpu_fan_control.pwm_min, "cpu_dutycycle_min");
+ get_option(&cpu_fan_control.pwm_max, "cpu_dutycycle_max");
+
+ if( get_option(&byte, "chassis_fan_control") == 0)
+ case_fan_control.enable = byte ? 1 : 0;
+ get_option(&case_fan_control.polarity, "chassis_fan_polarity");
+ get_option(&case_fan_control.t_min, "chassis_t_min");
+ get_option(&case_fan_control.t_max, "chassis_t_max");
+ get_option(&case_fan_control.pwm_min, "chassis_dutycycle_min");
+ get_option(&case_fan_control.pwm_max, "chassis_dutycycle_max");
+
+ }
+
+ printk(BIOS_DEBUG, "cpu_fan_control:%s", cpu_fan_control.enable ? "enable" : "disable");
+ printk(BIOS_DEBUG, " cpu_fan_polarity:%s", cpu_fan_control.polarity ? "low" : "high");
+
+ printk(BIOS_DEBUG, " cpu_t_min:%s", TEMPERATURE_INFO(cpu_fan_control.t_min));
+ cpu_fan_control.t_min = TEMPERATURE(cpu_fan_control.t_min, cpu_fan_control_defaults.t_min);
+
+ printk(BIOS_DEBUG, " cpu_t_max:%s", TEMPERATURE_INFO(cpu_fan_control.t_max));
+ cpu_fan_control.t_max = TEMPERATURE(cpu_fan_control.t_max, cpu_fan_control_defaults.t_max);
+
+ printk(BIOS_DEBUG, " cpu_pwm_min:%s", DUTYCYCLE_INFO(cpu_fan_control.pwm_min));
+ cpu_fan_control.pwm_min = DUTYCYCLE(cpu_fan_control.pwm_min, cpu_fan_control_defaults.pwm_min);
+
+ printk(BIOS_DEBUG, " cpu_pwm_max:%s", DUTYCYCLE_INFO(cpu_fan_control.pwm_max));
+ cpu_fan_control.pwm_max = DUTYCYCLE(cpu_fan_control.pwm_max, cpu_fan_control_defaults.pwm_max);
+
+ cpu_fan_control.t_range = calc_trange(cpu_fan_control.t_min, cpu_fan_control.t_max);
+ printk(BIOS_DEBUG, " cpu_t_range:0x%02x\n", cpu_fan_control.t_range);
+ cpu_fan_control.t_range <<= 4;
+ cpu_fan_control.t_range |= (4 << 0); // 35.3Hz
+
+ printk(BIOS_DEBUG, "chassis_fan_control:%s", case_fan_control.enable ? "enable" : "disable");
+ printk(BIOS_DEBUG, " chassis_fan_polarity:%s", case_fan_control.polarity ? "low" : "high");
+
+ printk(BIOS_DEBUG, " chassis_t_min:%s", TEMPERATURE_INFO(case_fan_control.t_min));
+ case_fan_control.t_min = TEMPERATURE(case_fan_control.t_min, case_fan_control_defaults.t_min);
+
+ printk(BIOS_DEBUG, " chassis_t_max:%s", TEMPERATURE_INFO(case_fan_control.t_max));
+ case_fan_control.t_max = TEMPERATURE(case_fan_control.t_max, case_fan_control_defaults.t_max);
+
+ printk(BIOS_DEBUG, " chassis_pwm_min:%s", DUTYCYCLE_INFO(case_fan_control.pwm_min));
+ case_fan_control.pwm_min = DUTYCYCLE(case_fan_control.pwm_min, case_fan_control_defaults.pwm_min);
+
+ printk(BIOS_DEBUG, " chassis_pwm_max:%s", DUTYCYCLE_INFO(case_fan_control.pwm_max));
+ case_fan_control.pwm_max = DUTYCYCLE(case_fan_control.pwm_max, case_fan_control_defaults.pwm_max);
+
+ case_fan_control.t_range = calc_trange(case_fan_control.t_min, case_fan_control.t_max);
+ printk(BIOS_DEBUG, " case_t_range:0x%02x\n", case_fan_control.t_range);
+ case_fan_control.t_range <<= 4;
+ case_fan_control.t_range |= (4 << 0); // 35.3Hz
+
+ cpu_pwm_conf = (((cpu_fan_control.polarity & 0x1) << 4) | 0x2); // bit 4 control polarity of PWMx output
+ case_pwm_conf = (((case_fan_control.polarity & 0x1) << 4) | 0x2); // bit 4 control polarity of PWMx output
+ cpu_pwm_conf |= cpu_fan_control.enable ? (0 << 5) : (7 << 5); // manual control
+ case_pwm_conf |= case_fan_control.enable ? (1 << 5) : (7 << 5); // local temp
+
+ /* set adt7475 */
+
+ adt7475_write_byte(REG_CONFIG1, 0x04); // clear register, bit 2 is read only
+
+ /* Config Register 6: */
+ adt7475_write_byte(REG_CONFIG6, 0x00);
+ /* Config Register 7 */
+ adt7475_write_byte(REG_CONFIG7, 0x00);
+
+ /* Config Register 5: */
+ /* set Offset 64 format, enable THERM on Remote 1& Local */
+ adt7475_write_byte(REG_CONFIG5, TWOS_COMPL ? 0x61 : 0x60);
