[coreboot] 870 attempt

Alex G. mr.nuke.me at gmail.com
Thu Feb 24 09:14:15 CET 2011


On 02/24/2011 04:14 AM, Jonathan A. Kollasch wrote:
> Hi,
> 
> I've attempted to use the rs780 and sb800 code on a AM3 870 + SB850
> board.  Raminit seems to go okay, as does the first bits of ramstage.
> However, ramstage fails after the first two passes through
> rs780_enable().  It stalls in get_vid_did() reading PCI config space
> of device 2 (or 4).  Also, the rs780 HT init code thinks the link should
> run at 200MHz, maybe that's related.
> 
> I'm aware that this code wasn't exactly intended for the 870,
> but maybe someone has some hints of what to try next.
> 
Output output output output from the serial port. Please. :)

Alex




More information about the coreboot mailing list