[coreboot] Asus M4A78LT-M status
Christian Ruppert
idl0r at qasl.de
Mon Dec 19 18:31:10 CET 2011
Ok, little status update...
On Sunday 18 December 2011 23:03:50 Christian Ruppert wrote:
> Hi guys,
>
> I currently try to get coreboot working on my "Asus M4A78LT-M".
> Using the M4A785T-M [1] as template works fine so far as the hardware is
> almost equal but there are a few issues:
>
> a)
> My RAM sticks [2] (tried both separate) doesn't work (see serial-ram-
> fail.txt).
> It is present but not valid, it seems the CRC check fails in
> src/northbridge/amd/amdmct/mct_ddr3/mct_d.c and I have no idea why...
>
> My other RAM sticks [3] (only one tested) seem to work (see serial-ram-
> works.txt)
>
> Do you guys have any ideas why the other sticks do not work?
>
> b) Neither the NVIDIA (ZOTAC GeForce 210 Synergy Edition 512MB) PCIe card
> nor the on-board ATI Radeon HD 3000 works.
> I tried to extract the VGA bios of the on-board card by using the
> bios_extract script mentioned at [4] as well as Peter's shell command
> mentioned at [5]. bios_extract doesn't seem to find the VGA bios, at least
> the PCI IDs doesn't match.
> I get amipci_1002_4392.rom, amipci_1002_FFF1.rom and amipci_1002_FFF2.rom
> but the PCI ID of the on-board ATI card is: 1002:9616.
> So I tried Peter's command and that seems to work at least partially. I do
> get some strange stuff on the screen incl. a flashing cursor but that's
> it...
>
> So I'd like to know how to get the PCIe card working at least (which is
> totally enough for me or resp. exactly what I want).
> The on-board one would be only interesting for my Wiki article, so for
> others.
>
Now (thank GRUB2) that I am able to boot with coreboot/SeaBIOS I noticed that
the NVIDIA PCIe card is *not* listed by lspci at all. The onboard card is
listed.
> c)
> Not sure if I just misunderstood something.. I have GRUB 1 / legacy
> installed on my disk and SeaBIOS tries to load GRUB but then it freezes.
> From what I've read only GRUB 2 is supported as *payload*. Does it also
> apply to GRUB on a disk?
>
So #c has been solved. Booting with GRUB2 works fine. :)
> d)
> Using the microcode update stuff results into some strange boot issues (see
> serial-microcode_fail.txt, note the "rscp7u80S_eetAaMrDlyM_SsRe tup()") and
> freezes.
> Is it a known issue? Any workarounds?
> Even "Juhe" (the author of the M4A785T-M [1] article mentioned that..
> In my case it is a AMD Athlon II X2 245e.
>
>
> So as you can see in serial-ram-works.txt it's almost working. I guess it'll
> boot "fine" if you guys are able to help me with the issues above. If you
> (like me) prefer IRC then just poke me (idl0r) and I'll post any
> successfully results either here or on the Wiki article later.
>
> [1] http://www.coreboot.org/ASUS_M4A785T-M
> [2] http://www.gskill.com/products.php?index=223
> [3] http://www.gskill.com/products.php?index=243
> [4]
> http://www.coreboot.org/VGA_support#RECOMMENDED:_Extracting_from_your_vendor
> _bios_image [5]
> http://www.coreboot.org/VGA_support#Extracting_from_the_system_.28if_everyth
> ing_else_fails.29
Unfortunately there are other issues that I noticed during the first boot.
e)
The processor P-States are somewhat incomplete.
vendor BIOS:
# dmesg|grep power
[ 1.901172] powernow-k8: Found 1 AMD Athlon(tm) II X2 245e Processor (2 cpu
cores) (version 2.20.00)
[ 1.911453] powernow-k8: 0 : pstate 0 (2900 MHz)
[ 1.917517] powernow-k8: 1 : pstate 1 (2100 MHz)
[ 1.923502] powernow-k8: 2 : pstate 2 (1500 MHz)
[ 1.929473] powernow-k8: 3 : pstate 3 (800 MHz)
coreboot:
# grep powernow dmesg.coreboot
[ 1.846464] powernow-k8: Found 1 AMD Athlon(tm) II X2 245e Processor (2 cpu
cores) (version 2.20.00)
[ 1.855605] powernow-k8: 0 : pstate 0 (2900 MHz)
[ 1.860482] powernow-k8: 1 : pstate 1 (2100 MHz)
f)
As mentioned by "Juhe" the snd-hda-intel module crashes thus a kernel panic...
See attachment snd-hda-intel-panic.txt.
I also attached the dmesg and dmidecode output of the first *sucessfull* boot.
--
Regards,
Christian Ruppert
-------------- next part --------------
# modprobe snd-hda-intel
[ 298.777045] BUG: unable to handle kernel NULL pointer dereference at 0000000000000128
[ 298.778025] IP: [<ffffffffa02e4201>] snd_hda_queue_unsol_event+0x1/0x50 [snd_hda_codec]
[ 298.790997] PGD 6c1db067 PUD 6c15f067 PMD 0
[ 298.790997] Oops: 0000 [#1] SMP
[ 298.790997] CPU 1
[ 298.790997] Modules linked in: snd_hda_intel(+) snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_seq snd_timer snd_seq_device snd soundcore usbhid rc_imon_pad imon ir_lirc_codec lirc_dev ir_mce_kbd_decoder ir_sony_decoder ir_jvc_dec3
[ 298.826866]
[ 298.826866] Pid: 0, comm: kworker/0:0 Tainted: P 3.1.5-gentoo #8 ASUS M4A78LT-M
[ 298.826866] RIP: 0010:[<ffffffffa02e4201>] [<ffffffffa02e4201>] snd_hda_queue_unsol_event+0x1/0x50 [snd_hda_codec]
[ 298.826866] RSP: 0018:ffff88006fd03e38 EFLAGS: 00010002
[ 298.826866] RAX: 0000000000000002 RBX: ffff88006cbc4000 RCX: ffff88006abd6800
[ 298.826866] RDX: 0000000000000012 RSI: 00000000ffffffff RDI: 0000000000000000
[ 298.826866] RBP: ffff88006fd03e68 R08: 0000000000000001 R09: 0000000000000008
[ 298.826866] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
[ 298.826866] R13: 0000000000000000 R14: 00000000c0000000 R15: 000000000000001c
[ 298.826866] FS: 00007eff504f2700(0000) GS:ffff88006fd00000(0000) knlGS:0000000000000000
[ 298.826866] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 298.826866] CR2: 0000000000000128 CR3: 0000000061a8c000 CR4: 00000000000006e0
[ 298.826866] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 298.826866] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 298.826866] Process kworker/0:0 (pid: 0, threadinfo ffff88006d498000, task ffff88006d44c100)
[ 298.826866] Stack:
[ 298.826866] ffff88006fd03e68 ffffffffa02f87fc 0000000000000286 ffff88006cbc7780
[ 298.826866] 0000000000000008 ffff88006cbc4000 ffff88006fd03eb8 ffffffffa02f88f7
[ 298.826866] ffff88006cbc4218 ffff88006cbc4044 0000000000000000 ffff88006c344500
[ 298.826866] Call Trace:
[ 298.826866] <IRQ>
[ 298.826866] [<ffffffffa02f87fc>] ? azx_update_rirb+0xbc/0xe0 [snd_hda_intel]
[ 298.826866] [<ffffffffa02f88f7>] azx_interrupt+0xd7/0x190 [snd_hda_intel]
[ 298.826866] [<ffffffff81093d85>] handle_irq_event_percpu+0x55/0x1f0
[ 298.826866] [<ffffffff81093f57>] handle_irq_event+0x37/0x60
[ 298.826866] [<ffffffff81096514>] handle_fasteoi_irq+0x54/0xd0
[ 298.826866] [<ffffffff8100404d>] handle_irq+0x1d/0x30
[ 298.826866] [<ffffffff81003ce8>] do_IRQ+0x58/0xe0
[ 298.826866] [<ffffffff8142ea2b>] common_interrupt+0x6b/0x6b
[ 298.826866] <EOI>
[ 298.826866] [<ffffffff8106fbd1>] ? tick_nohz_stop_sched_tick+0x281/0x3c0
