[coreboot] DUAL_VDD_BIT in cpu/amd/model_10xxx/fidvid.c

Vibrans, Frank Frank.Vibrans at amd.com
Wed Sep 29 23:53:39 CEST 2010


To determine whether the chip is in single or dual plane mode, you should read F3xA0[8].  If that bit is 1, the chip is operating in single plane mode and if it is 0, VDD and VDDNB are controlled separately through both the SVI and the PVI interfaces (the latter operating as an SVI).  See section of the BKDG.  The rest of the section 2.4.2 is interesting reading as well.


More information about the coreboot mailing list