[coreboot] [commit] r6302 - in trunk/src/mainboard: getac/p470 kontron/986lcd-m roda/rk886ex

repository service svn at coreboot.org
Thu Jan 27 08:39:38 CET 2011


Author: oxygene
Date: Thu Jan 27 08:39:38 2011
New Revision: 6302
URL: https://tracker.coreboot.org/trac/coreboot/changeset/6302

Log:
Add a new CMOS variable which triggers activation of the
LPT port. With the CMOS variable set, LPT is found by SeaBIOS,
with the variable reset, it's not.

Signed-off-by: Patrick Georgi <patrick.georgi at secunet.com>
Acked-by: Stefan Reinauer <stefan.reinauer at coreboot.org>

Modified:
   trunk/src/mainboard/getac/p470/cmos.layout
   trunk/src/mainboard/getac/p470/devicetree.cb
   trunk/src/mainboard/getac/p470/romstage.c
   trunk/src/mainboard/kontron/986lcd-m/cmos.layout
   trunk/src/mainboard/kontron/986lcd-m/devicetree.cb
   trunk/src/mainboard/kontron/986lcd-m/romstage.c
   trunk/src/mainboard/roda/rk886ex/cmos.layout
   trunk/src/mainboard/roda/rk886ex/devicetree.cb
   trunk/src/mainboard/roda/rk886ex/romstage.c

Modified: trunk/src/mainboard/getac/p470/cmos.layout
==============================================================================
--- trunk/src/mainboard/getac/p470/cmos.layout	Thu Jan 27 04:31:50 2011	(r6301)
+++ trunk/src/mainboard/getac/p470/cmos.layout	Thu Jan 27 08:39:38 2011	(r6302)
@@ -93,7 +93,8 @@
 416        512       s       0        boot_devices
 928          8       h       0        boot_default
 936          1       e       8        cmos_defaults_loaded
-#937         47       r       0        unused
+937          1       e       1        lpt
+#938         46       r       0        unused
 
 # coreboot config options: check sums
 984         16       h       0        check_sum

Modified: trunk/src/mainboard/getac/p470/devicetree.cb
==============================================================================
--- trunk/src/mainboard/getac/p470/devicetree.cb	Thu Jan 27 04:31:50 2011	(r6301)
+++ trunk/src/mainboard/getac/p470/devicetree.cb	Thu Jan 27 08:39:38 2011	(r6302)
@@ -86,7 +86,9 @@
 					device pnp 2e.1 off		# ACPI PM
 					end
 					# 2e.2 does not exist
-					device pnp 2e.3 off		# Parallel port
+					device pnp 2e.3 on		# Parallel port
+						 io 0x60 = 0x378
+						irq 0x70 = 5
 					end
 					device pnp 2e.4 on		# COM1
                                                  io 0x60 = 0x3f8

Modified: trunk/src/mainboard/getac/p470/romstage.c
==============================================================================
--- trunk/src/mainboard/getac/p470/romstage.c	Thu Jan 27 04:31:50 2011	(r6301)
+++ trunk/src/mainboard/getac/p470/romstage.c	Thu Jan 27 08:39:38 2011	(r6302)
@@ -34,6 +34,7 @@
 #include "northbridge/intel/i945/i945.h"
 #include "northbridge/intel/i945/raminit.h"
 #include "southbridge/intel/i82801gx/i82801gx.h"
+#include "option_table.h"
 
 void setup_ich7_gpios(void)
 {
@@ -81,12 +82,16 @@
 
 static void ich7_enable_lpc(void)
 {
+	int lpt_en = 0;
+	if (read_option(CMOS_VSTART_lpt, CMOS_VLEN_lpt, 0) != 0) {
+	       lpt_en = 1<<2; // enable LPT
+	}
 	// Enable Serial IRQ
 	pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x64, 0xd0);
 	// decode range
 	pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0007);
 	// decode range
-	pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x3f0f);
+	pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x3f0b | lpt_en);
 	// Enable 0x02e0 - 0x2ff
 	pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x84, 0x001c02e1);
 	// Enable 0x600 - 0x6ff

Modified: trunk/src/mainboard/kontron/986lcd-m/cmos.layout
==============================================================================
--- trunk/src/mainboard/kontron/986lcd-m/cmos.layout	Thu Jan 27 04:31:50 2011	(r6301)
+++ trunk/src/mainboard/kontron/986lcd-m/cmos.layout	Thu Jan 27 08:39:38 2011	(r6302)
@@ -104,8 +104,9 @@
 968          1       e       2        ethernet1
 969          1       e       2        ethernet2
 970          1       e       2        ethernet3
+971          1       e       1        lpt
 
-#971          13       r       0        unused
+#972          12       r       0        unused
 