[ 298.826866] [<ffffffff81000ac9>] cpu_idle+0x79/0x100
[ 298.826866] [<ffffffff8142770a>] start_secondary+0x23c/0x243
[ 298.826866] Code: c4 48 8d 58 f0 74 18 0f 1f 00 48 89 df e8 a8 6c 00 00 48 8b 43 10 49 39 c4 48 8d 58 f0 75 eb 5b 31 c0 41 5c c9 c3 0f 1f 40 00 55
[ 298.826866] 8b 87 28 01 00 00 48 89 e5 48 85 c0 74 34 8b 88 04 02 00 00
[ 298.826866] RIP [<ffffffffa02e4201>] snd_hda_queue_unsol_event+0x1/0x50 [snd_hda_codec]
[ 298.826866] RSP <ffff88006fd03e38>
[ 298.826866] CR2: 0000000000000128
[ 298.826866] ---[ end trace 9dd4667e4fe161ce ]---
[ 298.826866] Kernel panic - not syncing: Fatal exception in interrupt
[ 298.826866] Pid: 0, comm: kworker/0:0 Tainted: P D 3.1.5-gentoo #8
[ 298.826866] Call Trace:
[ 298.826866] <IRQ> [<ffffffff8142bdd6>] panic+0x8c/0x193
[ 298.826866] [<ffffffff81005639>] oops_end+0x99/0xa0
[ 298.826866] [<ffffffff81024a30>] no_context+0xf0/0x260
[ 298.826866] [<ffffffff81024cbd>] __bad_area_nosemaphore+0x11d/0x200
[ 298.826866] [<ffffffff81024dae>] bad_area_nosemaphore+0xe/0x10
[ 298.826866] [<ffffffff810252dc>] do_page_fault+0x2ac/0x430
[ 298.826866] [<ffffffff81037429>] ? load_balance+0x99/0x780
[ 298.826866] [<ffffffff81065e7d>] ? sched_clock_local+0x1d/0x90
[ 298.826866] [<ffffffff8142ec2f>] page_fault+0x1f/0x30
[ 298.826866] [<ffffffffa02e4201>] ? snd_hda_queue_unsol_event+0x1/0x50 [snd_hda_codec]
[ 298.826866] [<ffffffffa02f87fc>] ? azx_update_rirb+0xbc/0xe0 [snd_hda_intel]
[ 298.826866] [<ffffffffa02f88f7>] azx_interrupt+0xd7/0x190 [snd_hda_intel]
[ 298.826866] [<ffffffff81093d85>] handle_irq_event_percpu+0x55/0x1f0
[ 298.826866] [<ffffffff81093f57>] handle_irq_event+0x37/0x60
[ 298.826866] [<ffffffff81096514>] handle_fasteoi_irq+0x54/0xd0
[ 298.826866] [<ffffffff8100404d>] handle_irq+0x1d/0x30
[ 298.826866] [<ffffffff81003ce8>] do_IRQ+0x58/0xe0
[ 299.209351] [<ffffffff8142ea2b>] common_interrupt+0x6b/0x6b
[ 299.209351] <EOI> [<ffffffff8106fbd1>] ? tick_nohz_stop_sched_tick+0x281/0x3c0
[ 299.209351] [<ffffffff81000ac9>] cpu_idle+0x79/0x100
[ 299.209351] [<ffffffff8142770a>] start_secondary+0x23c/0x243
-------------- next part --------------
# dmidecode 2.10
SMBIOS 2.7 present.
6 structures occupying 250 bytes.
Table at 0x6FFFD820.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: coreboot
Version: 4.0-1914-g66ebaa9-dirty
Release Date: 12/19/2011
ROM Size: 1024 kB
Characteristics:
PCI is supported
PC Card (PCMCIA) is supported
BIOS is upgradeable
Selectable boot is supported
ACPI is supported
Targeted content distribution is supported
BIOS Revision: 4.0
Firmware Revision: 0.0
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: ASUS
Product Name: M4A78LT-M
Version: Not Specified
Serial Number: Not Specified
UUID: Not Settable
Wake-up Type: Reserved
SKU Number: Not Specified
Family: Not Specified
Handle 0x0002, DMI type 3, 21 bytes
Chassis Information
Manufacturer: ASUS
Type: Desktop
Lock: Not Present
Version: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Height: Unspecified
Number Of Power Cords: Unspecified
Contained Elements: 0
Handle 0x0003, DMI type 4, 42 bytes
Processor Information
Socket Designation: Not Specified
Type: Central Processor
Family: Pentium Pro
Manufacturer: AuthenticAMD
ID: 63 0F 10 00 FF FB 8B 17
Signature: Type 0, Family 16, Model 6, Stepping 3
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
HTT (Hyper-threading technology)
Version: AMD Athlon(tm) II X2 245e Processor
Voltage: Unknown
External Clock: Unknown
Max Speed: Unknown
Current Speed: Unknown
Status: Unpopulated
Upgrade: Other
L1 Cache Handle: Not Provided
L2 Cache Handle: Not Provided
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Core Count: 2
Characteristics: None
Handle 0x0004, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x0005, DMI type 127, 4 bytes
End Of Table
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.5-gentoo (root at urd) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #8 SMP Mon Dec 12 22:01:19 CET 2011
[ 0.000000] Command line: BOOT_IMAGE=/kernel-3.1.5-gentoo root=/dev/sda3 ro video=uvesafb:1280x800-32,mtrr:3,ywrap console=ttyS0,115200 console=tty0
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000006fff0000 (usable)
[ 0.000000] BIOS-e820: 000000006fff0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: ASUS M4A78LT-M, BIOS 4.0-1914-g66ebaa9-dirty 12/19/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x6fff0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000070000000 mask FFFFF0000000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-000000006fff0000
[ 0.000000] 0000000000 - 0040000000 page 1G
[ 0.000000] 0040000000 - 006fe00000 page 2M
[ 0.000000] 006fe00000 - 006fff0000 page 4k
[ 0.000000] kernel direct mapping tables up to 6fff0000 @ 1fffd000-20000000
[ 0.000000] ACPI: RSDP 00000000000fd960 00014 (v00 CORE )
[ 0.000000] ACPI: RSDT 000000006fff2424 0003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 000000006fff24c8 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 000000006fff2500 0005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SRAT 000000006fff2560 000A0 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SLIT 000000006fff2600 0002D (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 000000006fff2630 00635 (v01 AMD-FA AMD-ACPI 06040000 INTL 20110922)
[ 0.000000] ACPI: FACP 000000006fff5638 000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 000000006fff2c68 0298C (v02 ASUS M4A78LT- 00010001 INTL 20110922)
[ 0.000000] ACPI: FACS 000000006fff55f8 00040
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88006da00000-ffff88006f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0006fff0
[ 0.000000] On node 0 totalpages: 458623
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7104 pages used for memmap
[ 0.000000] DMA32 zone: 447536 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x818
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x102282a0 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] setup_percpu: NR_CPUS:5 nr_cpumask_bits:5 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88006fc00000 s73280 r8192 d20928 u1048576
[ 0.000000] pcpu-alloc: s73280 r8192 d20928 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 451450
[ 0.000000] Kernel command line: BOOT_IMAGE=/kernel-3.1.5-gentoo root=/dev/sda3 ro video=uvesafb:1280x800-32,mtrr:3,ywrap console=ttyS0,115200 console=tty0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ dc000000 size 64 MB
[ 0.000000] Memory: 1794872k/1834944k available (4299k kernel code, 452k absent, 39620k reserved, 1909k data, 572k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:416
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2907.439 MHz processor.
