[coreboot] build service results for r6382

[repository service]

Dear coreboot readers!

This is the automatic build system of coreboot.

The developer "sduplichan" checked in revision 6382 to
the coreboot repository. This caused the following 
changes:

Change Log:
Add support for the ASRock E350M1, an AMD family 14h Fusion board.
A video option rom must be added for UMA graphics support. It can
be extracted from the supplied UEFI BIOS.

ASRock E350M1 support is based on the AMD persimmon project. The
major differences are SIO model and DIMM SDP addressing. With this
coreboot and seabios, the board can boot DOS from a SATA drive and
can boot WinPE from a USB flash drive. I was unable to get
Windows setup to run.

The board has a socketed SPI flash BIOS chip and a serial port
header. The SIO is Nuvoton NCT5572D. Using coreboot's existing
Winbond w83627hf is a good enough match to get the serial port
and keyboard working.

Signed-off-by: Scott Duplichan <scott at notabs.org>
Acked-by: Peter Stuge <peter at stuge.se>
Acked-by: Stefan Reinauer <stefan.reinauer at coreboot.org>



Build Log:
Compilation of asrock:939a785gmh has been broken
See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=6382&device=939a785gmh&vendor=asrock&num=2


If something broke during this checkin please be a pain 
in sduplichan's neck until the issue is fixed.

If this issue is not fixed within 24h the revision should 
be backed out.

   Best regards,
     coreboot automatic build system