[coreboot] HP Proliant dl145 g3 Can't read Boot disk

[Alex G.]

On 02/22/2011 01:45 AM, Kevin O'Connor wrote:
> Thanks.  The lspci shows:
> 
> 01:0e.0 RAID bus controller: Broadcom BCM5785 [HT1000] SATA (Native SATA Mode) (prog-if 05)
> 
> So, the device doesn't use a standard class code.  Does anyone know if
> it accepts standard ATA or AHCI commands?  If so, SeaBIOS could be
> hardcoded to try and use the device.
> 
Can't we just change the class in the init code? I guess we'd need the
datasheet to tell if the bits are RW, or RO.

Alex