+ /* No offset for remote 1 */
+ adt7475_write_byte(TEMP_OFFSET_REG(0), 0x00);
+ /* No offset for local */
+ adt7475_write_byte(TEMP_OFFSET_REG(1), 0x00);
+ /* No offset for remote 2 */
+ adt7475_write_byte(TEMP_OFFSET_REG(2), 0x00);
+
+ /* remote 1 low temp limit */
+ adt7475_write_byte(TEMP_MIN_REG(0), 0x00);
+ /* remote 1 High temp limit (90C) */
+ adt7475_write_byte(TEMP_MAX_REG(0), 0x9a);
+
+ /* local Low Temp Limit */
+ adt7475_write_byte(TEMP_MIN_REG(1), 0x00);
+ /* local High Limit (90C) */
+ adt7475_write_byte(TEMP_MAX_REG(1), 0x9a);
+
+ /* remote 1 therm temp limit (95C) */
+ adt7475_write_byte(TEMP_THERM_REG(0), 0x9f);
+ /* local therm temp limit (95C) */
+ adt7475_write_byte(TEMP_THERM_REG(1), 0x9f);
+
+ /* PWM 1 configuration register CPU fan controlled by CPU Thermal Diode */
+ adt7475_write_byte(PWM_CONFIG_REG(0), cpu_pwm_conf);
+ /* PWM 3 configuration register Case fan controlled by ADTxxxx temp */
+ adt7475_write_byte(PWM_CONFIG_REG(2), case_pwm_conf);
+
+ if( cpu_fan_control.enable ) {
+ /* PWM 1 minimum duty cycle (37%) */
+ adt7475_write_byte(PWM_MIN_REG(0), cpu_fan_control.pwm_min);
+ /* PWM 1 Maximum duty cycle (100%) */
+ adt7475_write_byte(PWM_MAX_REG(0), cpu_fan_control.pwm_max);
+ /* Remote 1 temperature Tmin (32C) */
+ adt7475_write_byte(TEMP_TMIN_REG(0), cpu_fan_control.t_min);
+ /* remote 1 Trange (53C ramp range) */
+ adt7475_write_byte(TEMP_TRANGE_REG(0), cpu_fan_control.t_range);
+ } else {
+ adt7475_write_byte(PWM_REG(0), cpu_fan_control.pwm_max);
+ }
+
+ if( case_fan_control.enable ) {
+ /* PWM 2 minimum duty cycle (37%) */
+ adt7475_write_byte(PWM_MIN_REG(2), case_fan_control.pwm_min);
+ /* PWM 2 Maximum Duty Cycle (100%) */
+ adt7475_write_byte(PWM_MAX_REG(2), case_fan_control.pwm_max);
+ /* local temperature Tmin (32C) */
+ adt7475_write_byte(TEMP_TMIN_REG(1), case_fan_control.t_min);
+ /* local Trange (53C ramp range) */
+ adt7475_write_byte(TEMP_TRANGE_REG(1), case_fan_control.t_range); // Local TRange
+ adt7475_write_byte(TEMP_TRANGE_REG(2), case_fan_control.t_range); // PWM2 Freq
+ } else {
+ adt7475_write_byte(PWM_REG(2), case_fan_control.pwm_max);
+ }
+
+ /* Config Register 3 - enable smbalert & therm */
+ adt7475_write_byte(0x78, 0x03);
+ /* Config Register 4 - enable therm output */
+ adt7475_write_byte(0x7d, 0x09);
+ /* Interrupt Mask Register 2 - Mask SMB alert for Therm Conditions, Fan 3 fault, SmbAlert Fan for Therm Timer event */
+ adt7475_write_byte(0x75, 0x2e);
+
+ /* Config Register 1 Set Start bit */
+ adt7475_write_byte(0x40, 0x05);
+
+ /* Read status register to clear any old errors */
+ byte2 = adt7475_read_byte(0x42);
+ byte = adt7475_read_byte(0x41);
+
+ printk(BIOS_DEBUG, "Init 'Thermal Monitor' end , status 0x42 = 0x%02x, status 0x41 = 0x%02x\n",
+ byte2, byte);
+
+}
+
+ /**
+ * @brief
+ *
+ * @param
+ */
+
+static void patch_mmio_nonposted( void )
+{
+ unsigned reg, index;
+ resource_t rbase, rend;
+ u32 base, limit;
+ struct resource *resource;
+ device_t dev;
+ device_t k8_f1 = dev_find_slot(0, PCI_DEVFN(0x18,1));
+
+ printk(BIOS_DEBUG,"%s ...\n", __func__);
+
+ dev = dev_find_slot(1, PCI_DEVFN(5,0));
+ // the uma frame buffer
+ index = 0x10;
+ resource = probe_resource(dev, index);
+ if( resource ) {
+ // fixup resource nonposted in k8 mmio
+ /* Get the base address */
+ rbase = (resource->base >> 8) & ~(0xff);
+ /* Get the limit (rounded up) */
+ rend = (resource_end(resource) >> 8) & ~(0xff);
+
+ printk(BIOS_DEBUG,"%s %x base = %0llx limit = %0llx\n", dev_path(dev), index, rbase, rend);
+
+ for( reg = 0xb8; reg >= 0x80; reg -= 8 ) {
+ base = pci_read_config32(k8_f1,reg);
+ limit = pci_read_config32(k8_f1,reg+4);