[ 0.003002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5814.87 BogoMIPS (lpj=2907439)
[ 0.005002] pid_max: default: 32768 minimum: 301
[ 0.006041] Mount-cache hash table entries: 256
[ 0.007124] Initializing cgroup subsys cpuacct
[ 0.008007] Initializing cgroup subsys devices
[ 0.009002] Initializing cgroup subsys freezer
[ 0.010019] tseg: 0000000000
[ 0.010026] CPU: Physical Processor ID: 0
[ 0.011002] CPU: Processor Core ID: 0
[ 0.012001] mce: CPU supports 6 MCE banks
[ 0.013036] ACPI: Core revision 20110623
[ 0.016172] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.027168] CPU0: AMD Athlon(tm) II X2 245e Processor stepping 03
[ 0.030997] Performance Events: AMD PMU driver.
[ 0.031999] ... version: 0
[ 0.032998] ... bit width: 48
[ 0.033998] ... generic registers: 4
[ 0.034998] ... value mask: 0000ffffffffffff
[ 0.035998] ... max period: 00007fffffffffff
[ 0.036998] ... fixed-purpose events: 0
[ 0.037998] ... event mask: 000000000000000f
[ 0.039095] MCE: In-kernel MCE decoding enabled.
[ 0.040046] Booting Node 0, Processors #1 Ok.
[ 0.041799] smpboot cpu 1: start_ip = 9a000
[ 0.112993] Brought up 2 CPUs
[ 0.113991] Total of 2 processors activated (11629.04 BogoMIPS).
[ 0.115340] RTC time: 17:38:02, date: 12/19/11
[ 0.120023] NET: Registered protocol family 16
[ 0.124018] node 0 link 0: io port [1000, 3fff]
[ 0.124018] TOM: 0000000080000000 aka 2048M
[ 0.128990] Fam 10h mmconf [e0000000, efffffff]
[ 0.128992] node 0 link 0: mmio [d4000000, d83fffff]
[ 0.128994] node 0 link 0: mmio [c0000000, d01fffff]
[ 0.128996] bus: [00, 03] on node 0 link 0
[ 0.128998] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.128999] bus: 00 index 1 [mem 0xd0200000-0xdfffffff]
[ 0.129001] bus: 00 index 2 [mem 0x80000000-0xd01fffff]
[ 0.129002] bus: 00 index 3 [mem 0xf0000000-0xfcffffffff]
[ 0.129015] Extended Config Space enabled on 1 nodes
[ 0.134015] ACPI: bus type pci registered
[ 0.138013] PCI: Using configuration type 1 for base access
[ 0.142989] PCI: Using configuration type 1 for extended access
[ 0.148999] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.154986] mtrr: probably your BIOS does not setup all CPUs.
[ 0.160984] mtrr: corrected configuration.
[ 0.167009] bio: create slab <bio-0> at 0
[ 0.172004] ACPI: Added _OSI(Module Device)
[ 0.172984] ACPI: Added _OSI(Processor Device)
[ 0.173983] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.174983] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.177230] ACPI: EC: Look up EC in DSDT
[ 0.177631] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.180569] ACPI: Interpreter enabled
[ 0.180983] ACPI: (supports S0 S1 S2 S3 S5)
[ 0.183266] ACPI: BIOS offers _BFS
[ 0.183981] ACPI: If "acpi.bfs=1" improves resume, please notify linux-acpi at vger.kernel.org
[ 0.184981] ACPI: Using IOAPIC for interrupt routing
[ 0.191024] ACPI: Power Resource [PFN0] (on)
[ 0.192031] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.193057] ACPI Error: [TOM2] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 0.195980] ACPI Error: Method parse/execution failed [\_SB_.PCI0._CRS] (Node ffff88006d430d70), AE_NOT_FOUND (20110623/psparse-536)
[ 0.200982] [Firmware Bug]: ACPI: no secondary bus range in _CRS
[ 0.201984] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.203025] ACPI Error: [TOM2] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 0.206978] ACPI Error: Method parse/execution failed [\_SB_.PCI0._CRS] (Node ffff88006d430d70), AE_NOT_FOUND (20110623/psparse-536)
[ 0.211997] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600
[ 0.212081] pci 0000:00:01.0: [1022:9602] type 1 class 0x000604
[ 0.212993] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
[ 0.213044] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.213047] pci 0000:00:0a.0: PME# disabled
[ 0.213088] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 0.213115] pci 0000:00:11.0: reg 10: [io 0x3020-0x3027]
[ 0.213128] pci 0000:00:11.0: reg 14: [io 0x3040-0x3043]
[ 0.213141] pci 0000:00:11.0: reg 18: [io 0x3028-0x302f]
[ 0.213154] pci 0000:00:11.0: reg 1c: [io 0x3044-0x3047]
[ 0.213167] pci 0000:00:11.0: reg 20: [io 0x3000-0x300f]
[ 0.213180] pci 0000:00:11.0: reg 24: [mem 0xd8309000-0xd83093ff]
[ 0.213208] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.214028] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.214046] pci 0000:00:12.0: reg 10: [mem 0xd8304000-0xd8304fff]
[ 0.214133] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.214151] pci 0000:00:12.1: reg 10: [mem 0xd8305000-0xd8305fff]
[ 0.214247] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.214273] pci 0000:00:12.2: reg 10: [mem 0xd8309400-0xd83094ff]
[ 0.214372] pci 0000:00:12.2: supports D1 D2
[ 0.214374] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.214378] pci 0000:00:12.2: PME# disabled
[ 0.214406] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.214424] pci 0000:00:13.0: reg 10: [mem 0xd8306000-0xd8306fff]
[ 0.214512] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.214530] pci 0000:00:13.1: reg 10: [mem 0xd8307000-0xd8307fff]
[ 0.214625] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.214651] pci 0000:00:13.2: reg 10: [mem 0xd8309500-0xd83095ff]
[ 0.214750] pci 0000:00:13.2: supports D1 D2
[ 0.214751] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.214756] pci 0000:00:13.2: PME# disabled
[ 0.214788] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.215014] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.215032] pci 0000:00:14.1: reg 10: [io 0x3030-0x3037]
[ 0.215045] pci 0000:00:14.1: reg 14: [io 0x3048-0x304b]
[ 0.215057] pci 0000:00:14.1: reg 18: [io 0x3038-0x303f]
[ 0.215070] pci 0000:00:14.1: reg 1c: [io 0x304c-0x304f]
[ 0.215083] pci 0000:00:14.1: reg 20: [io 0x3010-0x301f]
