[coreboot] [PATCH] disabling microcode update
Rudolf Marek
r.marek at assembler.cz
Sun Feb 27 00:06:23 CET 2011
The 500MHz and 300MHz are valid HT frequencies
Table 59. Link Frequency Bit Field Encoding
[FreqExt, Link Frequency] Transmitter Clock Frequency
Encoding (MHz)
0_0000 200 (default)
0_0001 300
0_0010 400
0_0011 500
0_0100 600
0_0101 800
0_0110 1000
0_0111 1200*
0_1000 1400*
0_1001 1600*
0_1010 1800
0_1011 2000
0_1100 2200
0_1101 2400
0_1110 2600
0_1111 Vendor-Specific
1_0000 Reserved
1_0001 2800
1_0010 3000
1_0011 3200
1_0100 to 1_1111 Reserved
* These frequencies were defined in revision 2.00 of the specification but are
redefined electrically in revision 3.00. The presence of a Gen3
capability block indicates that a device implements the Gen3 electrical
behavior for
these frequencies. Gen1 and Gen3 devices are not interoperable at these
frequencies.
Check http://www.hypertransport.org/docs/twgdocs/HTC20051222-0046-0035.pdf
For details
Thanks,
Rudolf
More information about the coreboot
mailing list