+ printk(BIOS_DEBUG," %02x[%08x] %02x[%08x]", reg, base, reg+4, limit);
+ if( ((base & ~(0xff)) == rbase) && ((limit & ~(0xff)) == rend) ) {
+ limit |= (1 << 7);
+ printk(BIOS_DEBUG, "\nPatching %s %x <- %08x", dev_path(k8_f1), reg, limit);
+ pci_write_config32(k8_f1, reg+4, limit);
+ break;
+ }
+ }
+ printk(BIOS_DEBUG, "\n");
+ }
+}
+
+ /**
+ * @brief
+ *
+ * @param
+ */
+
+static void wait_pepp( void ) {
+
+ int boot_delay = 0;
+
+ if( get_option(&boot_delay, "boot_delay") < 0)
+ boot_delay = 5;
+
+ printk(BIOS_DEBUG, "boot_delay = %d sec\n", boot_delay);
+ if ( boot_delay > 0 ) {
+ init_timer();
+ // wait for PEPP-Board
+ printk(BIOS_INFO, "Give PEPP-Board %d sec(s) time to coming up ", boot_delay);
+ while ( boot_delay ) {
+ lapic_write(LAPIC_TMICT, 0xffffffff);
+ udelay(1000000); // delay time approx. 1 sec
+ printk(BIOS_INFO, ".");
+ boot_delay--;
+ }
+ printk(BIOS_INFO, "\n");
+ }
+}
+
+ /**
+ * @brief
+ *
+ * @param
+ */
+
+struct {
+ unsigned int bus;
+ unsigned int devfn;
+} slot[] = {
+ {0, PCI_DEVFN(0,0)},
+ {0, PCI_DEVFN(18,0)},
+ {0, PCI_DEVFN(19,0)},{0, PCI_DEVFN(19,1)},{0, PCI_DEVFN(19,2)},{0, PCI_DEVFN(19,3)},{0, PCI_DEVFN(19,4)},{0, PCI_DEVFN(19,5)},
+ {0, PCI_DEVFN(20,0)},{0, PCI_DEVFN(20,1)},{0, PCI_DEVFN(20,2)},{0, PCI_DEVFN(20,3)},{0, PCI_DEVFN(20,5)},{0, PCI_DEVFN(20,6)},
+ {0, PCI_DEVFN(5,0)},{0, PCI_DEVFN(5,2)},
+ {255,0},
+};
+
+
+static void update_subsystemid( device_t dev ) {
+
+ int i;
+ struct mainboard_config *mb = dev->chip_info;
+
+ dev->subsystem_vendor = 0x110a;
+ if( mb->plx_present ){
+ dev->subsystem_device = 0x4076; // U1P1 = 0x4076, U1P0 = 0x4077
+ } else {
+ dev->subsystem_device = 0x4077; // U1P0 = 0x4077
+ }
+ printk(BIOS_INFO, "%s [%x/%x]\n", dev->chip_ops->name, dev->subsystem_vendor, dev->subsystem_device );
+ for( i=0; slot[i].bus < 255; i++) {
+ device_t d;
+ d = dev_find_slot(slot[i].bus,slot[i].devfn);
+ if( d ) {
+ printk(BIOS_DEBUG,"%s subsystem <- %x/%x\n", dev_path(d), dev->subsystem_vendor, dev->subsystem_device);
+ d->subsystem_device = dev->subsystem_device;
+ }
+ }
+}
+
+ /**
+ * @brief
+ *
+ * @param
+ */
- /* THERMTRIP pin */
- /* byte = pm_ioread(0x68);
- * byte |= 1 << 3;
- * pm_iowrite(0x68, byte);
- *
- * byte = pm_ioread(0x55);
- * byte |= 1 << 0;
- * pm_iowrite(0x55, byte);
- *
- * byte = pm_ioread(0x67);
- * byte &= ~( 1 << 6);
- * pm_iowrite(0x67, byte);
+static void detect_hw_variant( device_t dev ) {
+
+ device_t nb_dev =0, dev2 = 0;
+ struct southbridge_amd_rs690_config *cfg;
+ u32 lc_state, id = 0;
+ struct mainboard_config *mb = dev->chip_info;
+
+ printk(BIOS_INFO, "Scan for PLX device ...\n");
+ nb_dev = dev_find_slot(0, PCI_DEVFN(0, 0));
+ if (!nb_dev) {
+ die("CAN NOT FIND RS690 DEVICE, HALT!\n");
+ /* NOT REACHED */
+ }
+
+ dev2 = dev_find_slot(0, PCI_DEVFN(2, 0));
+ if (!dev2) {
+ die("CAN NOT FIND GFX DEVICE 2, HALT!\n");
+ /* NOT REACHED */
+ }
+ PcieReleasePortTraining(nb_dev, dev2, 2); // we assume PLX is connected to port 2
+
+ mdelay(40);
+ lc_state = nbpcie_p_read_index(dev2, 0xa5); /* lc_state */
+ printk(BIOS_DEBUG, "lc current state=%x\n", lc_state);
+ /* LC_CURRENT_STATE = bit0-5 */
+ switch( lc_state & 0x3f ){
+ case 0x00:
+ case 0x01:
+ case 0x02:
+ case 0x03:
+ case 0x04:
+ printk(BIOS_NOTICE, "No device present, skipping PLX scan ..\n");
+ break;
+ case 0x07:
+ case 0x10:
+ {
+ struct device dummy;
+ u32 pci_primary_bus, buses;
+ u16 secondary, subordinate;
+
+ printk(BIOS_DEBUG, "Scan for PLX bridge behind %s[%x]\n", dev_path(dev2), pci_read_config32(dev2, PCI_VENDOR_ID));
+ // save the existing primary/secondary/subordinate bus number configuration.