 # coreboot config options: check sums
 984         16       h       0        check_sum

Modified: trunk/src/mainboard/kontron/986lcd-m/devicetree.cb
==============================================================================
--- trunk/src/mainboard/kontron/986lcd-m/devicetree.cb	Thu Jan 27 04:31:50 2011	(r6301)
+++ trunk/src/mainboard/kontron/986lcd-m/devicetree.cb	Thu Jan 27 08:39:38 2011	(r6302)
@@ -52,7 +52,9 @@
                                 chip superio/winbond/w83627thg
 					device pnp 2e.0 off		# Floppy
 					end
-					device pnp 2e.1 off		# Parport
+					device pnp 2e.1 on		# Parallel port
+						 io 0x60 = 0x378
+						irq 0x70 = 5
 					end
                                         device pnp 2e.2 on
                                                  io 0x60 = 0x3f8

Modified: trunk/src/mainboard/kontron/986lcd-m/romstage.c
==============================================================================
--- trunk/src/mainboard/kontron/986lcd-m/romstage.c	Thu Jan 27 04:31:50 2011	(r6301)
+++ trunk/src/mainboard/kontron/986lcd-m/romstage.c	Thu Jan 27 08:39:38 2011	(r6302)
@@ -58,12 +58,16 @@
 
 static void ich7_enable_lpc(void)
 {
+	int lpt_en = 0;
+	if (read_option(CMOS_VSTART_lpt, CMOS_VLEN_lpt, 0) != 0) {
+		lpt_en = 1<<2; // enable LPT
+	}
 	// Enable Serial IRQ
 	pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x64, 0xd0);
 	// Set COM1/COM2 decode range
 	pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0010);
 	// Enable COM1/COM2/KBD/SuperIO1+2
-	pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x340b);
+	pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x340b | lpt_en);
 	// Enable HWM at 0xa00
 	pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x84, 0x00fc0a01);
 	// COM3 decode

Modified: trunk/src/mainboard/roda/rk886ex/cmos.layout
==============================================================================
--- trunk/src/mainboard/roda/rk886ex/cmos.layout	Thu Jan 27 04:31:50 2011	(r6301)
+++ trunk/src/mainboard/roda/rk886ex/cmos.layout	Thu Jan 27 08:39:38 2011	(r6302)
@@ -93,7 +93,8 @@
 416        512       s       0        boot_devices
 928          8       h       0        boot_default
 936          1       e       8        cmos_defaults_loaded
-#937         47       r       0        unused
+937          1       e       1        lpt
+#938         46       r       0        unused
 
 # coreboot config options: check sums
 984         16       h       0        check_sum

Modified: trunk/src/mainboard/roda/rk886ex/devicetree.cb
==============================================================================
--- trunk/src/mainboard/roda/rk886ex/devicetree.cb	Thu Jan 27 04:31:50 2011	(r6301)
+++ trunk/src/mainboard/roda/rk886ex/devicetree.cb	Thu Jan 27 08:39:38 2011	(r6302)
@@ -83,7 +83,9 @@
 			#device pci 1e.3 off end # AC'97 Modem
                         device pci 1f.0 on # LPC bridge
                                 chip superio/smsc/lpc47n227
-					device pnp 2e.1 off # Parallel port
+					device pnp 2e.1 on # Parallel port
+						 io 0x60 = 0x378
+						irq 0x70 = 5
 					end
 					device pnp 2e.2 on # COM1
                                                  io 0x60 = 0x3f8

Modified: trunk/src/mainboard/roda/rk886ex/romstage.c
==============================================================================
--- trunk/src/mainboard/roda/rk886ex/romstage.c	Thu Jan 27 04:31:50 2011	(r6301)
+++ trunk/src/mainboard/roda/rk886ex/romstage.c	Thu Jan 27 08:39:38 2011	(r6302)
@@ -36,6 +36,7 @@
 #include "northbridge/intel/i945/i945.h"
 #include "northbridge/intel/i945/raminit.h"
 #include "southbridge/intel/i82801gx/i82801gx.h"
+#include "option_table.h"
 
 void setup_ich7_gpios(void)
 {
@@ -68,12 +69,16 @@
 
 static void ich7_enable_lpc(void)
 {
+	int lpt_en = 0;
+	if (read_option(CMOS_VSTART_lpt, CMOS_VLEN_lpt, 0) != 0) {
+	       lpt_en = 1<<2; // enable LPT
+	}
 	// Enable Serial IRQ
 	pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x64, 0xd0);
 	// decode range
 	pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0007);
 	// decode range
-	pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x3f0f);
+	pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x3f0b | lpt_en);
 	// Enable 0x02e0
 	pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x84, 0x02e1);
 	pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x86, 0x001c);




More information about the coreboot mailing list