[ 0.215133] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.215162] pci 0000:00:14.2: reg 10: [mem 0xd8300000-0xd8303fff 64bit]
[ 0.215243] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.215248] pci 0000:00:14.2: PME# disabled
[ 0.215264] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.215367] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.215422] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.215440] pci 0000:00:14.5: reg 10: [mem 0xd8308000-0xd8308fff]
[ 0.215531] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.215542] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.215552] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.215562] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.215575] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.215638] pci 0000:01:05.0: [1002:9616] type 0 class 0x000300
[ 0.215654] pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.215663] pci 0000:01:05.0: reg 14: [io 0x1000-0x10ff]
[ 0.215671] pci 0000:01:05.0: reg 18: [mem 0xd8100000-0xd810ffff]
[ 0.215692] pci 0000:01:05.0: reg 24: [mem 0xd8000000-0xd80fffff]
[ 0.215718] pci 0000:01:05.0: supports D1 D2
[ 0.215737] pci 0000:01:05.1: [1002:960f] type 0 class 0x000403
[ 0.215753] pci 0000:01:05.1: reg 10: [mem 0xd8110000-0xd8113fff]
[ 0.215812] pci 0000:01:05.1: supports D1 D2
[ 0.215868] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.215980] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
[ 0.215984] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xd81fffff]
[ 0.215989] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.216053] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.216071] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.216100] pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.216119] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.216132] pci 0000:02:00.0: reg 30: [mem 0xd8200000-0xd820ffff pref]
[ 0.216172] pci 0000:02:00.0: supports D1 D2
[ 0.216174] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.216178] pci 0000:02:00.0: PME# disabled
[ 0.217989] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.218980] pci 0000:00:0a.0: bridge window [io 0x2000-0x2fff]
[ 0.218984] pci 0000:00:0a.0: bridge window [mem 0xd8200000-0xd82fffff]
[ 0.218989] pci 0000:00:0a.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.219026] pci 0000:03:06.0: [1822:4e35] type 0 class 0x000480
[ 0.219047] pci 0000:03:06.0: reg 10: [mem 0xd0100000-0xd0100fff pref]
[ 0.219193] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.219986] pci 0000:00:14.4: bridge window [mem 0xd0100000-0xd01fffff pref]
[ 0.220003] pci_bus 0000:00: on NUMA node 0
[ 0.220005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.220052] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 0.220071] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBRA._PRT]
[ 0.220088] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PIBR._PRT]
[ 0.220141] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.220977] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.221976] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.226994] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.232002] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.237003] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.241999] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.247197] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.252195] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled.
[ 0.255195] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.259191] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.263184] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.263971] vgaarb: loaded
[ 0.264969] vgaarb: bridge control possible 0000:01:05.0
[ 0.266016] SCSI subsystem initialized
[ 0.266984] libata version 3.00 loaded.
[ 0.266987] PCI: Using ACPI for IRQ routing
[ 0.267974] PCI: pci_cache_line_size set to 64 bytes
[ 0.267977] pci 0000:00:01.0: no compatible bridge window for [io 0x1000-0x1fff]
[ 0.268969] pci 0000:00:01.0: no compatible bridge window for [mem 0xd8000000-0xd81fffff]
[ 0.269969] pci 0000:00:01.0: no compatible bridge window for [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.270969] pci 0000:00:0a.0: no compatible bridge window for [io 0x2000-0x2fff]
[ 0.271969] pci 0000:00:0a.0: no compatible bridge window for [mem 0xd8200000-0xd82fffff]
[ 0.272969] pci 0000:00:0a.0: no compatible bridge window for [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.273968] pci 0000:00:14.4: no compatible bridge window for [mem 0xd0100000-0xd01fffff pref]
[ 0.274975] pci 0000:00:11.0: no compatible bridge window for [io 0x3020-0x3027]
[ 0.275975] pci 0000:00:11.0: no compatible bridge window for [io 0x3040-0x3043]
[ 0.276968] pci 0000:00:11.0: no compatible bridge window for [io 0x3028-0x302f]
[ 0.277968] pci 0000:00:11.0: no compatible bridge window for [io 0x3044-0x3047]
[ 0.278967] pci 0000:00:11.0: no compatible bridge window for [io 0x3000-0x300f]
[ 0.279968] pci 0000:00:11.0: no compatible bridge window for [mem 0xd8309000-0xd83093ff]
[ 0.280970] pci 0000:00:12.0: no compatible bridge window for [mem 0xd8304000-0xd8304fff]
[ 0.281970] pci 0000:00:12.1: no compatible bridge window for [mem 0xd8305000-0xd8305fff]
[ 0.282969] pci 0000:00:12.2: no compatible bridge window for [mem 0xd8309400-0xd83094ff]
[ 0.283969] pci 0000:00:13.0: no compatible bridge window for [mem 0xd8306000-0xd8306fff]
[ 0.284969] pci 0000:00:13.1: no compatible bridge window for [mem 0xd8307000-0xd8307fff]
[ 0.285969] pci 0000:00:13.2: no compatible bridge window for [mem 0xd8309500-0xd83095ff]
[ 0.286970] pci 0000:00:14.1: no compatible bridge window for [io 0x01f0-0x01f7]
[ 0.287966] pci 0000:00:14.1: no compatible bridge window for [io 0x03f6]