+ secondary = dev2->bus->secondary;
+ subordinate = dev2->bus->subordinate;
+ buses = pci_primary_bus = pci_read_config32(dev2, PCI_PRIMARY_BUS);
+
+ // Configure the bus numbers for this bridge
+ // bus number 1 is for internal gfx device, so we start with busnumber 2
+
+ buses &= 0xff000000;
+ buses |= ((2 << 8) | (0xff << 16));
+ // setup the buses in device 2
+ pci_write_config32(dev2,PCI_PRIMARY_BUS, buses);
+
+ // fake a device descriptor for a device behind device 2
+ dummy.bus = dev2->bus;
+ dummy.bus->secondary = (buses >> 8) & 0xff;
+ dummy.bus->subordinate = (buses >> 16) & 0xff;
+ dummy.path.type = DEVICE_PATH_PCI;
+ dummy.path.pci.devfn = PCI_DEVFN(0,0); // PLX: device number 0, function 0
+
+ id = pci_read_config32(&dummy, PCI_VENDOR_ID);
+ /* Have we found something?
+ * Some broken boards return 0 if a slot is empty, but
+ * the expected answer is 0xffffffff
+ */
+ if ((id == 0xffffffff) || (id == 0x00000000) || (id == 0x0000ffff) || (id == 0xffff0000)) {
+ printk(BIOS_DEBUG, "%s, bad id 0x%x\n", dev_path(&dummy), id);
+ } else {
+ printk(BIOS_DEBUG, "found device [%x]\n", id);
+ }
+ // restore changes made for device 2
+ dev2->bus->secondary = secondary;
+ dev2->bus->secondary = subordinate;
+ pci_write_config32(dev2, PCI_PRIMARY_BUS, pci_primary_bus);
+ }
+ break;
+ default:
+ break;
+ }
+
+ mb->plx_present = 0;
+ if( id == PLX_VIDDID ){
+ printk(BIOS_INFO, "found PLX device\n");
+ mb->plx_present = 1;
+ cfg = (struct southbridge_amd_rs690_config *)dev2->chip_info;
+ if( cfg->gfx_tmds ) {
+ printk(BIOS_INFO, "Disable 'gfx_tmds' support\n");
+ cfg->gfx_tmds = 0;
+ cfg->gfx_link_width = 4;
+ }
+ return;
+ }
+}
+
+static void smm_lock( void )
+{
+ /* LOCK the SMM memory window and enable normal SMM.
+ * After running this function, only a full reset can
+ * make the SMM registers writable again.
*/
+ printk(BIOS_DEBUG, "Locking SMM.\n");
+ pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), 0x69,
+ D_LCK | G_SMRAME | A_BASE_SEG);
+}
+
+ /**
+ * @brief Init
+ *
+ * @param the root device
+ */
+
+static void init(device_t dev)
+{
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL == 0
+ INT15_function_extensions int15_func;
+#endif
+
+ printk(BIOS_DEBUG, "%s %s[%x/%x] %s\n",
+ dev->chip_ops->name, dev_path(dev), dev->subsystem_vendor, dev->subsystem_device, __func__);
+
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL == 0
+ if( get_option(&int15_func.regs.func00_LCD_panel_id, "lcd_panel_id") < 0 )
+ int15_func.regs.func00_LCD_panel_id = PANEL_TABLE_ID_NO;
+ int15_func.regs.func05_TV_standard = TV_MODE_NO;
+ install_INT15_function_extensions(&int15_func);
+#endif
+ set_thermal_config();
+ pm_init();
+ cable_detect();
+ patch_mmio_nonposted();
+ smm_lock();
}
/*************************************************
-* enable the dedicated function in dbm690t board.
+* enable the dedicated function in sina board.
* This function called early than rs690_enable.
