[coreboot] New patch to review: d22355c ASRock E350M1: Configure SB800 GPP ports to support onboard pcie nic
Marshall Buschman (mbuschman@lucidmachines.com)
gerrit at coreboot.org
Sat Jun 18 19:09:32 CEST 2011
Marshall Buschman (mbuschman at lucidmachines.com) just uploaded a new patch set to gerrit, which you can find at
http://review.coreboot.org/44
-gerrit
commit d22355cefabca65598a37ef8e0438d89c382174d
Author: Scott Duplichan <scott at notabs.org>
Date: Sat Jun 18 10:46:45 2011 -0500
ASRock E350M1: Configure SB800 GPP ports to support onboard pcie nic
Scott Duplichan's patch from the mailing list:
sb800 cimx wrapper: Run the complete sb800 cimx sbBeforePciInit() function
once, after determining device 0x15 function enables.
1) Update the asrock e350m1 devicetree.cb to match the hardware.
2) Change the way the sb800 cimx wrapper code works. The original
cimx code calls sb800 cimx function sbBeforePciInit() once. When
ported to coreboot, the gpp component of this function was called
once for each gpp port, as the gpp port's enable/disable state
became known. A 05/15/2011 change makes the early gpp code run
only once, triggered by processing the 4th gpp port. This method
is not general enough because the 4th gpp port is not enabled on
all boards. With the current change, the early gpp code runs when
the first gpp port is processed. If any gpp ports are enabled, the
first must be enabled. Tested with Win7 and linux on asrock e350m1.
This change will also affect amd inagua, and has not been tested
on that board.
Change-Id: I93d44c216bfcab3c3a8fbb79d23dab43a65850e6
Signed-off-by: Scott Duplichan <scott at notabs.org>
Acked-by: Marshall Buschman <mbuschman at lucidmachines.com>
---
src/mainboard/asrock/e350m1/devicetree.cb | 14 +++++++++--
src/southbridge/amd/cimx_wrapper/sb800/late.c | 31 +++++++++----------------
2 files changed, 22 insertions(+), 23 deletions(-)
diff --git a/src/mainboard/asrock/e350m1/devicetree.cb b/src/mainboard/asrock/e350m1/devicetree.cb
index d1e4a8b..bc3bd18 100644
--- a/src/mainboard/asrock/e350m1/devicetree.cb
+++ b/src/mainboard/asrock/e350m1/devicetree.cb
@@ -99,11 +99,19 @@ chip northbridge/amd/agesa_wrapper/family14/root_complex
end #LPC
device pci 14.4 on end # PCI 0x4384
device pci 14.5 on end # USB 2
- device pci 15.0 off end # PCIe PortA
- device pci 15.1 off end # PCIe PortB
+ device pci 15.0 on end # PCIe PortA
+ device pci 15.1 on end # PCIe PortB
device pci 15.2 off end # PCIe PortC
device pci 15.3 off end # PCIe PortD
- register "gpp_configuration" = "0" #4:0:0:0 (really need to disable all 4 somehow)
+
+ # gpp_configuration options
+ #0000: PortA lanes[3:0]
+ #0001: N/A
+ #0010: PortA lanes[1:0], PortB lanes[3:2]
+ #0011: PortA lanes[1:0], PortB lane2, PortC lane3
+ #0100: PortA lane0, PortB lane1, PortC lane2, PortD lane3.
+ register "gpp_configuration" = "4"
+
register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE
end #southbridge/amd/cimx_wrapper/sb800
# end # device pci 18.0
diff --git a/src/southbridge/amd/cimx_wrapper/sb800/late.c b/src/southbridge/amd/cimx_wrapper/sb800/late.c
index 50eeb48..6926443 100644
--- a/src/southbridge/amd/cimx_wrapper/sb800/late.c
+++ b/src/southbridge/amd/cimx_wrapper/sb800/late.c
@@ -413,16 +413,13 @@ static void sb800_enable(device_t dev)
break;
case (0x15 << 3) | 0: /* 0:15:0 PCIe PortA */
- sb_config->PORTCONFIG[0].PortCfg.PortPresent = dev->enabled;
- return;
- case (0x15 << 3) | 1: /* 0:15:1 PCIe PortB */
- sb_config->PORTCONFIG[1].PortCfg.PortPresent = dev->enabled;
- return;
- case (0x15 << 3) | 2: /* 0:15:2 PCIe PortC */
- sb_config->PORTCONFIG[2].PortCfg.PortPresent = dev->enabled;
- return;
- case (0x15 << 3) | 3: /* 0:15:3 PCIe PortD */
- sb_config->PORTCONFIG[3].PortCfg.PortPresent = dev->enabled;
+ {
+ device_t device;
+ for (device = dev; device; device = device->next) {
+ if (dev->path.type != DEVICE_PATH_PCI) continue;
+ if ((device->path.pci.devfn & ~7) != PCI_DEVFN(0x15,0)) break;
+ sb_config->PORTCONFIG[device->path.pci.devfn & 3].PortCfg.PortPresent = device->enabled;
+ }
/*
* GPP_CFGMODE_X4000: PortA Lanes[3:0]
@@ -430,22 +427,16 @@ static void sb800_enable(device_t dev)
* GPP_CFGMODE_X2110: PortA Lanes[1:0], PortB Lane2, PortC Lane3
* GPP_CFGMODE_X1111: PortA Lanes0, PortB Lane1, PortC Lane2, PortD Lane3
*/
- if (sb_config->GppLinkConfig != sb_chip->gpp_configuration) {
- sb_config->GppLinkConfig = sb_chip->gpp_configuration;
- }
-
- sbPcieGppEarlyInit(sb_config);
+ sb_config->GppLinkConfig = sb_chip->gpp_configuration;
+ sb_config->StdHeader.Func = SB_BEFORE_PCI_INIT;
+ AmdSbDispatcher(sb_config);
break;
+ }
default:
break;
}
- /* Special setting ABCFG registers before PCI emulation. */
- abSpecialSetBeforePciEnum(sb_config);
- usbDesertPll(sb_config);
- //sb_config->StdHeader.Func = SB_BEFORE_PCI_INIT;
- //AmdSbDispatcher(sb_config);
}
struct chip_operations southbridge_amd_cimx_wrapper_sb800_ops = {
More information about the coreboot
mailing list