[ 0.288966] pci 0000:00:14.1: no compatible bridge window for [io 0x0170-0x0177]
[ 0.289966] pci 0000:00:14.1: no compatible bridge window for [io 0x0376]
[ 0.290966] pci 0000:00:14.1: no compatible bridge window for [io 0x3010-0x301f]
[ 0.291968] pci 0000:00:14.2: no compatible bridge window for [mem 0xd8300000-0xd8303fff 64bit]
[ 0.292972] pci 0000:00:14.5: no compatible bridge window for [mem 0xd8308000-0xd8308fff]
[ 0.293970] pci 0000:01:05.0: no compatible bridge window for [mem 0xc0000000-0xcfffffff pref]
[ 0.294965] pci 0000:01:05.0: no compatible bridge window for [io 0x1000-0x10ff]
[ 0.295965] pci 0000:01:05.0: no compatible bridge window for [mem 0xd8100000-0xd810ffff]
[ 0.296965] pci 0000:01:05.0: no compatible bridge window for [mem 0xd8000000-0xd80fffff]
[ 0.297966] pci 0000:01:05.1: no compatible bridge window for [mem 0xd8110000-0xd8113fff]
[ 0.298966] pci 0000:02:00.0: no compatible bridge window for [io 0x2000-0x20ff]
[ 0.299965] pci 0000:02:00.0: no compatible bridge window for [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.300964] pci 0000:02:00.0: no compatible bridge window for [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.301967] pci 0000:03:06.0: no compatible bridge window for [mem 0xd0100000-0xd0100fff pref]
[ 0.303004] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.303006] reserve RAM buffer: 000000006fff0000 - 000000006fffffff
[ 0.307003] pnp: PnP ACPI init
[ 0.307987] ACPI: bus type pnp registered
[ 0.309129] ACPI Error: [TOM2] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 0.312962] ACPI Error: Method parse/execution failed [\_SB_.PCI0._CRS] (Node ffff88006d430d70), AE_NOT_FOUND (20110623/psparse-536)
[ 0.317998] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.318052] pnp 00:01: [irq 8]
[ 0.318053] pnp 00:01: [io 0x0070-0x0071]
[ 0.318072] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.318072] pnp 00:02: [io 0x0061]
[ 0.318072] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.318072] pnp 00:03: [dma 4]
[ 0.318072] pnp 00:03: [io 0x0000-0x000f]
[ 0.318072] pnp 00:03: [io 0x0081-0x0083]
[ 0.318072] pnp 00:03: [io 0x0087]
[ 0.318072] pnp 00:03: [io 0x0089-0x008b]
[ 0.318072] pnp 00:03: [io 0x008f]
[ 0.318072] pnp 00:03: [io 0x00c0-0x00df]
[ 0.318978] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.318984] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.318991] pnp 00:04: [irq 13]
[ 0.319010] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.319010] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 0.319010] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.319010] pnp: PnP ACPI: found 6 devices
[ 0.319968] ACPI: ACPI bus type pnp unregistered
[ 0.326398] Switching to clocksource acpi_pm
[ 0.326983] pci 0000:02:00.0: no compatible bridge window for [mem 0xd8200000-0xd820ffff pref]
[ 0.327386] Switched to NOHz mode on CPU #1
[ 0.339744] Switched to NOHz mode on CPU #0
[ 0.343943] PCI: max bus depth: 1 pci_try_num: 2
[ 0.343971] pci 0000:00:01.0: BAR 15: can't assign mem pref (size 0x10000000)
[ 0.351096] pci 0000:00:01.0: BAR 14: can't assign mem (size 0x200000)
[ 0.357613] pci 0000:00:0a.0: BAR 15: can't assign mem pref (size 0x100000)
[ 0.364565] pci 0000:00:14.4: BAR 15: can't assign mem pref (size 0x100000)
[ 0.371514] pci 0000:00:14.2: BAR 0: can't assign mem (size 0x4000)
[ 0.377772] pci 0000:00:14.2: BAR 0: trying firmware assignment [mem 0xd8300000-0xd8303fff 64bit]
[ 0.386625] pci 0000:00:14.2: BAR 0: assigned [mem 0xd8300000-0xd8303fff 64bit]
[ 0.393935] pci 0000:00:14.2: BAR 0: set to [mem 0xd8300000-0xd8303fff 64bit] (PCI address [0xd8300000-0xd8303fff])
[ 0.404344] pci 0000:00:01.0: BAR 13: can't assign io (size 0x1000)
[ 0.410602] pci 0000:00:0a.0: BAR 13: can't assign io (size 0x1000)
[ 0.416860] pci 0000:00:12.0: BAR 0: can't assign mem (size 0x1000)
[ 0.423117] pci 0000:00:12.0: BAR 0: trying firmware assignment [mem 0xd8304000-0xd8304fff]
[ 0.431451] pci 0000:00:12.0: BAR 0: assigned [mem 0xd8304000-0xd8304fff]
[ 0.438233] pci 0000:00:12.0: BAR 0: set to [mem 0xd8304000-0xd8304fff] (PCI address [0xd8304000-0xd8304fff])
[ 0.448128] pci 0000:00:12.1: BAR 0: can't assign mem (size 0x1000)
[ 0.454385] pci 0000:00:12.1: BAR 0: trying firmware assignment [mem 0xd8305000-0xd8305fff]
[ 0.462718] pci 0000:00:12.1: BAR 0: assigned [mem 0xd8305000-0xd8305fff]
[ 0.469501] pci 0000:00:12.1: BAR 0: set to [mem 0xd8305000-0xd8305fff] (PCI address [0xd8305000-0xd8305fff])
[ 0.479394] pci 0000:00:13.0: BAR 0: can't assign mem (size 0x1000)
[ 0.485652] pci 0000:00:13.0: BAR 0: trying firmware assignment [mem 0xd8306000-0xd8306fff]
[ 0.493986] pci 0000:00:13.0: BAR 0: assigned [mem 0xd8306000-0xd8306fff]
[ 0.500765] pci 0000:00:13.0: BAR 0: set to [mem 0xd8306000-0xd8306fff] (PCI address [0xd8306000-0xd8306fff])
[ 0.510662] pci 0000:00:13.1: BAR 0: can't assign mem (size 0x1000)
[ 0.516919] pci 0000:00:13.1: BAR 0: trying firmware assignment [mem 0xd8307000-0xd8307fff]
[ 0.525254] pci 0000:00:13.1: BAR 0: assigned [mem 0xd8307000-0xd8307fff]
[ 0.532033] pci 0000:00:13.1: BAR 0: set to [mem 0xd8307000-0xd8307fff] (PCI address [0xd8307000-0xd8307fff])
[ 0.541929] pci 0000:00:14.5: BAR 0: can't assign mem (size 0x1000)
[ 0.548187] pci 0000:00:14.5: BAR 0: trying firmware assignment [mem 0xd8308000-0xd8308fff]
[ 0.556519] pci 0000:00:14.5: BAR 0: assigned [mem 0xd8308000-0xd8308fff]
[ 0.563300] pci 0000:00:14.5: BAR 0: set to [mem 0xd8308000-0xd8308fff] (PCI address [0xd8308000-0xd8308fff])
[ 0.573193] pci 0000:00:11.0: BAR 5: can't assign mem (size 0x400)
[ 0.579367] pci 0000:00:11.0: BAR 5: trying firmware assignment [mem 0xd8309000-0xd83093ff]
[ 0.587700] pci 0000:00:11.0: BAR 5: assigned [mem 0xd8309000-0xd83093ff]