*************************************************/
-static void dbm690t_enable(device_t dev)
+static void enable_dev(device_t dev)
{
- printk(BIOS_INFO, "Mainboard DBM690T Enable. dev=0x%p\n", dev);
+
+ printk(BIOS_INFO, "%s %s[%x/%x] %s\n",
+ dev->chip_ops->name, dev_path(dev), dev->subsystem_vendor, dev->subsystem_device, __func__);
+#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
+ /* Install custom int15 handler for VGA OPROM */
+ int15_install();
+#endif
+ detect_hw_variant(dev);
+ update_subsystemid(dev);
+
#if (CONFIG_GFXUMA == 1)
+ {
msr_t msr, msr2;
-
+
/* TOP_MEM: the top of DRAM below 4G */
msr = rdmsr(TOP_MEM);
- printk(BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
+ printk(BIOS_DEBUG, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
__func__, msr.lo, msr.hi);
-
+
/* TOP_MEM2: the top of DRAM above 4G */
msr2 = rdmsr(TOP_MEM2);
- printk(BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
+
+ printk(BIOS_DEBUG, "%s, TOP MEM2: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
__func__, msr2.lo, msr2.hi);
switch (msr.lo) {
@@ -219,35 +915,50 @@
}
uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */
+
printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n",
__func__, uma_memory_size, uma_memory_base);
/* TODO: TOP_MEM2 */
+ }
#else
- uma_memory_size = 0x8000000; /* 128M recommended UMA */
- uma_memory_base = 0x38000000; /* 1GB system memory supposed */
+ uma_memory_size = 0;
+ uma_memory_base = 0;
#endif
- enable_onboard_nic();
- get_ide_dma66();
- set_thermal_config();
+ wait_pepp();
+ dev->ops->init = init; // rest of mainboard init later
}
+ /**
+ * @brief
+ *
+ * @param
+ */
+
int add_mainboard_resources(struct lb_memory *mem)
{
+ device_t dev;
+ struct resource *res;
+
+ dev = dev_find_slot(0, PCI_DEVFN(0,0));
+ res = probe_resource(dev, 0x1C);
+ if( res ) {
+ printk(BIOS_INFO, "mmconf: base=%0llx size=%0llx\n", res->base, res->size);
+ lb_add_memory_range(mem, LB_MEM_RESERVED, res->base, res->size);
+ }
/* UMA is removed from system memory in the northbridge code, but
* in some circumstances we want the memory mentioned as reserved.
*/
#if (CONFIG_GFXUMA == 1)
printk(BIOS_INFO, "uma_memory_base=0x%llx, uma_memory_size=0x%llx \n",
uma_memory_base, uma_memory_size);
- lb_add_memory_range(mem, LB_MEM_RESERVED,
- uma_memory_base, uma_memory_size);
+ lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, uma_memory_size);
#endif
return 0;
}
struct chip_operations mainboard_ops = {
- CHIP_NAME("AMD DBM690T Mainboard")
- .enable_dev = dbm690t_enable,
+ CHIP_NAME(CONFIG_MAINBOARD_PART_NUMBER)
+ .enable_dev = enable_dev,
};
Modified: trunk/src/mainboard/siemens/sitemp_g1p1/mptable.c
==============================================================================
--- trunk/src/mainboard/amd/dbm690t/mptable.c Tue May 10 23:53:13 2011 (r6565)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/mptable.c Wed May 11 09:47:43 2011 (r6567)
@@ -23,135 +23,50 @@
#include <arch/io.h>
#include <string.h>
#include <stdint.h>
+
#include <cpu/amd/amdk8_sysconf.h>
+extern u8 bus_isa;
extern u8 bus_rs690[8];
extern u8 bus_sb600[2];
extern u32 apicid_sb600;
+extern u32 bus_type[256];
extern u32 sbdn_rs690;
extern u32 sbdn_sb600;
static void *smp_write_config_table(void *v)
{
struct mp_config_table *mc;
- int bus_isa;
-
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
-
+ int isa_bus;
+
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
mptable_init(mc, LAPIC_ADDR);
-
smp_write_processors(mc);
get_bus_conf();
+ printk(BIOS_DEBUG, "%s: bus_isa=%d, apic_id=0x%x\n", __func__, bus_isa, apicid_sb600);
- mptable_write_buses(mc, NULL, &bus_isa);
-
+ mptable_write_buses(mc, NULL, &isa_bus);
+ if (isa_bus != bus_isa) {
+ printk(BIOS_ERR, "ISA bus numbering schemes differ! Please fix mptable.c\n");
+ }
/* I/O APICs: APIC ID Version State Address */
{
device_t dev;
- u32 dword;
- u8 byte;
- dev =
- dev_find_slot(bus_sb600[0],
- PCI_DEVFN(sbdn_sb600 + 0x14, 0));
+ dev = dev_find_slot(bus_sb600[0], PCI_DEVFN(sbdn_sb600 + 0x14, 0));
if (dev) {
- dword = pci_read_config32(dev, 0x74) & 0xfffffff0;
- smp_write_ioapic(mc, apicid_sb600, 0x11, dword);
-
- /* Initialize interrupt mapping */
- /* aza */
- byte = pci_read_config8(dev, 0x63);
- byte &= 0xf8;
- byte |= 0; /* 0: INTA, ...., 7: INTH */
- pci_write_config8(dev, 0x63, byte);
-
- /* SATA */
- dword = pci_read_config32(dev, 0xac);
- dword &= ~(7 << 26);
- dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */
- /* dword |= 1<<22; PIC and APIC co exists */
- pci_write_config32(dev, 0xac, dword);
-
- /*
- * 00:12.0: PROG SATA : INT F
- * 00:13.0: INTA USB_0
- * 00:13.1: INTB USB_1
- * 00:13.2: INTC USB_2
- * 00:13.3: INTD USB_3
- * 00:13.4: INTC USB_4
- * 00:13.5: INTD USB2
- * 00:14.1: INTA IDE
- * 00:14.2: Prog HDA : INT E
- * 00:14.5: INTB ACI
- * 00:14.6: INTB MCI
- */
+ struct resource *res;
+ res = find_resource(dev, 0x74);
+ smp_write_ioapic(mc, apicid_sb600, 0x20, res->base);
}
}
-
- /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
-#define IO_LOCAL_INT(type, intr, apicid, pin) \
- smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
-
mptable_add_isa_interrupts(mc, bus_isa, apicid_sb600, 0);
-
- /* PCI interrupts are level triggered, and are
- * associated with a specific bus/device/function tuple.
