[coreboot] [PATCH EHCI Debug Port setup for all AMD SB600/SB700 boards
Uwe Hermann
uwe at hermann-uwe.de
Fri Sep 24 20:18:45 CEST 2010
On Fri, Sep 24, 2010 at 05:43:57PM +0200, Stefan Reinauer wrote:
> On 9/23/10 11:09 PM, Uwe Hermann wrote:
> > For now I marked all chipsets where we have Debug Port code as untested,
> > I have a feeling the functionality was rarely tested recently (or at
> > all) so we should only mark those chipsets as tested where we actually
> > have recent test reports.
> Last time I tested on i945 I was able to get output if I called the
> debug port output function directly, but it seemed that you would not
> get any output from printk as it simply was not hooked up. Has that
> changed since then?
Hm, looks like it's hooked up in romstage.c on the Kontrol 986lcd-m at
the moment, yes. I'll test on another i945 board I have here.
> Acked-by: Stefan Reinauer <stepan at coresystems.de>
Thanks, r5833.
I fixed the order of the function calls to be the same in all romstage.c
files for now, further patches will appear soon I hope.
Uwe.
--
http://hermann-uwe.de | http://sigrok.org
http://randomprojects.org | http://unmaintained-free-software.org
More information about the coreboot
mailing list