[ 0.594482] pci 0000:00:11.0: BAR 5: set to [mem 0xd8309000-0xd83093ff] (PCI address [0xd8309000-0xd83093ff])
[ 0.604375] pci 0000:00:12.2: BAR 0: can't assign mem (size 0x100)
[ 0.610548] pci 0000:00:12.2: BAR 0: trying firmware assignment [mem 0xd8309400-0xd83094ff]
[ 0.618880] pci 0000:00:12.2: BAR 0: assigned [mem 0xd8309400-0xd83094ff]
[ 0.625660] pci 0000:00:12.2: BAR 0: set to [mem 0xd8309400-0xd83094ff] (PCI address [0xd8309400-0xd83094ff])
[ 0.635554] pci 0000:00:13.2: BAR 0: can't assign mem (size 0x100)
[ 0.641727] pci 0000:00:13.2: BAR 0: trying firmware assignment [mem 0xd8309500-0xd83095ff]
[ 0.650060] pci 0000:00:13.2: BAR 0: assigned [mem 0xd8309500-0xd83095ff]
[ 0.656842] pci 0000:00:13.2: BAR 0: set to [mem 0xd8309500-0xd83095ff] (PCI address [0xd8309500-0xd83095ff])
[ 0.666736] pci 0000:00:11.0: BAR 4: can't assign io (size 0x10)
[ 0.672737] pci 0000:00:11.0: BAR 4: trying firmware assignment [io 0x3000-0x300f]
[ 0.680388] pci 0000:00:11.0: BAR 4: assigned [io 0x3000-0x300f]
[ 0.686474] pci 0000:00:11.0: BAR 4: set to [io 0x3000-0x300f] (PCI address [0x3000-0x300f])
[ 0.694985] pci 0000:00:14.1: BAR 4: can't assign io (size 0x10)
[ 0.700986] pci 0000:00:14.1: BAR 4: trying firmware assignment [io 0x3010-0x301f]
[ 0.708628] pci 0000:00:14.1: BAR 4: assigned [io 0x3010-0x301f]
[ 0.714715] pci 0000:00:14.1: BAR 4: set to [io 0x3010-0x301f] (PCI address [0x3010-0x301f])
[ 0.723219] pci 0000:00:11.0: BAR 0: can't assign io (size 0x8)
[ 0.729132] pci 0000:00:11.0: BAR 0: trying firmware assignment [io 0x3020-0x3027]
[ 0.736774] pci 0000:00:11.0: BAR 0: assigned [io 0x3020-0x3027]
[ 0.742862] pci 0000:00:11.0: BAR 0: set to [io 0x3020-0x3027] (PCI address [0x3020-0x3027])
[ 0.751375] pci 0000:00:11.0: BAR 2: can't assign io (size 0x8)
[ 0.757285] pci 0000:00:11.0: BAR 2: trying firmware assignment [io 0x3028-0x302f]
[ 0.764929] pci 0000:00:11.0: BAR 2: assigned [io 0x3028-0x302f]
[ 0.771018] pci 0000:00:11.0: BAR 2: set to [io 0x3028-0x302f] (PCI address [0x3028-0x302f])
[ 0.779530] pci 0000:00:11.0: BAR 1: can't assign io (size 0x4)
[ 0.785441] pci 0000:00:11.0: BAR 1: trying firmware assignment [io 0x3040-0x3043]
[ 0.793083] pci 0000:00:11.0: BAR 1: assigned [io 0x3040-0x3043]
[ 0.799171] pci 0000:00:11.0: BAR 1: set to [io 0x3040-0x3043] (PCI address [0x3040-0x3043])
[ 0.807674] pci 0000:00:11.0: BAR 3: can't assign io (size 0x4)
[ 0.813588] pci 0000:00:11.0: BAR 3: trying firmware assignment [io 0x3044-0x3047]
[ 0.821230] pci 0000:00:11.0: BAR 3: assigned [io 0x3044-0x3047]
[ 0.827318] pci 0000:00:11.0: BAR 3: set to [io 0x3044-0x3047] (PCI address [0x3044-0x3047])
[ 0.835832] pci 0000:01:05.0: BAR 0: can't assign mem pref (size 0x10000000)
[ 0.842869] pci 0000:01:05.0: BAR 0: trying firmware assignment [mem 0xc0000000-0xcfffffff pref]
[ 0.851632] pci 0000:01:05.0: BAR 0: assigned [mem 0xc0000000-0xcfffffff pref]
[ 0.858845] pci 0000:01:05.0: BAR 0: set to [mem 0xc0000000-0xcfffffff pref] (PCI address [0xc0000000-0xcfffffff])
[ 0.869171] pci 0000:01:05.0: BAR 5: can't assign mem (size 0x100000)
[ 0.875606] pci 0000:01:05.0: BAR 5: trying firmware assignment [mem 0xd8000000-0xd80fffff]
[ 0.883936] pci 0000:01:05.0: BAR 5: assigned [mem 0xd8000000-0xd80fffff]
[ 0.890715] pci 0000:01:05.0: BAR 5: set to [mem 0xd8000000-0xd80fffff] (PCI address [0xd8000000-0xd80fffff])
[ 0.900605] pci 0000:01:05.0: BAR 2: can't assign mem (size 0x10000)
[ 0.906951] pci 0000:01:05.0: BAR 2: trying firmware assignment [mem 0xd8100000-0xd810ffff]
[ 0.915290] pci 0000:01:05.0: BAR 2: assigned [mem 0xd8100000-0xd810ffff]
[ 0.922069] pci 0000:01:05.0: BAR 2: set to [mem 0xd8100000-0xd810ffff] (PCI address [0xd8100000-0xd810ffff])
[ 0.931958] pci 0000:01:05.1: BAR 0: can't assign mem (size 0x4000)
[ 0.938218] pci 0000:01:05.1: BAR 0: trying firmware assignment [mem 0xd8110000-0xd8113fff]
[ 0.946557] pci 0000:01:05.1: BAR 0: assigned [mem 0xd8110000-0xd8113fff]
[ 0.953338] pci 0000:01:05.1: BAR 0: set to [mem 0xd8110000-0xd8113fff] (PCI address [0xd8110000-0xd8113fff])
[ 0.963234] pci 0000:01:05.0: BAR 1: can't assign io (size 0x100)
[ 0.969320] pci 0000:01:05.0: BAR 1: trying firmware assignment [io 0x1000-0x10ff]
[ 0.976960] pci 0000:01:05.0: BAR 1: assigned [io 0x1000-0x10ff]
[ 0.983049] pci 0000:01:05.0: BAR 1: set to [io 0x1000-0x10ff] (PCI address [0x1000-0x10ff])
[ 0.991562] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.996791] pci 0000:02:00.0: BAR 6: can't assign mem pref (size 0x10000)
[ 1.003571] pci 0000:02:00.0: BAR 4: can't assign mem pref (size 0x4000)
[ 1.010271] pci 0000:02:00.0: BAR 4: trying firmware assignment [mem 0xd0000000-0xd0003fff 64bit pref]
[ 1.019559] pci 0000:02:00.0: BAR 4: assigned [mem 0xd0000000-0xd0003fff 64bit pref]
[ 1.027296] pci 0000:02:00.0: BAR 4: set to [mem 0xd0000000-0xd0003fff 64bit pref] (PCI address [0xd0000000-0xd0003fff])
[ 1.038137] pci 0000:02:00.0: BAR 2: can't assign mem pref (size 0x1000)
[ 1.044827] pci 0000:02:00.0: BAR 2: trying firmware assignment [mem 0xd0004000-0xd0004fff 64bit pref]
[ 1.054114] pci 0000:02:00.0: BAR 2: assigned [mem 0xd0004000-0xd0004fff 64bit pref]
[ 1.061847] pci 0000:02:00.0: BAR 2: set to [mem 0xd0004000-0xd0004fff 64bit pref] (PCI address [0xd0004000-0xd0004fff])
[ 1.072689] pci 0000:02:00.0: BAR 0: can't assign io (size 0x100)
[ 1.078774] pci 0000:02:00.0: BAR 0: trying firmware assignment [io 0x2000-0x20ff]
[ 1.086415] pci 0000:02:00.0: BAR 0: assigned [io 0x2000-0x20ff]
[ 1.092506] pci 0000:02:00.0: BAR 0: set to [io 0x2000-0x20ff] (PCI address [0x2000-0x20ff])
[ 1.101018] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 1.106247] pci 0000:03:06.0: BAR 0: can't assign mem pref (size 0x1000)
[ 1.112939] pci 0000:03:06.0: BAR 0: trying firmware assignment [mem 0xd0100000-0xd0100fff pref]