- */
-#if CONFIG_GENERATE_ACPI_TABLES == 0
-#define PCI_INT(bus, dev, fn, pin) \
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb600, (pin))
-#else
-#define PCI_INT(bus, dev, fn, pin)
-#endif
-
- /* usb */
- PCI_INT(0x0, 0x13, 0x0, 0x10);
- PCI_INT(0x0, 0x13, 0x1, 0x11);
- PCI_INT(0x0, 0x13, 0x2, 0x12);
- PCI_INT(0x0, 0x13, 0x3, 0x13);
-
- /* sata */
- PCI_INT(0x0, 0x12, 0x0, 0x16);
-
- /* HD Audio: b0:d20:f1:reg63 should be 0. */
- PCI_INT(0x0, 0x14, 0x0, 0x10);
-
- /* on board NIC & Slot PCIE. */
- PCI_INT(bus_rs690[1], 0x5, 0x0, 0x12);
- PCI_INT(bus_rs690[1], 0x5, 0x1, 0x13);
- PCI_INT(bus_rs690[2], 0x0, 0x0, 0x12);
- PCI_INT(bus_rs690[3], 0x0, 0x0, 0x13);
- PCI_INT(bus_rs690[4], 0x0, 0x0, 0x10);
- PCI_INT(bus_rs690[5], 0x0, 0x0, 0x11);
- PCI_INT(bus_rs690[6], 0x0, 0x0, 0x12);
- PCI_INT(bus_rs690[7], 0x0, 0x0, 0x13);
-
- /* PCI slots */
- /* PCI_SLOT 0. */
- PCI_INT(bus_sb600[1], 0x5, 0x0, 0x14);
- PCI_INT(bus_sb600[1], 0x5, 0x1, 0x15);
- PCI_INT(bus_sb600[1], 0x5, 0x2, 0x16);
- PCI_INT(bus_sb600[1], 0x5, 0x3, 0x17);
-
- /* PCI_SLOT 1. */
- PCI_INT(bus_sb600[1], 0x6, 0x0, 0x15);
- PCI_INT(bus_sb600[1], 0x6, 0x1, 0x16);
- PCI_INT(bus_sb600[1], 0x6, 0x2, 0x17);
- PCI_INT(bus_sb600[1], 0x6, 0x3, 0x14);
-
- /* PCI_SLOT 2. */
- PCI_INT(bus_sb600[1], 0x7, 0x0, 0x16);
- PCI_INT(bus_sb600[1], 0x7, 0x1, 0x17);
- PCI_INT(bus_sb600[1], 0x7, 0x2, 0x14);
- PCI_INT(bus_sb600[1], 0x7, 0x3, 0x15);
-
- /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
- IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0);
- IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1);
- /* There is no extension information... */
+ /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+ smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0);
+ smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1);
/* Compute the checksums */
mc->mpe_checksum =
@@ -162,9 +77,19 @@
return smp_next_mpe_entry(mc);
}
+static void fixup_virtual_wire(void *v)
+{
+ struct intel_mp_floating *mf = v;
+
+ mf->mpf_checksum = 0;
+ mf->mpf_feature2 = MP_FEATURE_VIRTUALWIRE;
+ mf->mpf_checksum = smp_compute_checksum(mf, mf->mpf_length*16);
+}
+
unsigned long write_smp_table(unsigned long addr)
{
void *v;
v = smp_write_floating_table(addr);
+ fixup_virtual_wire(v);
return (unsigned long)smp_write_config_table(v);
}
Modified: trunk/src/mainboard/siemens/sitemp_g1p1/resourcemap.c
==============================================================================
--- trunk/src/mainboard/amd/dbm690t/resourcemap.c Tue May 10 23:53:13 2011 (r6565)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/resourcemap.c Wed May 11 09:47:43 2011 (r6567)
@@ -17,7 +17,7 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-static void setup_dbm690t_resource_map(void)
+static void setup_sitemp_resource_map(void)
{
static const unsigned int register_values[] = {
/* Careful set limit registers before base registers which contain the enables */
Modified: trunk/src/mainboard/siemens/sitemp_g1p1/romstage.c
==============================================================================
--- trunk/src/mainboard/amd/dbm690t/romstage.c Tue May 10 23:53:13 2011 (r6565)
+++ trunk/src/mainboard/siemens/sitemp_g1p1/romstage.c Wed May 11 09:47:43 2011 (r6567)
@@ -2,6 +2,8 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2008 Advanced Micro Devices, Inc.
+ * Copyright (C) 2010 Siemens AG, Inc.