[ 1.121702] pci 0000:03:06.0: BAR 0: assigned [mem 0xd0100000-0xd0100fff pref]
[ 1.128916] pci 0000:03:06.0: BAR 0: set to [mem 0xd0100000-0xd0100fff pref] (PCI address [0xd0100000-0xd0100fff])
[ 1.139244] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 1.144487] pci 0000:00:0a.0: setting latency timer to 64
[ 1.144525] NET: Registered protocol family 2
[ 1.148922] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.156306] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 1.165050] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.172085] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.178698] TCP reno registered
[ 1.181846] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.187853] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.194353] NET: Registered protocol family 1
[ 1.198718] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 1.205702] pci 0000:01:05.0: Boot video device
[ 1.205712] PCI: CLS 64 bytes, default 64
[ 1.207635] audit: initializing netlink socket (disabled)
[ 1.213044] type=2000 audit(1324316282.212:1): initialized
[ 1.222504] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.233657] msgmni has been set to 3505
[ 1.237959] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.245364] io scheduler noop registered
[ 1.249303] io scheduler deadline registered
[ 1.253662] io scheduler cfq registered (default)
[ 1.258471] pcieport 0000:00:0a.0: setting latency timer to 64
[ 1.258515] pcieport 0000:00:0a.0: irq 40 for MSI/MSI-X
[ 1.258859] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.530157] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.593350] hpet_acpi_add: no address or irqs in _CRS
[ 1.598467] Linux agpgart interface v0.103
[ 1.603069] uvesafb: Getting VBE info block failed (eax=0x4f00, err=0)
[ 1.609598] uvesafb: vbe_init() failed with -22
[ 1.614129] uvesafb: probe of uvesafb.0 failed with error -22
[ 1.619953] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.628117] ACPI: Power Button [PWRB]
[ 1.631853] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.639243] ACPI: Power Button [PWRF]
[ 1.643069] ACPI: Fan [FAN0] (on)
[ 1.646441] ACPI: acpi_idle registered with cpuidle
[ 1.667058] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.672724] ACPI: Thermal Zone [TZ00] (40 C)
[ 1.679331] brd: module loaded
[ 1.683619] loop: module loaded
[ 1.687135] ahci 0000:00:11.0: version 3.0
[ 1.687151] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.694036] ahci 0000:00:11.0: irq 41 for MSI/MSI-X
[ 1.694136] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.702217] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.711610] scsi0 : ahci
[ 1.714329] scsi1 : ahci
[ 1.717052] scsi2 : ahci
[ 1.719739] scsi3 : ahci
[ 1.722460] ata1: SATA max UDMA/133 abar m1024 at 0xd8309000 port 0xd8309100 irq 41
[ 1.729846] ata2: SATA max UDMA/133 abar m1024 at 0xd8309000 port 0xd8309180 irq 41
[ 1.737234] ata3: SATA max UDMA/133 abar m1024 at 0xd8309000 port 0xd8309200 irq 41
[ 1.744618] ata4: SATA max UDMA/133 abar m1024 at 0xd8309000 port 0xd8309280 irq 41
[ 1.752431] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.759652] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.764624] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.769797] mousedev: PS/2 mouse device common for all mice
[ 1.775618] rtc_cmos 00:01: RTC can wake from S4
[ 1.780393] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.786517] rtc0: alarms up to one day, 114 bytes nvram
[ 1.791787] i2c /dev entries driver
[ 1.791930] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.804087] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel at redhat.com
[ 1.812649] cpuidle: using governor ladder
[ 1.816750] cpuidle: using governor menu
[ 1.820900] TCP cubic registered
[ 1.824484] NET: Registered protocol family 10
[ 1.829207] IPv6 over IPv4 tunneling driver
[ 1.833780] NET: Registered protocol family 17
[ 1.838423] registered taskstats version 1
[ 1.842746] Magic number: 7:848:643
[ 1.846464] powernow-k8: Found 1 AMD Athlon(tm) II X2 245e Processor (2 cpu cores) (version 2.20.00)
[ 1.855605] powernow-k8: 0 : pstate 0 (2900 MHz)
[ 1.860482] powernow-k8: 1 : pstate 1 (2100 MHz)
[ 2.067051] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.073261] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.078703] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.084159] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.090933] ata1.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
[ 2.097548] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.104700] ata3.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB03, max UDMA/33
[ 2.111306] ata3.00: applying bridge limits
[ 2.117600] ata1.00: configured for UDMA/133
[ 2.121883] ata3.00: configured for UDMA/33
[ 2.121960] scsi 0:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 80.0 PQ: 0 ANSI: 5
[ 2.134396] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.142038] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.142092] sd 0:0:0:0: [sda] Write Protect is off
[ 2.142095] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.142108] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.161181] sda: sda1 sda2 sda3 sda4
[ 2.165394] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.165682] scsi 2:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB03 PQ: 0 ANSI: 5
[ 2.174083] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.174086] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.174201] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.174275] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 2.201794] EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240)
[ 2.208053] Refined TSC clocksource calibration: 2907.446 MHz.