+ * (Written by Josef Kellermann <joseph.kellermann at heitec.de> for Siemens AG, Inc.)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -16,10 +18,14 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-
+
#define RC0 (6<<8)
#define RC1 (7<<8)
+#define DIMM0 0x50
+#define DIMM1 0x51
+
+#define ICS951462_ADDRESS 0x69
#define SMBUS_HUB 0x71
#include <stdint.h>
@@ -31,25 +37,36 @@
#include <cpu/x86/lapic.h>
#include <pc80/mc146818rtc.h>
#include <console/console.h>
+
#include <cpu/amd/model_fxx_rev.h>
#include "northbridge/amd/amdk8/raminit.h"
#include "cpu/amd/model_fxx/apic_timer.c"
#include "lib/delay.c"
+
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "superio/ite/it8712f/early_serial.c"
-#include <spd.h>
-#include <usbdebug.h>
+
#include "cpu/x86/mtrr/earlymtrr.c"
#include "cpu/x86/bist.h"
+
#include "northbridge/amd/amdk8/setup_resource_map.c"
+
#include "southbridge/amd/rs690/early_setup.c"
#include "southbridge/amd/sb600/early_setup.c"
#include "northbridge/amd/amdk8/debug.c" /* After sb600_early_setup.c! */
-static void memreset(int controllers, const struct mem_controller *ctrl) { }
-static void activate_spd_rom(const struct mem_controller *ctrl) { }
+/* CAN'T BE REMOVED! crt0.S will use it. I don't know WHY!*/
+static void memreset(int controllers, const struct mem_controller *ctrl)
+{
+}
+/* called in raminit_f.c */
+static inline void activate_spd_rom(const struct mem_controller *ctrl)
+{
+}
+
+/*called in raminit_f.c */
static inline int spd_read_byte(u32 device, u32 address)
{
return smbus_read_byte(device, address);
@@ -67,6 +84,135 @@
#include "cpu/amd/model_fxx/fidvid.c"
#include "northbridge/amd/amdk8/early_ht.c"
+#define __WARNING__(fmt, arg...) do_printk(BIOS_WARNING ,fmt, ##arg)
+#define __DEBUG__(fmt, arg...) do_printk(BIOS_DEBUG ,fmt, ##arg)
+#define __INFO__(fmt, arg...) do_printk(BIOS_INFO ,fmt, ##arg)
+
+#if CONFIG_USE_OPTION_TABLE
+#define DUMP_CMOS_RAM 0
+static inline int cmos_error(void) {
+ unsigned char reg_d;
+ /* See if the cmos error condition has been flagged */
+ outb(0xd, 0x72);
+ reg_d = inb(0x73);
+#if DUMP_CMOS_RAM
+ __DEBUG__("RTC_VRT = %x\n", reg_d & RTC_VRT);
+#endif
+ return (reg_d & RTC_VRT) == 0;
+}
+
+static inline void set_chksum(int range_start, int range_end, int cks_loc)
+{
+ int addr;
+ unsigned sum;
+ sum = 0;
+ for( addr = range_start; addr <= range_end; addr++) {
+ outb(addr, 0x72);
+ sum += inb(0x73);
+ }
+ sum = ~(sum & 0x0ffff);
+ outb(cks_loc, 0x72);
+ outb(((sum >> 8) & 0x0ff),0x73);
+ outb(cks_loc+1,0x72);
+ outb((sum & 0x0ff),0x73);
+}
+
+static inline int cmos_chksum_valid(void) {
+ unsigned char addr, val;
+ unsigned long sum, old_sum;
+
+#if DUMP_CMOS_RAM
+ u8 i;
+ /* Compute the cmos checksum */
+ for (addr = 14, i = 0; addr < LB_CKS_RANGE_START; addr++,i++) {
+ outb(addr, 0x72);
+ val = inb(0x73);
+ if( i%16 == 0 ) __DEBUG__("%02x:", addr);
+ __DEBUG__(" %02x",val);
+ if( i%16 == 15 ) __DEBUG__("\n");
+ }
+#endif
+ sum = 0;
+ for(addr = LB_CKS_RANGE_START; addr <= LB_CKS_RANGE_END; addr++) {
+ outb(addr, 0x72);
+ val = inb(0x73);
+#if DUMP_CMOS_RAM
+ if( i%16 == 0 ) __DEBUG__("%02x:", addr);
+ __DEBUG__(" %02x",val);
+ if( i%16 == 15 ) __DEBUG__("\n");
+ i++;
+#endif
+ sum += val;
+ }
+#if DUMP_CMOS_RAM
+ __DEBUG__("\n");
+#endif
+ sum = (sum & 0xffff) ^ 0xffff;
+
+ /* Read the stored checksum */
+ outb(LB_CKS_LOC, 0x72);
+ old_sum = inb(0x73) << 8;
+ outb(LB_CKS_LOC+1, 0x72);
+ old_sum |= inb(0x73);
+#if DUMP_CMOS_RAM
+ __DEBUG__("CMOS checksum: old = %lx, new = %lx\n", old_sum, sum);
+#endif
+ return sum == old_sum;
+}
+
+#include <cbfs.h>
+static inline void check_cmos( void ) {
+
+ char *cmos_default = NULL;
+ int i;
+#if DUMP_CMOS_RAM
+ u8 c = 0;
+#endif
+ if (cmos_error() || !cmos_chksum_valid()) {
+ cmos_default = cbfs_find_file("cmos.default", 0xaa);
+ if (cmos_default) {
+#if DUMP_CMOS_RAM
+ __DEBUG__("Write cmos default ...\n");
+#endif
+ outb(0x0a,0x72);
+ i = inb(0x73);