[ 2.208057] Switching to clocksource tsc
[ 2.224131] EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities
[ 2.259299] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.266951] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
[ 2.274518] Freeing unused kernel memory: 572k freed
[ 3.733179] udev[3812]: starting version 164
[ 3.851917] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 3.851921] Disabling lock debugging due to kernel taint
[ 3.875637] usbcore: registered new interface driver usbfs
[ 3.875648] usbcore: registered new interface driver hub
[ 3.881843] usbcore: registered new device driver usb
[ 3.885042] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.885070] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.885092] r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
[ 3.895287] r8169 0000:02:00.0: setting latency timer to 64
[ 3.895361] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 3.896221] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc9000061c000, ff:ff:ff:ff:ff:ff, XID 9cf0f8ff IRQ 42
[ 3.905050] IR NEC protocol handler initialized
[ 3.914830] IR RC5(x) protocol handler initialized
[ 3.918190] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.918225] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.918245] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 3.918252] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 3.918264] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.918294] ehci_hcd 0000:00:12.2: debug port 1
[ 3.918328] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd8309400
[ 3.920248] Mantis 0000:03:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 3.921382] DVB: registering new adapter (Mantis DVB adapter)
[ 3.923183] IR RC6 protocol handler initialized
[ 3.924028] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 3.924053] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.924056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.924058] usb usb1: Product: EHCI Host Controller
[ 3.924060] usb usb1: Manufacturer: Linux 3.1.5-gentoo ehci_hcd
[ 3.924062] usb usb1: SerialNumber: 0000:00:12.2
[ 3.924144] hub 1-0:1.0: USB hub found
[ 3.924148] hub 1-0:1.0: 6 ports detected
[ 3.924235] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.924256] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 3.924262] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 3.924273] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.924300] ehci_hcd 0000:00:13.2: debug port 1
[ 3.924335] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd8309500
[ 3.930015] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 3.930145] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.930148] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.930151] usb usb2: Product: EHCI Host Controller
[ 3.930153] usb usb2: Manufacturer: Linux 3.1.5-gentoo ehci_hcd
[ 3.930155] usb usb2: SerialNumber: 0000:00:13.2
[ 3.936309] hub 2-0:1.0: USB hub found
[ 3.936315] hub 2-0:1.0: 6 ports detected
[ 3.941542] [fglrx] Maximum main memory to use for locked dma buffers: 1638 MBytes.
[ 3.941610] [fglrx] vendor: 1002 device: 9616 count: 1
[ 3.942075] [fglrx] ioport: bar 1, base 0x1000, size: 0x100
[ 3.942097] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.942104] pci 0000:01:05.0: setting latency timer to 64
[ 3.942527] [fglrx] Kernel PAT support is enabled
[ 3.942545] [fglrx] module loaded - fglrx 8.88.7 [Jul 28 2011] with 1 minors
[ 3.943460] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.943489] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.943510] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 3.943517] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 3.943556] ohci_hcd 0000:00:12.0: irq 16, io mem 0xd8304000
[ 3.998045] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.998049] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.998052] usb usb3: Product: OHCI Host Controller
[ 3.998054] usb usb3: Manufacturer: Linux 3.1.5-gentoo ohci_hcd
[ 3.998055] usb usb3: SerialNumber: 0000:00:12.0
[ 3.998142] hub 3-0:1.0: USB hub found
[ 3.998150] hub 3-0:1.0: 3 ports detected
[ 3.998220] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.998245] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 3.998250] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 3.998273] ohci_hcd 0000:00:12.1: irq 16, io mem 0xd8305000
[ 4.053037] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.053040] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.053042] usb usb4: Product: OHCI Host Controller
[ 4.053044] usb usb4: Manufacturer: Linux 3.1.5-gentoo ohci_hcd
[ 4.053046] usb usb4: SerialNumber: 0000:00:12.1
[ 4.053103] hub 4-0:1.0: USB hub found
[ 4.053110] hub 4-0:1.0: 3 ports detected
[ 4.053165] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.053176] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 4.053181] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 4.053212] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd8306000
[ 4.101710] IR JVC protocol handler initialized
[ 4.108053] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.108056] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.108059] usb usb5: Product: OHCI Host Controller
[ 4.108061] usb usb5: Manufacturer: Linux 3.1.5-gentoo ohci_hcd
[ 4.108062] usb usb5: SerialNumber: 0000:00:13.0
[ 4.108151] hub 5-0:1.0: USB hub found
[ 4.108158] hub 5-0:1.0: 3 ports detected
[ 4.108231] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.108252] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 4.108258] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 4.108280] ohci_hcd 0000:00:13.1: irq 18, io mem 0xd8307000
[ 4.163040] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.163043] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.163045] usb usb6: Product: OHCI Host Controller
[ 4.163047] usb usb6: Manufacturer: Linux 3.1.5-gentoo ohci_hcd
[ 4.163049] usb usb6: SerialNumber: 0000:00:13.1
[ 4.163111] hub 6-0:1.0: USB hub found
[ 4.163118] hub 6-0:1.0: 3 ports detected
[ 4.163177] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.163188] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 4.163193] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 4.163210] ohci_hcd 0000:00:14.5: irq 18, io mem 0xd8308000
[ 4.218037] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.218040] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.218042] usb usb7: Product: OHCI Host Controller
[ 4.218045] usb usb7: Manufacturer: Linux 3.1.5-gentoo ohci_hcd
[ 4.218047] usb usb7: SerialNumber: 0000:00:14.5
[ 4.218106] hub 7-0:1.0: USB hub found
[ 4.218113] hub 7-0:1.0: 2 ports detected
[ 4.245919] IR Sony protocol handler initialized
[ 4.248212] IR MCE Keyboard/mouse protocol handler initialized
[ 4.486008] usb 6-2: new low speed USB device number 2 using ohci_hcd
[ 4.495977] lirc_dev: IR Remote Control driver registered, major 250
[ 4.496305] IR LIRC bridge handler initialized
[ 4.630842] usb 6-2: New USB device found, idVendor=15c2, idProduct=0038
[ 4.630845] usb 6-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.635303] input: iMON Panel, Knob and Mouse(15c2:0038) as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input3
[ 4.667006] Registered IR keymap rc-imon-pad
[ 4.667089] input: iMON Remote (15c2:0038) as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/rc/rc0/input4
[ 4.667121] rc0: iMON Remote (15c2:0038) as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/rc/rc0
[ 4.672036] imon 6-2:1.0: iMON device (15c2:0038, intf0) on usb<6:2> initialized
[ 4.672052] imon 6-2:1.1: iMON device (15c2:0038, intf1) on usb<6:2> initialized
[ 4.672065] usbcore: registered new interface driver imon
[ 4.672227] usbcore: registered new interface driver usbhid
[ 4.672230] usbhid: USB HID core driver
[ 4.779439] tda10021_attach: driver disabled by Kconfig
[ 4.780649] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...
[ 6.910203] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 6.979135] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 6.982838] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 7.007573] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 7.038870] EXT4-fs (dm-1): mounting ext2 file system using the ext4 subsystem
[ 7.043705] EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null)
[ 7.062363] EXT4-fs (dm-2): mounting ext2 file system using the ext4 subsystem
[ 7.067086] EXT4-fs (dm-2): mounted filesystem without journal. Opts: (null)
[ 7.102780] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 7.125005] EXT4-fs (dm-4): mounting ext2 file system using the ext4 subsystem
[ 7.129718] EXT4-fs (dm-4): mounted filesystem without journal. Opts: (null)
[ 7.165591] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[ 7.465589] Adding 1048572k swap on /dev/sda2. Priority:-1 extents:1 across:1048572k
[ 8.750766] syslog-ng (5061): Attempt to access syslog with CAP_SYS_ADMIN but no CAP_SYSLOG (deprecated).
[ 23.555634] NVRM: No NVIDIA graphics adapter found!
[ 28.171160] NVRM: No NVIDIA graphics adapter found!
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 490 bytes
Desc: This is a digitally signed message part.
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20111219/18e24b40/attachment.sig>
More information about the coreboot
mailing list