+ i &= ~(1 << 4);
+ outb(i,0x73);
+
+ for (i = 14; i < 128; i++) {
+#if DUMP_CMOS_RAM
+ if( c%16 == 0 ) __DEBUG__("%02x:", i);
+ __DEBUG__(" %02x", (u8)cmos_default[i]);
+ if( c%16 == 15 ) __DEBUG__("\n");
+ c++;
+#endif
+ outb(i,0x72);
+ outb(cmos_default[i],0x73);
+ }
+
+#if DUMP_CMOS_RAM
+ __DEBUG__("\n");
+#endif
+ if( !cmos_chksum_valid() )
+ __DEBUG__("CMOS CHECKSUM ERROR\n");
+ /* Now reboot to run with default cmos. */
+ outb(0x06, 0xcf9);
+ for (;;) asm("hlt"); /* Wait for reset! */
+ }
+ }
+
+ // update altcentury
+ outb(0x32, 0x72);
+ i = inb(0x73);
+ if ( i != 0x20 ) {
+ outb(0x20,0x73);
+ set_chksum(LB_CKS_RANGE_START, LB_CKS_RANGE_END, LB_CKS_LOC);
+ }
+
+}
+
+#endif
+
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
@@ -75,31 +221,41 @@
msr_t msr;
struct cpuid_result cpuid1;
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-
+
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
+
/* sb600_lpc_port80(); */
sb600_pci_port80();
}
- if (bist == 0)
+ if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
+ }
- enable_rs690_dev8();
+ enable_rs690_dev8(); // enable CFG access to Dev8, which is the SB P2P Bridge
sb600_lpc_init();
-
+#if defined(DUMP_CMOS_RAM) && (DUMP_CMOS_RAM == 0)
+ check_cmos(); // rebooting in case of corrupted cmos !!!!!
+#endif
/* it8712f_enable_serial does not use its 1st parameter. */
it8712f_enable_serial(0, CONFIG_TTYS0_BASE);
+ it8712f_kill_watchdog();
+ uart_init();
console_init();
-
+#if defined(DUMP_CMOS_RAM) && (DUMP_CMOS_RAM == 1)
+ check_cmos(); // rebooting in case of corrupted cmos !!!!!
+#endif
+ post_code(0x03);
+
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid);
+ __DEBUG__("bsp_apicid=0x%x\n", bsp_apicid);
- setup_dbm690t_resource_map();
+ setup_sitemp_resource_map();
setup_coherent_ht_domain();
@@ -115,14 +271,17 @@
/* run _early_setup before soft-reset. */
rs690_early_setup();
sb600_early_setup();
-
+
+ post_code(0x04);
+
/* Check to see if processor is capable of changing FIDVID */
/* otherwise it will throw a GP# when reading FIDVID_STATUS */
cpuid1 = cpuid(0x80000007);
- if ((cpuid1.edx & 0x6) == 0x6) {
+ if( (cpuid1.edx & 0x6) == 0x6 ) {
+
/* Read FIDVID_STATUS */
msr=rdmsr(0xc0010042);
- printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
+ __DEBUG__("begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
enable_fid_change();
enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
@@ -130,31 +289,47 @@
/* show final fid and vid */
msr=rdmsr(0xc0010042);
- printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
+ __DEBUG__("end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
+
} else {
- printk(BIOS_DEBUG, "Changing FIDVID not supported\n");
+ __DEBUG__("Changing FIDVID not supported\n");
}
-
+
+ post_code(0x05);
+
needs_reset = optimize_link_coherent_ht();
needs_reset |= optimize_link_incoherent_ht(sysinfo);
rs690_htinit();
- printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset);
-
+ __DEBUG__("needs_reset=0x%x\n", needs_reset);
+
+ post_code(0x06);
+
if (needs_reset) {
- print_info("ht reset -\n");
+ __INFO__("ht reset -\n");
soft_reset();
}
allow_all_aps_stop(bsp_apicid);
/* It's the time to set ctrl now; */
- printk(BIOS_DEBUG, "sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n",
+ __DEBUG__("sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n",
sysinfo->nodes, sysinfo->ctrl, spd_addr);
fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
+
+ post_code(0x07);
+
sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
-
- rs690_before_pci_init();
+
+ post_code(0x08);
+
+ rs690_before_pci_init(); // does nothing
sb600_before_pci_init();
+
+#if CONFIG_USE_OPTION_TABLE
+ if( read_option(CMOS_VSTART_cmos_defaults_loaded, CMOS_VLEN_cmos_defaults_loaded, 0) )
+ __WARNING__("WARNING: CMOS DEFAULTS LOADED. PLEASE CHECK CMOS OPTION \"cmos_default_loaded\" !\n");
+#endif
post_cache_as_ram();
}
+
More information about the coreboot
mailing list